[PATCH 1/3] ARM: sunxi: add support for H2+ SoC

[PATCH 1/3] ARM: sunxi: add support for H2+ SoC

[Icenowy Zheng]

Allwinner H2+ is a quad-core Cortex-A7 SoC.

It is very like H3, that they share the same SoC ID (0x1680), and H3
memory maps as well as drivers works well on the SoC.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
 Documentation/arm/sunxi/README                  | 4 ++++
 Documentation/devicetree/bindings/arm/sunxi.txt | 1 +
 arch/arm/mach-sunxi/sunxi.c                     | 1 +
 3 files changed, 6 insertions(+)

diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
index cd02433..1fe4d99c 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@@ -63,6 +63,10 @@ SunXi family
         + User Manual
           http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
 
+      - Allwinner H2+ (sun8i)
+        + No document available now, but is known to be working properly with
+          H3 drivers and memory map.
+
       - Allwinner H3 (sun8i)
         + Datasheet
           http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
index 3975d0a..0c0f277 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@@ -13,5 +13,6 @@ using one of the following compatible strings:
   allwinner,sun8i-a33
   allwinner,sun8i-a83t
   allwinner,sun8i-h3
+  allwinner,sun8i-h2plus
   allwinner,sun9i-a80
   nextthing,gr8
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 2e2bde2..3647ad7 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -63,6 +63,7 @@ static const char * const sun8i_board_dt_compat[] = {
 	"allwinner,sun8i-a23",
 	"allwinner,sun8i-a33",
 	"allwinner,sun8i-a83t",
+	"allwinner,sun8i-h2plus",
 	"allwinner,sun8i-h3",
 	NULL,
 };
-- 
2.10.1

[PATCH 2/3] ARM: dts: sunxi: add Allwinner H2+ dtsi

[Icenowy Zheng]

Allwinner H2+ is a SoC so similar with H3 that H3 drivers and memory map
is known to work well on H2+, with both BSP kernel/firmware or the
mainline ones.

So add a dtsi file which only include the H3 dtsi only, so we can add
H2+-specified nodes in the dtsi file when we find any software
difference between H2+ and H3.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
 arch/arm/boot/dts/sun8i-h2plus.dtsi | 43 +++++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-h2plus.dtsi

diff --git a/arch/arm/boot/dts/sun8i-h2plus.dtsi b/arch/arm/boot/dts/sun8i-h2plus.dtsi
new file mode 100644
index 0000000..76fc3d0
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h2plus.dtsi
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3.dtsi"
-- 
2.10.1

[PATCH 2/3] ARM: dts: sunxi: add Allwinner H2+ dtsi

[Maxime Ripard]

On Sat, Nov 12, 2016 at 12:46:53AM +0800, Icenowy Zheng wrote:
> Allwinner H2+ is a SoC so similar with H3 that H3 drivers and memory map
> is known to work well on H2+, with both BSP kernel/firmware or the
> mainline ones.
> 
> So add a dtsi file which only include the H3 dtsi only, so we can add
> H2+-specified nodes in the dtsi file when we find any software
> difference between H2+ and H3.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>

I don't think we need that patch at all. You can do it just like we
did for the R8 and R16, just include the H3 DTSI in your board. We'll
create it if we need it at some point.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161114/1a597c68/attachment-0001.sig>

[PATCH 3/3] ARM: dts: sunxi: add support for Orange Pi Zero board

[Icenowy Zheng]

Orange Pi Zero is a board that came with the new Allwinner H2+ SoC.

Add a device tree file for it.

As there's still no mainline-compatible driver for the SDIO WLAN card on
board (a new card by Allwinner), the mmc1 controller is not enabled yet.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
 arch/arm/boot/dts/Makefile                       |   1 +
 arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts | 148 +++++++++++++++++++++++
 2 files changed, 149 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index befcd26..9843fb0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -818,6 +818,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a33-sinlinx-sina33.dtb \
 	sun8i-a83t-allwinner-h8homlet-v2.dtb \
 	sun8i-a83t-cubietruck-plus.dtb \
+	sun8i-h2plus-orangepi-zero.dtb \
 	sun8i-h3-bananapi-m2-plus.dtb \
 	sun8i-h3-nanopi-neo.dtb \
 	sun8i-h3-orangepi-2.dtb \
diff --git a/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts
new file mode 100644
index 0000000..581f56e
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts
@@ -0,0 +1,148 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-h3-orangepi-one.dts, which is:
+ *   Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h2plus.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi Zero";
+	compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2plus",
+		     "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_opi0>, <&leds_r_opi0>;
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	leds_opi0: led_pins at 0 {
+		allwinner,pins = "PA17";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	leds_r_opi0: led_pins at 0 {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
-- 
2.10.1

