From: hramrach@gmail.com (Michal Suchanek)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 11/13] dt: spi: sun4i: merge sun4i and sun6i binding doc
Date: 13 Jun 2016 17:46:52 -0000 [thread overview]
Message-ID: <cccbd6c3f0a194ec6eecd6627c4874da7b936f37.1465490774.git.hramrach@gmail.com> (raw)
In-Reply-To: <cover.1465490774.git.hramrach@gmail.com>
Signed-off-by: Michal Suchanek <hramrach@gmail.com>
---
.../devicetree/bindings/spi/spi-sun4i.txt | 21 ++++++++++---------
.../devicetree/bindings/spi/spi-sun6i.txt | 24 ----------------------
2 files changed, 11 insertions(+), 34 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/spi-sun6i.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt
index de827f5..329e543 100644
--- a/Documentation/devicetree/bindings/spi/spi-sun4i.txt
+++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt
@@ -1,7 +1,8 @@
-Allwinner A10 SPI controller
+Allwinner A10/A31 SPI controller
Required properties:
-- compatible: Should be "allwinner,sun4-a10-spi".
+- compatible: Should be one of "allwinner,sun4i-a10-spi" and
+ "allwinner,sun6i-a31-spi"
- reg: Should contain register location and length.
- interrupts: Should contain interrupt.
- clocks: phandle to the clocks feeding the SPI controller. Two are
@@ -9,16 +10,16 @@ Required properties:
- "ahb": the gated AHB parent clock
- "mod": the parent module clock
- clock-names: Must contain the clock names described just above
+- resets: (sun6i only) phandle to the reset controller asserting
+ this device in reset
Example:
-spi1: spi at 01c06000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c06000 0x1000>;
- interrupts = <11>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
+spi1: spi at 01c69000 {
+ compatible = "allwinner,sun6i-a31-spi";
+ reg = <0x01c69000 0x1000>;
+ interrupts = <0 66 4>;
+ clocks = <&ahb1_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
+ resets = <&ahb1_rst 21>;
};
diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
deleted file mode 100644
index 21de73d..0000000
--- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Allwinner A31 SPI controller
-
-Required properties:
-- compatible: Should be "allwinner,sun6i-a31-spi".
-- reg: Should contain register location and length.
-- interrupts: Should contain interrupt.
-- clocks: phandle to the clocks feeding the SPI controller. Two are
- needed:
- - "ahb": the gated AHB parent clock
- - "mod": the parent module clock
-- clock-names: Must contain the clock names described just above
-- resets: phandle to the reset controller asserting this device in
- reset
-
-Example:
-
-spi1: spi at 01c69000 {
- compatible = "allwinner,sun6i-a31-spi";
- reg = <0x01c69000 0x1000>;
- interrupts = <0 66 4>;
- clocks = <&ahb1_gates 21>, <&spi1_clk>;
- clock-names = "ahb", "mod";
- resets = <&ahb1_rst 21>;
-};
--
2.8.1
next prev parent reply other threads:[~2016-06-13 17:46 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-13 17:46 [PATCH v3 00/13] sunxi spi fixes Michal Suchanek
2016-06-13 17:46 ` [PATCH v3 03/13] spi: sun4i: fix FIFO limit Michal Suchanek
2016-06-13 19:56 ` Maxime Ripard
2016-06-13 17:46 ` [PATCH v3 01/13] spi: sunxi: set maximum and minimum speed of SPI master Michal Suchanek
2016-06-13 19:55 ` Maxime Ripard
2016-06-13 17:46 ` [PATCH v3 02/13] spi: sunxi: fix transfer timeout Michal Suchanek
2016-06-13 19:55 ` Maxime Ripard
2016-06-13 17:46 ` [PATCH v3 06/13] spi: sunxi: rename sun4i,sun6i -> sunxi Michal Suchanek
2016-06-13 17:46 ` [PATCH v3 05/13] spi: sun6i: update CS handling from spi-sun4i Michal Suchanek
2016-06-13 17:46 ` [PATCH v3 04/13] spi: sunxi: expose maximum transfer size limit Michal Suchanek
2016-06-13 19:56 ` Maxime Ripard
2016-06-13 17:46 ` [PATCH v3 09/13] spi: sunxi: use register map Michal Suchanek
2016-06-13 17:46 ` [PATCH v3 08/13] spi: sunxi: synchronize whitespace, comments, struct Michal Suchanek
2016-06-13 17:46 ` [PATCH v3 07/13] spi: sunxi: rename constants to match between sun4i and sun6i Michal Suchanek
2016-06-13 23:31 ` [linux-sunxi] " Julian Calaby
2016-06-14 4:43 ` Michal Suchanek
2016-06-13 17:46 ` Michal Suchanek [this message]
2016-06-13 23:45 ` [linux-sunxi] [PATCH v3 11/13] dt: spi: sun4i: merge sun4i and sun6i binding doc Julian Calaby
2016-06-14 4:40 ` Michal Suchanek
2016-06-14 4:48 ` Julian Calaby
2016-06-13 17:46 ` [PATCH v3 10/13] spi: sunxi: merge sun4i and sun6i SPI driver Michal Suchanek
2016-06-13 23:43 ` [linux-sunxi] " Julian Calaby
2016-06-14 4:34 ` Michal Suchanek
2016-06-14 4:47 ` Julian Calaby
2016-06-14 5:28 ` Michal Suchanek
2016-06-14 5:45 ` Julian Calaby
2016-06-14 6:35 ` Michal Suchanek
2016-06-14 11:20 ` Julian Calaby
2016-06-13 17:46 ` [PATCH v3 12/13] spi: sunxi: remove CONFIG_SPI_SUN6I Michal Suchanek
2016-06-13 17:46 ` [PATCH v3 13/13] spi: sun4i: add DMA support Michal
2016-06-13 19:57 ` [PATCH v3 00/13] sunxi spi fixes Maxime Ripard
2016-06-14 4:50 ` Michal Suchanek
2016-06-17 10:34 ` Michal Suchanek
2016-07-25 7:32 ` Maxime Ripard
2016-07-25 8:03 ` Michal Suchanek
2016-07-29 20:22 ` Maxime Ripard
2016-07-30 17:32 ` Michal Suchanek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cccbd6c3f0a194ec6eecd6627c4874da7b936f37.1465490774.git.hramrach@gmail.com \
--to=hramrach@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).