[PATCH v2] arm: multi_v7_defconfig: Enable more OMAP related configs

[PATCH v2] arm: multi_v7_defconfig: Enable more OMAP related configs

[Beleswar Padhi]

From: Sinthu Raja <sinthu.raja@ti.com>

This allows us to enable various peripherals in the TI OMAP family
platforms like AM571X-IDK, AM572X-IDK, AM574X-IDK, AM57XX-BEAGLE-X15,
AM57XX-EVM using the multi_v7_defconfig, instead of only with the
OMAP specific defconfigs.

IWLWIFI:
Intel Wireless Next-Gen WiFi adapters for AM57XX platforms.

SND_SOC_OMAP_HDMI:
Enable HDMI audio to work with OMAPDSS HDMI for AM57XX platforms.

RTC_DRV_OMAP:
Enable Real Time Clock support, needed by AMX3_PM config for Power
Management.

WKUP_M3_{RPROC/IPC}:
Enable Remoteproc/IPC support on AM335X platform. Needed by AMX3_PM
config.

TI_EMIF_SRAM:
Enable EMIF module needed by AMX3_PM config for Power Management.

AMX3_PM:
Enable Power Management for AM335X platform.

EXTCON_PALMAS:
Enable support for USB peripheral detection by external connector palmas
USB on AM57XX platforms.

CRYPTO_XCBC:
Enable XCBC-MAC (Extended Cipher Block Chaining MAC) mode
to provide authentication mechanisms for IPsec Encapsulating
Security Payload (ESP) and the Authentication Header (AH)
protocols.

CRYPTO_DEV_OMAP*:
Add support to enable the OMAP AES, DES, SHAM hardware engine for AM57XX
platforms.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
---
v2: Changelog:
Krzysztof:
1. Updated commit message to call out which (and why) upstream boards
need these configs to be enabled.
2. Used savedefconfig to correct the order of configs in the defconfig.

Link to v1:
https://lore.kernel.org/all/20250611074925.1155547-1-b-padhi@ti.com/

 arch/arm/configs/multi_v7_defconfig | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index c79495e113c8..fe1c4d7801ef 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -310,6 +310,7 @@ CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
 CONFIG_WCN36XX=m
 CONFIG_BRCMFMAC=m
+CONFIG_IWLWIFI=m
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_SDIO=m
 CONFIG_RT2X00=m
@@ -838,6 +839,7 @@ CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
 CONFIG_SND_SOC_TEGRA_ALC5632=m
 CONFIG_SND_SOC_TEGRA_MAX98090=m
 CONFIG_SND_SOC_DAVINCI_MCASP=m
+CONFIG_SND_SOC_OMAP_HDMI=m
 CONFIG_SND_SOC_AC97_CODEC=m
 CONFIG_SND_SOC_AK4642=m
 CONFIG_SND_SOC_CPCAP=m
@@ -1010,6 +1012,7 @@ CONFIG_RTC_DRV_S5M=m
 CONFIG_RTC_DRV_DA9063=m
 CONFIG_RTC_DRV_EFI=m
 CONFIG_RTC_DRV_DIGICOLOR=m
+CONFIG_RTC_DRV_OMAP=m
 CONFIG_RTC_DRV_S3C=m
 CONFIG_RTC_DRV_SA1100=m
 CONFIG_RTC_DRV_SH=m
@@ -1097,6 +1100,7 @@ CONFIG_QCOM_IOMMU=y
 CONFIG_REMOTEPROC=y
 CONFIG_OMAP_REMOTEPROC=m
 CONFIG_OMAP_REMOTEPROC_WATCHDOG=y
+CONFIG_WKUP_M3_RPROC=m
 CONFIG_KEYSTONE_REMOTEPROC=m
 CONFIG_QCOM_Q6V5_MSS=m
 CONFIG_QCOM_SYSMON=m
@@ -1129,6 +1133,8 @@ CONFIG_ARCH_TEGRA_124_SOC=y
 CONFIG_SOC_TI=y
 CONFIG_KEYSTONE_NAVIGATOR_QMSS=y
 CONFIG_KEYSTONE_NAVIGATOR_DMA=y
+CONFIG_AMX3_PM=m
+CONFIG_WKUP_M3_IPC=m
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_QCOM_CPR=y
 CONFIG_QCOM_RPMHPD=y
@@ -1141,8 +1147,10 @@ CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m
 CONFIG_EXTCON_MAX14577=m
 CONFIG_EXTCON_MAX77693=m
 CONFIG_EXTCON_MAX8997=m
+CONFIG_EXTCON_PALMAS=m
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_TI_AEMIF=y
+CONFIG_TI_EMIF_SRAM=m
 CONFIG_STM32_FMC2_EBI=y
 CONFIG_EXYNOS5422_DMC=m
 CONFIG_IIO=y
@@ -1275,6 +1283,7 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
@@ -1289,6 +1298,10 @@ CONFIG_CRYPTO_AES_ARM_CE=m
 CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRYPTO_DEV_SUN4I_SS=m
 CONFIG_CRYPTO_DEV_FSL_CAAM=m
+CONFIG_CRYPTO_DEV_OMAP=m
+CONFIG_CRYPTO_DEV_OMAP_SHAM=m
+CONFIG_CRYPTO_DEV_OMAP_AES=m
+CONFIG_CRYPTO_DEV_OMAP_DES=m
 CONFIG_CRYPTO_DEV_EXYNOS_RNG=m
 CONFIG_CRYPTO_DEV_S5P=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=m
-- 
2.34.1

