* [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes
@ 2023-07-12 15:21 Lukasz Majewski
[not found] ` <20230726101902.769f6541@wsk>
0 siblings, 1 reply; 3+ messages in thread
From: Lukasz Majewski @ 2023-07-12 15:21 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski
Cc: devicetree, Conor Dooley, Alexandre Belloni, linux-kernel,
Lukasz Majewski, Claudiu Beznea, linux-arm-kernel
Without this change the KSZ9477-EVB board hangs just after passing
execution flow from u-boot to Linux kernel.
This code has been copied from at91-sama5d3_xplained.dts.
Test setup: Linux 6.5-rc1
Config: arch/arm/configs/sama5_defconfig
Toolchain: gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi
Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
.../boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
index 14af1fd6d247..99cd6d15998b 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
@@ -162,6 +162,18 @@
};
};
+&tcb0 {
+ timer0: timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>;
+ };
+
+ timer1: timer@1 {
+ compatible = "atmel,tcb-timer";
+ reg = <1>;
+ };
+};
+
&usb0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes
[not found] ` <20230726-igloo-science-96e926f086f6@spud>
@ 2023-07-27 5:37 ` claudiu beznea
0 siblings, 0 replies; 3+ messages in thread
From: claudiu beznea @ 2023-07-27 5:37 UTC (permalink / raw)
To: Conor Dooley, Lukasz Majewski
Cc: devicetree, Alexandre Belloni, linux-kernel, Conor Dooley,
Rob Herring, Krzysztof Kozlowski, Claudiu Beznea,
linux-arm-kernel
On 26.07.2023 21:33, Conor Dooley wrote:
> On Wed, Jul 26, 2023 at 10:19:02AM +0200, Lukasz Majewski wrote:
>> Dear Community,
>>
>>> Without this change the KSZ9477-EVB board hangs just after passing
>>> execution flow from u-boot to Linux kernel.
>>>
>>> This code has been copied from at91-sama5d3_xplained.dts.
>>>
>>> Test setup: Linux 6.5-rc1
>>> Config: arch/arm/configs/sama5_defconfig
>>> Toolchain: gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi
>>>
>>> Signed-off-by: Lukasz Majewski <lukma@denx.de>
>>> ---
>>> .../boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts | 12
>>> ++++++++++++ 1 file changed, 12 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
>>> b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts index
>>> 14af1fd6d247..99cd6d15998b 100644 ---
>>> a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts +++
>>> b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts @@ -162,6
>>> +162,18 @@ };
>>> };
>>>
>>> +&tcb0 {
>>> + timer0: timer@0 {
>>> + compatible = "atmel,tcb-timer";
>>> + reg = <0>;
>>> + };
>>> +
>>> + timer1: timer@1 {
>>> + compatible = "atmel,tcb-timer";
>>> + reg = <1>;
>>> + };
>>> +};
>>> +
>>> &usb0 {
>>> pinctrl-names = "default";
>>> pinctrl-0 = <&pinctrl_usba_vbus>;
>>
>> Gentle ping on this fix ...
>
> Claudiu has left Microchip, so things might've got a bit lost on the
> way. I've added his new address, Claudiu, will you take a look/pick this
> up please? I can also do it if that is easier for you.
It's on my list.
Thanks,
Claudiu
>
> Thanks,
> Conor.
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes
[not found] ` <20230726101902.769f6541@wsk>
[not found] ` <20230726-igloo-science-96e926f086f6@spud>
@ 2023-08-02 4:50 ` claudiu beznea
1 sibling, 0 replies; 3+ messages in thread
From: claudiu beznea @ 2023-08-02 4:50 UTC (permalink / raw)
To: Lukasz Majewski, Rob Herring, Krzysztof Kozlowski
Cc: devicetree, Conor Dooley, Alexandre Belloni, linux-kernel,
Claudiu Beznea, linux-arm-kernel
On 26.07.2023 11:19, Lukasz Majewski wrote:
> Dear Community,
>
>> Without this change the KSZ9477-EVB board hangs just after passing
>> execution flow from u-boot to Linux kernel.
>>
>> This code has been copied from at91-sama5d3_xplained.dts.
>>
>> Test setup: Linux 6.5-rc1
>> Config: arch/arm/configs/sama5_defconfig
>> Toolchain: gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi
>>
>> Signed-off-by: Lukasz Majewski <lukma@denx.de>
Applied to at91-dt, thanks!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-08-02 4:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-07-12 15:21 [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes Lukasz Majewski
[not found] ` <20230726101902.769f6541@wsk>
[not found] ` <20230726-igloo-science-96e926f086f6@spud>
2023-07-27 5:37 ` claudiu beznea
2023-08-02 4:50 ` claudiu beznea
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).