From: eric.auger@redhat.com (Auger Eric)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 20/26] KVM: arm/arm64: GICv4: Use the doorbell interrupt as an unblocking source
Date: Tue, 7 Nov 2017 22:45:58 +0100 [thread overview]
Message-ID: <badc7dbf-bbfa-cf50-ea45-52e5e1eb8f9f@redhat.com> (raw)
In-Reply-To: <20171027142855.21584-21-marc.zyngier@arm.com>
Hi,
On 27/10/2017 16:28, Marc Zyngier wrote:
> The doorbell interrupt is only useful if the vcpu is blocked on WFI.
> In all other cases, recieving a doorbell interrupt is just a waste
> of cycles.
>
> So let's only enable the doorbell if a vcpu is getting blocked,
> and disable it when it is unblocked. This is very similar to
> what we're doing for the background timer.
>
> Reviewed-by: Christoffer Dall <cdall@linaro.org>
> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Eric
> ---
> include/kvm/arm_vgic.h | 3 +++
> virt/kvm/arm/arm.c | 2 ++
> virt/kvm/arm/vgic/vgic-v4.c | 18 ++++++++++++++++++
> 3 files changed, 23 insertions(+)
>
> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
> index 2f750c770bf2..8c896540a72c 100644
> --- a/include/kvm/arm_vgic.h
> +++ b/include/kvm/arm_vgic.h
> @@ -381,4 +381,7 @@ int kvm_vgic_v4_set_forwarding(struct kvm *kvm, int irq,
> int kvm_vgic_v4_unset_forwarding(struct kvm *kvm, int irq,
> struct kvm_kernel_irq_routing_entry *irq_entry);
>
> +void kvm_vgic_v4_enable_doorbell(struct kvm_vcpu *vcpu);
> +void kvm_vgic_v4_disable_doorbell(struct kvm_vcpu *vcpu);
> +
> #endif /* __KVM_ARM_VGIC_H */
> diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
> index 8388c1cc23f6..092a4ec03e57 100644
> --- a/virt/kvm/arm/arm.c
> +++ b/virt/kvm/arm/arm.c
> @@ -316,11 +316,13 @@ int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
> void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu)
> {
> kvm_timer_schedule(vcpu);
> + kvm_vgic_v4_enable_doorbell(vcpu);
> }
>
> void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu)
> {
> kvm_timer_unschedule(vcpu);
> + kvm_vgic_v4_disable_doorbell(vcpu);
> }
>
> int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
> diff --git a/virt/kvm/arm/vgic/vgic-v4.c b/virt/kvm/arm/vgic/vgic-v4.c
> index ea898af1a7a9..1a2f2fcdfa67 100644
> --- a/virt/kvm/arm/vgic/vgic-v4.c
> +++ b/virt/kvm/arm/vgic/vgic-v4.c
> @@ -237,3 +237,21 @@ int kvm_vgic_v4_unset_forwarding(struct kvm *kvm, int virq,
> mutex_unlock(&its->its_lock);
> return ret;
> }
> +
> +void kvm_vgic_v4_enable_doorbell(struct kvm_vcpu *vcpu)
> +{
> + if (vgic_supports_direct_msis(vcpu->kvm)) {
> + int irq = vcpu->arch.vgic_cpu.vgic_v3.its_vpe.irq;
> + if (irq)
> + enable_irq(irq);
> + }
> +}
> +
> +void kvm_vgic_v4_disable_doorbell(struct kvm_vcpu *vcpu)
> +{
> + if (vgic_supports_direct_msis(vcpu->kvm)) {
> + int irq = vcpu->arch.vgic_cpu.vgic_v3.its_vpe.irq;
> + if (irq)
> + disable_irq(irq);
> + }
> +}
>
next prev parent reply other threads:[~2017-11-07 21:45 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-27 14:28 [PATCH v5 00/26] KVM/ARM: Add support for GICv4 Marc Zyngier
2017-10-27 14:28 ` [PATCH v5 01/26] irqchip/gic-v3-its: Setup VLPI properties at map time Marc Zyngier
2017-10-30 6:46 ` Christoffer Dall
2017-10-27 14:28 ` [PATCH v5 02/26] KVM: arm/arm64: register irq bypass consumer on ARM/ARM64 Marc Zyngier
2017-10-30 6:47 ` Christoffer Dall
2017-10-27 14:28 ` [PATCH v5 03/26] KVM: arm/arm64: vgic: restructure kvm_vgic_(un)map_phys_irq Marc Zyngier
2017-10-27 14:28 ` [PATCH v5 04/26] KVM: arm: Select ARM_GIC_V3 and ARM_GIC_V3_ITS Marc Zyngier
2017-10-27 14:28 ` [PATCH v5 05/26] KVM: arm/arm64: vgic: Move kvm_vgic_destroy call around Marc Zyngier
2017-10-27 14:28 ` [PATCH v5 06/26] KVM: arm/arm64: vITS: Add MSI translation helpers Marc Zyngier
2017-11-07 20:34 ` Auger Eric
2017-10-27 14:28 ` [PATCH v5 07/26] KVM: arm/arm64: vITS: Add a helper to update the affinity of an LPI Marc Zyngier
