From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/21] at91 first cleanup series for 3.4
Date: Thu, 23 Feb 2012 15:25:44 +0100 [thread overview]
Message-ID: <cover.1330006537.git.nicolas.ferre@atmel.com> (raw)
It is the third revision of this series of cleanup. It includes
new enhancements recommended by Ryan Mallon and Russell King.
This series removes the at91_sys_read/write() functions that where
used for all System Controller devices. The static offsets that were
used prevented us from compiling several AT91 SoC support in a single
zImage.
The other cleanup is the move of some early console initialization. In
addition, some Makefile.boot modifications have been performed to be
able to make .dtb files.
All this goes on top of current material that is already in arm-soc
git tree (merge of all at91/* branches).
Jean-Christophe PLAGNIOL-VILLARD (18):
ARM: at91: factorise duplicated at91sam9 idle
ARM: at91/at91x40: remove use of at91_sys_read/write
ARM: at91: make matrix register base soc independent
ARM: at91: make ST (System Timer) soc independent
ARM: at91/pm_slowclock: rename register to named define
ARM: at91/pm_slowclock: function slow_clock() accepts parameters
ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h
ARM: at91: make sdram/ddr register base soc independent
ARM: at91/pm_slowclock: add runtime detection of memory contoller
ARM: at91/PMC: make register base soc independent
ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use
ARM: at91:rtc/rtc-at91sam9: ioremap register bank
ARM: at91/rtc-at91sam9: pass the GPBR to use via resources
ARM: at91: finally drop at91_sys_read/write
ARM: at91: merge SRAM Memory banks thanks to mirroring
Atmel: move console default platform_device to serial driver
ARM: at91/board-dt: drop default console
ARM: at91: properly sort dtb files in Makefile.boot
Nicolas Ferre (3):
ARM: at91/ST: remove not needed casts
ARM: at91/PMC: move assignment out of printf
ARM: at91: add at91sam9g25ek.dts in Makefile.boot
arch/arm/mach-at91/Makefile.boot | 8 +-
arch/arm/mach-at91/at91rm9200.c | 8 +-
arch/arm/mach-at91/at91rm9200_devices.c | 14 +-
arch/arm/mach-at91/at91rm9200_time.c | 37 ++-
arch/arm/mach-at91/at91sam9260.c | 23 +-
arch/arm/mach-at91/at91sam9260_devices.c | 38 +++-
arch/arm/mach-at91/at91sam9261.c | 10 +-
arch/arm/mach-at91/at91sam9261_devices.c | 31 ++-
arch/arm/mach-at91/at91sam9263.c | 11 +-
arch/arm/mach-at91/at91sam9263_devices.c | 59 ++++-
arch/arm/mach-at91/at91sam9_alt_reset.S | 12 +-
arch/arm/mach-at91/at91sam9g45.c | 11 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 31 ++-
arch/arm/mach-at91/at91sam9g45_reset.S | 12 +-
arch/arm/mach-at91/at91sam9rl.c | 10 +-
arch/arm/mach-at91/at91sam9rl_devices.c | 31 ++-
arch/arm/mach-at91/at91sam9x5.c | 5 +-
arch/arm/mach-at91/at91x40.c | 2 +-
arch/arm/mach-at91/at91x40_time.c | 28 ++-
arch/arm/mach-at91/board-cpu9krea.c | 5 +-
arch/arm/mach-at91/board-cpuat91.c | 1 +
arch/arm/mach-at91/board-dt.c | 6 -
arch/arm/mach-at91/board-eco920.c | 5 +-
arch/arm/mach-at91/board-kb9202.c | 1 +
arch/arm/mach-at91/board-picotux200.c | 1 +
arch/arm/mach-at91/board-rm9200dk.c | 1 +
arch/arm/mach-at91/board-rm9200ek.c | 1 +
arch/arm/mach-at91/board-yl-9200.c | 3 +-
arch/arm/mach-at91/clock.c | 88 ++++---
arch/arm/mach-at91/generic.h | 10 +
arch/arm/mach-at91/include/mach/at91_matrix.h | 23 ++
arch/arm/mach-at91/include/mach/at91_pmc.h | 56 +++--
arch/arm/mach-at91/include/mach/at91_ramc.h | 32 +++
arch/arm/mach-at91/include/mach/at91_st.h | 32 ++-
arch/arm/mach-at91/include/mach/at91rm9200.h | 10 +-
arch/arm/mach-at91/include/mach/at91rm9200_mc.h | 58 +----
.../arm/mach-at91/include/mach/at91rm9200_sdramc.h | 63 +++++
arch/arm/mach-at91/include/mach/at91sam9260.h | 14 +-
.../mach-at91/include/mach/at91sam9260_matrix.h | 36 ++--
arch/arm/mach-at91/include/mach/at91sam9261.h | 10 +-
.../mach-at91/include/mach/at91sam9261_matrix.h | 18 +-