[PATCH v2] arm: multi_v7_defconfig: Enable more OMAP related configs

[Beleswar Padhi]

This allows us to enable various peripherals in the TI OMAP family
platforms like AM571X-IDK, AM572X-IDK, AM574X-IDK, AM57XX-BEAGLE-X15,
AM57XX-EVM using the multi_v7_defconfig, instead of only with the
OMAP specific defconfigs.

DRM_PANEL_OSD_OSD101T2587_53TS:
Enables OSD LCD panel support used in AM57XX evaluation modules.

SPI_TI_QSPI:
Enables TI's QSPI master controller driver for accessing flash devices
on OMAP5 platforms.

Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
---
v2: Changelog:
1. Enabled only OMAP related configs as modules.
Dropped userspace distribution related configs and other generic ones.

Link to v1:
https://lore.kernel.org/all/20250806141808.4013462-1-b-padhi@ti.com/

 arch/arm/configs/multi_v7_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index f2822eeefb95..2b226b0ecaa2 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -453,6 +453,7 @@ CONFIG_SPI_GXP=m
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_FSL_DSPI=m
 CONFIG_SPI_OMAP24XX=y
+CONFIG_SPI_TI_QSPI=m
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_ROCKCHIP=m
@@ -747,6 +748,7 @@ CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
 CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
+CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=m
 CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
-- 
2.34.1

Re: [PATCH v2] arm: multi_v7_defconfig: Enable more OMAP related configs

[Krzysztof Kozlowski]

On 19/08/2025 12:11, Beleswar Padhi wrote:
> This allows us to enable various peripherals in the TI OMAP family
> platforms like AM571X-IDK, AM572X-IDK, AM574X-IDK, AM57XX-BEAGLE-X15,
> AM57XX-EVM using the multi_v7_defconfig, instead of only with the
> OMAP specific defconfigs.
> 
> DRM_PANEL_OSD_OSD101T2587_53TS:
> Enables OSD LCD panel support used in AM57XX evaluation modules.
> 
> SPI_TI_QSPI:
> Enables TI's QSPI master controller driver for accessing flash devices
> on OMAP5 platforms.
> 
> Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v2] arm: multi_v7_defconfig: Enable more OMAP related configs

[Kevin Hilman]

Beleswar Padhi <b-padhi@ti.com> writes:

> This allows us to enable various peripherals in the TI OMAP family
> platforms like AM571X-IDK, AM572X-IDK, AM574X-IDK, AM57XX-BEAGLE-X15,
> AM57XX-EVM using the multi_v7_defconfig, instead of only with the
> OMAP specific defconfigs.
>
> DRM_PANEL_OSD_OSD101T2587_53TS:
> Enables OSD LCD panel support used in AM57XX evaluation modules.
>
> SPI_TI_QSPI:
> Enables TI's QSPI master controller driver for accessing flash devices
> on OMAP5 platforms.
>
> Signed-off-by: Beleswar Padhi <b-padhi@ti.com>

Boot tested on am437x-gp-evm and am57xx-beagle-x15

Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>

Kevin

Re: [PATCH v2] arm: multi_v7_defconfig: Enable more OMAP related configs

[Judith Mendez]

Hi Beleswar,

On 8/19/25 5:11 AM, Beleswar Padhi wrote:
> This allows us to enable various peripherals in the TI OMAP family
> platforms like AM571X-IDK, AM572X-IDK, AM574X-IDK, AM57XX-BEAGLE-X15,
> AM57XX-EVM using the multi_v7_defconfig, instead of only with the
> OMAP specific defconfigs.
> 
> DRM_PANEL_OSD_OSD101T2587_53TS:
> Enables OSD LCD panel support used in AM57XX evaluation modules.
> 
> SPI_TI_QSPI:
> Enables TI's QSPI master controller driver for accessing flash devices
> on OMAP5 platforms.
> 
> Signed-off-by: Beleswar Padhi <b-padhi@ti.com>

Thanks for the patch, QSPI config is needed for am437x.

