linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Robin Murphy <robin.murphy@arm.com>
To: will@kernel.org, mark.rutland@arm.com
Cc: lorenzo.pieralisi@arm.com, sudeep.holla@arm.com,
	linux-arm-kernel@lists.infradead.org, jean-philippe@linaro.org,
	leo.yan@linaro.org, noda.akio@socionext.com
Subject: [PATCH 3/6] iommu/arm-smmu: Add DT PMU support
Date: Thu, 17 Feb 2022 14:24:17 +0000	[thread overview]
Message-ID: <c14404f91371dd2b2f194ea92cb092602bcb393e.1645106346.git.robin.murphy@arm.com> (raw)
In-Reply-To: <cover.1645106346.git.robin.murphy@arm.com>

Since IORT describes PMU interrupts rather inflexibly as an inherent
part of the SMMU, the best way to avoid excessive complexity is to make
the way we handle DT look as similar as possible. Fortunately the
de-facto standard for mentioning PMU interrupts at all under the current
binding has been to include them in the global interrupt count, listing
them after the actual fault interrupt(s), so we can capitalise on that.
It's about 9 years too late to redefine "#global-interrupts" to exclude
anything other than context interrupts without breaking compatibility,
so we're stuck with a slightly convoluted definition of PMU interrupts
as an optional subdivision of the "global" interrupts, but it works.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>

---

Not sure whether the count-backwards-from-the-middle nature of "number
of PMU interrupts" is too ugly and "index of first PMU interrupt" might
be any better.
---
 .../devicetree/bindings/iommu/arm,smmu.yaml   | 19 ++++++++++++++++++-
 drivers/iommu/arm/arm-smmu/arm-smmu.c         |  4 ++++
 2 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index da5381c8ee11..9d39df42528a 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -87,10 +87,18 @@ properties:
 
   '#global-interrupts':
     description: The number of global interrupts exposed by the device.
+      Includes the count of PMU interrupts, if present.
     $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 260   # 2 secure, 2 non-secure, and up to 256 perf counters
 
+  '#pmu-interrupts':
+    description: The number of PMU interrupts. Must be equal to the number of
+      implemented counter groups.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 256
+
   '#iommu-cells':
     enum: [ 1, 2 ]
     description: |
@@ -115,6 +123,10 @@ properties:
       context bank. In the case of a single, combined interrupt, it must be
       listed multiple times.
 
+      If a PMU is present, the global interrupt entries consist of any fault
+      interrupts first, followed by #pmu-interrupts entries, one per implemented
+      counter group, specified in order of their indexing by the SMMU.
+
   dma-coherent:
     description: |
       Present if page table walks made by the SMMU are cache coherent with the
@@ -190,9 +202,14 @@ examples:
     smmu1: iommu@ba5e0000 {
             compatible = "arm,smmu-v1";
             reg = <0xba5e0000 0x10000>;
-            #global-interrupts = <2>;
+            #global-interrupts = <6>; /* 2 fault + 4 PMU */
+            #pmu-interrupts = <4>;
             interrupts = <0 32 4>,
                          <0 33 4>,
+                         <0 94 4>, /* This is the first PMU interrupt */
+                         <0 95 4>,
+                         <0 96 4>,
+                         <0 97 4>,
                          <0 34 4>, /* This is the first context interrupt */
                          <0 35 4>,
                          <0 36 4>,
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c
index cbfe4cc914f0..8d6c8106fc1d 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c
@@ -1995,6 +1995,10 @@ static int arm_smmu_device_dt_probe(struct arm_smmu_device *smmu,
 		return dev_err_probe(dev, -ENODEV,
 				     "missing #global-interrupts property\n");
 	*pmu_irqs = 0;
+	of_property_read_u32(dev->of_node, "#pmu-interrupts", pmu_irqs);
+	if (*pmu_irqs > *global_irqs)
+		return dev_err_probe(dev, -EINVAL, "invalid #pmu_interrupts property");
+	*global_irqs -= *pmu_irqs;
 
 	data = of_device_get_match_data(dev);
 	smmu->version = data->version;
-- 
2.28.0.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-02-17 14:34 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-17 14:24 [PATCH 0/6] perf: Arm SMMU PMU driver Robin Murphy
2022-02-17 14:24 ` [PATCH 1/6] iommu/arm-smmu: Account for PMU interrupts Robin Murphy
2022-02-17 14:24 ` [PATCH 2/6] acpi/iort: Register SMMUv2 " Robin Murphy
2022-02-17 14:24 ` Robin Murphy [this message]
2022-03-02 15:33   ` [PATCH 3/6] iommu/arm-smmu: Add DT PMU support Rob Herring
2022-03-02 17:03     ` Robin Murphy
2022-02-17 14:24 ` [PATCH 4/6] iommu/smmu: Create child devices for PMUs Robin Murphy
2022-02-17 14:24 ` [PATCH 5/6] perf: Add ARM SMMU PMU driver Robin Murphy
2022-02-17 14:24 ` [PATCH 6/6] arm64: dts: Add SMMU PMUs to Juno Robin Murphy
2022-03-07 22:03 ` [PATCH 0/6] perf: Arm SMMU PMU driver Will Deacon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c14404f91371dd2b2f194ea92cb092602bcb393e.1645106346.git.robin.murphy@arm.com \
    --to=robin.murphy@arm.com \
    --cc=jean-philippe@linaro.org \
    --cc=leo.yan@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=noda.akio@socionext.com \
    --cc=sudeep.holla@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).