[GIT PULL v2 00/33] Renesas ARM based SoC updates for v3.14

[GIT PULL v2 00/33] Renesas ARM based SoC updates for v3.14

[Simon Horman]

Hi Kevin, Hi Olof, Hi Arnd,

please consider these Renesas ARM based SoC updates for v3.14.

As discussed elsewhere, this pull-request also includes defconfig changes
related to renaming ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY. These are also
to avoid build regressions when using defconfigs

As this pull request is based on v3.12, which does not include
genmai_defconfig, it has not been updated. Rather, I have queued up a patch
in my defconfig to switch it to use ARCH_SHMOBILE_LEGACY.  This does
involve breaking that defconfig. However as it is new and not in
wide-spread use it seems better to live with that temporary breakage than
to have soc depend on defconfig (as was the case in the previous version of
this pull request).


The following changes since commit 6ce4eac1f600b34f2f7f58f9cd8f0503d79e42ae:

  Linux 3.13-rc1 (2013-11-22 11:30:55 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc-for-v3.14

for you to fetch changes up to fee05eb3d2ce4813b5e9a70ab888d2bc0047f4e1:

  ARM: shmobile: r8a7779: add HSPI clock support for DT (2013-12-10 17:20:15 +0900)

----------------------------------------------------------------
Renesas ARM based SoC updates for v3.14

* Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY

* r8a7791 SoC (R-Car M2)
  - Add thermal platform device
  - Add DU and LVDS clocks
  - GPIO platform device support
  - PFC platform device support
  - Select IRQC

* r8a7790 SoC (R-Car H2)
  - Tidyup clock table order
  - Fixup I2C clock source
  - Correct EXTAL divider settings
  - Add clocks for thermal devices and SSI

* r8a7779 SoC (R-Car H1)
  - Add I2C clock for DT

* r8a7778 SoC (R-Car M1)
  - Add HSPI clocks for DT
  - Add I2C clock for DT
  - Add HPBIFx DMAEngine support

* r8a7740 SoC (R-Mobile A1)
  - Add FSI clocks for DT

* emev2 SoC (Emma Mobile)
  - Move to Multi-platform
  - Remove legacy board code

* r7s72100 SoC (RZ/A1H)
  - Select GPIO

* r8a73a4 SoC (R-Mobile APE6)
  - Don't used named IRC for DMAEngine

----------------------------------------------------------------
Hiep Cao Minh (1):
      ARM: shmobile: r8a7790: add QSPI support

Kuninori Morimoto (13):
      ARM: shmobile: r8a7778: add I2C clock for DT
      ARM: shmobile: r8a7779: add I2C clock for DT
      ARM: shmobile: r8a73a4: don't use named irq for DMAEngine
      ARM: shmobile: r8a7778: add MMCIF clock support for DT
      ARM: shmobile: r8a7778: add SDHI clock support for DT
      ARM: shmobile: r8a7779: add SDHI clock support for DT
      ARM: shmobile: r8a7778: add HSPI clock support for DT
      ARM: shmobile: r8a7790: care EXTAL divider settings
      ARM: shmobile: r8a7790: fixup I2C clock source
      ARM: shmobile: r8a7790: tidyup clock table order
      ARM: shmobile: r8a7778: add HPBIFx DMAEngine support
      ARM: shmobile: r8a7790: add SSI MSTP clocks
      ARM: shmobile: r8a7740: add FSI clock support for DT

Laurent Pinchart (2):
      ARM: shmobile: r8a7791: Add DU and LVDS clocks
      ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY

Magnus Damm (14):
      ARM: shmobile: Select IRQC in case of the r8a7791 SoC
      ARM: shmobile: r8a7791 PFC platform device support
      ARM: shmobile: Select GPIO in case of the r8a7791 SoC
      ARM: shmobile: r8a7791 GPIO platform device support
      ARM: shmobile: Select GPIO in case of the r7s72100 SoC
      ARM: shmobile: Enable MTU2 on r7s72100
      ARM: shmobile: Add shared EMEV2 code for ->init_machine()
      ARM: shmobile: Use ->init_late() in shared EMEV2 case
      ARM: shmobile: Remove legacy KZM9D board code
      ARM: shmobile: Remove legacy platform devices from EMEV2 SoC code
      ARM: shmobile: Select USE_OF on EMEV2
      ARM: shmobile: Add r8a7790 clocks for thermal devices
      ARM: shmobile: Add r8a7791 thermal platform device
      ARM: shmobile: Add r8a7791 clocks for thermal devices

Simon Horman (2):
      ARM: shmobile: Select AUTO_ZRELADDR for EMEV2
      ARM: shmobile: r8a7779: add HSPI clock support for DT

Valentine Barshak (1):
      ARM: shmobile: r8a7790: Add USBHS clock support

 arch/arm/Kconfig                              |  14 ++-
 arch/arm/Makefile                             |   1 -
 arch/arm/boot/compressed/Makefile             |   2 +-
 arch/arm/boot/dts/Makefile                    |   2 +-
 arch/arm/configs/ape6evm_defconfig            |   2 +-
 arch/arm/configs/armadillo800eva_defconfig    |   2 +-
 arch/arm/configs/bockw_defconfig              |   2 +-
 arch/arm/configs/koelsch_defconfig            |   2 +-
 arch/arm/configs/kzm9d_defconfig              |   2 +-
 arch/arm/configs/kzm9g_defconfig              |   2 +-
 arch/arm/configs/lager_defconfig              |   2 +-
 arch/arm/configs/mackerel_defconfig           |   2 +-
 arch/arm/configs/marzen_defconfig             |   2 +-
 arch/arm/mach-shmobile/Kconfig                |  19 +--
 arch/arm/mach-shmobile/Makefile               |   1 -
 arch/arm/mach-shmobile/Makefile.boot          |   1 -
 arch/arm/mach-shmobile/board-kzm9d.c          |  92 ---------------
 arch/arm/mach-shmobile/clock-r7s72100.c       |   1 +
 arch/arm/mach-shmobile/clock-r8a7740.c        |   1 +
 arch/arm/mach-shmobile/clock-r8a7778.c        |  11 ++
 arch/arm/mach-shmobile/clock-r8a7779.c        |  11 ++
 arch/arm/mach-shmobile/clock-r8a7790.c        |  58 +++++++--
 arch/arm/mach-shmobile/clock-r8a7791.c        |  14 ++-
 arch/arm/mach-shmobile/include/mach/emev2.h   |   5 -
 arch/arm/mach-shmobile/include/mach/r8a7778.h |  18 +++
 arch/arm/mach-shmobile/include/mach/r8a7791.h |   1 +
 arch/arm/mach-shmobile/setup-emev2.c          | 163 ++------------------------
 arch/arm/mach-shmobile/setup-r7s72100.c       |  22 ++++
 arch/arm/mach-shmobile/setup-r8a73a4.c        |   2 +-
 arch/arm/mach-shmobile/setup-r8a7778.c        |  51 ++++++++
 arch/arm/mach-shmobile/setup-r8a7791.c        |  65 ++++++++++
 drivers/Makefile                              |   2 +-
 32 files changed, 285 insertions(+), 290 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-kzm9d.c

[PATCH 01/33] ARM: shmobile: r8a7778: add I2C clock for DT

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7778.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index fb6af83..a77089f 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -183,9 +183,13 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
 	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
+	CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */
 	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
+	CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */
 	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
+	CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */
 	CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
+	CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
 	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
-- 
1.8.4

[PATCH 02/33] ARM: shmobile: r8a7779: add I2C clock for DT

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

10e8d4f6dddb0f9dc408c2f2bde8399b243a42ca
(ARM: mach-shmobile: r8a7779: Minimal setup using DT)
added I2C driver for DT, but it didn't add clock.
This patch adds missing clock for I2C

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 1f7080f..badb8b7 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -184,9 +184,13 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
 	CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP016]), /* TMU02 */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
+	CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */
 	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
+	CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */
 	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
+	CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */
 	CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
+	CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
 	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
-- 
1.8.4

