From: jsarha@ti.com (Jyri Sarha)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RFC 0/9] Beaglebone-Black HDMI audio
Date: Tue, 19 Nov 2013 14:12:20 +0200 [thread overview]
Message-ID: <cover.1384862950.git.jsarha@ti.com> (raw)
This set of patches implements PCM HDMI audio driver for
Beaglebone-Black HDMI output. The patches have been rebased
on top of:
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound topic/davinci
There is couple of earlier RFC versions of the clk patch floating
around, but the one here is the latest version.
I'll send the associated dts changes shortly as a separate patch.
Best regards,
Jyri
Jyri Sarha (9):
clk: add gpio controlled clock
ASoC: davinci-evm: Add named clock reference to DT bindings
ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S
bus
ASoC: hdmi-codec: Add devicetree binding with documentation
ASoC: hdmi-codec: Add SNDRV_PCM_FMTBIT_32_LE playback format
ASoC: davinci: HDMI audio build for AM33XX and TDA998x
drm/tilcdc: Add I2C HDMI audio config for tda998x
ARM: OMAP2+: omap2plus_defconfig: Enable tilcdc and TDA998X HDMI
support
ARM: OMAP2+: omap2plus_defconfig: Enable BeagleBone Black HDMI audio
support
.../devicetree/bindings/clock/gpio-clock.txt | 21 ++
.../bindings/sound/davinci-evm-audio.txt | 12 +-
Documentation/devicetree/bindings/sound/hdmi.txt | 17 ++
arch/arm/configs/omap2plus_defconfig | 5 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-gpio.c | 209 ++++++++++++++++++
drivers/gpu/drm/tilcdc/tilcdc_slave.c | 24 ++-
include/linux/clk-provider.h | 25 +++
sound/soc/codecs/hdmi.c | 12 +-
sound/soc/davinci/Kconfig | 12 ++
sound/soc/davinci/Makefile | 1 +
sound/soc/davinci/davinci-evm.c | 227 +++++++++++++++++++-
12 files changed, 558 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/gpio-clock.txt
create mode 100644 Documentation/devicetree/bindings/sound/hdmi.txt
create mode 100644 drivers/clk/clk-gpio.c
--
1.7.9.5
next reply other threads:[~2013-11-19 12:12 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-19 12:12 Jyri Sarha [this message]
2013-11-19 12:12 ` [PATCH RFC 1/9] clk: add gpio controlled clock Jyri Sarha
2013-11-19 12:12 ` [PATCH RFC 2/9] ASoC: davinci-evm: Add named clock reference to DT bindings Jyri Sarha
2013-11-19 18:18 ` Mark Brown
2013-11-19 12:12 ` [PATCH RFC 3/9] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus Jyri Sarha
2013-11-19 15:07 ` Thomas Petazzoni
2013-11-19 12:12 ` [PATCH RFC 4/9] ASoC: hdmi-codec: Add devicetree binding with documentation Jyri Sarha
2013-11-19 17:50 ` Mark Brown
2013-11-20 9:23 ` Jean-Francois Moine
2013-11-20 10:09 ` Mark Brown
2013-11-20 12:34 ` Jean-Francois Moine
2013-11-20 13:33 ` Mark Brown
2013-11-19 12:12 ` [PATCH RFC 5/9] ASoC: hdmi-codec: Add SNDRV_PCM_FMTBIT_32_LE playback format Jyri Sarha
2013-11-19 18:21 ` Mark Brown
2013-11-19 12:12 ` [PATCH RFC 6/9] ASoC: davinci: HDMI audio build for AM33XX and TDA998x Jyri Sarha
2013-11-19 12:12 ` [PATCH RFC 7/9] drm/tilcdc: Add I2C HDMI audio config for tda998x Jyri Sarha
2013-11-19 12:12 ` [PATCH RFC 8/9] ARM: OMAP2+: omap2plus_defconfig: Enable tilcdc and TDA998X HDMI support Jyri Sarha
2013-11-19 12:12 ` [PATCH RFC 9/9] ARM: OMAP2+: omap2plus_defconfig: Enable BeagleBone Black HDMI audio support Jyri Sarha
2013-11-19 12:21 ` [PATCH RFC] DTS Changes for Beaglebone-Black HDMI audio Jyri Sarha
2013-11-19 12:21 ` [PATCH RFC] ARM/dts: am335x-boneblack: Add HDMI audio support Jyri Sarha
2013-11-19 13:02 ` Benoit Cousson
2013-11-19 13:29 ` Jyri Sarha
2013-12-20 10:36 ` [PATCH RFC v2 REPOST 0/8] Beaglebone-Black HDMI audio Jyri Sarha
2013-12-20 10:37 ` [PATCH RFC v2 REPOST 1/8] clk: add gpio controlled clock Jyri Sarha
2013-12-20 10:38 ` [PATCH RFC v2 REPOST 2/8] ASoC: davinci-evm: Add named clock reference to DT bindings Jyri Sarha
2013-12-31 13:16 ` Mark Brown
2014-01-15 11:12 ` Jyri Sarha
2013-12-20 10:39 ` [PATCH RFC v2 REPOST 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus Jyri Sarha
2013-12-31 13:25 ` Mark Brown
2014-01-15 11:27 ` Jyri Sarha
2014-01-15 13:48 ` [alsa-devel] " Anssi Hannula
2014-01-15 16:28 ` Jyri Sarha
2014-01-15 15:51 ` Jean-Francois Moine
2014-01-22 9:20 ` Jyri Sarha
2014-01-22 10:19 ` Jean-Francois Moine
2014-01-22 10:46 ` Jean-Francois Moine
2014-01-24 12:57 ` Jyri Sarha
2014-01-24 16:54 ` Jean-Francois Moine
2014-01-21 19:15 ` Mark Brown
2014-01-24 13:01 ` Jyri Sarha
2013-12-20 10:40 ` [PATCH RFC v2 REPOST 4/8] ASoC: hdmi-codec: Add devicetree binding with documentation Jyri Sarha
2013-12-31 13:26 ` Mark Brown
2013-12-20 10:40 ` [PATCH RFC v2 REPOST 5/8] ASoC: davinci: HDMI audio build for AM33XX and TDA998x Jyri Sarha
2013-12-20 10:41 ` [PATCH RFC v2 REPOST 6/8] drm/tilcdc: Add I2C HDMI audio config for tda998x Jyri Sarha
2013-12-20 10:42 ` [PATCH RFC v2 REPOST 7/8] ARM: OMAP2+: omap2plus_defconfig: Enable tilcdc and TDA998X HDMI support Jyri Sarha
2013-12-20 10:43 ` [PATCH RFC v2 REPOST 8/8] ARM: OMAP2+: omap2plus_defconfig: Enable BeagleBone Black HDMI audio support Jyri Sarha
2013-12-20 11:30 ` [alsa-devel] [PATCH RFC v2 REPOST 0/8] Beaglebone-Black HDMI audio Mark Brown
2013-12-20 11:51 ` Jyri Sarha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1384862950.git.jsarha@ti.com \
--to=jsarha@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).