From: narmstrong@baylibre.com (Neil Armstrong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/8] drm/sun4i: sun4i_layer: Wire in the frontend
Date: Wed, 13 Dec 2017 17:11:18 +0100 [thread overview]
Message-ID: <ba92e085-6f76-b4c7-2195-ecc0dad69c83@baylibre.com> (raw)
In-Reply-To: <0cd2570c9cbe20d094cee0e8e9918c3a0f6af2fa.1513178989.git-series.maxime.ripard@free-electrons.com>
On 13/12/2017 16:33, Maxime Ripard wrote:
> Now that we have a driver, we can make use of it. This is done by
> adding a flag to our custom plane state that will trigger whether we should
> use the frontend on that particular plane or not.
>
> The rest is just plumbing to set up the backend to not perform the DMA but
> receive its data from the frontend.
>
> Note that we're still not making any use of the frontend itself, as no one
> is setting the flag yet.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
> drivers/gpu/drm/sun4i/sun4i_backend.c | 53 ++++++++++++++++++++++++++++-
> drivers/gpu/drm/sun4i/sun4i_backend.h | 3 ++-
> drivers/gpu/drm/sun4i/sun4i_layer.c | 27 ++++++++++++--
> drivers/gpu/drm/sun4i/sun4i_layer.h | 1 +-
> 4 files changed, 81 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c
> index e83e1fe43823..f1d19767c55d 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_backend.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
> @@ -26,6 +26,7 @@
>
> #include "sun4i_backend.h"
> #include "sun4i_drv.h"
> +#include "sun4i_frontend.h"
> #include "sun4i_layer.h"
> #include "sunxi_engine.h"
>
> @@ -203,6 +204,30 @@ int sun4i_backend_update_layer_formats(struct sun4i_backend *backend,
> return 0;
> }
>
> +int sun4i_backend_update_layer_frontend(struct sun4i_backend *backend,
> + int layer, uint32_t fmt)
> +{
> + u32 val;
> + int ret;
> +
> + ret = sun4i_backend_drm_format_to_layer(NULL, fmt, &val);
> + if (ret) {
> + DRM_DEBUG_DRIVER("Invalid format\n");
> + return ret;
> + }
> +
> + regmap_update_bits(backend->engine.regs,
> + SUN4I_BACKEND_ATTCTL_REG0(layer),
> + SUN4I_BACKEND_ATTCTL_REG0_LAY_VDOEN,
> + SUN4I_BACKEND_ATTCTL_REG0_LAY_VDOEN);
> +
> + regmap_update_bits(backend->engine.regs,
> + SUN4I_BACKEND_ATTCTL_REG1(layer),
> + SUN4I_BACKEND_ATTCTL_REG1_LAY_FBFMT, val);
> +
> + return 0;
> +}
> +
> int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend,
> int layer, struct drm_plane *plane)
> {
> @@ -330,6 +355,34 @@ static int sun4i_backend_of_get_id(struct device_node *node)
> return ret;
> }
>
> +static struct sun4i_frontend *sun4i_backend_find_frontend(struct sun4i_drv *drv,
> + struct device_node *node)
> +{
> + struct device_node *port, *ep, *remote;
> + struct sun4i_frontend *frontend;
> +
> + port = of_graph_get_port_by_id(node, 0);
> + if (!port)
> + return ERR_PTR(-EINVAL);
> +
> + for_each_available_child_of_node(port, ep) {
> + remote = of_graph_get_remote_port_parent(ep);
> + if (!remote)
> + continue;
> +
> + /* does this node match any registered engines? */
> + list_for_each_entry(frontend, &drv->frontend_list, list) {
> + if (remote == frontend->node) {
> + of_node_put(remote);
> + of_node_put(port);
> + return frontend;
> + }
> + }
> + }
> +
> + return ERR_PTR(-EINVAL);
> +}
> +
> static const struct sunxi_engine_ops sun4i_backend_engine_ops = {
> .commit = sun4i_backend_commit,
> .layers_init = sun4i_layers_init,
> diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.h b/drivers/gpu/drm/sun4i/sun4i_backend.h
> index ba1410fd5410..636a51521e77 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_backend.h
> +++ b/drivers/gpu/drm/sun4i/sun4i_backend.h
> @@ -72,6 +72,7 @@
> #define SUN4I_BACKEND_ATTCTL_REG0_LAY_PIPESEL(x) ((x) << 15)
> #define SUN4I_BACKEND_ATTCTL_REG0_LAY_PRISEL_MASK GENMASK(11, 10)
> #define SUN4I_BACKEND_ATTCTL_REG0_LAY_PRISEL(x) ((x) << 10)
> +#define SUN4I_BACKEND_ATTCTL_REG0_LAY_VDOEN BIT(1)
>
> #define SUN4I_BACKEND_ATTCTL_REG1(l) (0x8a0 + (0x4 * (l)))
> #define SUN4I_BACKEND_ATTCTL_REG1_LAY_HSCAFCT GENMASK(15, 14)
> @@ -171,5 +172,7 @@ int sun4i_backend_update_layer_formats(struct sun4i_backend *backend,
> int layer, struct drm_plane *plane);
> int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend,
> int layer, struct drm_plane *plane);
> +int sun4i_backend_update_layer_frontend(struct sun4i_backend *backend,
> + int layer, uint32_t in_fmt);
>
> #endif /* _SUN4I_BACKEND_H_ */
> diff --git a/drivers/gpu/drm/sun4i/sun4i_layer.c b/drivers/gpu/drm/sun4i/sun4i_layer.c