[PATCH 3/3] ARM: dts: sunxi: add support for Orange Pi Zero board

[Maxime Ripard]

Hi,

On Sat, Nov 12, 2016 at 12:46:54AM +0800, Icenowy Zheng wrote:
> Orange Pi Zero is a board that came with the new Allwinner H2+ SoC.
> 
> Add a device tree file for it.
> 
> As there's still no mainline-compatible driver for the SDIO WLAN card on
> board (a new card by Allwinner), the mmc1 controller is not enabled yet.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
>  arch/arm/boot/dts/Makefile                       |   1 +
>  arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts | 148 +++++++++++++++++++++++
>  2 files changed, 149 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index befcd26..9843fb0 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -818,6 +818,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
>  	sun8i-a33-sinlinx-sina33.dtb \
>  	sun8i-a83t-allwinner-h8homlet-v2.dtb \
>  	sun8i-a83t-cubietruck-plus.dtb \
> +	sun8i-h2plus-orangepi-zero.dtb \
>  	sun8i-h3-bananapi-m2-plus.dtb \
>  	sun8i-h3-nanopi-neo.dtb \
>  	sun8i-h3-orangepi-2.dtb \
> diff --git a/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts
> new file mode 100644
> index 0000000..581f56e
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts
> @@ -0,0 +1,148 @@
> +/*
> + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
> + *
> + * Based on sun8i-h3-orangepi-one.dts, which is:
> + *   Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "sun8i-h2plus.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/sun4i-a10.h>
> +
> +/ {
> +	model = "Xunlong Orange Pi Zero";
> +	compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2plus",
> +		     "allwinner,sun8i-h3";

You don't need the H3 compatible here.

> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&leds_opi0>, <&leds_r_opi0>;
> +
> +		pwr_led {
> +			label = "orangepi:green:pwr";
> +			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
> +			default-state = "on";
> +		};
> +
> +		status_led {
> +			label = "orangepi:red:status";
> +			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +};
> +
> +&ehci1 {
> +	status = "okay";
> +};
> +
> +&mmc0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
> +	vmmc-supply = <&reg_vcc3v3>;
> +	bus-width = <4>;
> +	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
> +	cd-inverted;
> +	status = "okay";
> +};
> +
> +&ohci1 {
> +	status = "okay";
> +};
> +
> +&pio {
> +	leds_opi0: led_pins at 0 {
> +		allwinner,pins = "PA17";
> +		allwinner,function = "gpio_out";
> +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +	};
> +};
> +
> +&r_pio {
> +	leds_r_opi0: led_pins at 0 {
> +		allwinner,pins = "PL10";
> +		allwinner,function = "gpio_out";
> +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

You can drop the drive and pull properties, and could you use the
generic pins and function properties for those nodes?

> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pins_a>;
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart1_pins>;
> +	status = "disabled";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart2_pins>;
> +	status = "disabled";
> +};
> +
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart3_pins>;
> +	status = "disabled";
> +};

I'm guessing that those UART are exposed on headers?

> +
> +&usbphy {
> +	/* USB VBUS is always on */

You can put the always on regulators (I'm guessing reg_vcc5v0 ?) here.

> +	status = "okay";
> +};

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161114/7d01c738/attachment.sig>

[PATCH 3/3] ARM: dts: sunxi: add support for Orange Pi Zero board

[Chen-Yu Tsai]

