* [PATCH v3 0/2] Add support for the pine64 Pinebook Pro @ 2020-02-29 14:48 Tobias Schramm 2020-02-29 14:48 ` [PATCH v3 1/2] dt-bindings: Add doc for " Tobias Schramm 2020-02-29 14:48 ` [PATCH v3 2/2] arm64: dts: rockchip: Add initial support for " Tobias Schramm 0 siblings, 2 replies; 7+ messages in thread From: Tobias Schramm @ 2020-02-29 14:48 UTC (permalink / raw) To: Rob Herring, Mark Rutland, Heiko Stuebner, Andy Yan, Johan Jonker Cc: linux-arm-kernel, devicetree, Alexis Ballier, Tobias Schramm, Katsuhiro Suzuki, linux-kernel, Douglas Anderson, Kever Yang, Markus Reichl, linux-rockchip, Matthias Kaehlcke, Jagan Teki, Nick Xie, Vivek Unune This patchset adds an initial dts and compatible string for the rk3399 based Pinebook Pro 14" laptop. This is version 3 of the original patchset with additional fixes proposed by Johan. Contrary to the Rockchip BSP dts proposed mid January this dts has a power tree reflecting the actual schematic of the device and features full display, audio and WiFi/Bluetooth support. Changelog: v2: Incorporate review by Heiko v3: Add fixes suggested by Johan Tobias Schramm (2): dt-bindings: Add doc for pine64 Pinebook Pro arm64: dts: rockchip: Add initial support for Pinebook Pro .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 1105 +++++++++++++++++ 3 files changed, 1111 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts -- 2.24.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v3 1/2] dt-bindings: Add doc for pine64 Pinebook Pro 2020-02-29 14:48 [PATCH v3 0/2] Add support for the pine64 Pinebook Pro Tobias Schramm @ 2020-02-29 14:48 ` Tobias Schramm 2020-03-01 0:42 ` Heiko Stuebner 2020-02-29 14:48 ` [PATCH v3 2/2] arm64: dts: rockchip: Add initial support for " Tobias Schramm 1 sibling, 1 reply; 7+ messages in thread From: Tobias Schramm @ 2020-02-29 14:48 UTC (permalink / raw) To: Rob Herring, Mark Rutland, Heiko Stuebner, Andy Yan, Johan Jonker Cc: linux-arm-kernel, devicetree, Alexis Ballier, Tobias Schramm, Katsuhiro Suzuki, linux-kernel, Douglas Anderson, Kever Yang, Markus Reichl, linux-rockchip, Matthias Kaehlcke, Jagan Teki, Nick Xie, Vivek Unune This commit adds a compatible for the Pinebook Pro. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 874b0eaa2a75..482a0cbfb18a 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -402,6 +402,11 @@ properties: - const: phytec,rk3288-phycore-som - const: rockchip,rk3288 + - description: Pine64 Pinebook Pro + items: + - const: pine64,pinebook-pro + - const: rockchip,rk3399 + - description: Pine64 Rock64 items: - const: pine64,rock64 -- 2.24.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v3 1/2] dt-bindings: Add doc for pine64 Pinebook Pro 2020-02-29 14:48 ` [PATCH v3 1/2] dt-bindings: Add doc for " Tobias Schramm @ 2020-03-01 0:42 ` Heiko Stuebner 0 siblings, 0 replies; 7+ messages in thread From: Heiko Stuebner @ 2020-03-01 0:42 UTC (permalink / raw) To: Tobias Schramm Cc: Mark Rutland, devicetree, Alexis Ballier, Katsuhiro Suzuki, linux-kernel, Douglas Anderson, Kever Yang, Markus Reichl, linux-rockchip, Rob Herring, Jagan Teki, Nick Xie, Andy Yan, Johan Jonker, Matthias Kaehlcke, Vivek Unune, linux-arm-kernel Am Samstag, 29. Februar 2020, 15:48:16 CET schrieb Tobias Schramm: > This commit adds a compatible for the Pinebook Pro. > > Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> The old patch from Emmanuel already got an Reviewed-by: Rob Herring <robh@kernel.org> and as this is the same binding, this should just be kept :-) [Mainly for me to remember as well] Heiko > --- > Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml > index 874b0eaa2a75..482a0cbfb18a 100644 > --- a/Documentation/devicetree/bindings/arm/rockchip.yaml > +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml > @@ -402,6 +402,11 @@ properties: > - const: phytec,rk3288-phycore-som > - const: rockchip,rk3288 > > + - description: Pine64 Pinebook Pro > + items: > + - const: pine64,pinebook-pro > + - const: rockchip,rk3399 > + > - description: Pine64 Rock64 > items: > - const: pine64,rock64 > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v3 2/2] arm64: dts: rockchip: Add initial support for Pinebook Pro 2020-02-29 14:48 [PATCH v3 0/2] Add support for the pine64 Pinebook Pro Tobias Schramm 2020-02-29 14:48 ` [PATCH v3 1/2] dt-bindings: Add doc for " Tobias Schramm @ 2020-02-29 14:48 ` Tobias Schramm 2020-03-03 15:37 ` Johan Jonker 1 sibling, 1 reply; 7+ messages in thread From: Tobias Schramm @ 2020-02-29 14:48 UTC (permalink / raw) To: Rob Herring, Mark Rutland, Heiko Stuebner, Andy Yan, Johan Jonker Cc: linux-arm-kernel, devicetree, Alexis Ballier, Tobias Schramm, Katsuhiro Suzuki, linux-kernel, Douglas Anderson, Kever Yang, Markus Reichl, linux-rockchip, Matthias Kaehlcke, Jagan Teki, Nick Xie, Vivek Unune This commit adds initial dt support for the rk3399 based Pinebook Pro. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 1105 +++++++++++++++++ 2 files changed, 1106 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 60d9437096c7..ae7621309e92 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts new file mode 100644 index 000000000000..dfade7e00051 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -0,0 +1,1105 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org> + */ + +/dts-v1/; +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/usb/pd.h> +#include <dt-bindings/leds/common.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Pine64 Pinebook Pro"; + compatible = "pine64,pinebook-pro", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + backlight: edp-backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_12v>; + pwms = <&pwm0 0 740740 0>; + }; + + edp_panel: edp-panel { + compatible = "boe,nv140fhmn49"; + backlight = <&backlight>; + enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_en_gpio>; + power-supply = <&vcc3v3_panel>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + panel_in_edp: endpoint@0 { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + }; + + /* + * Use separate nodes for gpio-keys to allow for selective deactivation + * of wakeup sources via sysfs without disabling the whole key + */ + gpio-key-lid { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&lidbtn_gpio>; + + lid { + debounce-interval = <20>; + gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>; + label = "Lid"; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; + wakeup-source; + }; + }; + + gpio-key-power { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn_gpio>; + + power { + debounce-interval = <20>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pwrled_gpio &slpled_gpio>; + + green-led { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + function = LED_FUNCTION_POWER; + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + label = "green:power"; + }; + + red-led { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_STANDBY; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + label = "red:standby"; + panic-indicator; + retain-state-suspended; + }; + }; + + /* Power sequence for SDIO WiFi module */ + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h_gpio>; + post-power-on-delay-ms = <100>; + power-off-delay-us = <500000>; + + /* WL_REG_ON on module */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + /* Audio components */ + es8316-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det_gpio>; + simple-audio-card,name = "rockchip,es8316-codec"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Speaker"; + simple-audio-card,routing = + "MIC1", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Speaker Amplifier INL", "HPOL", + "Speaker Amplifier INR", "HPOR", + "Speaker", "Speaker Amplifier OUTL", + "Speaker", "Speaker Amplifier OUTR"; + + simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>; + simple-audio-card,aux-devs = <&speaker_amp>; + simple-audio-card,pin-switches = "Speaker"; + + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + + simple-audio-card,codec { + sound-dai = <&es8316>; + }; + }; + + speaker_amp: speaker-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Speaker Amplifier"; + VCC-supply = <&pa_5v>; + }; + + /* Power tree */ + /* Root power source */ + vcc_sysin: vcc-sysin { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_sysin"; + }; + + /* Regulators supplied by vcc_sysin */ + /* LCD backlight supply */ + vcc_12v: vcc-12v { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-name = "vcc_12v"; + vin-supply = <&vcc_sysin>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* Main 3.3 V supply */ + vcc3v3_sys: wifi_bat: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_sys"; + vin-supply = <&vcc_sysin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + /* 5 V USB power supply */ + vcc5v0_usb: pa_5v: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_5v_gpio>; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_usb"; + vin-supply = <&vcc_sysin>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* RK3399 logic supply */ + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd_log"; + vin-supply = <&vcc_sysin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + /* Regulators supplied by vcc3v3_sys */ + /* 0.9 V supply, always on */ + vcc_0v9: vcc-0v9 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vcc_0v9"; + vin-supply = <&vcc3v3_sys>; + }; + + /* S3 1.8 V supply, switched by vcc1v8_s3 */ + vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_s3"; + vin-supply = <&vcc3v3_sys>; + }; + + /* micro SD card power */ + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwr_h_gpio>; + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc3v0_sd"; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* LCD panel power, called VCC3V3_S0 in schematic */ + vcc3v3_panel: vcc3v3-panel { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcdvcc_en_gpio>; + regulator-always-on; + regulator-enable-ramp-delay = <100000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_panel"; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* M.2 adapter power, switched by vcc1v8_s3 */ + vcc3v3_ssd: vcc3v3-ssd { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_ssd"; + vin-supply = <&vcc3v3_sys>; + }; + + /* Regulators supplied by vcc5v0_usb */ + /* USB 3 port power supply regulator */ + vcc5v0_otg: vcc5v0-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en_gpio>; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_otg"; + vin-supply = <&vcc5v0_usb>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* Regulators supplied by vcc5v0_usb */ + /* Type C port power supply regulator */ + vbus_5vout: vbus_typec: vbus-5vout { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec0_en_gpio>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vbus_5vout"; + vin-supply = <&vcc5v0_usb>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* Regulators supplied by vcc_1v8 */ + /* Primary 0.9 V LDO */ + vcca0v9_s3: vcca0v9-s3 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc0v9_s3"; + vin-supply = <&vcc_1v8>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + mains_charger: dc-charger { + compatible = "gpio-charger"; + charger-type = "mains"; + gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>; + + /* Also triggered by USB charger */ + pinctrl-names = "default"; + pinctrl-0 = <&dc_det_gpio>; + }; +}; + +&cdn_dp { + status = "okay"; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&edp { + force-hpd; + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; + status = "okay"; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +&emmc_phy { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio3>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l_gpio>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sysin>; + vcc2-supply = <&vcc_sysin>; + vcc3-supply = <&vcc_sysin>; + vcc4-supply = <&vcc_sysin>; + vcc6-supply = <&vcc_sysin>; + vcc7-supply = <&vcc_sysin>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sysin>; + vcc10-supply = <&vcc_sysin>; + vcc11-supply = <&vcc_sysin>; + vcc12-supply = <&vcc3v3_sys>; + vcc13-supply = <&vcc_sysin>; + vcc14-supply = <&vcc_sysin>; + + regulators { + /* rk3399 center logic supply */ + vdd_center: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_center"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_cpu_l"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: vcc_wl: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + /* not used */ + LDO_REG1 { + }; + + /* not used */ + LDO_REG2 { + }; + + vcc1v8_pmupll: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8_pmupll"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc_sdio"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcca3v0_codec"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc_1v5"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_codec"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc_3v0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc3v3_s3"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-always-on; + regulator-boot-on; + regulator-compatible = "fan53555-reg"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_cpu_b"; + regulator-ramp-delay = <1000>; + vin-supply = <&vcc_1v8>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-always-on; + regulator-boot-on; + regulator-compatible = "fan53555-reg"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_gpu"; + regulator-ramp-delay = <1000>; + vin-supply = <&vcc_1v8>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + i2c-scl-falling-time-ns = <4>; + i2c-scl-rising-time-ns = <168>; + status = "okay"; + + es8316: es8316@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&i2c3 { + i2c-scl-falling-time-ns = <15>; + i2c-scl-rising-time-ns = <450>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-falling-time-ns = <20>; + i2c-scl-rising-time-ns = <600>; + status = "okay"; + + fusb0: fusb30x@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int_gpio>; + status = "okay"; + vbus-supply = <&vbus_typec>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + op-sink-microwatt = <1000000>; + power-role = "dual"; + sink-pdos = + <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>; + source-pdos = + <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>; + try-power-role = "sink"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + usbc_hs: endpoint { + remote-endpoint = + <&u2phy0_typec_hs>; + }; + }; + + port@1 { + usbc_ss: endpoint { + remote-endpoint = + <&tcphy0_typec_ss>; + }; + }; + + port@2 { + usbc_dp: endpoint { + remote-endpoint = + <&tcphy0_typec_dp>; + }; + }; + }; + }; + }; +}; + +&i2s1 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>; + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&io_domains { + audio-supply = <&vcc_3v0>; + gpio1830-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + bus-scan-delay-ms = <1000>; + ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; + max-link-speed = <2>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + vpcie0v9-supply = <&vcca0v9_s3>; + vpcie1v8-supply = <&vcca1v8_s3>; + vpcie3v3-supply = <&vcc3v3_ssd>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwrbtn_gpio: pwrbtn-gpio { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + lidbtn_gpio: lidbtn-gpio { + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + dc-charger { + dc_det_gpio: dc-det-gpio { + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + es8316 { + hp_det_gpio: hp-det-gpio { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + fusb302x { + fusb0_int_gpio: fusb0-int-gpio { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + i2s1 { + i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio { + rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>; + }; + }; + + lcd-panel { + lcdvcc_en_gpio: lcdvcc-en-gpio { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + panel_en_gpio: panel-en-gpio { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + lcd_panel_reset_gpio: lcd-panel-reset-gpio { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + pwrled_gpio: pwrled_gpio { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + slpled_gpio: slpled_gpio { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l_gpio: pmic-int-l-gpio { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdcard { + sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio { + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + }; + + sdio-pwrseq { + wifi_enable_h_gpio: wifi-enable-h-gpio { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + pwr_5v_gpio: pwr-5v-gpio { + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_host_en_gpio: vcc5v0-host-en-gpio { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wireless-bluetooth { + bt_wake_gpio: bt-wake-gpio { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + bt_host_wake_gpio: bt-host-wake-gpio { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reset_gpio: bt-reset-gpio { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&spi1 { + max-freq = <10000000>; + status = "okay"; + + spiflash: flash@0 { + compatible = "jedec,spi-nor"; + m25p,fast-read; + reg = <0>; + spi-max-frequency = <10000000>; + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + loader@8000 { + label = "loader"; + reg = <0x0 0x3F8000>; + }; + + env@3f8000 { + label = "env"; + reg = <0x3F8000 0x8000>; + }; + + vendor@7c0000 { + label = "vendor"; + reg = <0x7C0000 0x40000>; + }; + }; + }; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy0_dp { + port { + tcphy0_typec_dp: endpoint { + remote-endpoint = <&usbc_dp>; + }; + }; +}; + +&tcphy0_usb3 { + port { + tcphy0_typec_ss: endpoint { + remote-endpoint = <&usbc_ss>; + }; + }; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_otg>; + status = "okay"; + }; + + port { + u2phy0_typec_hs: endpoint { + remote-endpoint = <&usbc_hs>; + }; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_otg>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk808 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + vbat-supply = <&wifi_bat>; + vddio-supply = <&vcc_wl>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; -- 2.24.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v3 2/2] arm64: dts: rockchip: Add initial support for Pinebook Pro 2020-02-29 14:48 ` [PATCH v3 2/2] arm64: dts: rockchip: Add initial support for " Tobias Schramm @ 2020-03-03 15:37 ` Johan Jonker 2020-03-03 16:11 ` Johan Jonker 2020-03-04 18:24 ` Tobias Schramm 0 siblings, 2 replies; 7+ messages in thread From: Johan Jonker @ 2020-03-03 15:37 UTC (permalink / raw) To: Tobias Schramm, Rob Herring, Mark Rutland, Heiko Stuebner, Andy Yan Cc: linux-arm-kernel, devicetree, Alexis Ballier, Katsuhiro Suzuki, linux-kernel, Douglas Anderson, Kever Yang, Markus Reichl, linux-rockchip, Matthias Kaehlcke, Jagan Teki, Nick Xie, Vivek Unune Hi Tobias, Some minor style issues. This dts file contains a partition node. Question for the maintainers (Heiko?): Should that partition be included or not? On 2/29/20 3:48 PM, Tobias Schramm wrote: > This commit adds initial dt support for the rk3399 based Pinebook Pro. > > Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> > --- > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 1105 +++++++++++++++++ > 2 files changed, 1106 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index 60d9437096c7..ae7621309e92 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts > new file mode 100644 > index 000000000000..dfade7e00051 > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts > @@ -0,0 +1,1105 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. > + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> > + * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org> > + */ > + > +/dts-v1/; > +#include <dt-bindings/input/gpio-keys.h> > +#include <dt-bindings/input/linux-event-codes.h> > +#include <dt-bindings/pwm/pwm.h> > +#include <dt-bindings/usb/pd.h> > +#include <dt-bindings/leds/common.h> > +#include "rk3399.dtsi" > +#include "rk3399-opp.dtsi" > + > +/ { > + model = "Pine64 Pinebook Pro"; > + compatible = "pine64,pinebook-pro", "rockchip,rk3399"; > + > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + backlight: edp-backlight { > + compatible = "pwm-backlight"; > + power-supply = <&vcc_12v>; > + pwms = <&pwm0 0 740740 0>; > + }; > + > + edp_panel: edp-panel { > + compatible = "boe,nv140fhmn49"; > + backlight = <&backlight>; > + enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&panel_en_gpio>; > + power-supply = <&vcc3v3_panel>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + panel_in_edp: endpoint@0 { > + remote-endpoint = <&edp_out_panel>; > + }; > + }; > + }; > + }; > + > + /* > + * Use separate nodes for gpio-keys to allow for selective deactivation > + * of wakeup sources via sysfs without disabling the whole key > + */ > + gpio-key-lid { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&lidbtn_gpio>; > + > + lid { > + debounce-interval = <20>; > + gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>; > + label = "Lid"; > + linux,code = <SW_LID>; > + linux,input-type = <EV_SW>; > + wakeup-event-action = <EV_ACT_DEASSERTED>; > + wakeup-source; > + }; > + }; > + > + gpio-key-power { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pwrbtn_gpio>; > + > + power { > + debounce-interval = <20>; > + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; > + label = "Power"; > + linux,code = <KEY_POWER>; > + wakeup-source; > + }; > + }; > + > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pwrled_gpio &slpled_gpio>; > + > + green-led { > + color = <LED_COLOR_ID_GREEN>; > + default-state = "on"; > + function = LED_FUNCTION_POWER; > + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; > + label = "green:power"; > + }; > + > + red-led { > + color = <LED_COLOR_ID_RED>; > + default-state = "off"; > + function = LED_FUNCTION_STANDBY; > + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; > + label = "red:standby"; > + panic-indicator; > + retain-state-suspended; > + }; > + }; > + > + /* Power sequence for SDIO WiFi module */ > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + clocks = <&rk808 1>; > + clock-names = "ext_clock"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_enable_h_gpio>; > + post-power-on-delay-ms = <100>; > + power-off-delay-us = <500000>; > + > + /* WL_REG_ON on module */ > + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; > + }; > + > + /* Audio components */ > + es8316-sound { > + compatible = "simple-audio-card"; > + pinctrl-names = "default"; > + pinctrl-0 = <&hp_det_gpio>; > + simple-audio-card,name = "rockchip,es8316-codec"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,mclk-fs = <256>; > + > + simple-audio-card,widgets = > + "Microphone", "Mic Jack", > + "Headphone", "Headphones", > + "Speaker", "Speaker"; > + simple-audio-card,routing = > + "MIC1", "Mic Jack", > + "Headphones", "HPOL", > + "Headphones", "HPOR", > + "Speaker Amplifier INL", "HPOL", > + "Speaker Amplifier INR", "HPOR", > + "Speaker", "Speaker Amplifier OUTL", > + "Speaker", "Speaker Amplifier OUTR"; > + > + simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>; > + simple-audio-card,aux-devs = <&speaker_amp>; > + simple-audio-card,pin-switches = "Speaker"; > + > + simple-audio-card,cpu { > + sound-dai = <&i2s1>; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&es8316>; > + }; > + }; > + > + speaker_amp: speaker-amplifier { > + compatible = "simple-audio-amplifier"; > + enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; > + sound-name-prefix = "Speaker Amplifier"; > + VCC-supply = <&pa_5v>; > + }; > + > + /* Power tree */ > + /* Root power source */ > + vcc_sysin: vcc-sysin { > + compatible = "regulator-fixed"; > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc_sysin"; > + }; > + > + /* Regulators supplied by vcc_sysin */ > + /* LCD backlight supply */ > + vcc_12v: vcc-12v { > + compatible = "regulator-fixed"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + regulator-name = "vcc_12v"; > + vin-supply = <&vcc_sysin>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + /* Main 3.3 V supply */ > + vcc3v3_sys: wifi_bat: vcc3v3-sys { > + compatible = "regulator-fixed"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc3v3_sys"; > + vin-supply = <&vcc_sysin>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + /* 5 V USB power supply */ > + vcc5v0_usb: pa_5v: vcc5v0-usb-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pwr_5v_gpio>; > + regulator-always-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-name = "vcc5v0_usb"; > + vin-supply = <&vcc_sysin>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + /* RK3399 logic supply */ > + vdd_log: vdd-log { > + compatible = "pwm-regulator"; > + pwms = <&pwm2 0 25000 1>; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1400000>; > + regulator-name = "vdd_log"; > + vin-supply = <&vcc_sysin>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + /* Regulators supplied by vcc3v3_sys */ > + /* 0.9 V supply, always on */ > + vcc_0v9: vcc-0v9 { > + compatible = "regulator-fixed"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-name = "vcc_0v9"; > + vin-supply = <&vcc3v3_sys>; > + }; > + > + /* S3 1.8 V supply, switched by vcc1v8_s3 */ > + vcca1v8_s3: vcc1v8-s3 { > + compatible = "regulator-fixed"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcca1v8_s3"; > + vin-supply = <&vcc3v3_sys>; > + }; > + > + /* micro SD card power */ > + vcc3v0_sd: vcc3v0-sd { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc0_pwr_h_gpio>; > + regulator-always-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-name = "vcc3v0_sd"; > + vin-supply = <&vcc3v3_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + /* LCD panel power, called VCC3V3_S0 in schematic */ > + vcc3v3_panel: vcc3v3-panel { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&lcdvcc_en_gpio>; > + regulator-always-on; > + regulator-enable-ramp-delay = <100000>; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc3v3_panel"; > + vin-supply = <&vcc3v3_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + /* M.2 adapter power, switched by vcc1v8_s3 */ > + vcc3v3_ssd: vcc3v3-ssd { > + compatible = "regulator-fixed"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc3v3_ssd"; > + vin-supply = <&vcc3v3_sys>; > + }; > + > + /* Regulators supplied by vcc5v0_usb */ > + /* USB 3 port power supply regulator */ > + vcc5v0_otg: vcc5v0-otg { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_host_en_gpio>; > + regulator-always-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-name = "vcc5v0_otg"; > + vin-supply = <&vcc5v0_usb>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + /* Regulators supplied by vcc5v0_usb */ > + /* Type C port power supply regulator */ > + vbus_5vout: vbus_typec: vbus-5vout { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_typec0_en_gpio>; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-name = "vbus_5vout"; > + vin-supply = <&vcc5v0_usb>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + /* Regulators supplied by vcc_1v8 */ > + /* Primary 0.9 V LDO */ > + vcca0v9_s3: vcca0v9-s3 { > + compatible = "regulator-fixed"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-name = "vcc0v9_s3"; > + vin-supply = <&vcc_1v8>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + mains_charger: dc-charger { > + compatible = "gpio-charger"; > + charger-type = "mains"; > + gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>; > + > + /* Also triggered by USB charger */ > + pinctrl-names = "default"; > + pinctrl-0 = <&dc_det_gpio>; > + }; > +}; > + > +&cdn_dp { > + status = "okay"; > +}; > + > +&cpu_l0 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l1 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l2 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l3 