From mboxrd@z Thu Jan 1 00:00:00 1970 From: alexandre.torgue@st.com (Alexandre Torgue) Date: Tue, 7 Nov 2017 14:11:01 +0100 Subject: [PATCH v3 0/9] irqchip: stm32: add stm32h7 support In-Reply-To: <2f41fc16-6ed2-2d44-52e9-5461c86baf75@st.com> References: <1509987819-29599-1-git-send-email-ludovic.Barre@st.com> <04d9d728-7f9f-6bc0-bb57-c7bb49817872@arm.com> <2f41fc16-6ed2-2d44-52e9-5461c86baf75@st.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi On 11/07/2017 02:06 PM, Ludovic BARRE wrote: > hi Marc > > normally, Alex take the last 3 ("ARM: dts") > commits in his branch, and will send in his pull request > Alex you confirm? Yes. I will merge DT patches in my next pull request (for 4. 16) Regards Alex > > BR > Ludo > > On 11/07/2017 12:23 PM, Marc Zyngier wrote: >> Hi Ludovic, >> >> On 06/11/17 17:03, Ludovic Barre wrote: >>> From: Ludovic Barre >>> >>> This series adds: >>> -Management of multi-bank of external interrupts >>> stm32h7 has up to 96 inputs (3 banks of? 32 inputs). >>> -Fix initial value after cold/hot boot (wakeup issue). >>> >>> Changes v3: >>> -remove chip.name and handler, already done by >>> irq_alloc_domain_generic_chips >>> -add Rob ack in dt-bindings commit >>> >>> Changes v2: >>> -Remove irq_mask and adds const on struct stm32_exti_bank >>> -Add wrapper functions pending and ack >>> -Replace BITS_PER_LONG by IRQS_PER_BANK >>> -Fill commit message on >>> "ARM: dts: stm32: add support of exti on stm32h743" >>> -Add system config bank for stm32h7 >>> >>> Ludovic Barre (9): >>> ?? irqchip: stm32: select GENERIC_IRQ_CHIP >>> ?? irqchip: stm32: add multi-bank management >>> ?? dt-bindings: interrupt-controllers: add compatible string for stm32h7 >>> ?? irqchip: stm32: add stm32h7 support >>> ?? irqchip: stm32: fix initial values >>> ?? irqchip: stm32: move the wakeup on interrupt mask >>> ?? ARM: dts: stm32: add exti support for stm32h743 >>> ?? ARM: dts: stm32: add system config bank node for stm32h743 >>> ?? ARM: dts: stm32: add support of exti on stm32h743 pinctrl >>> >>> ? .../interrupt-controller/st,stm32-exti.txt???????? |?? 4 +- >>> ? arch/arm/boot/dts/stm32h743-pinctrl.dtsi?????????? |? 24 +++ >>> ? arch/arm/boot/dts/stm32h743.dtsi?????????????????? |? 13 ++ >>> ? drivers/irqchip/Kconfig??????????????????????????? |?? 1 + >>> ? drivers/irqchip/irq-stm32-exti.c?????????????????? | 206 >>> ++++++++++++++++----- >>> ? 5 files changed, 198 insertions(+), 50 deletions(-) >>> >> >> I'm happy to take the first 6 patches through the irqchip tree. How >> about the last 3? I'd rather see them routed via armsoc if there is any >> risk of merge conflicts. >> >> How do you want to proceed? >> >> Thanks, >> >> ????M. >>