On Mon, Nov 14, 2016 at 4:58 PM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> Hi,
>
> On Sat, Nov 12, 2016 at 12:46:54AM +0800, Icenowy Zheng wrote:
>> Orange Pi Zero is a board that came with the new Allwinner H2+ SoC.
>>
>> Add a device tree file for it.
>>
>> As there's still no mainline-compatible driver for the SDIO WLAN card on
>> board (a new card by Allwinner), the mmc1 controller is not enabled yet.
>>
>> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
>> ---
>>  arch/arm/boot/dts/Makefile                       |   1 +
>>  arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts | 148 +++++++++++++++++++++++
>>  2 files changed, 149 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index befcd26..9843fb0 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -818,6 +818,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
>>       sun8i-a33-sinlinx-sina33.dtb \
>>       sun8i-a83t-allwinner-h8homlet-v2.dtb \
>>       sun8i-a83t-cubietruck-plus.dtb \
>> +     sun8i-h2plus-orangepi-zero.dtb \
>>       sun8i-h3-bananapi-m2-plus.dtb \
>>       sun8i-h3-nanopi-neo.dtb \
>>       sun8i-h3-orangepi-2.dtb \
>> diff --git a/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts
>> new file mode 100644
>> index 0000000..581f56e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts
>> @@ -0,0 +1,148 @@
>> +/*
>> + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
>> + *
>> + * Based on sun8i-h3-orangepi-one.dts, which is:
>> + *   Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + *  a) This file is free software; you can redistribute it and/or
>> + *     modify it under the terms of the GNU General Public License as
>> + *     published by the Free Software Foundation; either version 2 of the
>> + *     License, or (at your option) any later version.
>> + *
>> + *     This file is distributed in the hope that it will be useful,
>> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + *     GNU General Public License for more details.
>> + *
>> + * Or, alternatively,
>> + *
>> + *  b) Permission is hereby granted, free of charge, to any person
>> + *     obtaining a copy of this software and associated documentation
>> + *     files (the "Software"), to deal in the Software without
>> + *     restriction, including without limitation the rights to use,
>> + *     copy, modify, merge, publish, distribute, sublicense, and/or
>> + *     sell copies of the Software, and to permit persons to whom the
>> + *     Software is furnished to do so, subject to the following
>> + *     conditions:
>> + *
>> + *     The above copyright notice and this permission notice shall be
>> + *     included in all copies or substantial portions of the Software.
>> + *
>> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + *     OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/dts-v1/;
>> +#include "sun8i-h2plus.dtsi"
>> +#include "sunxi-common-regulators.dtsi"
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +#include <dt-bindings/pinctrl/sun4i-a10.h>
>> +
>> +/ {
>> +     model = "Xunlong Orange Pi Zero";
>> +     compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2plus",
>> +                  "allwinner,sun8i-h3";
>
> You don't need the H3 compatible here.
>
>> +
>> +     aliases {
>> +             serial0 = &uart0;
>> +     };
>> +
>> +     chosen {
>> +             stdout-path = "serial0:115200n8";
>> +     };
>> +
>> +     leds {
>> +             compatible = "gpio-leds";
>> +             pinctrl-names = "default";
>> +             pinctrl-0 = <&leds_opi0>, <&leds_r_opi0>;
>> +
>> +             pwr_led {
>> +                     label = "orangepi:green:pwr";
>> +                     gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
>> +                     default-state = "on";
>> +             };
>> +
>> +             status_led {
>> +                     label = "orangepi:red:status";
>> +                     gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
>> +             };
>> +     };
>> +};
>> +
>> +&ehci1 {
>> +     status = "okay";
>> +};
>> +
>> +&mmc0 {
>> +     pinctrl-names = "default";
>> +     pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
>> +     vmmc-supply = <&reg_vcc3v3>;
>> +     bus-width = <4>;
>> +     cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
>> +     cd-inverted;
>> +     status = "okay";
>> +};
>> +
>> +&ohci1 {
>> +     status = "okay";
>> +};
>> +
>> +&pio {
>> +     leds_opi0: led_pins at 0 {
>> +             allwinner,pins = "PA17";
>> +             allwinner,function = "gpio_out";
>> +             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> +     };
>> +};
>> +
>> +&r_pio {
>> +     leds_r_opi0: led_pins at 0 {
>> +             allwinner,pins = "PL10";
>> +             allwinner,function = "gpio_out";
>> +             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> +             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>
> You can drop the drive and pull properties, and could you use the
> generic pins and function properties for those nodes?

Icenowy,
Given that sunxi-next is currently broken for the pinctrl stuff,
you will need this patch to test, until Linus merges it:

    https://github.com/wens/linux/commit/e8ce92925a6dd1b2b38ed8699e81d0bc9804de20

>
>> +     };
>> +};
>> +
>> +&uart0 {
>> +     pinctrl-names = "default";
>> +     pinctrl-0 = <&uart0_pins_a>;
>> +     status = "okay";
>> +};
>> +
>> +&uart1 {
>> +     pinctrl-names = "default";
>> +     pinctrl-0 = <&uart1_pins>;
>> +     status = "disabled";
>> +};
>> +
>> +&uart2 {
>> +     pinctrl-names = "default";
>> +     pinctrl-0 = <&uart2_pins>;
>> +     status = "disabled";
>> +};
>> +
>> +&uart3 {
>> +     pinctrl-names = "default";
>> +     pinctrl-0 = <&uart3_pins>;
>> +     status = "disabled";
>> +};
>
> I'm guessing that those UART are exposed on headers?
>
>> +
>> +&usbphy {
>> +     /* USB VBUS is always on */
>
> You can put the always on regulators (I'm guessing reg_vcc5v0 ?) here.