> index c3afcf888906..3b58667a06dc 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_layer.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_layer.c
> @@ -15,6 +15,7 @@
> #include <drm/drmP.h>
>
> #include "sun4i_backend.h"
> +#include "sun4i_frontend.h"
> #include "sun4i_layer.h"
> #include "sunxi_engine.h"
>
> @@ -70,21 +71,41 @@ static void sun4i_backend_layer_destroy_state(struct drm_plane *plane,
> static void sun4i_backend_layer_atomic_disable(struct drm_plane *plane,
> struct drm_plane_state *old_state)
> {
> + struct sun4i_layer_state *layer_state = state_to_sun4i_layer_state(old_state);
> struct sun4i_layer *layer = plane_to_sun4i_layer(plane);
> struct sun4i_backend *backend = layer->backend;
> + struct sun4i_frontend *frontend = backend->frontend;
>
> sun4i_backend_layer_enable(backend, layer->id, false);
> +
> + if (layer_state->uses_frontend)
> + sun4i_frontend_exit(frontend);
> }
>
> static void sun4i_backend_layer_atomic_update(struct drm_plane *plane,
> struct drm_plane_state *old_state)
> {
> + struct sun4i_layer_state *layer_state = state_to_sun4i_layer_state(plane->state);
> struct sun4i_layer *layer = plane_to_sun4i_layer(plane);
> struct sun4i_backend *backend = layer->backend;
> + struct sun4i_frontend *frontend = backend->frontend;
> +
> + if (layer_state->uses_frontend) {
> + sun4i_frontend_init(frontend);
> + sun4i_frontend_update_coord(frontend, plane);
> + sun4i_frontend_update_buffer(frontend, plane);
> + sun4i_frontend_update_formats(frontend, plane,
> + DRM_FORMAT_ARGB8888);
> + sun4i_backend_update_layer_frontend(backend, layer->id,
> + DRM_FORMAT_ARGB8888);
> + sun4i_backend_update_layer_coord(backend, layer->id, plane);
> + sun4i_frontend_enable(frontend);
> + } else {
> + sun4i_backend_update_layer_coord(backend, layer->id, plane);
> + sun4i_backend_update_layer_formats(backend, layer->id, plane);
> + sun4i_backend_update_layer_buffer(backend, layer->id, plane);
> + }
>
> - sun4i_backend_update_layer_coord(backend, layer->id, plane);
> - sun4i_backend_update_layer_formats(backend, layer->id, plane);
> - sun4i_backend_update_layer_buffer(backend, layer->id, plane);
> sun4i_backend_layer_enable(backend, layer->id, true);
> }
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_layer.h b/drivers/gpu/drm/sun4i/sun4i_layer.h
> index d2c19348d1b0..75b4868ba87c 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_layer.h
> +++ b/drivers/gpu/drm/sun4i/sun4i_layer.h
> @@ -24,6 +24,7 @@ struct sun4i_layer {
>
> struct sun4i_layer_state {
> struct drm_plane_state state;
> + bool uses_frontend;
> };
>
> static inline struct sun4i_layer *
>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
next prev parent reply other threads:[~2017-12-13 16:11 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1513181781-0808628882.0a9bc10eb7@prakkezator.vehosting.nl>
2017-12-13 15:33 ` [PATCH 0/8] drm/sun4i: Support the Display Engine frontend Maxime Ripard
2017-12-13 15:33 ` [PATCH 1/8] drm/sun4i: backend: Move line stride setup to buffer setup function Maxime Ripard
2017-12-13 16:03 ` Neil Armstrong
2017-12-13 15:33 ` [PATCH 2/8] drm/sun4i: backend: Allow a NULL plane pointer to retrieve the format Maxime Ripard
2017-12-13 16:03 ` Neil Armstrong
2017-12-13 15:33 ` [PATCH 3/8] drm/sun4i: sun4i_layer: Add a custom plane state Maxime Ripard
2017-12-13 16:05 ` Neil Armstrong
2017-12-13 15:33 ` [PATCH 4/8] drm/sun4i: crtc: Add a custom crtc atomic_check Maxime Ripard
2017-12-13 16:06 ` Neil Armstrong
2017-12-13 15:33 ` [PATCH 5/8] drm/sun4i: Add a driver for the display frontend Maxime Ripard
2017-12-13 16:10 ` Neil Armstrong
2017-12-16 7:00 ` kbuild test robot
2017-12-13 15:33 ` [PATCH 6/8] drm/sun4i: sun4i_layer: Wire in the frontend Maxime Ripard
2017-12-13 16:11 ` Neil Armstrong [this message]
2017-12-13 16:23 ` Thomas van Kleef
2017-12-14 10:32 ` Maxime Ripard
2017-12-16 9:17 ` kbuild test robot
2017-12-13 15:33 ` [PATCH 7/8] drm/sun4i: sun4i_layer: Add a custom atomic_check for " Maxime Ripard
2017-12-13 16:12 ` Neil Armstrong
2017-12-13 15:33 ` [PATCH 8/8] ARM: dts: sun8i: a33 Enable our display frontend Maxime Ripard
2017-12-13 16:16 ` [PATCH 0/8] drm/sun4i: Support the Display Engine frontend Thomas van Kleef
2017-12-14 8:35 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ba92e085-6f76-b4c7-2195-ecc0dad69c83@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox