linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: chenzhou <chenzhou10@huawei.com>
To: Catalin Marinas <catalin.marinas@arm.com>,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: song.bao.hua@hisilicon.com, xiexiuqi@huawei.com,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, huawei.libin@huawei.com,
	akpm@linux-foundation.org, will@kernel.org, ardb@kernel.org,
	rppt@kernel.org
Subject: Re: [PATCH 2/2] arm64: mm: fix kdump broken with ZONE_DMA reintroduced
Date: Fri, 8 Jan 2021 09:09:46 +0800	[thread overview]
Message-ID: <cf1a0700-4cd4-4550-c0eb-645b60cc83b4@huawei.com> (raw)
In-Reply-To: <20210107142541.GA26159@gaia>



On 2021/1/7 22:25, Catalin Marinas wrote:
> On Sat, Dec 26, 2020 at 11:34:58AM +0100, Nicolas Saenz Julienne wrote:
>> On Sat, 2020-12-26 at 11:35 +0800, Chen Zhou wrote:
>>> If the memory reserved for crash dump kernel falled in ZONE_DMA32,
>>> the devices in crash dump kernel need to use ZONE_DMA will alloc fail.
>>>
>>> Fix this by reserving low memory in ZONE_DMA if CONFIG_ZONE_DMA is
>>> enabled, otherwise, reserving in ZONE_DMA32.
>>>
>>> Fixes: bff3b04460a8 ("arm64: mm: reserve CMA and crashkernel in ZONE_DMA32")
>> I'm not so sure this counts as a fix, if someone backports it it'll probably
>> break things as it depends on the series that dynamically sizes DMA zones.
>>
>>> Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
>>> ---
>> Why not doing the same with CMA? You'll probably have to move the
>> dma_contiguous_reserve() call into bootmem_init() so as to make sure that
>> arm64_dma_phys_limit is populated.
> Do we need the arm64_dma32_phys_limit at all? I can see the
> (arm64_dma_phys_limit ? : arm64_dma32_phys_limit) pattern in several
> places but I think we can just live with the arm64_dma_phys_limit.
Yes, arm64_dma_phys_limit is enough.
>
> Also, I don't think we need any early ARCH_LOW_ADDRESS_LIMIT. It's only
> used by memblock_alloc_low() and that's called from swiotlb_init()
> after arm64_dma_phys_limit was initialised.
>
> What about something like below (on top of you ARCH_LOW_ADDRESS_LIMIT
> fix but I can revert that)? I haven't tested it in all configurations
> yet.
>
> diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
> index 69ad25fbeae4..ca2cd75d3286 100644
> --- a/arch/arm64/include/asm/processor.h
> +++ b/arch/arm64/include/asm/processor.h
> @@ -94,8 +94,7 @@
>  #endif /* CONFIG_ARM64_FORCE_52BIT */
>  
>  extern phys_addr_t arm64_dma_phys_limit;
> -extern phys_addr_t arm64_dma32_phys_limit;
> -#define ARCH_LOW_ADDRESS_LIMIT	((arm64_dma_phys_limit ? : arm64_dma32_phys_limit) - 1)
> +#define ARCH_LOW_ADDRESS_LIMIT	(arm64_dma_phys_limit - 1)
>  
>  struct debug_info {
>  #ifdef CONFIG_HAVE_HW_BREAKPOINT
> diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
> index 7deddf56f7c3..596a94bf5ed6 100644
> --- a/arch/arm64/mm/init.c
> +++ b/arch/arm64/mm/init.c
> @@ -59,7 +59,6 @@ EXPORT_SYMBOL(memstart_addr);
>   * bit addressable memory area.
>   */
>  phys_addr_t arm64_dma_phys_limit __ro_after_init;
> -phys_addr_t arm64_dma32_phys_limit __ro_after_init;
>  
>  #ifdef CONFIG_KEXEC_CORE
>  /*
> @@ -84,7 +83,7 @@ static void __init reserve_crashkernel(void)
>  
>  	if (crash_base == 0) {
>  		/* Current arm64 boot protocol requires 2MB alignment */
> -		crash_base = memblock_find_in_range(0, arm64_dma32_phys_limit,
> +		crash_base = memblock_find_in_range(0, arm64_dma_phys_limit,
>  				crash_size, SZ_2M);
>  		if (crash_base == 0) {
>  			pr_warn("cannot allocate crashkernel (size:0x%llx)\n",
> @@ -196,6 +195,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
>  	unsigned long max_zone_pfns[MAX_NR_ZONES]  = {0};
>  	unsigned int __maybe_unused acpi_zone_dma_bits;
>  	unsigned int __maybe_unused dt_zone_dma_bits;
> +	phys_addr_t dma32_phys_limit = max_zone_phys(32);
>  
>  #ifdef CONFIG_ZONE_DMA
>  	acpi_zone_dma_bits = fls64(acpi_iort_dma_get_max_cpu_address());
> @@ -205,8 +205,12 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
>  	max_zone_pfns[ZONE_DMA] = PFN_DOWN(arm64_dma_phys_limit);
>  #endif
>  #ifdef CONFIG_ZONE_DMA32
> -	max_zone_pfns[ZONE_DMA32] = PFN_DOWN(arm64_dma32_phys_limit);
> +	max_zone_pfns[ZONE_DMA32] = PFN_DOWN(dma32_phys_limit);
> +	if (!arm64_dma_phys_limit)
> +		arm64_dma_phys_limit = dma32_phys_limit;
>  #endif
> +	if (!arm64_dma_phys_limit)
> +		arm64_dma_phys_limit = PHYS_MASK + 1;
>  	max_zone_pfns[ZONE_NORMAL] = max;
>  
>  	free_area_init(max_zone_pfns);
> @@ -394,16 +398,9 @@ void __init arm64_memblock_init(void)
>  
>  	early_init_fdt_scan_reserved_mem();
>  
> -	if (IS_ENABLED(CONFIG_ZONE_DMA32))
> -		arm64_dma32_phys_limit = max_zone_phys(32);
> -	else
> -		arm64_dma32_phys_limit = PHYS_MASK + 1;
> -
>  	reserve_elfcorehdr();
>  
>  	high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
> -
> -	dma_contiguous_reserve(arm64_dma32_phys_limit);
>  }
>  
>  void __init bootmem_init(void)
> @@ -438,6 +435,11 @@ void __init bootmem_init(void)
>  	sparse_init();
>  	zone_sizes_init(min, max);
>  
> +	/*
> +	 * Reserve the CMA area after arm64_dma_phys_limit was initialised.
> +	 */
> +	dma_contiguous_reserve(arm64_dma_phys_limit);
> +
>  	/*
>  	 * request_standard_resources() depends on crashkernel's memory being
>  	 * reserved, so do it here.
> @@ -455,7 +457,7 @@ void __init bootmem_init(void)
>  void __init mem_init(void)
>  {
>  	if (swiotlb_force == SWIOTLB_FORCE ||
> -	    max_pfn > PFN_DOWN(arm64_dma_phys_limit ? : arm64_dma32_phys_limit))
> +	    max_pfn > PFN_DOWN(arm64_dma_phys_limit))
>  		swiotlb_init(1);
>  	else
>  		swiotlb_force = SWIOTLB_NO_FORCE;
> .
>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-01-08  1:13 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-26  3:35 [PATCH 0/2] arm64: mm: fix kdump broken with ZONE_DMA reintroduced Chen Zhou
2020-12-26  3:35 ` [PATCH 1/2] arm64: mm: update the comments about ZONE_DMA Chen Zhou
2020-12-26 10:35   ` Nicolas Saenz Julienne
2020-12-26  3:35 ` [PATCH 2/2] arm64: mm: fix kdump broken with ZONE_DMA reintroduced Chen Zhou
2020-12-26 10:34   ` Nicolas Saenz Julienne
2020-12-28  7:32     ` chenzhou
2021-01-07 18:34       ` Catalin Marinas
2021-01-07 14:25     ` Catalin Marinas
2021-01-08  1:09       ` chenzhou [this message]
2021-01-20 12:40 ` [PATCH 0/2] " Will Deacon
2021-01-20 13:07   ` Catalin Marinas
2021-01-21  2:37     ` chenzhou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cf1a0700-4cd4-4550-c0eb-645b60cc83b4@huawei.com \
    --to=chenzhou10@huawei.com \
    --cc=akpm@linux-foundation.org \
    --cc=ardb@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=huawei.libin@huawei.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nsaenzjulienne@suse.de \
    --cc=rppt@kernel.org \
    --cc=song.bao.hua@hisilicon.com \
    --cc=will@kernel.org \
    --cc=xiexiuqi@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).