From mboxrd@z Thu Jan 1 00:00:00 1970 From: slongerbeam@gmail.com (Steve Longerbeam) Date: Wed, 14 Jun 2017 09:45:43 -0700 Subject: [PATCH 00/11] ARM: dts: imx6qdl: video capture support In-Reply-To: <20170614150938.GB30112@dragon> References: <1497291844-14632-1-git-send-email-steve_longerbeam@mentor.com> <20170614150938.GB30112@dragon> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 06/14/2017 08:09 AM, Shawn Guo wrote: > On Mon, Jun 12, 2017 at 11:23:53AM -0700, Steve Longerbeam wrote: >> This series defines the i.MX6 internal video multiplexers and MIPI CSI-2 >> receiver device nodes, and their connections to eachother and the i.MX6 >> IPU CSI ports. >> >> It also implements video capture support on the SabreLite, SabreSD, and >> SabreAuto reference platforms, by defining the video sensor nodes on those >> platforms, and their connections to the video muxes and MIPI CSI-2 receiver. >> >> There should not be much of anything controversial in this series. The >> imx-media driver is set to be merged in time for 4.13, so please accept >> this series soon. >> >> >> Philipp Zabel (2): >> ARM: dts: imx6qdl: add multiplexer controls >> ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their >> connections >> >> Steve Longerbeam (9): >> ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node >> ARM: dts: imx6qdl: add capture-subsystem device >> ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround >> ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors >> ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors >> ARM: dts: imx6-sabreauto: create i2cmux for i2c3 >> ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b >> ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture >> ARM: dts: imx6-sabreauto: add the ADV7180 video decoder > > Applied all, thanks. > Thanks Shawn! Steve