[PATCH 10/33] ARM: shmobile: r8a7778: add SDHI clock support for DT

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7778.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index e043715..011564f 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -175,8 +175,11 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */
 	CLKDEV_DEV_ID("ffe4e000.mmcif", &mstp_clks[MSTP331]), /* MMC */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
+	CLKDEV_DEV_ID("ffe4c000.sdhi", &mstp_clks[MSTP323]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
+	CLKDEV_DEV_ID("ffe4d000.sdhi", &mstp_clks[MSTP322]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
+	CLKDEV_DEV_ID("ffe4f000.sdhi", &mstp_clks[MSTP321]), /* SDHI2 */
 	CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
 	CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
 	CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
-- 
1.8.4

[PATCH 03/33] ARM: shmobile: Select IRQC in case of the r8a7791 SoC

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

The r8a7791 contains IRQC hardware so make sure
the driver gets built by selecting RENESAS_IRQC.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index a4a4b75..ff7c4ce 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -100,6 +100,7 @@ config ARCH_R8A7791
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
+	select RENESAS_IRQC
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
-- 
1.8.4

[PATCH 11/33] ARM: shmobile: r8a7779: add SDHI clock support for DT

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index badb8b7..5c83259 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -201,9 +201,13 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
 	CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
+	CLKDEV_DEV_ID("ffe4c000.sdhi", &mstp_clks[MSTP323]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
+	CLKDEV_DEV_ID("ffe4d000.sdhi", &mstp_clks[MSTP322]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
+	CLKDEV_DEV_ID("ffe4e000.sdhi", &mstp_clks[MSTP321]), /* SDHI2 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */
+	CLKDEV_DEV_ID("ffe4f000.sdhi", &mstp_clks[MSTP320]), /* SDHI3 */
 	CLKDEV_DEV_ID("rcar-du-r8a7779", &mstp_clks[MSTP103]), /* DU */
 };
 
-- 
1.8.4

[PATCH 04/33] ARM: shmobile: r8a7791 PFC platform device support

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Add a platform device for the r8a7791 PFC device.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7791.h |  1 +
 arch/arm/mach-shmobile/setup-r8a7791.c        | 13 +++++++++++++
 2 files changed, 14 insertions(+)

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h
index 051ead3..200fa69 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7791.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h
@@ -4,6 +4,7 @@
 void r8a7791_add_standard_devices(void);
 void r8a7791_add_dt_devices(void);
 void r8a7791_clock_init(void);
+void r8a7791_pinmux_init(void);
 void r8a7791_init_early(void);
 extern struct smp_operations r8a7791_smp_ops;
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index d9393d6..84cad8c 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -31,6 +31,19 @@
 #include <mach/rcar-gen2.h>
 #include <asm/mach/arch.h>
 
+static const struct resource pfc_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe6060000, 0x250),
+};
+
+#define r8a7791_register_pfc()						\
+	platform_device_register_simple("pfc-r8a7791", -1, pfc_resources, \
+					ARRAY_SIZE(pfc_resources))
+
+void __init r8a7791_pinmux_init(void)
+{
+	r8a7791_register_pfc();
+}
+
 #define SCIF_COMMON(scif_type, baseaddr, irq)			\
 	.type		= scif_type,				\
 	.mapbase	= baseaddr,				\
-- 
1.8.4

[PATCH 12/33] ARM: shmobile: r8a7790: Add USBHS clock support

[Simon Horman]

From: Valentine Barshak <valentine.barshak@cogentembedded.com>

This adds USBHS clock support.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7790.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index a64f965..161d44e 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -186,6 +186,7 @@ enum {
 	MSTP813,
 	MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
 	MSTP717, MSTP716,
+	MSTP704,
 	MSTP522,
 	MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
 	MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,
@@ -208,6 +209,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
 	[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
 	[MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
+	[MSTP704] = SH_CLK_MSTP32(&mp_clk, SMSTPCR7, 4, 0), /* HSUSB */
 	[MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
 	[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */
 	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */
@@ -296,6 +298,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
+	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP704]),
+	CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]),
 };
 
 #define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
-- 
1.8.4

[PATCH 05/33] ARM: shmobile: Select GPIO in case of the r8a7791 SoC

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Make it possible to build GPIO on r8a7791.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index ff7c4ce..4e1cc76 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -97,6 +97,7 @@ config ARCH_R8A7790
 
 config ARCH_R8A7791
 	bool "R-Car M2 (R8A77910)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
-- 
1.8.4

[PATCH 13/33] ARM: shmobile: r8a7790: add QSPI support

[Simon Horman]

From: Hiep Cao Minh <cm-hiep@jinso.co.jp>

Adds support for QSPI on the r8a7790.

Signed-off-by: Hiep Cao Minh <cm-hiep@jinso.co.jp>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7790.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 161d44e..5269640 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -183,6 +183,7 @@ static struct clk div6_clks[DIV6_NR] = {
 /* MSTP */
 enum {
 	MSTP931, MSTP930, MSTP929, MSTP928,
+	MSTP917,
 	MSTP813,
 	MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
 	MSTP717, MSTP716,
@@ -199,6 +200,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP930] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 30, 0), /* I2C1 */
 	[MSTP929] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 29, 0), /* I2C2 */
 	[MSTP928] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 28, 0), /* I2C3 */
+	[MSTP917] = SH_CLK_MSTP32(&qspi_clk, SMSTPCR9, 17, 0), /* QSPI */
 	[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
 	[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
 	[MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */
@@ -298,6 +300,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
+	CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
 	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP704]),
 	CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]),
 };
-- 
1.8.4

[PATCH 14/33] ARM: shmobile: Enable MTU2 on r7s72100

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Add MTU2 as r7s72100 system timer.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r7s72100.c |  1 +
 arch/arm/mach-shmobile/setup-r7s72100.c | 22 ++++++++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
index 4aba20c..1c9d261 100644
--- a/arch/arm/mach-shmobile/clock-r7s72100.c
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -178,6 +178,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
+	CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]),
 };
 
 void __init r7s72100_clock_init(void)
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index d4eb509..55f0b9c 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r7s72100.h>
@@ -58,6 +59,26 @@ static inline void r7s72100_register_scif(int idx)
 				      sizeof(struct plat_sci_port));
 }
 
+
+static struct sh_timer_config mtu2_0_platform_data __initdata = {
+	.name = "MTU2_0",
+	.timer_bit = 0,
+	.channel_offset = -0x80,
+	.clockevent_rating = 200,
+};
+
+static struct resource mtu2_0_resources[] __initdata = {
+	DEFINE_RES_MEM(0xfcff0300, 0x27),
+	DEFINE_RES_IRQ(gic_iid(139)), /* MTU2 TGI0A */
+};
+
+#define r7s72100_register_mtu2(idx)					\
+	platform_device_register_resndata(&platform_bus, "sh_mtu2",	\
+					  idx, mtu2_##idx##_resources,	\
+					  ARRAY_SIZE(mtu2_##idx##_resources), \
+					  &mtu2_##idx##_platform_data,	\
+					  sizeof(struct sh_timer_config))
+
 void __init r7s72100_add_dt_devices(void)
 {
 	r7s72100_register_scif(SCIF0);
@@ -68,6 +89,7 @@ void __init r7s72100_add_dt_devices(void)
 	r7s72100_register_scif(SCIF5);
 	r7s72100_register_scif(SCIF6);
 	r7s72100_register_scif(SCIF7);
+	r7s72100_register_mtu2(0);
 }
 
 void __init r7s72100_init_early(void)
-- 
1.8.4

[PATCH 06/33] ARM: shmobile: r8a7791 GPIO platform device support

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Add GPIO controller platform devices for the r8a7791 SoC.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7791.c | 40 ++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 84cad8c..59dd442 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -22,6 +22,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
@@ -39,9 +40,48 @@ static const struct resource pfc_resources[] __initconst = {
 	platform_device_register_simple("pfc-r8a7791", -1, pfc_resources, \
 					ARRAY_SIZE(pfc_resources))
 