arch/arm/mach-at91/include/mach/at91sam9263.h | 12 +-
.../mach-at91/include/mach/at91sam9263_matrix.h | 74 +++---
arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h | 6 -
arch/arm/mach-at91/include/mach/at91sam9_sdramc.h | 6 -
arch/arm/mach-at91/include/mach/at91sam9g45.h | 12 +-
.../mach-at91/include/mach/at91sam9g45_matrix.h | 84 +++---
arch/arm/mach-at91/include/mach/at91sam9rl.h | 7 +-
.../arm/mach-at91/include/mach/at91sam9rl_matrix.h | 42 ++--
arch/arm/mach-at91/include/mach/at91sam9x5.h | 5 +-
arch/arm/mach-at91/include/mach/at91x40.h | 18 +-
arch/arm/mach-at91/include/mach/hardware.h | 3 +-
arch/arm/mach-at91/include/mach/io.h | 18 --
arch/arm/mach-at91/pm.c | 35 ++-
arch/arm/mach-at91/pm.h | 11 +-
arch/arm/mach-at91/pm_slowclock.S | 271 ++++++++++----------
arch/arm/mach-at91/setup.c | 9 +
arch/avr32/mach-at32ap/at32ap700x.c | 2 -
drivers/pcmcia/at91_cf.c | 5 +-
drivers/rtc/rtc-at91sam9.c | 98 +++-----
drivers/tty/serial/atmel_serial.c | 2 +
drivers/usb/gadget/at91_udc.c | 9 +-
drivers/usb/gadget/atmel_usba_udc.c | 6 +-
drivers/watchdog/at91rm9200_wdt.c | 8 +-
64 files changed, 920 insertions(+), 678 deletions(-)
create mode 100644 arch/arm/mach-at91/include/mach/at91_matrix.h
create mode 100644 arch/arm/mach-at91/include/mach/at91_ramc.h
create mode 100644 arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
--
1.7.9
next reply other threads:[~2012-02-23 14:25 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-23 14:25 Nicolas Ferre [this message]
2012-02-23 14:25 ` [PATCH v3 01/21] ARM: at91: factorise duplicated at91sam9 idle Nicolas Ferre
2012-02-23 14:25 ` [PATCH v3 02/21] ARM: at91/at91x40: remove use of at91_sys_read/write Nicolas Ferre
2012-02-23 14:25 ` [PATCH v3 03/21] ARM: at91: make matrix register base soc independent Nicolas Ferre
2012-02-23 14:25 ` [PATCH v3 04/21] ARM: at91: make ST (System Timer) " Nicolas Ferre
2012-02-23 14:25 ` [PATCH v3 05/21] ARM: at91/ST: remove not needed casts Nicolas Ferre
2012-02-23 14:25 ` [PATCH v3 06/21] ARM: at91/pm_slowclock: rename register to named define Nicolas Ferre
2012-02-23 14:25 ` [PATCH v3 07/21] ARM: at91/pm_slowclock: function slow_clock() accepts parameters Nicolas Ferre
2012-02-23 14:25 ` [PATCH v3 08/21] ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h Nicolas Ferre
2012-02-23 14:25 ` [PATCH v3 09/21] ARM: at91: make sdram/ddr register base soc independent Nicolas Ferre
2012-02-23 14:25 ` [PATCH v3 10/21] ARM: at91/pm_slowclock: add runtime detection of memory contoller Nicolas Ferre
2012-02-23 14:25 ` [PATCH v3 11/21] ARM: at91/PMC: move assignment out of printf Nicolas Ferre
2012-02-23 21:50 ` Ryan Mallon
2012-02-23 14:25 ` [PATCH v3 12/21] ARM: at91/PMC: make register base soc independent Nicolas Ferre
2012-02-23 14:25 ` [PATCH v3 13/21] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use Nicolas Ferre
2012-02-23 14:25 ` [PATCH v3 14/21] ARM: at91:rtc/rtc-at91sam9: ioremap register bank Nicolas Ferre
2012-02-23 14:25 ` [PATCH v3 15/21] ARM: at91/rtc-at91sam9: pass the GPBR to use via resources Nicolas Ferre
2012-02-23 14:26 ` [PATCH v3 16/21] ARM: at91: finally drop at91_sys_read/write Nicolas Ferre
2012-02-23 21:48 ` Ryan Mallon
2012-02-23 14:26 ` [PATCH v3 17/21] ARM: at91: merge SRAM Memory banks thanks to mirroring Nicolas Ferre
2012-02-23 21:47 ` Ryan Mallon
2012-02-24 16:54 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-26 22:45 ` Ryan Mallon
2012-02-23 14:26 ` [PATCH v3 18/21] Atmel: move console default platform_device to serial driver Nicolas Ferre
2012-02-23 14:26 ` [PATCH v3 19/21] ARM: at91/board-dt: drop default console Nicolas Ferre
2012-02-23 14:26 ` [PATCH v3 20/21] ARM: at91: add at91sam9g25ek.dts in Makefile.boot Nicolas Ferre
2012-02-23 14:26 ` [PATCH v3 21/21] ARM: at91: properly sort dtb files " Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1330006537.git.nicolas.ferre@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).