[PATCH] [media] atmel-isc: Set the default DMA memory burst size

[nicolas.ferre@microchip.com (Nicolas Ferre)]

Le 20/04/2017 ? 10:51, Songjun Wu a ?crit :
> Sometimes 'DMA single access' is not enough to transfer
> a frame of image, '8-beat burst access' is set as the
> default DMA memory burst size.
> 
> Signed-off-by: Songjun Wu <songjun.wu@microchip.com>

Seems okay:
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>


> ---
> 
>  drivers/media/platform/atmel/atmel-isc.c | 23 ++++++++++++-----------
>  1 file changed, 12 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
> index c4b2115559a5..78d966233f80 100644
> --- a/drivers/media/platform/atmel/atmel-isc.c
> +++ b/drivers/media/platform/atmel/atmel-isc.c
> @@ -239,13 +239,11 @@ static struct isc_format isc_formats[] = {
>  
>  	{ V4L2_PIX_FMT_YUV420, 0x0, 12,
>  	  ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_YYCC,
> -	  ISC_DCFG_IMODE_YC420P | ISC_DCFG_YMBSIZE_BEATS8 |
> -	  ISC_DCFG_CMBSIZE_BEATS8, ISC_DCTRL_DVIEW_PLANAR, 0x7fb,
> +	  ISC_DCFG_IMODE_YC420P, ISC_DCTRL_DVIEW_PLANAR, 0x7fb,
>  	  false, false },
>  	{ V4L2_PIX_FMT_YUV422P, 0x0, 16,
>  	  ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_YYCC,
> -	  ISC_DCFG_IMODE_YC422P | ISC_DCFG_YMBSIZE_BEATS8 |
> -	  ISC_DCFG_CMBSIZE_BEATS8, ISC_DCTRL_DVIEW_PLANAR, 0x3fb,
> +	  ISC_DCFG_IMODE_YC422P, ISC_DCTRL_DVIEW_PLANAR, 0x3fb,
>  	  false, false },
>  	{ V4L2_PIX_FMT_RGB565, MEDIA_BUS_FMT_RGB565_2X8_LE, 16,
>  	  ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_RGB565,
> @@ -700,8 +698,10 @@ static void isc_set_histogram(struct isc_device *isc)
>  }
>  
>  static inline void isc_get_param(const struct isc_format *fmt,
> -				     u32 *rlp_mode, u32 *dcfg_imode)
> +				  u32 *rlp_mode, u32 *dcfg)
>  {
> +	*dcfg = ISC_DCFG_YMBSIZE_BEATS8;
> +
>  	switch (fmt->fourcc) {
>  	case V4L2_PIX_FMT_SBGGR10:
>  	case V4L2_PIX_FMT_SGBRG10:
> @@ -712,11 +712,11 @@ static inline void isc_get_param(const struct isc_format *fmt,
>  	case V4L2_PIX_FMT_SGRBG12:
>  	case V4L2_PIX_FMT_SRGGB12:
>  		*rlp_mode = fmt->reg_rlp_mode;
> -		*dcfg_imode = fmt->reg_dcfg_imode;
> +		*dcfg |= fmt->reg_dcfg_imode;
>  		break;
>  	default:
>  		*rlp_mode = ISC_RLP_CFG_MODE_DAT8;
> -		*dcfg_imode = ISC_DCFG_IMODE_PACKED8;
> +		*dcfg |= ISC_DCFG_IMODE_PACKED8;
>  		break;
>  	}
>  }
> @@ -726,18 +726,19 @@ static int isc_configure(struct isc_device *isc)
>  	struct regmap *regmap = isc->regmap;
>  	const struct isc_format *current_fmt = isc->current_fmt;
>  	struct isc_subdev_entity *subdev = isc->current_subdev;
> -	u32 pfe_cfg0, rlp_mode, dcfg_imode, mask, pipeline;
> +	u32 pfe_cfg0, rlp_mode, dcfg, mask, pipeline;
>  
>  	if (sensor_is_preferred(current_fmt)) {
>  		pfe_cfg0 = current_fmt->reg_bps;
>  		pipeline = 0x0;
> -		isc_get_param(current_fmt, &rlp_mode, &dcfg_imode);
> +		isc_get_param(current_fmt, &rlp_mode, &dcfg);
>  		isc->ctrls.hist_stat = HIST_INIT;
>  	} else {
>  		pfe_cfg0  = isc->raw_fmt->reg_bps;
>  		pipeline = current_fmt->pipeline;
>  		rlp_mode = current_fmt->reg_rlp_mode;
> -		dcfg_imode = current_fmt->reg_dcfg_imode;
> +		dcfg = current_fmt->reg_dcfg_imode | ISC_DCFG_YMBSIZE_BEATS8 |
> +		       ISC_DCFG_CMBSIZE_BEATS8;
>  	}
>  
>  	pfe_cfg0  |= subdev->pfe_cfg0 | ISC_PFE_CFG0_MODE_PROGRESSIVE;
> @@ -750,7 +751,7 @@ static int isc_configure(struct isc_device *isc)
>  	regmap_update_bits(regmap, ISC_RLP_CFG, ISC_RLP_CFG_MODE_MASK,
>  			   rlp_mode);
>  
> -	regmap_update_bits(regmap, ISC_DCFG, ISC_DCFG_IMODE_MASK, dcfg_imode);
> +	regmap_write(regmap, ISC_DCFG, dcfg);
>  
>  	/* Set the pipeline */
>  	isc_set_pipeline(isc, pipeline);
> 


-- 
Nicolas Ferre