+#define R8A7791_GPIO(idx, base, nr)					\
+static const struct resource r8a7791_gpio##idx##_resources[] __initconst = { \
+	DEFINE_RES_MEM((base), 0x50),					\
+	DEFINE_RES_IRQ(gic_spi(4 + (idx))),				\
+};									\
+									\
+static const struct gpio_rcar_config					\
+r8a7791_gpio##idx##_platform_data __initconst = {			\
+	.gpio_base	= 32 * (idx),					\
+	.irq_base	= 0,						\
+	.number_of_pins	= (nr),						\
+	.pctl_name	= "pfc-r8a7791",				\
+	.has_both_edge_trigger = 1,					\
+};									\
+
+R8A7791_GPIO(0, 0xe6050000, 32);
+R8A7791_GPIO(1, 0xe6051000, 32);
+R8A7791_GPIO(2, 0xe6052000, 32);
+R8A7791_GPIO(3, 0xe6053000, 32);
+R8A7791_GPIO(4, 0xe6054000, 32);
+R8A7791_GPIO(5, 0xe6055000, 32);
+R8A7791_GPIO(6, 0xe6055400, 32);
+R8A7791_GPIO(7, 0xe6055800, 26);
+
+#define r8a7791_register_gpio(idx)					\
+	platform_device_register_resndata(&platform_bus, "gpio_rcar", idx, \
+		r8a7791_gpio##idx##_resources,				\
+		ARRAY_SIZE(r8a7791_gpio##idx##_resources),		\
+		&r8a7791_gpio##idx##_platform_data,			\
+		sizeof(r8a7791_gpio##idx##_platform_data))
+
 void __init r8a7791_pinmux_init(void)
 {
 	r8a7791_register_pfc();
+	r8a7791_register_gpio(0);
+	r8a7791_register_gpio(1);
+	r8a7791_register_gpio(2);
+	r8a7791_register_gpio(3);
+	r8a7791_register_gpio(4);
+	r8a7791_register_gpio(5);
+	r8a7791_register_gpio(6);
+	r8a7791_register_gpio(7);
 }
 
 #define SCIF_COMMON(scif_type, baseaddr, irq)			\
-- 
1.8.4

[PATCH 07/33] ARM: shmobile: r8a73a4: don't use named irq for DMAEngine

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

sh-dma-engine driver doesn't care irq name.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a73a4.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index b0f2749..cc94b64 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -275,7 +275,7 @@ static const struct sh_dmae_pdata dma_pdata = {
 
 static struct resource dma_resources[] = {
 	DEFINE_RES_MEM(0xe6700020, 0x89e0),
-	DEFINE_RES_IRQ_NAMED(gic_spi(220), "error_irq"),
+	DEFINE_RES_IRQ(gic_spi(220)),
 	{
 		/* IRQ for channels 0-19 */
 		.start  = gic_spi(200),
-- 
1.8.4

[PATCH 15/33] ARM: shmobile: Add shared EMEV2 code for ->init_machine()

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Add a SoC specific function that initializes
clocks and starts DT probing in case of EMEV2.

This EMEV2 SoC support code may be built for
either legacy SHMOBILE or SMOBILE_MULTI.

The change allows us to support existing board
specific KZM9D DTB with these SoC specific
DT_MACHINE_START() callbacks.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-emev2.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 3ad531c..2d64b95 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -16,6 +16,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
+#include <linux/clk-provider.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -197,6 +198,16 @@ void __init emev2_init_delay(void)
 
 #ifdef CONFIG_USE_OF
 
+static void __init emev2_add_standard_devices_dt(void)
+{
+#ifdef CONFIG_COMMON_CLK
+	of_clk_init(NULL);
+#else
+	emev2_clock_init();
+#endif
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
 static const char *emev2_boards_compat_dt[] __initdata = {
 	"renesas,emev2",
 	NULL,
@@ -206,6 +217,7 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
 	.map_io		= emev2_map_io,
 	.init_early	= emev2_init_delay,
+	.init_machine	= emev2_add_standard_devices_dt,
 	.dt_compat	= emev2_boards_compat_dt,
 MACHINE_END
 
-- 
1.8.4

[PATCH 08/33] ARM: shmobile: Select GPIO in case of the r7s72100 SoC

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

The r7s72100 contains GPIO controllers so make sure the GPIO
subsystem can be built by selecting ARCH_WANT_OPTIONAL_GPIOLIB.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 4e1cc76..c604ef1 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -111,6 +111,7 @@ config ARCH_EMEV2
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
-- 
1.8.4

[PATCH 16/33] ARM: shmobile: Use ->init_late() in shared EMEV2 case

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Hook up shmobile_init_late() to enable various
code such as suspend-to-RAM and CPUIdle.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-emev2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 2d64b95..4d39bf4 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -218,6 +218,7 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.map_io		= emev2_map_io,
 	.init_early	= emev2_init_delay,
 	.init_machine	= emev2_add_standard_devices_dt,
+	.init_late	= shmobile_init_late,
 	.dt_compat	= emev2_boards_compat_dt,
 MACHINE_END
 
-- 
1.8.4

[PATCH 09/33] ARM: shmobile: r8a7778: add MMCIF clock support for DT

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7778.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index a77089f..e043715 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -173,6 +173,7 @@ static struct clk_lookup lookups[] = {
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */
+	CLKDEV_DEV_ID("ffe4e000.mmcif", &mstp_clks[MSTP331]), /* MMC */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
-- 
1.8.4

[PATCH 17/33] ARM: shmobile: Remove legacy KZM9D board code

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Remove the C and platform device version of KZM9D.

The DT version of KZM9D board support can now instead
directly be used with SoC specific code in setup-emev2.c.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig       |  6 ---
 arch/arm/mach-shmobile/Makefile      |  1 -
 arch/arm/mach-shmobile/Makefile.boot |  1 -
 arch/arm/mach-shmobile/board-kzm9d.c | 92 ------------------------------------
 4 files changed, 100 deletions(-)
 delete mode 100644 arch/arm/mach-shmobile/board-kzm9d.c

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index c604ef1..564e0ad 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -234,12 +234,6 @@ config MACH_KOELSCH
 	depends on ARCH_R8A7791
 	select USE_OF
 
-config MACH_KZM9D
-	bool "KZM9D board"
-	depends on ARCH_EMEV2
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select USE_OF
-
 config MACH_KZM9G
 	bool "KZM-A9-GT board"
 	depends on ARCH_SH73A0
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 51db2bc..c7e8774 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -71,7 +71,6 @@ obj-$(CONFIG_MACH_LAGER_REFERENCE)	+= board-lager-reference.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE)	+= board-armadillo800eva-reference.o
 obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch.o
-obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d.o
 obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o
 endif
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 391d72a..4f30e3d 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -8,7 +8,6 @@ loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
 loadaddr-$(CONFIG_MACH_GENMAI) += 0x8008000
 loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
-loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
deleted file mode 100644
index 30c2cc6..0000000
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * kzm9d board support
- *
- * Copyright (C) 2012  Renesas Solutions Corp.
- * Copyright (C) 2012  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <mach/common.h>
-#include <mach/emev2.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/* Ether */
-static struct resource smsc911x_resources[] = {
-	[0] = {
-		.start	= 0x20000000,
-		.end	= 0x2000ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= EMEV2_GPIO_IRQ(1),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_platdata = {
-	.flags		= SMSC911X_USE_32BIT,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-};
-
-static struct platform_device smsc91x_device = {
-	.name	= "smsc911x",
-	.id	= -1,
-	.dev	= {
-		  .platform_data = &smsc911x_platdata,
-		},
-	.num_resources	= ARRAY_SIZE(smsc911x_resources),
-	.resource	= smsc911x_resources,
-};
-
-static struct platform_device *kzm9d_devices[] __initdata = {
-	&smsc91x_device,
-};
-
-void __init kzm9d_add_standard_devices(void)
-{
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	emev2_add_standard_devices();
-
-	platform_add_devices(kzm9d_devices, ARRAY_SIZE(kzm9d_devices));
-}
-
-static const char *kzm9d_boards_compat_dt[] __initdata = {
-	"renesas,kzm9d",
-	NULL,
-};
-
-DT_MACHINE_START(KZM9D_DT, "kzm9d")
-	.smp		= smp_ops(emev2_smp_ops),
-	.map_io		= emev2_map_io,
-	.init_early	= emev2_init_delay,
-	.init_machine	= kzm9d_add_standard_devices,
-	.init_late	= shmobile_init_late,
-	.dt_compat	= kzm9d_boards_compat_dt,
-MACHINE_END
-- 
1.8.4