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_b0 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&cpu_b1 { > + cpu-supply = <&vdd_cpu_b>; > +}; sort and move above &cpu_l0 > + > +&edp { > + force-hpd; > + pinctrl-names = "default"; > + pinctrl-0 = <&edp_hpd>; > + status = "okay"; > + > + ports { > + edp_out: port@1 { > + reg = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + edp_out_panel: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&panel_in_edp>; > + }; > + }; > + }; > +}; > + > +&emmc_phy { > + status = "okay"; > +}; > + > +&gpu { > + mali-supply = <&vdd_gpu>; > + status = "okay"; > +}; > + > +&hdmi_sound { > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + i2c-scl-rising-time-ns = <168>; > + i2c-scl-falling-time-ns = <4>; sort this as well > + status = "okay"; > + > + rk808: pmic@1b { > + compatible = "rockchip,rk808"; > + reg = <0x1b>; > + #clock-cells = <1>; > + clock-output-names = "xin32k", "rk808-clkout2"; > + interrupt-parent = <&gpio3>; > + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l_gpio>; > + rockchip,system-power-controller; > + wakeup-source; > + > + vcc1-supply = <&vcc_sysin>; > + vcc2-supply = <&vcc_sysin>; > + vcc3-supply = <&vcc_sysin>; > + vcc4-supply = <&vcc_sysin>; > + vcc6-supply = <&vcc_sysin>; > + vcc7-supply = <&vcc_sysin>; > + vcc8-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc_sysin>; > + vcc10-supply = <&vcc_sysin>; > + vcc11-supply = <&vcc_sysin>; > + vcc12-supply = <&vcc3v3_sys>; > + vcc13-supply = <&vcc_sysin>; > + vcc14-supply = <&vcc_sysin>; > + > + regulators { > + /* rk3399 center logic supply */ > + vdd_center: DCDC_REG1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-name = "vdd_center"; > + regulator-ramp-delay = <6001>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_l: DCDC_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-name = "vdd_cpu_l"; > + regulator-ramp-delay = <6001>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc_ddr"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_1v8: vcc_wl: DCDC_REG4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc_1v8"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + /* not used */ > + LDO_REG1 { > + }; > + > + /* not used */ > + LDO_REG2 { > + }; > + > + vcc1v8_pmupll: LDO_REG3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc1v8_pmupll"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc_sdio: LDO_REG4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3000000>; > + regulator-name = "vcc_sdio"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcca3v0_codec: LDO_REG5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-name = "vcca3v0_codec"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v5: LDO_REG6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-name = "vcc_1v5"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1500000>; > + }; > + }; > + > + vcca1v8_codec: LDO_REG7 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcca1v8_codec"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v0: LDO_REG8 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-name = "vcc_3v0"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcc3v3_s3: SWITCH_REG1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc3v3_s3"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_s0: SWITCH_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc3v3_s0"; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > + > + vdd_cpu_b: regulator@40 { > + compatible = "silergy,syr827"; > + reg = <0x40>; > + fcs,suspend-voltage-selector = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vsel1_gpio>; > + regulator-always-on; > + regulator-boot-on; > + regulator-compatible = "fan53555-reg"; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-name = "vdd_cpu_b"; > + regulator-ramp-delay = <1000>; > + vin-supply = <&vcc_1v8>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_gpu: regulator@41 { > + compatible = "silergy,syr828"; > + reg = <0x41>; > + fcs,suspend-voltage-selector = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vsel2_gpio>; > + regulator-always-on; > + regulator-boot-on; > + regulator-compatible = "fan53555-reg"; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-name = "vdd_gpu"; > + regulator-ramp-delay = <1000>; > + vin-supply = <&vcc_1v8>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + i2c-scl-falling-time-ns = <4>; > + i2c-scl-rising-time-ns = <168>; > + status = "okay"; > + > + es8316: es8316@11 { > + compatible = "everest,es8316"; > + reg = <0x11>; > + clocks = <&cru SCLK_I2S_8CH_OUT>; > + clock-names = "mclk"; > + #sound-dai-cells = <0>; > + }; > +}; > + > +&i2c3 { > + i2c-scl-falling-time-ns = <15>; > + i2c-scl-rising-time-ns = <450>; > + status = "okay"; > +}; > + > +&i2c4 { > + i2c-scl-falling-time-ns = <20>; > + i2c-scl-rising-time-ns = <600>; > + status = "okay"; > + > + fusb0: fusb30x@22 { > + compatible = "fcs,fusb302"; > + reg = <0x22>; > + fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&fusb0_int_gpio>; > + status = "okay"; Remove or else status below. New nodes are already okay I think. If insure check compiled flat dts output to see if it is still there. > + vbus-supply = <&vbus_typec>; > + > + connector { > + compatible = "usb-c-connector"; > + label = "USB-C"; > + op-sink-microwatt = <1000000>; > + power-role = "dual"; > + sink-pdos = > + <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>; > + source-pdos = > + <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>; > + try-power-role = "sink"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + usbc_hs: endpoint { > + remote-endpoint = > + <&u2phy0_typec_hs>; > + }; > + }; > + > + port@1 { > + usbc_ss: endpoint { > + remote-endpoint = > + <&tcphy0_typec_ss>; > + }; > + }; > + > + port@2 { > + usbc_dp: endpoint { > + remote-endpoint = > + <&tcphy0_typec_dp>; > + }; > + }; > + }; > + }; > + }; > +}; > + > +&i2s1 { > + #sound-dai-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>; > + rockchip,playback-channels = <8>; > + rockchip,capture-channels = <8>; sort > + status = "okay"; > +}; > + > +&io_domains { > + audio-supply = <&vcc_3v0>; > + gpio1830-supply = <&vcc_3v0>; > + sdmmc-supply = <&vcc_sdio>; > + status = "okay"; > +}; > + > +&pcie_phy { > + status = "okay"; > +}; > + > +&pcie0 { > + bus-scan-delay-ms = <1000>; > + ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; > + max-link-speed = <2>; > + num-lanes = <4>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_clkreqn_cpm>; > + vpcie0v9-supply = <&vcca0v9_s3>; > + vpcie1v8-supply = <&vcca1v8_s3>; > + vpcie3v3-supply = <&vcc3v3_ssd>; > + status = "okay"; > +}; > + > +&pinctrl { > + buttons { > + pwrbtn_gpio: pwrbtn-gpio { > + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; > + }; Add extra empty line here. > + lidbtn_gpio: lidbtn-gpio { > + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + dc-charger { > + dc_det_gpio: dc-det-gpio { > + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + es8316 { > + hp_det_gpio: hp-det-gpio { > + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + }; > + > + fusb302x { > + fusb0_int_gpio: fusb0-int-gpio { > + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + i2s1 { > + i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio { > + rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>; > + }; > + }; > + > + lcd-panel { > + lcdvcc_en_gpio: lcdvcc-en-gpio { > + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + panel_en_gpio: panel-en-gpio { > + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + lcd_panel_reset_gpio: lcd-panel-reset-gpio { > + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + leds { > + pwrled_gpio: pwrled_gpio { > + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + slpled_gpio: slpled_gpio { > + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pmic { > + pmic_int_l_gpio: pmic-int-l-gpio { > + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + > + vsel1_gpio: vsel1-gpio { > + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + vsel2_gpio: vsel2-gpio { > + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + }; > + > + sdcard { > + sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio { > + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + }; > + > + sdio-pwrseq { > + wifi_enable_h_gpio: wifi-enable-h-gpio { > + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + usb-typec { > + vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio { > + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + usb2 { > + pwr_5v_gpio: pwr-5v-gpio { > + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + vcc5v0_host_en_gpio: vcc5v0-host-en-gpio { > + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + wireless-bluetooth { > + bt_wake_gpio: bt-wake-gpio { > + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; Add extra empty line here. > + bt_host_wake_gpio: bt-host-wake-gpio { > + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + bt_reset_gpio: bt-reset-gpio { > + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&pmu_io_domains { > + pmu1830-supply = <&vcc_3v0>; > + status = "okay"; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&pwm2 { > + status = "okay"; > +}; > + > +&saradc { > + vref-supply = <&vcca1v8_s3>; > + status = "okay"; > +}; > + > +&sdmmc { > + bus-width = <4>; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; > + disable-wp; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; > + sd-uhs-sdr104; > + status = "okay"; > +}; > + > +&sdio0 { > + bus-width = <4>; > + cap-sd-highspeed; > + cap-sdio-irq; > + keep-power-in-suspend; > + mmc-pwrseq = <&sdio_pwrseq>; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; > + sd-uhs-sdr104; > + status = "okay"; > +}; > + > +&sdhci { > + bus-width = <8>; > + mmc-hs200-1_8v; > + non-removable; > + status = "okay"; > +}; > + > +&spi1 { > + max-freq = <10000000>; > + status = "okay"; > + > + spiflash: flash@0 { > + compatible = "jedec,spi-nor"; > + m25p,fast-read; > + reg = <0>; Change this to: compatible = "jedec,spi-nor"; reg = <0>; m25p,fast-read; > + spi-max-frequency = <10000000>; > + status = "okay"; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + loader@8000 { > + label = "loader"; > + reg = <0x0 0x3F8000>; > + }; > + > + env@3f8000 { > + label = "env"; > + reg = <0x3F8000 0x8000>; > + }; > + > + vendor@7c0000 { > + label = "vendor"; > + reg = <0x7C0000 0x40000>; > + }; > + }; Partitions are normaly up to the user and should not be included to dts files, else could you explain why we need this exception? > + }; > +}; > + > +&tcphy0 { > + status = "okay"; > +}; > + > +&tcphy0_dp { > + port { > + tcphy0_typec_dp: endpoint { > + remote-endpoint = <&usbc_dp>; > + }; > + }; > +}; > + > +&tcphy0_usb3 { > + port { > + tcphy0_typec_ss: endpoint { > + remote-endpoint = <&usbc_ss>; > + }; > + }; > +}; > + > +&tcphy1 { > + status = "okay"; > +}; > + > +&tsadc { > + /* tshut mode 0:CRU 1:GPIO */ > + rockchip,hw-tshut-mode = <1>; > + /* tshut polarity 0:LOW 1:HIGH */ > + rockchip,hw-tshut-polarity = <1>; > + status = "okay"; > +}; > + > +&u2phy0 { > + status = "okay"; > + > + u2phy0_otg: otg-port { > + status = "okay"; > + }; > + > + u2phy0_host: host-port { > + phy-supply = <&vcc5v0_otg>; > + status = "okay"; > + }; > + > + port { > + u2phy0_typec_hs: endpoint { > + remote-endpoint = <&usbc_hs>; > + }; > + }; > +}; > + > +&u2phy1 { > + status = "okay"; > + > + u2phy1_otg: otg-port { > + status = "okay"; > + }; > + > + u2phy1_host: host-port { > + phy-supply = <&vcc5v0_otg>; > + status = "okay"; > + }; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; > + uart-has-rtscts; > + status = "okay"; > + > + bluetooth { > + compatible = "brcm,bcm4345c5"; > + clocks = <&rk808 1>; > + clock-names = "lpo"; > + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; > + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; > + max-speed = <1500000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>; > + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; > + vbat-supply = <&wifi_bat>; > + vddio-supply = <&vcc_wl>; > + }; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&usb_host0_ehci { > + status = "okay"; > +}; > + > +&usb_host0_ohci { > + status = "okay"; > +}; > + > +&usb_host1_ehci { > + status = "okay"; > +}; > + > +&usb_host1_ohci { > + status = "okay"; > +}; > + > +&usbdrd3_0 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_0 { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +&usbdrd3_1 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_1 { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +&vopb { > + status = "okay"; > +}; > + > +&vopb_mmu { > + status = "okay"; > +}; > + > +&vopl { > + status = "okay"; > +}; > + > +&vopl_mmu { > + status = "okay"; > +}; > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3 2/2] arm64: dts: rockchip: Add initial support for Pinebook Pro 2020-03-03 15:37 ` Johan Jonker @ 2020-03-03 16:11 ` Johan Jonker 2020-03-04 18:24 ` Tobias Schramm 1 sibling, 0 replies; 7+ messages in thread From: Johan Jonker @ 2020-03-03 16:11 UTC (permalink / raw) To: Tobias Schramm, Rob Herring, Mark Rutland, Heiko Stuebner, Andy Yan Cc: linux-arm-kernel, devicetree, Alexis Ballier, Katsuhiro Suzuki, linux-kernel, Douglas Anderson, Kever Yang, Markus Reichl, linux-rockchip, Matthias Kaehlcke, Jagan Teki, Nick Xie, Vivek Unune Hi, Add more reg = <..> On 3/3/20 4:37 PM, Johan Jonker wrote: > Hi Tobias, > > Some minor style issues. > This dts file contains a partition node. > Question for the maintainers (Heiko?): > Should that partition be included or not? [..] >> +&i2c4 { >> + i2c-scl-falling-time-ns = <20>; >> + i2c-scl-rising-time-ns = <600>; >> + status = "okay"; >> + >> + fusb0: fusb30x@22 { >> + compatible = "fcs,fusb302"; >> + reg = <0x22>; >> + fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&fusb0_int_gpio>; > >> + status = "okay"; > > Remove or else status below. > New nodes are already okay I think. > If insure check compiled flat dts output to see if it is still there. > >> + vbus-supply = <&vbus_typec>; >> + >> + connector { >> + compatible = "usb-c-connector"; >> + label = "USB-C"; >> + op-sink-microwatt = <1000000>; >> + power-role = "dual"; >> + sink-pdos = >> + <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>; >> + source-pdos = >> + <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>; >> + try-power-role = "sink"; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { reg = <0>; >> + usbc_hs: endpoint { >> + remote-endpoint = >> + <&u2phy0_typec_hs>; >> + }; >> + }; >> + >> + port@1 { reg = <1>; >> + usbc_ss: endpoint { >> + remote-endpoint = >> + <&tcphy0_typec_ss>; >> + }; >> + }; >> + >> + port@2 { reg = <2>; >> + usbc_dp: endpoint { >> + remote-endpoint = >> + <&tcphy0_typec_dp>; >> + }; >> + }; >> + }; >> + }; >> + }; >> +}; _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3 2/2] arm64: dts: rockchip: Add initial support for Pinebook Pro 2020-03-03 15:37 ` Johan Jonker 2020-03-03 16:11 ` Johan Jonker @ 2020-03-04 18:24 ` Tobias Schramm 1 sibling, 0 replies; 7+ messages in thread From: Tobias Schramm @ 2020-03-04 18:24 UTC (permalink / raw) To: Johan Jonker, Tobias Schramm, Rob Herring, Mark Rutland, Heiko Stuebner, Andy Yan Cc: linux-arm-kernel, devicetree, Alexis Ballier, Katsuhiro Suzuki, linux-kernel, Douglas Anderson, Kever Yang, Markus Reichl, linux-rockchip, Matthias Kaehlcke, Jagan Teki, Nick Xie, Vivek Unune Hi Johan, thanks for the additional feedback. I'll send a v4 with your fixes included. >> + partitions { >> + compatible = "fixed-partitions"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + loader@8000 { >> + label = "loader"; >> + reg = <0x0 0x3F8000>; >> + }; >> + >> + env@3f8000 { >> + label = "env"; >> + reg = <0x3F8000 0x8000>; >> + }; >> + >> + vendor@7c0000 { >> + label = "vendor"; >> + reg = <0x7C0000 0x40000>; >> + }; >> + }; > > Partitions are normaly up to the user and should not be included to dts > files, > else could you explain why we need this exception? > Right. I don't see any reason why we would need to keep it either. I'll remove it. Tobias _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-03-04 18:24 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-02-29 14:48 [PATCH v3 0/2] Add support for the pine64 Pinebook Pro Tobias Schramm 2020-02-29 14:48 ` [PATCH v3 1/2] dt-bindings: Add doc for " Tobias Schramm 2020-03-01 0:42 ` Heiko Stuebner 2020-02-29 14:48 ` [PATCH v3 2/2] arm64: dts: rockchip: Add initial support for " Tobias Schramm 2020-03-03 15:37 ` Johan Jonker 2020-03-03 16:11 ` Johan Jonker 2020-03-04 18:24 ` Tobias Schramm
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).