AFAIK the regulator properties are optional the the USB PHY.
So we probably don't need to add it. Hans (CC-ed) could explain
his original intent?

Regards
ChenYu

>
>> +     status = "okay";
>> +};
>
> Thanks,
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

[linux-sunxi] Re: [PATCH 3/3] ARM: dts: sunxi: add support for Orange Pi Zero board

[Hans de Goede]

HI,

On 14-11-16 10:09, Chen-Yu Tsai wrote:
> On Mon, Nov 14, 2016 at 4:58 PM, Maxime Ripard
> <maxime.ripard@free-electrons.com> wrote:
>> Hi,
>>
>> On Sat, Nov 12, 2016 at 12:46:54AM +0800, Icenowy Zheng wrote:
>>> Orange Pi Zero is a board that came with the new Allwinner H2+ SoC.
>>>
>>> Add a device tree file for it.
>>>
>>> As there's still no mainline-compatible driver for the SDIO WLAN card on
>>> board (a new card by Allwinner), the mmc1 controller is not enabled yet.
>>>
>>> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
>>> ---
>>>  arch/arm/boot/dts/Makefile                       |   1 +
>>>  arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts | 148 +++++++++++++++++++++++
>>>  2 files changed, 149 insertions(+)
>>>  create mode 100644 arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index befcd26..9843fb0 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -818,6 +818,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
>>>       sun8i-a33-sinlinx-sina33.dtb \
>>>       sun8i-a83t-allwinner-h8homlet-v2.dtb \
>>>       sun8i-a83t-cubietruck-plus.dtb \
>>> +     sun8i-h2plus-orangepi-zero.dtb \
>>>       sun8i-h3-bananapi-m2-plus.dtb \
>>>       sun8i-h3-nanopi-neo.dtb \
>>>       sun8i-h3-orangepi-2.dtb \
>>> diff --git a/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts
>>> new file mode 100644
>>> index 0000000..581f56e
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/sun8i-h2plus-orangepi-zero.dts
>>> @@ -0,0 +1,148 @@
>>> +/*
>>> + * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
>>> + *
>>> + * Based on sun8i-h3-orangepi-one.dts, which is:
>>> + *   Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
>>> + *
>>> + * This file is dual-licensed: you can use it either under the terms
>>> + * of the GPL or the X11 license, at your option. Note that this dual
>>> + * licensing only applies to this file, and not this project as a
>>> + * whole.
>>> + *
>>> + *  a) This file is free software; you can redistribute it and/or
>>> + *     modify it under the terms of the GNU General Public License as
>>> + *     published by the Free Software Foundation; either version 2 of the
>>> + *     License, or (at your option) any later version.
>>> + *
>>> + *     This file is distributed in the hope that it will be useful,
>>> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>> + *     GNU General Public License for more details.
>>> + *
>>> + * Or, alternatively,
>>> + *
>>> + *  b) Permission is hereby granted, free of charge, to any person
>>> + *     obtaining a copy of this software and associated documentation
>>> + *     files (the "Software"), to deal in the Software without
>>> + *     restriction, including without limitation the rights to use,
>>> + *     copy, modify, merge, publish, distribute, sublicense, and/or
>>> + *     sell copies of the Software, and to permit persons to whom the
>>> + *     Software is furnished to do so, subject to the following
>>> + *     conditions:
>>> + *
>>> + *     The above copyright notice and this permission notice shall be
>>> + *     included in all copies or substantial portions of the Software.
>>> + *
>>> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>>> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>>> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>>> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>>> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>>> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>>> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>>> + *     OTHER DEALINGS IN THE SOFTWARE.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include "sun8i-h2plus.dtsi"
>>> +#include "sunxi-common-regulators.dtsi"
>>> +
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +#include <dt-bindings/input/input.h>
>>> +#include <dt-bindings/pinctrl/sun4i-a10.h>
>>> +
>>> +/ {
>>> +     model = "Xunlong Orange Pi Zero";
>>> +     compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2plus",
>>> +                  "allwinner,sun8i-h3";
>>
>> You don't need the H3 compatible here.
>>
>>> +
>>> +     aliases {
>>> +             serial0 = &uart0;
>>> +     };
>>> +
>>> +     chosen {
>>> +             stdout-path = "serial0:115200n8";
>>> +     };
>>> +
>>> +     leds {
>>> +             compatible = "gpio-leds";
>>> +             pinctrl-names = "default";
>>> +             pinctrl-0 = <&leds_opi0>, <&leds_r_opi0>;
>>> +
>>> +             pwr_led {
>>> +                     label = "orangepi:green:pwr";
>>> +                     gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
>>> +                     default-state = "on";
>>> +             };
>>> +
>>> +             status_led {
>>> +                     label = "orangepi:red:status";
>>> +                     gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
>>> +             };
>>> +     };
>>> +};
>>> +
>>> +&ehci1 {
>>> +     status = "okay";
>>> +};
>>> +
>>> +&mmc0 {
>>> +     pinctrl-names = "default";
>>> +     pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
>>> +     vmmc-supply = <&reg_vcc3v3>;
>>> +     bus-width = <4>;
>>> +     cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
>>> +     cd-inverted;
>>> +     status = "okay";
>>> +};
>>> +
>>> +&ohci1 {
>>> +     status = "okay";
>>> +};
>>> +
>>> +&pio {
>>> +     leds_opi0: led_pins at 0 {
>>> +             allwinner,pins = "PA17";
>>> +             allwinner,function = "gpio_out";
>>> +             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>>> +             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>>> +     };
>>> +};
>>> +
>>> +&r_pio {
>>> +     leds_r_opi0: led_pins at 0 {
>>> +             allwinner,pins = "PL10";
>>> +             allwinner,function = "gpio_out";
>>> +             allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>>> +             allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>>
>> You can drop the drive and pull properties, and could you use the
>> generic pins and function properties for those nodes?
>
> Icenowy,
> Given that sunxi-next is currently broken for the pinctrl stuff,
> you will need this patch to test, until Linus merges it:
>
>     https://github.com/wens/linux/commit/e8ce92925a6dd1b2b38ed8699e81d0bc9804de20
>
>>
>>> +     };
>>> +};
>>> +
>>> +&uart0 {
>>> +     pinctrl-names = "default";
>>> +     pinctrl-0 = <&uart0_pins_a>;
>>> +     status = "okay";
>>> +};
>>> +
>>> +&uart1 {
>>> +     pinctrl-names = "default";
>>> +     pinctrl-0 = <&uart1_pins>;
>>> +     status = "disabled";
>>> +};
>>> +
>>> +&uart2 {
>>> +     pinctrl-names = "default";
>>> +     pinctrl-0 = <&uart2_pins>;
>>> +     status = "disabled";
>>> +};
>>> +
>>> +&uart3 {
>>> +     pinctrl-names = "default";
>>> +     pinctrl-0 = <&uart3_pins>;
>>> +     status = "disabled";
>>> +};
>>
>> I'm guessing that those UART are exposed on headers?
>>
>>> +
>>> +&usbphy {
>>> +     /* USB VBUS is always on */
>>
>> You can put the always on regulators (I'm guessing reg_vcc5v0 ?) here.
>
> AFAIK the regulator properties are optional the the USB PHY.
> So we probably don't need to add it. Hans (CC-ed) could explain
> his original intent?