[PATCH 18/33] ARM: shmobile: Remove legacy platform devices from EMEV2 SoC code

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Now when KZM9D legacy C board support code is
gone then remove emev2_add_standard_devices()
and all the platform devices from setup-emev2.c.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/emev2.h |   5 -
 arch/arm/mach-shmobile/setup-emev2.c        | 148 ----------------------------
 2 files changed, 153 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
index c2eb756..fcb142a 100644
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ b/arch/arm/mach-shmobile/include/mach/emev2.h
@@ -3,12 +3,7 @@
 
 extern void emev2_map_io(void);
 extern void emev2_init_delay(void);
-extern void emev2_add_standard_devices(void);
 extern void emev2_clock_init(void);
-
-#define EMEV2_GPIO_BASE 200
-#define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))
-
 extern struct smp_operations emev2_smp_ops;
 
 #endif /* __ASM_EMEV2_H__ */
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 4d39bf4..e7031b0 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -19,22 +19,12 @@
 #include <linux/clk-provider.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/gpio-em.h>
 #include <linux/of_platform.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
 #include <mach/common.h>
 #include <mach/emev2.h>
-#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 static struct map_desc emev2_io_desc[] __initdata = {
 #ifdef CONFIG_SMP
@@ -53,144 +43,6 @@ void __init emev2_map_io(void)
 	iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
 }
 
-/* UART */
-static struct resource uart0_resources[] = {
-	DEFINE_RES_MEM(0xe1020000, 0x38),
-	DEFINE_RES_IRQ(40),
-};
-
-static struct resource uart1_resources[] = {
-	DEFINE_RES_MEM(0xe1030000, 0x38),
-	DEFINE_RES_IRQ(41),
-};
-
-static struct resource uart2_resources[] = {
-	DEFINE_RES_MEM(0xe1040000, 0x38),
-	DEFINE_RES_IRQ(42),
-};
-
-static struct resource uart3_resources[] = {
-	DEFINE_RES_MEM(0xe1050000, 0x38),
-	DEFINE_RES_IRQ(43),
-};
-
-#define emev2_register_uart(idx)					\
-	platform_device_register_simple("serial8250-em", idx,		\
-					uart##idx##_resources,		\
-					ARRAY_SIZE(uart##idx##_resources))
-
-/* STI */
-static struct resource sti_resources[] = {
-	DEFINE_RES_MEM(0xe0180000, 0x54),
-	DEFINE_RES_IRQ(157),
-};
-
-#define emev2_register_sti()					\
-	platform_device_register_simple("em_sti", 0,		\
-					sti_resources,		\
-					ARRAY_SIZE(sti_resources))
-
-/* GIO */
-static struct gpio_em_config gio0_config = {
-	.gpio_base = 0,
-	.irq_base = EMEV2_GPIO_IRQ(0),
-	.number_of_pins = 32,
-};
-
-static struct resource gio0_resources[] = {
-	DEFINE_RES_MEM(0xe0050000, 0x2c),
-	DEFINE_RES_MEM(0xe0050040, 0x20),
-	DEFINE_RES_IRQ(99),
-	DEFINE_RES_IRQ(100),
-};
-
-static struct gpio_em_config gio1_config = {
-	.gpio_base = 32,
-	.irq_base = EMEV2_GPIO_IRQ(32),
-	.number_of_pins = 32,
-};
-
-static struct resource gio1_resources[] = {
-	DEFINE_RES_MEM(0xe0050080, 0x2c),
-	DEFINE_RES_MEM(0xe00500c0, 0x20),
-	DEFINE_RES_IRQ(101),
-	DEFINE_RES_IRQ(102),
-};
-
-static struct gpio_em_config gio2_config = {
-	.gpio_base = 64,
-	.irq_base = EMEV2_GPIO_IRQ(64),
-	.number_of_pins = 32,
-};
-
-static struct resource gio2_resources[] = {
-	DEFINE_RES_MEM(0xe0050100, 0x2c),
-	DEFINE_RES_MEM(0xe0050140, 0x20),
-	DEFINE_RES_IRQ(103),
-	DEFINE_RES_IRQ(104),
-};
-
-static struct gpio_em_config gio3_config = {
-	.gpio_base = 96,
-	.irq_base = EMEV2_GPIO_IRQ(96),
-	.number_of_pins = 32,
-};
-
-static struct resource gio3_resources[] = {
-	DEFINE_RES_MEM(0xe0050180, 0x2c),
-	DEFINE_RES_MEM(0xe00501c0, 0x20),
-	DEFINE_RES_IRQ(105),
-	DEFINE_RES_IRQ(106),
-};
-
-static struct gpio_em_config gio4_config = {
-	.gpio_base = 128,
-	.irq_base = EMEV2_GPIO_IRQ(128),
-	.number_of_pins = 31,
-};
-
-static struct resource gio4_resources[] = {
-	DEFINE_RES_MEM(0xe0050200, 0x2c),
-	DEFINE_RES_MEM(0xe0050240, 0x20),
-	DEFINE_RES_IRQ(107),
-	DEFINE_RES_IRQ(108),
-};
-
-#define emev2_register_gio(idx)						\
-	platform_device_register_resndata(&platform_bus, "em_gio",	\
-					  idx, gio##idx##_resources,	\
-					  ARRAY_SIZE(gio##idx##_resources), \
-					  &gio##idx##_config,		\
-					  sizeof(struct gpio_em_config))
-
-static struct resource pmu_resources[] = {
-	DEFINE_RES_IRQ(152),
-	DEFINE_RES_IRQ(153),
-};
-
-#define emev2_register_pmu()					\
-	platform_device_register_simple("arm-pmu", -1,		\
-					pmu_resources,		\
-					ARRAY_SIZE(pmu_resources))
-
-void __init emev2_add_standard_devices(void)
-{
-	if (!IS_ENABLED(CONFIG_COMMON_CLK))
-		emev2_clock_init();
-
-	emev2_register_uart(0);
-	emev2_register_uart(1);
-	emev2_register_uart(2);
-	emev2_register_uart(3);
-	emev2_register_sti();
-	emev2_register_gio(0);
-	emev2_register_gio(1);
-	emev2_register_gio(2);
-	emev2_register_gio(3);
-	emev2_register_gio(4);
-	emev2_register_pmu();
-}
-
 void __init emev2_init_delay(void)
 {
 	shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
-- 
1.8.4

[PATCH 19/33] ARM: shmobile: r8a7778: add HSPI clock support for DT

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7778.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index 011564f..5406434 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -203,8 +203,11 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */
 	CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
+	CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
 	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
+	CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */
 	CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
+	CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
 	CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
 
 	CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
-- 
1.8.4

[PATCH 20/33] ARM: shmobile: Select USE_OF on EMEV2

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Now when the legacy KZM9D board code is gone, make sure
USE_OF is selected in case of the EMEV2 SoC.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig       | 1 +
 arch/arm/mach-shmobile/setup-emev2.c | 4 ----
 2 files changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 564e0ad..180b71f 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -108,6 +108,7 @@ config ARCH_EMEV2
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
+	select USE_OF
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index e7031b0..c8f2a1a 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -48,8 +48,6 @@ void __init emev2_init_delay(void)
 	shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
 }
 
-#ifdef CONFIG_USE_OF
-
 static void __init emev2_add_standard_devices_dt(void)
 {
 #ifdef CONFIG_COMMON_CLK
@@ -73,5 +71,3 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.init_late	= shmobile_init_late,
 	.dt_compat	= emev2_boards_compat_dt,
 MACHINE_END
-
-#endif /* CONFIG_USE_OF */
-- 
1.8.4

