From: eric.auger@redhat.com (Auger Eric)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V6 6/8] vfio, platform: make reset driver a requirement by default
Date: Tue, 7 Jun 2016 21:59:56 +0200 [thread overview]
Message-ID: <c3538f11-d206-1ffc-35e0-ff5a7672c7d9@redhat.com> (raw)
In-Reply-To: <1464472878-27176-7-git-send-email-okaya@codeaurora.org>
Le 29/05/2016 ? 00:01, Sinan Kaya a ?crit :
> The code was allowing platform devices to be used without a supporting
> VFIO reset driver. The hardware can be left in some inconsistent state
> after a guest machine abort.
>
> The reset driver will put the hardware back to safe state and disable
> interrupts before returning the control back to the host machine.
>
> Adding a new reset_required kernel module option to AMBA and platform
> VFIO drivers with a default value of true.
>
> New requirements are:
> 1. A reset function needs to be implemented by the corresponding driver
> via DT/ACPI.
> 2. The reset function needs to be discovered via DT/ACPI.
>
> The probe of the driver will fail if any of the above conditions are
> not satisfied.
>
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> ---
> drivers/vfio/platform/vfio_amba.c | 5 +++++
> drivers/vfio/platform/vfio_platform.c | 5 +++++
> drivers/vfio/platform/vfio_platform_common.c | 14 +++++++++++---
> drivers/vfio/platform/vfio_platform_private.h | 1 +
> 4 files changed, 22 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/vfio/platform/vfio_amba.c b/drivers/vfio/platform/vfio_amba.c
> index a66479b..7585902 100644
> --- a/drivers/vfio/platform/vfio_amba.c
> +++ b/drivers/vfio/platform/vfio_amba.c
> @@ -23,6 +23,10 @@
> #define DRIVER_AUTHOR "Antonios Motakis <a.motakis@virtualopensystems.com>"
> #define DRIVER_DESC "VFIO for AMBA devices - User Level meta-driver"
>
> +static bool reset_required = true;
> +module_param(reset_required, bool, 0644);
> +MODULE_PARM_DESC(reset_required, "override reset requirement (default: 1)");
> +
> /* probing devices from the AMBA bus */
>
> static struct resource *get_amba_resource(struct vfio_platform_device *vdev,
> @@ -68,6 +72,7 @@ static int vfio_amba_probe(struct amba_device *adev, const struct amba_id *id)
> vdev->get_resource = get_amba_resource;
> vdev->get_irq = get_amba_irq;
> vdev->parent_module = THIS_MODULE;
> + vdev->reset_required = reset_required;
>
> ret = vfio_platform_probe_common(vdev, &adev->dev);
> if (ret) {
> diff --git a/drivers/vfio/platform/vfio_platform.c b/drivers/vfio/platform/vfio_platform.c
> index b1cc3a7..ef89146 100644
> --- a/drivers/vfio/platform/vfio_platform.c
> +++ b/drivers/vfio/platform/vfio_platform.c
> @@ -23,6 +23,10 @@
> #define DRIVER_AUTHOR "Antonios Motakis <a.motakis@virtualopensystems.com>"
> #define DRIVER_DESC "VFIO for platform devices - User Level meta-driver"
>
> +static bool reset_required = true;
> +module_param(reset_required, bool, 0644);
> +MODULE_PARM_DESC(reset_required, "override reset requirement (default: 1)");
> +
> /* probing devices from the linux platform bus */
>
> static struct resource *get_platform_resource(struct vfio_platform_device *vdev,
> @@ -66,6 +70,7 @@ static int vfio_platform_probe(struct platform_device *pdev)
> vdev->get_resource = get_platform_resource;
> vdev->get_irq = get_platform_irq;
> vdev->parent_module = THIS_MODULE;
> + vdev->reset_required = reset_required;
>
> ret = vfio_platform_probe_common(vdev, &pdev->dev);
> if (ret)
> diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
