From: Patrice CHOTARD <patrice.chotard@foss.st.com>
To: Mark Brown <broonie@kernel.org>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Boris Brezillon <boris.brezillon@collabora.com>,
<linux-mtd@lists.infradead.org>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
<linux-spi@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <christophe.kerello@foss.st.com>
Subject: Re: [PATCH v3 0/3] MTD: spinand: Add spi_mem_poll_status() support
Date: Tue, 18 May 2021 13:28:24 +0200 [thread overview]
Message-ID: <b4fb34ad-b70f-b8b9-3fcb-09dd812acfa9@foss.st.com> (raw)
In-Reply-To: <20210518093951.23136-1-patrice.chotard@foss.st.com>
Just saw a missing update, i am sending a v4.
Sorry
Patrice
On 5/18/21 11:39 AM, patrice.chotard@foss.st.com wrote:
> From: Patrice Chotard <patrice.chotard@foss.st.com>
>
> This series adds support for the spi_mem_poll_status() spinand
> interface.
> Some QSPI controllers allows to poll automatically memory
> status during operations (erase, read or write). This allows to
> offload the CPU for this task.
> STM32 QSPI is supporting this feature, driver update are also
> part of this series.
>
> Chnages in v3:
> - Add spi_mem_read_status() which allows to read 8 or 16 bits status.
> - Add initial_delay_us and polling_delay_us parameters to spi_mem_poll_status().
> and also to poll_status() callback.
> - Move spi_mem_supports_op() in SW-based polling case.
> - Add delay before invoquing read_poll_timeout().
> - Remove the reinit/wait_for_completion() added in v2.
> - Add initial_delay_us and polling_delay_us parameters to spinand_wait().
> - Add SPINAND_READ/WRITE/ERASE/RESET_INITIAL_DELAY_US and
> SPINAND_READ/WRITE/ERASE/RESET_POLL_DELAY_US defines.
> - Remove spi_mem_finalize_op() API added in v2.
>
> Changes in v2:
> - Indicates the spi_mem_poll_status() timeout unit
> - Use 2-byte wide status register
> - Add spi_mem_supports_op() call in spi_mem_poll_status()
> - Add completion management in spi_mem_poll_status()
> - Add offload/non-offload case management in spi_mem_poll_status()
> - Optimize the non-offload case by using read_poll_timeout()
> - mask and match stm32_qspi_poll_status()'s parameters are 2-byte wide
> - Make usage of new spi_mem_finalize_op() API in
> stm32_qspi_wait_poll_status()
>
> Patrice Chotard (3):
> spi: spi-mem: add automatic poll status functions
> mtd: spinand: use the spi-mem poll status APIs
> spi: stm32-qspi: add automatic poll status feature
>
> drivers/mtd/nand/spi/core.c | 45 +++++++++++++------
> drivers/spi/spi-mem.c | 85 ++++++++++++++++++++++++++++++++++++
> drivers/spi/spi-stm32-qspi.c | 83 +++++++++++++++++++++++++++++++----
> include/linux/mtd/spinand.h | 11 ++++-
> include/linux/spi/spi-mem.h | 14 ++++++
> 5 files changed, 216 insertions(+), 22 deletions(-)
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2021-05-18 11:31 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-18 9:39 [PATCH v3 0/3] MTD: spinand: Add spi_mem_poll_status() support patrice.chotard
2021-05-18 9:39 ` [PATCH v3 1/3] spi: spi-mem: add automatic poll status functions patrice.chotard
2021-05-18 11:30 ` Boris Brezillon
2021-05-18 11:50 ` Patrice CHOTARD
2021-05-18 11:40 ` Boris Brezillon
2021-05-18 11:54 ` Patrice CHOTARD
2021-05-18 9:39 ` [PATCH v3 2/3] mtd: spinand: use the spi-mem poll status APIs patrice.chotard
2021-05-18 11:28 ` Boris Brezillon
2021-05-18 11:50 ` Patrice CHOTARD
2021-05-18 9:39 ` [PATCH v3 3/3] spi: stm32-qspi: add automatic poll status feature patrice.chotard
2021-05-18 11:39 ` Boris Brezillon
2021-05-18 11:53 ` Patrice CHOTARD
2021-05-18 11:28 ` Patrice CHOTARD [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b4fb34ad-b70f-b8b9-3fcb-09dd812acfa9@foss.st.com \
--to=patrice.chotard@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=boris.brezillon@collabora.com \
--cc=broonie@kernel.org \
--cc=christophe.kerello@foss.st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=miquel.raynal@bootlin.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).