[PATCH 21/33] ARM: shmobile: r8a7791: Add DU and LVDS clocks

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The ZX parent clock isn't implemented yet, add it as well.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7791.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index c9a26f1..fda7c6c 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -103,6 +103,7 @@ SH_FIXED_RATIO_CLK_SET(hp_clk,			pll1_clk,	1, 12);
 SH_FIXED_RATIO_CLK_SET(p_clk,			pll1_clk,	1, 24);
 SH_FIXED_RATIO_CLK_SET(rclk_clk,		pll1_clk,	1, (48 * 1024));
 SH_FIXED_RATIO_CLK_SET(mp_clk,			pll1_div2_clk,	1, 15);
+SH_FIXED_RATIO_CLK_SET(zx_clk,			pll1_clk,	1, 3);
 
 static struct clk *main_clks[] = {
 	&extal_clk,
@@ -116,11 +117,12 @@ static struct clk *main_clks[] = {
 	&rclk_clk,
 	&mp_clk,
 	&cp_clk,
+	&zx_clk,
 };
 
 /* MSTP */
 enum {
-	MSTP721, MSTP720,
+	MSTP726, MSTP724, MSTP723, MSTP721, MSTP720,
 	MSTP719, MSTP718, MSTP715, MSTP714,
 	MSTP216, MSTP207, MSTP206,
 	MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107,
@@ -129,6 +131,9 @@ enum {
 };
 
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
+	[MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
+	[MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
 	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
 	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
 	[MSTP719] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 19, 0), /* SCIF2 */
@@ -164,6 +169,9 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("peripheral_clk", &hp_clk),
 
 	/* MSTP */
+	CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7791", &mstp_clks[MSTP726]),
+	CLKDEV_ICK_ID("du.0", "rcar-du-r8a7791", &mstp_clks[MSTP724]),
+	CLKDEV_ICK_ID("du.1", "rcar-du-r8a7791", &mstp_clks[MSTP723]),
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
 	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), /* SCIFB0 */
-- 
1.8.4

[PATCH 22/33] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

SH-Mobile platforms are transitioning from non-multiplatform to
multiplatform kernel. A new ARCH_SHMOBILE_MULTI configuration symbol has
been created to group all multiplatform-enabled SH-Mobile SoCs. The
existing ARCH_SHMOBILE configuration symbol groups SoCs that haven't
been converted yet.

This arrangement works fine for the arch/ code, but lots of drivers
needed on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI depend on
ARCH_SHMOBILE only. In order to avoid changing them, rename
ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY, and create a new boolean
ARCH_SHMOBILE configuration symbol that is selected by both
ARCH_SHMOBILE_LEGACY and ARCH_SHMOBILE_MULTI.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/Kconfig                           | 14 ++++++++------
 arch/arm/Makefile                          |  1 -
 arch/arm/boot/compressed/Makefile          |  2 +-
 arch/arm/boot/dts/Makefile                 |  2 +-
 arch/arm/configs/ape6evm_defconfig         |  2 +-
 arch/arm/configs/armadillo800eva_defconfig |  2 +-
 arch/arm/configs/bockw_defconfig           |  2 +-
 arch/arm/configs/koelsch_defconfig         |  2 +-
 arch/arm/configs/kzm9d_defconfig           |  2 +-
 arch/arm/configs/kzm9g_defconfig           |  2 +-
 arch/arm/configs/lager_defconfig           |  2 +-
 arch/arm/configs/mackerel_defconfig        |  2 +-
 arch/arm/configs/marzen_defconfig          |  2 +-
 arch/arm/mach-shmobile/Kconfig             |  8 ++++++--
 drivers/Makefile                           |  2 +-
 15 files changed, 26 insertions(+), 21 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c1f1a7e..483d316 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -644,8 +644,9 @@ config ARCH_MSM
 	  stack and controls some vital subsystems
 	  (clock and power control, etc).
 
-config ARCH_SHMOBILE
-	bool "Renesas SH-Mobile / R-Mobile"
+config ARCH_SHMOBILE_LEGACY
+	bool "Renesas SH-Mobile / R-Mobile (non-multiplatform)"
+	select ARCH_SHMOBILE
 	select ARM_PATCH_PHYS_VIRT
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
@@ -660,7 +661,8 @@ config ARCH_SHMOBILE
 	select PM_GENERIC_DOMAINS if PM
 	select SPARSE_IRQ
 	help
-	  Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
+	  Support for Renesas's SH-Mobile and R-Mobile ARM platforms using
+	  a non-multiplatform kernel.
 
 config ARCH_RPC
 	bool "RiscPC"
@@ -1611,7 +1613,7 @@ config HZ_FIXED
 	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
 		ARCH_S5PV210 || ARCH_EXYNOS4
 	default AT91_TIMER_HZ if ARCH_AT91
-	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
+	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
 	default 0
 
 choice
@@ -1796,8 +1798,8 @@ config ARCH_WANT_GENERAL_HUGETLB
 source "mm/Kconfig"
 
 config FORCE_MAX_ZONEORDER
-	int "Maximum zone order" if ARCH_SHMOBILE
-	range 11 64 if ARCH_SHMOBILE
+	int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
+	range 11 64 if ARCH_SHMOBILE_LEGACY
 	default "12" if SOC_AM33XX
 	default "9" if SA1111
 	default "11"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c99b108..1edf8eb 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -190,7 +190,6 @@ machine-$(CONFIG_ARCH_S5PC100)		+= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
 machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
-machine-$(CONFIG_ARCH_SHMOBILE_MULTI) 	+= shmobile
 machine-$(CONFIG_ARCH_SIRF)		+= prima2
 machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index e7190bb..f54d5a2 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -64,7 +64,7 @@ else
 endif
 endif
 
-ifeq ($(CONFIG_ARCH_SHMOBILE),y)
+ifeq ($(CONFIG_ARCH_SHMOBILE_LEGACY),y)
 OBJS		+= head-shmobile.o
 endif
 
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d57c1a6..5839077 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -216,7 +216,7 @@ dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
 dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
 	s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
diff --git a/arch/arm/configs/ape6evm_defconfig b/arch/arm/configs/ape6evm_defconfig
index 1ce3994..cb26c62 100644
--- a/arch/arm/configs/ape6evm_defconfig
+++ b/arch/arm/configs/ape6evm_defconfig
@@ -13,7 +13,7 @@ CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 # CONFIG_BLOCK is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
 CONFIG_ARCH_R8A73A4=y
 CONFIG_MACH_APE6EVM=y
 # CONFIG_ARM_THUMB is not set
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
index fae939d..5abf1a2 100644
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ b/arch/arm/configs/armadillo800eva_defconfig
@@ -15,7 +15,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
 CONFIG_ARCH_R8A7740=y
 CONFIG_MACH_ARMADILLO800EVA=y
 # CONFIG_SH_TIMER_TMU is not set
diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig
index b38cd10..1dd3971 100644
--- a/arch/arm/configs/bockw_defconfig
+++ b/arch/arm/configs/bockw_defconfig
@@ -8,7 +8,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
 CONFIG_ARCH_R8A7778=y
 CONFIG_MACH_BOCKW=y
 CONFIG_MEMORY_START=0x60000000
diff --git a/arch/arm/configs/koelsch_defconfig b/arch/arm/configs/koelsch_defconfig
index 825c16d..7fd65a0 100644
--- a/arch/arm/configs/koelsch_defconfig
+++ b/arch/arm/configs/koelsch_defconfig
@@ -9,7 +9,7 @@ CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 # CONFIG_BLOCK is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
 CONFIG_ARCH_R8A7791=y
 CONFIG_MACH_KOELSCH=y
 # CONFIG_SWP_EMULATE is not set
diff --git a/arch/arm/configs/kzm9d_defconfig b/arch/arm/configs/kzm9d_defconfig
index 6c37f4a..217f1dd 100644
--- a/arch/arm/configs/kzm9d_defconfig
+++ b/arch/arm/configs/kzm9d_defconfig
@@ -13,7 +13,7 @@ CONFIG_SLAB=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
 CONFIG_ARCH_EMEV2=y
 CONFIG_MACH_KZM9D=y
 CONFIG_MEMORY_START=0x40000000
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index 1ad0280..9934dbc2 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -22,7 +22,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
 CONFIG_ARCH_SH73A0=y
 CONFIG_MACH_KZM9G=y
 CONFIG_MEMORY_START=0x41000000
diff --git a/arch/arm/configs/lager_defconfig b/arch/arm/configs/lager_defconfig
index 35bff5e..35dc8b2 100644
--- a/arch/arm/configs/lager_defconfig
+++ b/arch/arm/configs/lager_defconfig
@@ -12,7 +12,7 @@ CONFIG_SLAB=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
 CONFIG_ARCH_R8A7790=y
 CONFIG_MACH_LAGER=y
 # CONFIG_SH_TIMER_TMU is not set
diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig
index 9fb1189..a61e165 100644
--- a/arch/arm/configs/mackerel_defconfig
+++ b/arch/arm/configs/mackerel_defconfig
@@ -14,7 +14,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
 CONFIG_ARCH_SH7372=y
 CONFIG_MACH_MACKEREL=y
 CONFIG_MEMORY_SIZE=0x10000000
diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 5cc6360..6981338 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -9,7 +9,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
 CONFIG_ARCH_R8A7779=y
 CONFIG_MACH_MARZEN=y
 CONFIG_MEMORY_START=0x60000000
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 180b71f..1b7df17 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,6 +1,10 @@
+config ARCH_SHMOBILE
+	bool
+
 config ARCH_SHMOBILE_MULTI
 	bool "SH-Mobile Series" if ARCH_MULTI_V7
 	depends on MMU
+	select ARCH_SHMOBILE
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
@@ -30,7 +34,7 @@ config MACH_KZM9D
 comment "SH-Mobile System Configuration"
 endif
 
