linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: f.fainelli@gmail.com (Florian Fainelli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/8] MIPS: BCM63XX: add and use clkdev lookup support
Date: Tue, 15 Aug 2017 09:20:00 -0700	[thread overview]
Message-ID: <b180fcb8-0282-3bad-aad0-4f1faaea73b0@gmail.com> (raw)
In-Reply-To: <20170802093429.12572-1-jonas.gorski@gmail.com>



On 08/02/2017 02:34 AM, Jonas Gorski wrote:
> This patchset adds and uses clckdev lookup support to name input clocks
> in various drivers more closely to their functions, or simplify their
> usage.
> 
> Since most of these patches touch arch/mips, it probably makes most
> sense to go through the MIPS tree.
> 
> The HSSPI driver was already updated previously to support a "pll"
> input with ff18e1ef04e2 ("spi/bcm63xx-hsspi: allow providing clock rate
> through a second clock"), so there is no need to touch it.
> 
> This patch series is part of an effort to modernize BCM63XX and clean up
> its drivers to eventually make them usable with BMIPS and device tree.

For this entire series:

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

Thanks!

> 
> Jonas Gorski (8):
>   MIPS: BCM63XX: add clkdev lookup support
>   MIPS: BCM63XX: provide periph clock as refclk for uart
>   tty/bcm63xx_uart: use refclk for the expected clock name
>   tty/bcm63xx_uart: allow naming clock in device tree
>   MIPS: BCM63XX: provide enet clocks as "enet" to the ethernet devices
>   bcm63xx_enet: just use "enet" as the clock name
>   MIPS: BCM63XX: move the HSSPI PLL HZ into its own clock
>   MIPS: BMIPS: name the refclk clock for uart
> 
>  .../bindings/serial/brcm,bcm6345-uart.txt          |   6 +
>  arch/mips/Kconfig                                  |   1 +
>  arch/mips/bcm63xx/clk.c                            | 181 ++++++++++++++++-----
>  arch/mips/boot/dts/brcm/bcm3368.dtsi               |   2 +
>  arch/mips/boot/dts/brcm/bcm63268.dtsi              |   2 +
>  arch/mips/boot/dts/brcm/bcm6328.dtsi               |   2 +
>  arch/mips/boot/dts/brcm/bcm6358.dtsi               |   2 +
>  arch/mips/boot/dts/brcm/bcm6362.dtsi               |   2 +
>  arch/mips/boot/dts/brcm/bcm6368.dtsi               |   2 +
>  drivers/net/ethernet/broadcom/bcm63xx_enet.c       |   5 +-
>  drivers/tty/serial/bcm63xx_uart.c                  |   6 +-
>  11 files changed, 168 insertions(+), 43 deletions(-)
> 

-- 
Florian

      parent reply	other threads:[~2017-08-15 16:20 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-02  9:34 [PATCH 0/8] MIPS: BCM63XX: add and use clkdev lookup support Jonas Gorski
2017-08-02  9:34 ` [PATCH 1/8] MIPS: BCM63XX: add " Jonas Gorski
2017-08-02  9:34 ` [PATCH 2/8] MIPS: BCM63XX: provide periph clock as refclk for uart Jonas Gorski
2017-08-02  9:34 ` [PATCH 3/8] tty/bcm63xx_uart: use refclk for the expected clock name Jonas Gorski
2017-08-28 12:51   ` Greg Kroah-Hartman
2017-08-02  9:34 ` [PATCH 4/8] tty/bcm63xx_uart: allow naming clock in device tree Jonas Gorski
2017-08-10 16:25   ` Rob Herring
2017-09-06 11:01   ` Jonas Gorski
2017-09-06 12:17     ` Greg Kroah-Hartman
2017-09-06 12:37       ` Jonas Gorski
2017-08-02  9:34 ` [PATCH 5/8] MIPS: BCM63XX: provide enet clocks as "enet" to the ethernet devices Jonas Gorski
2017-08-02  9:34 ` [PATCH 6/8] bcm63xx_enet: just use "enet" as the clock name Jonas Gorski
2017-09-06 11:00   ` Jonas Gorski
2017-08-02  9:34 ` [PATCH 7/8] MIPS: BCM63XX: move the HSSPI PLL HZ into its own clock Jonas Gorski
2017-08-02  9:34 ` [PATCH 8/8] MIPS: BMIPS: name the refclk clock for uart Jonas Gorski
2017-08-15 16:20 ` Florian Fainelli [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b180fcb8-0282-3bad-aad0-4f1faaea73b0@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).