From mboxrd@z Thu Jan 1 00:00:00 1970 From: sean.wang@mediatek.com (sean.wang at mediatek.com) Date: Fri, 23 Feb 2018 18:16:26 +0800 Subject: [PATCH v1 06/19] arm: dts: mt7623: fix USB initialization fails on bananapi-r2 In-Reply-To: References: Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Sean Wang Fix that USB initialization fails as below runtime log is present during booting on bananapi-r2 board by adding missing regulators the USB device requires. Current regulators USB device uses are being updated with the correct ones to reflect real configurations which are all from fixed regulators rather than MT6323 one's output. [ 6.473958] xhci-mtk 1a1c0000.usb: fail to get vbus [ 6.479313] xhci-mtk 1a240000.usb: fail to get vbus Cc: stable at vger.kernel.org Fixes: f4ff257cd160 ("arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board") Signed-off-by: Sean Wang --- arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index ec11e14..f660d15 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -39,6 +39,24 @@ }; }; + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + gpio_keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -502,12 +520,14 @@ }; &usb1 { - vusb33-supply = <&mt6323_vusb_reg>; + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; status = "okay"; }; &usb2 { - vusb33-supply = <&mt6323_vusb_reg>; + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; status = "okay"; }; -- 2.7.4