-if ARCH_SHMOBILE
+if ARCH_SHMOBILE_LEGACY
 
 comment "SH-Mobile System Type"
 
@@ -272,7 +276,7 @@ source "drivers/sh/Kconfig"
 
 endif
 
-if ARCH_SHMOBILE || ARCH_SHMOBILE_MULTI
+if ARCH_SHMOBILE
 
 menu "Timer and clock configuration"
 
diff --git a/drivers/Makefile b/drivers/Makefile
index 3cc8214..8e3b8b0 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -118,7 +118,7 @@ obj-$(CONFIG_SGI_SN)		+= sn/
 obj-y				+= firmware/
 obj-$(CONFIG_CRYPTO)		+= crypto/
 obj-$(CONFIG_SUPERH)		+= sh/
-obj-$(CONFIG_ARCH_SHMOBILE)	+= sh/
+obj-$(CONFIG_ARCH_SHMOBILE_LEGACY)	+= sh/
 ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
 obj-y				+= clocksource/
 endif
-- 
1.8.4

[PATCH 23/33] ARM: shmobile: Add r8a7790 clocks for thermal devices

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Add the r8a7790 DT thermal device to the legacy clocks.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7790.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 5269640..33e80b10 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -286,6 +286,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
 	CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
 	CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
+	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
 	CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
-- 
1.8.4

[PATCH 24/33] ARM: shmobile: Add r8a7791 thermal platform device

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Add a thermal platform device for the legacy case
on the r8a7791 SoC. This keeps the r8a7791 in sync
with the r8a7790 sister device.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7791.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 59dd442..cddca99 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -189,6 +189,17 @@ static struct resource irqc0_resources[] = {
 					  &irqc##idx##_data,		\
 					  sizeof(struct renesas_irqc_config))
 
+static const struct resource thermal_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe61f0000, 0x14),
+	DEFINE_RES_MEM(0xe61f0100, 0x38),
+	DEFINE_RES_IRQ(gic_spi(69)),
+};
+
+#define r8a7791_register_thermal()					\
+	platform_device_register_simple("rcar_thermal", -1,		\
+					thermal_resources,		\
+					ARRAY_SIZE(thermal_resources))
+
 void __init r8a7791_add_dt_devices(void)
 {
 	r8a7791_register_scif(SCIFA0);
@@ -213,6 +224,7 @@ void __init r8a7791_add_standard_devices(void)
 {
 	r8a7791_add_dt_devices();
 	r8a7791_register_irqc(0);
+	r8a7791_register_thermal();
 }
 
 void __init r8a7791_init_early(void)
-- 
1.8.4

[PATCH 25/33] ARM: shmobile: Add r8a7791 clocks for thermal devices

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Add the r8a7791 thermal device as legacy clocks.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7791.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index fda7c6c..ff2d60d 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -124,6 +124,7 @@ static struct clk *main_clks[] = {
 enum {
 	MSTP726, MSTP724, MSTP723, MSTP721, MSTP720,
 	MSTP719, MSTP718, MSTP715, MSTP714,
+	MSTP522,
 	MSTP216, MSTP207, MSTP206,
 	MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107,
 	MSTP124,
@@ -140,6 +141,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP718] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 18, 0), /* SCIF3 */
 	[MSTP715] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 15, 0), /* SCIF4 */
 	[MSTP714] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 14, 0), /* SCIF5 */
+	[MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
 	[MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
 	[MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
 	[MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
@@ -188,6 +190,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */
 	CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */
 	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
+	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
+	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
 };
 
 #define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
-- 
1.8.4

[PATCH 26/33] ARM: shmobile: r8a7790: care EXTAL divider settings

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

EXTAL clock frequency needs 1/2 when
(MD14, MD13, MD19) = (1, x, x).

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7790.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 33e80b10..ecec746 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -329,10 +329,10 @@ void __init r8a7790_clock_init(void)
 		R8A7790_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66);
 		break;
 	case MD(14):
-		R8A7790_CLOCK_ROOT(26, &extal_div2_clk, 200, 240, 122, 102);
+		R8A7790_CLOCK_ROOT(26 / 2, &extal_div2_clk, 200, 240, 122, 102);
 		break;
 	case MD(13) | MD(14):
-		R8A7790_CLOCK_ROOT(30, &extal_div2_clk, 172, 208, 106, 88);
+		R8A7790_CLOCK_ROOT(30 / 2, &extal_div2_clk, 172, 208, 106, 88);
 		break;
 	}
 
-- 
1.8.4

[PATCH 27/33] ARM: shmobile: r8a7790: fixup I2C clock source

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

I2C clock is based on P clock, not HP clock

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7790.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index ecec746..3a267c2 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -196,10 +196,10 @@ enum {
 };
 
 static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP931] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 31, 0), /* I2C0 */
-	[MSTP930] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 30, 0), /* I2C1 */
-	[MSTP929] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 29, 0), /* I2C2 */
-	[MSTP928] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 28, 0), /* I2C3 */
+	[MSTP931] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 31, 0), /* I2C0 */
+	[MSTP930] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 30, 0), /* I2C1 */
+	[MSTP929] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 29, 0), /* I2C2 */
+	[MSTP928] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 28, 0), /* I2C3 */
 	[MSTP917] = SH_CLK_MSTP32(&qspi_clk, SMSTPCR9, 17, 0), /* QSPI */
 	[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
 	[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
-- 
1.8.4

[PATCH 28/33] ARM: shmobile: r8a7790: tidyup clock table order

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

SuperH lookups clock is using CLKDEV_CON/DEV/ICK_ID() macro
for a long term.
But in these days, the ICK clock is defined in random place.
This patch arranges it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7790.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 3a267c2..a510813 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -266,11 +266,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("ssprs",		&div6_clks[DIV6_SSPRS]),
 
 	/* MSTP */
-	CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]),
-	CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]),
-	CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
-	CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
-	CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
 	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
@@ -303,7 +298,15 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
 	CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
 	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP704]),
+
+	/* ICK */
 	CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]),
+	CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]),
+	CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]),
+	CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
+	CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
+	CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
+
 };
 
 #define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
-- 
1.8.4

[PATCH 29/33] ARM: shmobile: Select AUTO_ZRELADDR for EMEV2

[Simon Horman]