2017-11-07 13:44 ` Auger Eric
2017-10-27 14:28 ` [PATCH v5 08/26] KVM: arm/arm64: GICv4: Add property field and per-VM predicate Marc Zyngier
2017-11-07 20:30 ` Auger Eric
2017-10-27 14:28 ` [PATCH v5 09/26] KVM: arm/arm64: GICv4: Add init/teardown of the per-VM vPE irq domain Marc Zyngier
2017-11-07 13:08 ` Auger Eric
2017-11-10 8:20 ` Christoffer Dall
2017-11-10 8:55 ` Marc Zyngier
2017-11-07 13:09 ` Auger Eric
2017-10-27 14:28 ` [PATCH v5 10/26] KVM: arm/arm64: GICv4: Wire mapping/unmapping of VLPIs in VFIO irq bypass Marc Zyngier
2017-11-07 13:06 ` Auger Eric
2017-11-07 14:42 ` Marc Zyngier
2017-11-07 15:59 ` Auger Eric
2017-11-08 11:30 ` Marc Zyngier
2017-11-10 8:28 ` Christoffer Dall
2017-11-10 9:05 ` Marc Zyngier
2017-11-10 9:41 ` Christoffer Dall
2017-10-27 14:28 ` [PATCH v5 11/26] KVM: arm/arm64: GICv4: Handle INT command applied to a VLPI Marc Zyngier
2017-11-07 20:15 ` Auger Eric
2017-11-08 11:40 ` Marc Zyngier
2017-11-08 14:14 ` Auger Eric
2017-10-27 14:28 ` [PATCH v5 12/26] KVM: arm/arm64: GICv4: Unmap VLPI when freeing an LPI Marc Zyngier
2017-11-07 20:28 ` Auger Eric
2017-11-08 11:52 ` Marc Zyngier
2017-11-08 14:14 ` Auger Eric
2017-10-27 14:28 ` [PATCH v5 13/26] KVM: arm/arm64: GICv4: Propagate affinity changes to the physical ITS Marc Zyngier
2017-11-07 21:01 ` Auger Eric
2017-11-08 12:05 ` Marc Zyngier
2017-10-27 14:28 ` [PATCH v5 14/26] KVM: arm/arm64: GICv4: Handle CLEAR applied to a VLPI Marc Zyngier
2017-11-07 21:04 ` Auger Eric
2017-10-27 14:28 ` [PATCH v5 15/26] KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE Marc Zyngier
2017-11-07 21:06 ` Auger Eric
2017-10-27 14:28 ` [PATCH v5 16/26] KVM: arm/arm64: GICv4: Propagate property updates to VLPIs Marc Zyngier
2017-11-07 21:28 ` Auger Eric
2017-11-08 15:08 ` Marc Zyngier
2017-11-10 8:37 ` Christoffer Dall
2017-11-10 8:58 ` Marc Zyngier
2017-10-27 14:28 ` [PATCH v5 17/26] KVM: arm/arm64: GICv4: Handle INVALL applied to a vPE Marc Zyngier
2017-11-07 21:23 ` Auger Eric
2017-11-10 8:41 ` Christoffer Dall
2017-11-10 8:56 ` Marc Zyngier
2017-10-27 14:28 ` [PATCH v5 18/26] KVM: arm/arm64: GICv4: Use pending_last as a scheduling hint Marc Zyngier
2017-11-07 21:38 ` Auger Eric
2017-10-27 14:28 ` [PATCH v5 19/26] KVM: arm/arm64: GICv4: Add doorbell interrupt handling Marc Zyngier
2017-11-07 21:43 ` Auger Eric
2017-10-27 14:28 ` [PATCH v5 20/26] KVM: arm/arm64: GICv4: Use the doorbell interrupt as an unblocking source Marc Zyngier
2017-11-07 21:45 ` Auger Eric [this message]
2017-10-27 14:28 ` [PATCH v5 21/26] KVM: arm/arm64: GICv4: Hook vPE scheduling into vgic flush/sync Marc Zyngier
2017-11-07 21:54 ` Auger Eric
2017-11-07 22:14 ` Auger Eric
2017-10-27 14:28 ` [PATCH v5 22/26] KVM: arm/arm64: GICv4: Enable virtual cpuif if VLPIs can be delivered Marc Zyngier
2017-11-08 8:46 ` Auger Eric
2017-10-27 14:28 ` [PATCH v5 23/26] KVM: arm/arm64: GICv4: Prevent a VM using GICv4 from being saved Marc Zyngier
2017-11-07 15:24 ` Auger Eric
2017-11-07 15:38 ` Marc Zyngier
2017-11-07 16:12 ` Auger Eric
2017-11-07 16:34 ` Marc Zyngier
2017-11-07 22:24 ` Auger Eric
2017-11-08 9:35 ` Auger Eric
2017-10-27 14:28 ` [PATCH v5 24/26] KVM: arm/arm64: GICv4: Prevent userspace from changing doorbell affinity Marc Zyngier
2017-10-30 6:51 ` Christoffer Dall
2017-11-07 22:17 ` Auger Eric
2017-10-27 14:28 ` [PATCH v5 25/26] KVM: arm/arm64: GICv4: Enable VLPI support Marc Zyngier
2017-11-08 8:44 ` Auger Eric
2017-11-08 15:14 ` Marc Zyngier
2017-10-27 14:28 ` [PATCH v5 26/26] KVM: arm/arm64: GICv4: Theory of operations Marc Zyngier
2017-11-08 9:13 ` Auger Eric
2017-11-08 15:19 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=badc7dbf-bbfa-cf50-ea45-52e5e1eb8f9f@redhat.com \
--to=eric.auger@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).