linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: thor.thayer@linux.intel.com (Thor Thayer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] edac: altera: Add support for Stratix10 SDRAM EDAC
Date: Thu, 26 Apr 2018 09:42:55 -0500	[thread overview]
Message-ID: <c66406a5-a73f-944c-ddc4-356795f8fdca@linux.intel.com> (raw)
In-Reply-To: <2d310ff0-fa0e-e432-ae11-ba34080b4f6e@kernel.org>

On 04/25/2018 09:14 PM, Dinh Nguyen wrote:
> 
> 
> On 04/24/2018 01:35 PM, thor.thayer at linux.intel.com wrote:
>> From: Thor Thayer <thor.thayer@linux.intel.com>
>>
>> Add support for SDRAM ECC on the Stratix10 platform to
>> the EDAC device driver. Although Stratix10 is very similar
>> to the Arria10, hypervisor support for Stratix10 SDRAM ECC
>> requires the use of SMC calls to a higher priority
>> exception level to handle some register reads/writes.
>>
>> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
>> ---
>>   drivers/edac/Kconfig       |   2 +-
>>   drivers/edac/altera_edac.c | 459 +++++++++++++++++++++++++++++++++++++++++++++
>>   drivers/edac/altera_edac.h | 114 +++++++++++
> 
> Does it make sense to have the support for this in separate files?
> 
>>   3 files changed, 574 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
>> index 3c4017007647..3c66b02b2473 100644
>> --- a/drivers/edac/Kconfig
>> +++ b/drivers/edac/Kconfig
>> @@ -379,7 +379,7 @@ config EDAC_THUNDERX
>>   
>>   config EDAC_ALTERA
>>   	bool "Altera SOCFPGA ECC"
>> -	depends on EDAC=y && ARCH_SOCFPGA
>> +	depends on EDAC=y && (ARCH_SOCFPGA || ARM64)
> 
> Should the ARM64 dependency just be ARCH_STRATIX10?
> 
Yes, I will update this.

>>   	help
>>   	  Support for error detection and correction on the
>>   	  Altera SOCs. This must be selected for SDRAM ECC.
>> diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
>> index 11d6419788c2..7ed885379719 100644
>> --- a/drivers/edac/altera_edac.c
>> +++ b/drivers/edac/altera_edac.c
>> @@ -1,4 +1,5 @@
>>   /*
>> + *  Copyright (C) 2017-2018, Intel Corporation
> 
> If you're updating the license header, would it make sense to convert to
> SPDX?
> 
Yes, I can do that.

> Dinh
> --
> To unsubscribe from this list: send the line "unsubscribe linux-edac" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

  parent reply	other threads:[~2018-04-26 14:42 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-24 18:35 [PATCH 0/3] Add SDRAM ECC support for Stratix10 thor.thayer at linux.intel.com
2018-04-24 18:35 ` [PATCH 1/3] Documentation: dt: socfpga: Add Stratix10 ECC Manager binding thor.thayer at linux.intel.com
2018-04-26  2:16   ` Dinh Nguyen
2018-04-26 14:43     ` Thor Thayer
2018-04-26 14:58       ` Thor Thayer
2018-04-26 15:01         ` Dinh Nguyen
2018-04-26 15:06           ` Rob Herring
2018-04-24 18:35 ` [PATCH 2/3] edac: altera: Add support for Stratix10 SDRAM EDAC thor.thayer at linux.intel.com
2018-04-26  2:14   ` Dinh Nguyen
2018-04-26  6:08     ` Borislav Petkov
2018-04-26 14:42     ` Thor Thayer [this message]
2018-04-24 18:35 ` [PATCH 3/3] arm64: dts: stratix10: add sdram ecc thor.thayer at linux.intel.com

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c66406a5-a73f-944c-ddc4-356795f8fdca@linux.intel.com \
    --to=thor.thayer@linux.intel.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).