From mboxrd@z Thu Jan 1 00:00:00 1970 From: mugunthanvnm@ti.com (Mugunthan V N) Date: Wed, 5 Oct 2016 08:59:14 +0530 Subject: [PATCH v2 3/4] ARM: dts: dra72-evm-revc: fix correct phy delay and impedance settings In-Reply-To: References: <20161004125607.10569-1-mugunthanvnm@ti.com> <20161004125607.10569-4-mugunthanvnm@ti.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tuesday 04 October 2016 06:41 PM, Lokesh Vutla wrote: > > On Tuesday 04 October 2016 06:26 PM, Mugunthan V N wrote: >> > The default impedance settings of the phy is not the optimal >> > value, due to this the second ethernet is not working. Fix it >> > with correct values which makes the second ethernet port to work. >> > >> > Signed-off-by: Mugunthan V N >> > --- >> > arch/arm/boot/dts/dra72-evm-revc.dts | 2 ++ >> > 1 file changed, 2 insertions(+) >> > >> > diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts >> > index f9cfd3b..d626cd7 100644 >> > --- a/arch/arm/boot/dts/dra72-evm-revc.dts >> > +++ b/arch/arm/boot/dts/dra72-evm-revc.dts >> > @@ -62,6 +62,7 @@ >> > ti,rx-internal-delay = ; >> > ti,tx-internal-delay = ; >> > ti,fifo-depth = ; >> > + ti,min-output-imepdance; > s/imepdance/impedance > Thanks for quick catch. Will fix this in v3. Regards Mugunthan V N