Reviewed-by: Judith Mendez <jm@ti.com>

Re: [PATCH v2] arm: multi_v7_defconfig: Enable more OMAP related configs

[Beleswar Prasad Padhi]

Hi all,

On 16/06/25 13:50, Beleswar Padhi wrote:
> From: Sinthu Raja <sinthu.raja@ti.com>
>
> This allows us to enable various peripherals in the TI OMAP family
> platforms like AM571X-IDK, AM572X-IDK, AM574X-IDK, AM57XX-BEAGLE-X15,
> AM57XX-EVM using the multi_v7_defconfig, instead of only with the
> OMAP specific defconfigs.


[...]

>
> Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
> Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
> ---
> v2: Changelog:
> Krzysztof:
> 1. Updated commit message to call out which (and why) upstream boards
> need these configs to be enabled.
> 2. Used savedefconfig to correct the order of configs in the defconfig.


A gentle ping on this patch. All of the drivers are enabled as
modules in this patch and the existing review comments
have been addressed.

Please help in a review/merge.

Thanks,
Beleswar

>
> Link to v1:
> https://lore.kernel.org/all/20250611074925.1155547-1-b-padhi@ti.com/
>
>  arch/arm/configs/multi_v7_defconfig | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>
[...]

Re: [PATCH v2] arm: multi_v7_defconfig: Enable more OMAP related configs

[Krzysztof Kozlowski]

On 09/02/2026 10:39, Beleswar Prasad Padhi wrote:
> Hi all,
> 
> On 16/06/25 13:50, Beleswar Padhi wrote:
>> From: Sinthu Raja <sinthu.raja@ti.com>
>>
>> This allows us to enable various peripherals in the TI OMAP family
>> platforms like AM571X-IDK, AM572X-IDK, AM574X-IDK, AM57XX-BEAGLE-X15,
>> AM57XX-EVM using the multi_v7_defconfig, instead of only with the
>> OMAP specific defconfigs.
> 
> 
> [...]
> 
>>
>> Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
>> Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
>> ---
>> v2: Changelog:
>> Krzysztof:
>> 1. Updated commit message to call out which (and why) upstream boards
>> need these configs to be enabled.
>> 2. Used savedefconfig to correct the order of configs in the defconfig.
> 
> 
> A gentle ping on this patch. All of the drivers are enabled as
> modules in this patch and the existing review comments
> have been addressed.
> 
> Please help in a review/merge.


There are no full names next to the emails, so I cannot verify that you
actually Cc-ed right people, but it just looks like you did not. If you
do not Cc the intended maintainer, then the maintainer will not pick it
up. Neither Arnd nor me are OMAP maintainers.

Best regards,
Krzysztof

Re: [PATCH v2] arm: multi_v7_defconfig: Enable more OMAP related configs

[Beleswar Prasad Padhi]

On 09/02/26 15:12, Krzysztof Kozlowski wrote:
> On 09/02/2026 10:39, Beleswar Prasad Padhi wrote:
>> Hi all,
>>
>> On 16/06/25 13:50, Beleswar Padhi wrote:
>>> From: Sinthu Raja <sinthu.raja@ti.com>
>>>
>>> This allows us to enable various peripherals in the TI OMAP family
>>> platforms like AM571X-IDK, AM572X-IDK, AM574X-IDK, AM57XX-BEAGLE-X15,
>>> AM57XX-EVM using the multi_v7_defconfig, instead of only with the
>>> OMAP specific defconfigs.
>>
>> [...]
>>
>>> Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
>>> Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
>>> ---
>>> v2: Changelog:
>>> Krzysztof:
>>> 1. Updated commit message to call out which (and why) upstream boards
>>> need these configs to be enabled.
>>> 2. Used savedefconfig to correct the order of configs in the defconfig.
>>
>> A gentle ping on this patch. All of the drivers are enabled as
>> modules in this patch and the existing review comments
>> have been addressed.
>>
>> Please help in a review/merge.
>
> There are no full names next to the emails, so I cannot verify that you
> actually Cc-ed right people, but it just looks like you did not. If you
> do not Cc the intended maintainer, then the maintainer will not pick it
> up. Neither Arnd nor me are OMAP maintainers.


Thanks, you're right.. will resend the patch with OMAP
maintainers.

Thanks,
Beleswar