From mboxrd@z Thu Jan  1 00:00:00 1970
From: post@twien.net (post at twien.net)
Date: Thu, 23 Oct 2014 16:19:32 +0200
Subject: ARMADA 370 - Distributed Switch Architecture (dsa) - device tree
In-Reply-To: <20141023140557.GD25190@lunn.ch>
References: <f1e8d1ba750bfb63f84471d0ec7de988@twien.net>
 <20141013111904.GD14147@titan.lakedaemon.net>
 <20141023112002.228d8a17@free-electrons.com>
 <20141023121034.GJ17447@titan.lakedaemon.net>
 <3328a23fffe41f90f0660b26e36e412a@twien.net>
 <20141023140557.GD25190@lunn.ch>
Message-ID: <cd4546086529d799daeb67c7932cb250@twien.net>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

3.16.3
Tormod

On 2014-10-23 16:05, Andrew Lunn wrote:
> On Thu, Oct 23, 2014 at 02:57:45PM +0200, post at twien.net wrote:
>> Hello all,
>> It's progressing. Have had little time to work on it lately, but
>> have got the 6352 switch up and running except for port 6 (the one
>> with external PHY). It's currently commented out in my device tree
>> specification. Enabling port 6 in the .dts file causes the dsa setup
>> to fail (error -5).
> 
> What kernel version are you using?
> 
> I recently swapped to 3.18-rc1 and my DIR665 is no longer doing
> correct auto-negotiation. The interfaces come up 10/half duplex, and i
> need to restart autoneg with ethtool before i get full Gbps.  So it
> looks like there is something wrong with phys somewhere.
> 
>       Andrew