> index 0ea8c26..e87ceab 100644
> --- a/drivers/vfio/platform/vfio_platform_common.c
> +++ b/drivers/vfio/platform/vfio_platform_common.c
> @@ -128,10 +128,10 @@ static bool vfio_platform_has_reset(struct vfio_platform_device *vdev)
> return vdev->of_reset ? true : false;
> }
>
> -static void vfio_platform_get_reset(struct vfio_platform_device *vdev)
> +static int vfio_platform_get_reset(struct vfio_platform_device *vdev)
> {
> if (vdev->acpihid)
> - return;
> + return vfio_platform_acpi_has_reset(vdev) ? 0 : -ENOENT;
>
> vdev->of_reset = vfio_platform_lookup_reset(vdev->compat,
> &vdev->reset_module);
> @@ -140,6 +140,8 @@ static void vfio_platform_get_reset(struct vfio_platform_device *vdev)
> vdev->of_reset = vfio_platform_lookup_reset(vdev->compat,
> &vdev->reset_module);
> }
> +
> + return vdev->of_reset ? 0 : -ENOENT;
> }
>
> static void vfio_platform_put_reset(struct vfio_platform_device *vdev)
> @@ -675,7 +677,13 @@ int vfio_platform_probe_common(struct vfio_platform_device *vdev,
> return ret;
> }
>
> - vfio_platform_get_reset(vdev);
> + ret = vfio_platform_get_reset(vdev);
> + if (ret && vdev->reset_required) {
> + pr_err("vfio: no reset function found for device %s\n",
> + vdev->name);
> + iommu_group_put(group);
> + return ret;
nit: in case you respin you can factorize the group put and return ret in a goto label
(since also used above).
Besides Reviewed-by: Eric Auger <eric.auger@redhat.com>
Thanks
Eric
> + }
>
> mutex_init(&vdev->igate);
>
> diff --git a/drivers/vfio/platform/vfio_platform_private.h b/drivers/vfio/platform/vfio_platform_private.h
> index ba9e4f8..68fbc00 100644
> --- a/drivers/vfio/platform/vfio_platform_private.h
> +++ b/drivers/vfio/platform/vfio_platform_private.h
> @@ -50,6 +50,7 @@ struct vfio_platform_region {
> };
>
> struct vfio_platform_device {
> + bool reset_required;
> struct vfio_platform_region *regions;
> u32 num_regions;
> struct vfio_platform_irq *irqs;
>
next prev parent reply other threads:[~2016-06-07 19:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-28 22:01 [PATCH V6 0/8] vfio, platform: add ACPI support Sinan Kaya
2016-05-28 22:01 ` [PATCH V6 1/8] vfio: platform: move reset call to a common function Sinan Kaya
2016-05-28 22:01 ` [PATCH V6 2/8] vfio: platform: determine reset capability Sinan Kaya
2016-05-28 22:01 ` [PATCH V6 3/8] vfio: platform: add support for ACPI probe Sinan Kaya
2016-05-28 22:01 ` [PATCH V6 4/8] vfio: platform: add extra debug info argument to call reset Sinan Kaya
2016-05-28 22:01 ` [PATCH V6 5/8] vfio: platform: call _RST method when using ACPI Sinan Kaya
2016-06-07 20:14 ` Auger Eric
2016-06-08 22:31 ` Rafael J. Wysocki
2016-06-09 2:33 ` Sinan Kaya
2016-06-13 3:41 ` Sinan Kaya
2016-05-28 22:01 ` [PATCH V6 6/8] vfio, platform: make reset driver a requirement by default Sinan Kaya
2016-06-07 19:59 ` Auger Eric [this message]
2016-06-13 2:32 ` Sinan Kaya
2016-05-28 22:01 ` [PATCH V6 7/8] vfio: platform: check reset call return code during open Sinan Kaya
2016-06-07 20:21 ` Auger Eric
2016-06-13 3:12 ` Sinan Kaya
2016-05-28 22:01 ` [PATCH V6 8/8] vfio: platform: check reset call return code during release Sinan Kaya
2016-06-07 20:28 ` Auger Eric
2016-06-07 20:37 ` [PATCH V6 0/8] vfio, platform: add ACPI support Auger Eric
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c3538f11-d206-1ffc-35e0-ff5a7672c7d9@redhat.com \
--to=eric.auger@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).