linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Neha Malcom Francis <n-francis@ti.com>
To: "Kumar, Udit" <u-kumar1@ti.com>, <robh@kernel.org>,
	<conor+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<vigneshr@ti.com>, <nm@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<kristo@kernel.org>
Subject: Re: [PATCH v2 5/5] arm64: dts: ti: k3-j7200-mcu: Add the MCU domain watchdog instances
Date: Fri, 12 Apr 2024 10:35:58 +0530	[thread overview]
Message-ID: <cb3bb55c-b6ed-4e17-bafa-b83b19cdd5eb@ti.com> (raw)
In-Reply-To: <fd22f818-f123-482a-97ff-6f113bc08164@ti.com>

Hi Udit

On 12/04/24 10:33, Kumar, Udit wrote:
> Hi Neha
> 
> On 4/12/2024 9:55 AM, Neha Malcom Francis wrote:
>> There are 2 watchdog instances in the MCU domain. These instances are
>> coupled with the MCU domain R55 instances. Reserve them as they are not
>> used by A72.
>>
>> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
>> ---
>> Changes since v1:
>> - patch added
>>
>>   .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 26 +++++++++++++++++++
>>   1 file changed, 26 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi 
>> b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
>> index 7cf21c99956e..d1a42c3f30c0 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
>> @@ -686,4 +686,30 @@ mcu_mcan1: can@40568000 {
>>           bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
>>           status = "disabled";
>>       };
>> +
>> +    /*
>> +     * The 2 RTI instances are couple with MCU R5Fs so keeping them
>> +     * reserved as these will be used by their respective firmware
>> +     */
>> +    mcu_watchdog0: watchdog@40600000 {
>> +        compatible = "ti,j7-rti-wdt";
>> +        reg = <0x00 0x40600000 0x00 0xbd>;
> 
> 
> please refer  Table 2-3. MCU Domain Memory Map of TRM.
> 
> Size of wdt is 0x100 , with this change in size from 0xbd to 0x100.
> 
> you can use
> 
> Reviewed-by: Udit Kumar <u-kumar1@ti.com>  for whole series

Thank you for catching that! Sending v3 soon!

> 
>> +        clocks = <&k3_clks 262 1>;
>> +        power-domains = <&k3_pds 262 TI_SCI_PD_EXCLUSIVE>;
>> +        assigned-clocks = <&k3_clks 262 1>;
>> +        assigned-clock-parents = <&k3_clks 262 5>;
>> +        /* reserved for MCU_R5F0_0 */
>> +        status = "reserved";
>> +    };
>> +
>> +    mcu_watchdog1: watchdog@40610000 {
>> +        compatible = "ti,j7-rti-wdt";
>> +        reg = <0x00 0x40610000 0x00 0xbd>;
>> +        clocks = <&k3_clks 263 1>;
>> +        power-domains = <&k3_pds 263 TI_SCI_PD_EXCLUSIVE>;
>> +        assigned-clocks = <&k3_clks 263 1>;
>> +        assigned-clock-parents = <&k3_clks 263 5>;
>> +        /* reserved for MCU_R5F0_1 */
>> +        status = "reserved";
>> +    };
>>   };

-- 
Thanking You
Neha Malcom Francis

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

      reply	other threads:[~2024-04-12  5:06 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-12  4:25 [PATCH v2 0/5] arm64: dts: ti: k3-j7*: Add missing ESM and watchdog nodes Neha Malcom Francis
2024-04-12  4:25 ` [PATCH v2 1/5] arm64: dts: ti: k3-j721e-mcu: Add the WKUP ESM instance Neha Malcom Francis
2024-04-12  4:25 ` [PATCH v2 2/5] arm64: dts: ti: k3-j721e-mcu: Add the MCU domain watchdog instances Neha Malcom Francis
2024-04-12  4:25 ` [PATCH v2 3/5] arm64: dts: ti: k3-j721e-main: Add the MAIN " Neha Malcom Francis
2024-04-12  4:25 ` [PATCH v2 4/5] arm64: dts: ti: k3-j7200-main: " Neha Malcom Francis
2024-04-12  4:25 ` [PATCH v2 5/5] arm64: dts: ti: k3-j7200-mcu: Add the MCU " Neha Malcom Francis
2024-04-12  5:03   ` Kumar, Udit
2024-04-12  5:05     ` Neha Malcom Francis [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cb3bb55c-b6ed-4e17-bafa-b83b19cdd5eb@ti.com \
    --to=n-francis@ti.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=u-kumar1@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).