I've made the regulators optional exactly for boards like these,
where there is no regulator. Likely the Vbus is simply wired
directly to the 5V DC-in jack. So IMHO adding something like
the fixed reg_vcc5v0 a supply here just makes the dt
harder to read.

Regards,

Hans



>
> Regards
> ChenYu
>
>>
>>> +     status = "okay";
>>> +};
>>
>> Thanks,
>> Maxime
>>
>> --
>> Maxime Ripard, Free Electrons
>> Embedded Linux and Kernel engineering
>> http://free-electrons.com

[linux-sunxi] Re: [PATCH 3/3] ARM: dts: sunxi: add support for Orange Pi Zero board

[Maxime Ripard]

On Mon, Nov 14, 2016 at 11:00:32AM +0100, Hans de Goede wrote:
> > > > +&usbphy {
> > > > +     /* USB VBUS is always on */
> > > 
> > > You can put the always on regulators (I'm guessing reg_vcc5v0 ?) here.
> > 
> > AFAIK the regulator properties are optional the the USB PHY.
> > So we probably don't need to add it. Hans (CC-ed) could explain
> > his original intent?
> 
> I've made the regulators optional exactly for boards like these,
> where there is no regulator. Likely the Vbus is simply wired
> directly to the 5V DC-in jack. So IMHO adding something like
> the fixed reg_vcc5v0 a supply here just makes the dt
> harder to read.

