From mboxrd@z Thu Jan 1 00:00:00 1970 From: zql@glomationinc.com (Zhong Li) Date: Thu, 15 Nov 2012 11:56:52 -0500 Subject: Configure the USB device/host on sam9g25 module In-Reply-To: <50A51978.7040001@ronetix.at> References: <50A51978.7040001@ronetix.at> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org It is a hardware configuration problem. You must use a type-A mini USB cable. Martin Peevski wrote: > Hi, > > I'm working with sam9g25 module placed on sam9x5-ek. sam9g25 has 2 >host USB's and 1 device/host USB (on the micro USB of sam9x5-ek). Both >USB hosts accept mass storage devices and works correct. It was >impossible to do 2 things with the USB device/host (placed on the micro > >USB of sam9x5-ek): > > 1. Put in it mass storage device - the kernel want not to >enumerate it and give it an name (for example sda, sdb, ...). What I >must do in the config file of kernel to be recognized the inserted mass > >storage device? > > 2. Connect cable from the micro USB to any of the host USB's and >detect USB serial gadget. > >I tryed to make some configs for both problems in the kernel but it >don't works. Can you, please, help me solve these problems? > >_______________________________________________ >linux-arm-kernel mailing list >linux-arm-kernel at lists.infradead.org >http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -------------- next part -------------- An HTML attachment was scrubbed... URL: