From mboxrd@z Thu Jan 1 00:00:00 1970 From: jason@lakedaemon.net (Jason Cooper) Date: Fri, 2 Mar 2012 17:50:17 +0000 Subject: [PATCH 0/5 v2] ARM: kirkwood: fdt: convert kirkwood init funcs to fdt In-Reply-To: Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This series begins the process of converting all of the drivers initialized from kirkwood_init() to devicetree. The first patch converts an off-SoC driver (spi) to device tree and moves flash partition definitions to the device tree. This was previously it's own submission, but I've included it here since I want this series to match the subsequent pull request against arm-soc/kirkwood/board. The second patch cleans up kirkwood_init() by moving a flag setting to it's appropriate location. This will help later when converting the audio driver. Next, I pull the functionality of kirkwood_init() into kirkwood_dt_init() in board-dt.c This way, as drivers are converted, their init calls can be removed from kirkwood_dt_init() and non-fdt users won't be affected (they call kirkwood_init()). Last, I converted the two easiest drivers, rtc and wdt. The xor and crypto drivers remain for a later patch series. Jason Cooper (5): ARM: kirkwood: covert orion-spi to fdt. ARM: kirkwood: move var setting to correct location. ARM: kirkwood: fdt: absorb kirkwood_init() ARM: kirkwood: convert rtc-mv to fdt. ARM: kirkwood: convert orion-wdt to fdt. arch/arm/boot/dts/kirkwood-dreamplug.dts | 34 +++++++++++++++ arch/arm/boot/dts/kirkwood.dtsi | 12 +++++ arch/arm/mach-kirkwood/board-dt.c | 67 +++++++++++------------------ arch/arm/mach-kirkwood/common.c | 21 +++++++-- arch/arm/mach-kirkwood/common.h | 6 +++ drivers/rtc/rtc-mv.c | 7 +++ drivers/spi/spi-orion.c | 37 +++++++++++++++-- drivers/watchdog/orion_wdt.c | 48 ++++++++++++++++----- 8 files changed, 170 insertions(+), 62 deletions(-) -- 1.7.3.4