It also makes the regulator tree more complete and accurate because
you'd list all the devices that are needing those regulators. That
would also make it easier to deal with in the future.

But fair enough.
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161114/4cfb2c48/attachment.sig>

[linux-sunxi] [PATCH 1/3] ARM: sunxi: add support for H2+ SoC

[Hans de Goede]

Hi,

On 11-11-16 17:46, Icenowy Zheng wrote:
> Allwinner H2+ is a quad-core Cortex-A7 SoC.
>
> It is very like H3, that they share the same SoC ID (0x1680), and H3
> memory maps as well as drivers works well on the SoC.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>

I agree that given that the chip-id is 1680 for both
this does seem to be the same die as the H3, and given
that we do not have any datasheets, I agree that just
treating the H2+ as a H3 is best for now, we can always
change h2.dtsi to actually differentiate things later.

This entire series LGTM and is:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans

> ---
>  Documentation/arm/sunxi/README                  | 4 ++++
>  Documentation/devicetree/bindings/arm/sunxi.txt | 1 +
>  arch/arm/mach-sunxi/sunxi.c                     | 1 +
>  3 files changed, 6 insertions(+)
>
> diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
> index cd02433..1fe4d99c 100644
> --- a/Documentation/arm/sunxi/README
> +++ b/Documentation/arm/sunxi/README
> @@ -63,6 +63,10 @@ SunXi family
>          + User Manual
>            http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
>
> +      - Allwinner H2+ (sun8i)
> +        + No document available now, but is known to be working properly with
> +          H3 drivers and memory map.
> +
>        - Allwinner H3 (sun8i)
>          + Datasheet
>            http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
> diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
> index 3975d0a..0c0f277 100644
> --- a/Documentation/devicetree/bindings/arm/sunxi.txt
> +++ b/Documentation/devicetree/bindings/arm/sunxi.txt
> @@ -13,5 +13,6 @@ using one of the following compatible strings:
>    allwinner,sun8i-a33
>    allwinner,sun8i-a83t
>    allwinner,sun8i-h3
> +  allwinner,sun8i-h2plus
>    allwinner,sun9i-a80
>    nextthing,gr8
> diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
> index 2e2bde2..3647ad7 100644
> --- a/arch/arm/mach-sunxi/sunxi.c
> +++ b/arch/arm/mach-sunxi/sunxi.c
> @@ -63,6 +63,7 @@ static const char * const sun8i_board_dt_compat[] = {
>  	"allwinner,sun8i-a23",
>  	"allwinner,sun8i-a33",
>  	"allwinner,sun8i-a83t",
> +	"allwinner,sun8i-h2plus",
>  	"allwinner,sun8i-h3",
>  	NULL,
>  };
>

[PATCH 1/3] ARM: sunxi: add support for H2+ SoC

[Maxime Ripard]

Hi,

On Sat, Nov 12, 2016 at 12:46:52AM +0800, Icenowy Zheng wrote:
> Allwinner H2+ is a quad-core Cortex-A7 SoC.
> 
> It is very like H3, that they share the same SoC ID (0x1680), and H3
> memory maps as well as drivers works well on the SoC.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
>  Documentation/arm/sunxi/README                  | 4 ++++
>  Documentation/devicetree/bindings/arm/sunxi.txt | 1 +
>  arch/arm/mach-sunxi/sunxi.c                     | 1 +
>  3 files changed, 6 insertions(+)
> 
> diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
> index cd02433..1fe4d99c 100644
> --- a/Documentation/arm/sunxi/README
> +++ b/Documentation/arm/sunxi/README
> @@ -63,6 +63,10 @@ SunXi family
>          + User Manual
>            http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
>  
> +      - Allwinner H2+ (sun8i)
> +        + No document available now, but is known to be working properly with
> +          H3 drivers and memory map.
> +
>        - Allwinner H3 (sun8i)
>          + Datasheet
>            http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
> diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
> index 3975d0a..0c0f277 100644
> --- a/Documentation/devicetree/bindings/arm/sunxi.txt
> +++ b/Documentation/devicetree/bindings/arm/sunxi.txt
> @@ -13,5 +13,6 @@ using one of the following compatible strings:
>    allwinner,sun8i-a33
>    allwinner,sun8i-a83t
>    allwinner,sun8i-h3
> +  allwinner,sun8i-h2plus

That's a nitpick, but I'd prefer to have sun8i-h2-plus.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161114/085010ba/attachment.sig>