Since ("ARM: shmobile: Remove legacy KZM9D board code")
It is now necessary for AUTO_ZRELADDR to be selected
in order for the kernel to build with kzm9d_defconfig.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 1b7df17..aa9017b 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -113,6 +113,7 @@ config ARCH_EMEV2
 	select ARM_GIC
 	select CPU_V7
 	select USE_OF
+	select AUTO_ZRELADDR
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
-- 
1.8.4

[PATCH 30/33] ARM: shmobile: r8a7778: add HPBIFx DMAEngine support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7778.h | 18 ++++++++++
 arch/arm/mach-shmobile/setup-r8a7778.c        | 51 +++++++++++++++++++++++++++
 2 files changed, 69 insertions(+)

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h
index 441886c..b497f93 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7778.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h
@@ -27,6 +27,24 @@ enum {
 	HPBDMA_SLAVE_DUMMY,
 	HPBDMA_SLAVE_SDHI0_TX,
 	HPBDMA_SLAVE_SDHI0_RX,
+	HPBDMA_SLAVE_HPBIF0_TX,
+	HPBDMA_SLAVE_HPBIF0_RX,
+	HPBDMA_SLAVE_HPBIF1_TX,
+	HPBDMA_SLAVE_HPBIF1_RX,
+	HPBDMA_SLAVE_HPBIF2_TX,
+	HPBDMA_SLAVE_HPBIF2_RX,
+	HPBDMA_SLAVE_HPBIF3_TX,
+	HPBDMA_SLAVE_HPBIF3_RX,
+	HPBDMA_SLAVE_HPBIF4_TX,
+	HPBDMA_SLAVE_HPBIF4_RX,
+	HPBDMA_SLAVE_HPBIF5_TX,
+	HPBDMA_SLAVE_HPBIF5_RX,
+	HPBDMA_SLAVE_HPBIF6_TX,
+	HPBDMA_SLAVE_HPBIF6_RX,
+	HPBDMA_SLAVE_HPBIF7_TX,
+	HPBDMA_SLAVE_HPBIF7_RX,
+	HPBDMA_SLAVE_HPBIF8_TX,
+	HPBDMA_SLAVE_HPBIF8_RX,
 };
 
 extern void r8a7778_add_standard_devices(void);
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 03fcc59..81701cf 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -319,6 +319,29 @@ void __init r8a7778_add_dt_devices(void)
 #define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE	BIT(1)	/* SDHI0 */
 #define HPB_DMAE_ASYNCMDR_ASMD21_MULTI	0	/* SDHI0 */
 
+#define HPBDMA_HPBIF(_id)				\
+{							\
+	.id	= HPBDMA_SLAVE_HPBIF## _id ##_TX,	\
+	.addr	= 0xffda0000 + (_id * 0x1000),		\
+	.dcr	= HPB_DMAE_DCR_CT |			\
+		  HPB_DMAE_DCR_DIP |			\
+		  HPB_DMAE_DCR_SPDS_32BIT |		\
+		  HPB_DMAE_DCR_DMDL |			\
+		  HPB_DMAE_DCR_DPDS_32BIT,		\
+	.port   = 0x1111,				\
+	.dma_ch = (28 + _id),				\
+}, {							\
+	.id	= HPBDMA_SLAVE_HPBIF## _id ##_RX,	\
+	.addr	= 0xffda0000 + (_id * 0x1000),		\
+	.dcr	= HPB_DMAE_DCR_CT |			\
+		  HPB_DMAE_DCR_DIP |			\
+		  HPB_DMAE_DCR_SMDL |			\
+		  HPB_DMAE_DCR_SPDS_32BIT |		\
+		  HPB_DMAE_DCR_DPDS_32BIT,		\
+	.port   = 0x1111,				\
+	.dma_ch = (28 + _id),				\
+}
+
 static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
 	{
 		.id	= HPBDMA_SLAVE_SDHI0_TX,
@@ -349,11 +372,39 @@ static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
 		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
 		.dma_ch	= 22,
 	},
+
+	HPBDMA_HPBIF(0),
+	HPBDMA_HPBIF(1),
+	HPBDMA_HPBIF(2),
+	HPBDMA_HPBIF(3),
+	HPBDMA_HPBIF(4),
+	HPBDMA_HPBIF(5),
+	HPBDMA_HPBIF(6),
+	HPBDMA_HPBIF(7),
+	HPBDMA_HPBIF(8),
 };
 
 static const struct hpb_dmae_channel hpb_dmae_channels[] = {
 	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
 	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */
 };
 
 static struct hpb_dmae_pdata dma_platform_data __initdata = {
-- 
1.8.4

[PATCH 31/33] ARM: shmobile: r8a7790: add SSI MSTP clocks

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7790.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index a510813..36c8917 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -53,6 +53,7 @@
 #define SMSTPCR7 0xe615014c
 #define SMSTPCR8 0xe6150990
 #define SMSTPCR9 0xe6150994
+#define SMSTPCR10 0xe6150998
 
 #define SDCKCR		0xE6150074
 #define SD2CKCR		0xE6150078
@@ -182,6 +183,8 @@ static struct clk div6_clks[DIV6_NR] = {
 
 /* MSTP */
 enum {
+	MSTP1015, MSTP1014, MSTP1013, MSTP1012, MSTP1011, MSTP1010,
+	MSTP1009, MSTP1008, MSTP1007, MSTP1006, MSTP1005,
 	MSTP931, MSTP930, MSTP929, MSTP928,
 	MSTP917,
 	MSTP813,
@@ -196,6 +199,17 @@ enum {
 };
 
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP1015] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 15, 0), /* SSI0 */
+	[MSTP1014] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 14, 0), /* SSI1 */
+	[MSTP1013] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 13, 0), /* SSI2 */
+	[MSTP1012] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 12, 0), /* SSI3 */
+	[MSTP1011] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 11, 0), /* SSI4 */
+	[MSTP1010] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 10, 0), /* SSI5 */
+	[MSTP1009] = SH_CLK_MSTP32(&p_clk, SMSTPCR10,  9, 0), /* SSI6 */
+	[MSTP1008] = SH_CLK_MSTP32(&p_clk, SMSTPCR10,  8, 0), /* SSI7 */
+	[MSTP1007] = SH_CLK_MSTP32(&p_clk, SMSTPCR10,  7, 0), /* SSI8 */
+	[MSTP1006] = SH_CLK_MSTP32(&p_clk, SMSTPCR10,  6, 0), /* SSI9 */
+	[MSTP1005] = SH_CLK_MSTP32(&p_clk, SMSTPCR10,  5, 0), /* SSI ALL */
 	[MSTP931] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 31, 0), /* I2C0 */
 	[MSTP930] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 30, 0), /* I2C1 */
 	[MSTP929] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 29, 0), /* I2C2 */
@@ -266,6 +280,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("ssprs",		&div6_clks[DIV6_SSPRS]),
 
 	/* MSTP */
+	CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP1005]),
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
 	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
@@ -306,6 +321,16 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
 	CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
 	CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
+	CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP1015]),
+	CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP1014]),
+	CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP1013]),
+	CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP1012]),
+	CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP1011]),
+	CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP1010]),
+	CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP1009]),
+	CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP1008]),
+	CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP1007]),
+	CLKDEV_ICK_ID("ssi.9", "rcar_sound", &mstp_clks[MSTP1006]),
 
 };
 
-- 
1.8.4

[PATCH 32/33] ARM: shmobile: r8a7740: add FSI clock support for DT

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7740.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index c826bca..e9a3c64 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -585,6 +585,7 @@ static struct clk_lookup lookups[] = {
 
 	CLKDEV_DEV_ID("sh_cmt.10",		&mstp_clks[MSTP329]),
 	CLKDEV_DEV_ID("sh_fsi2",		&mstp_clks[MSTP328]),
+	CLKDEV_DEV_ID("fe1f0000.sound",		&mstp_clks[MSTP328]),
 	CLKDEV_DEV_ID("i2c-sh_mobile.1",	&mstp_clks[MSTP323]),
 	CLKDEV_DEV_ID("e6c20000.i2c",		&mstp_clks[MSTP323]),
 	CLKDEV_DEV_ID("renesas_usbhs",		&mstp_clks[MSTP320]),
-- 
1.8.4

[PATCH 33/33] ARM: shmobile: r8a7779: add HSPI clock support for DT

[Simon Horman]

Based on work for the r8a7778 SoC by Kuninori Morimoto.

Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 5c83259..b545c8d 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -198,8 +198,11 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
 	CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
+	CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
 	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
+	CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */
 	CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
+	CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
 	CLKDEV_DEV_ID("ffe4c000.sdhi", &mstp_clks[MSTP323]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
-- 
1.8.4

[GIT PULL v2 00/33] Renesas ARM based SoC updates for v3.14

[Simon Horman]

On Fri, Dec 13, 2013 at 11:29:33AM +0900, Simon Horman wrote:
> Hi Kevin, Hi Olof, Hi Arnd,
> 
> please consider these Renesas ARM based SoC updates for v3.14.
> 
> As discussed elsewhere, this pull-request also includes defconfig changes
> related to renaming ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY. These are also
> to avoid build regressions when using defconfigs
> 
> As this pull request is based on v3.12, which does not include
> genmai_defconfig, it has not been updated. Rather, I have queued up a patch
> in my defconfig to switch it to use ARCH_SHMOBILE_LEGACY.  This does
> involve breaking that defconfig. However as it is new and not in
> wide-spread use it seems better to live with that temporary breakage than
> to have soc depend on defconfig (as was the case in the previous version of
> this pull request).

Gentle ping. I would be most grateful if this was merged.

> 
> 
> The following changes since commit 6ce4eac1f600b34f2f7f58f9cd8f0503d79e42ae:
> 
>   Linux 3.13-rc1 (2013-11-22 11:30:55 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc-for-v3.14
> 
> for you to fetch changes up to fee05eb3d2ce4813b5e9a70ab888d2bc0047f4e1:
> 
>   ARM: shmobile: r8a7779: add HSPI clock support for DT (2013-12-10 17:20:15 +0900)
> 
> ----------------------------------------------------------------
> Renesas ARM based SoC updates for v3.14
> 
> * Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY
> 
> * r8a7791 SoC (R-Car M2)
>   - Add thermal platform device
>   - Add DU and LVDS clocks
>   - GPIO platform device support
>   - PFC platform device support
>   - Select IRQC
> 
> * r8a7790 SoC (R-Car H2)
>   - Tidyup clock table order
>   - Fixup I2C clock source
>   - Correct EXTAL divider settings
>   - Add clocks for thermal devices and SSI
> 
> * r8a7779 SoC (R-Car H1)
>   - Add I2C clock for DT
> 
> * r8a7778 SoC (R-Car M1)
>   - Add HSPI clocks for DT
>   - Add I2C clock for DT
>   - Add HPBIFx DMAEngine support
> 
> * r8a7740 SoC (R-Mobile A1)
>   - Add FSI clocks for DT
> 
> * emev2 SoC (Emma Mobile)
>   - Move to Multi-platform
>   - Remove legacy board code
> 
> * r7s72100 SoC (RZ/A1H)
>   - Select GPIO
> 
> * r8a73a4 SoC (R-Mobile APE6)
>   - Don't used named IRC for DMAEngine
> 
> ----------------------------------------------------------------
> Hiep Cao Minh (1):
>       ARM: shmobile: r8a7790: add QSPI support
> 
> Kuninori Morimoto (13):
>       ARM: shmobile: r8a7778: add I2C clock for DT
>       ARM: shmobile: r8a7779: add I2C clock for DT
>       ARM: shmobile: r8a73a4: don't use named irq for DMAEngine
>       ARM: shmobile: r8a7778: add MMCIF clock support for DT
>       ARM: shmobile: r8a7778: add SDHI clock support for DT
>       ARM: shmobile: r8a7779: add SDHI clock support for DT
>       ARM: shmobile: r8a7778: add HSPI clock support for DT
>       ARM: shmobile: r8a7790: care EXTAL divider settings
>       ARM: shmobile: r8a7790: fixup I2C clock source
>       ARM: shmobile: r8a7790: tidyup clock table order
>       ARM: shmobile: r8a7778: add HPBIFx DMAEngine support
>       ARM: shmobile: r8a7790: add SSI MSTP clocks
>       ARM: shmobile: r8a7740: add FSI clock support for DT
> 
> Laurent Pinchart (2):
>       ARM: shmobile: r8a7791: Add DU and LVDS clocks
>       ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY
> 
> Magnus Damm (14):
>       ARM: shmobile: Select IRQC in case of the r8a7791 SoC
>       ARM: shmobile: r8a7791 PFC platform device support
>       ARM: shmobile: Select GPIO in case of the r8a7791 SoC
>       ARM: shmobile: r8a7791 GPIO platform device support
>       ARM: shmobile: Select GPIO in case of the r7s72100 SoC
>       ARM: shmobile: Enable MTU2 on r7s72100
>       ARM: shmobile: Add shared EMEV2 code for ->init_machine()
>       ARM: shmobile: Use ->init_late() in shared EMEV2 case
>       ARM: shmobile: Remove legacy KZM9D board code
>       ARM: shmobile: Remove legacy platform devices from EMEV2 SoC code
>       ARM: shmobile: Select USE_OF on EMEV2
>       ARM: shmobile: Add r8a7790 clocks for thermal devices
>       ARM: shmobile: Add r8a7791 thermal platform device
>       ARM: shmobile: Add r8a7791 clocks for thermal devices
> 
> Simon Horman (2):
>       ARM: shmobile: Select AUTO_ZRELADDR for EMEV2
>       ARM: shmobile: r8a7779: add HSPI clock support for DT
> 
> Valentine Barshak (1):
>       ARM: shmobile: r8a7790: Add USBHS clock support
> 
>  arch/arm/Kconfig                              |  14 ++-
>  arch/arm/Makefile                             |   1 -
>  arch/arm/boot/compressed/Makefile             |   2 +-
>  arch/arm/boot/dts/Makefile                    |   2 +-
>  arch/arm/configs/ape6evm_defconfig            |   2 +-
>  arch/arm/configs/armadillo800eva_defconfig    |   2 +-
>  arch/arm/configs/bockw_defconfig              |   2 +-
>  arch/arm/configs/koelsch_defconfig            |   2 +-
>  arch/arm/configs/kzm9d_defconfig              |   2 +-
>  arch/arm/configs/kzm9g_defconfig              |   2 +-
>  arch/arm/configs/lager_defconfig              |   2 +-
>  arch/arm/configs/mackerel_defconfig           |   2 +-
>  arch/arm/configs/marzen_defconfig             |   2 +-
>  arch/arm/mach-shmobile/Kconfig                |  19 +--
>  arch/arm/mach-shmobile/Makefile               |   1 -
>  arch/arm/mach-shmobile/Makefile.boot          |   1 -
>  arch/arm/mach-shmobile/board-kzm9d.c          |  92 ---------------
>  arch/arm/mach-shmobile/clock-r7s72100.c       |   1 +
>  arch/arm/mach-shmobile/clock-r8a7740.c        |   1 +
>  arch/arm/mach-shmobile/clock-r8a7778.c        |  11 ++
>  arch/arm/mach-shmobile/clock-r8a7779.c        |  11 ++
>  arch/arm/mach-shmobile/clock-r8a7790.c        |  58 +++++++--
>  arch/arm/mach-shmobile/clock-r8a7791.c        |  14 ++-
>  arch/arm/mach-shmobile/include/mach/emev2.h   |   5 -
>  arch/arm/mach-shmobile/include/mach/r8a7778.h |  18 +++
>  arch/arm/mach-shmobile/include/mach/r8a7791.h |   1 +
>  arch/arm/mach-shmobile/setup-emev2.c          | 163 ++------------------------
>  arch/arm/mach-shmobile/setup-r7s72100.c       |  22 ++++
>  arch/arm/mach-shmobile/setup-r8a73a4.c        |   2 +-
>  arch/arm/mach-shmobile/setup-r8a7778.c        |  51 ++++++++
>  arch/arm/mach-shmobile/setup-r8a7791.c        |  65 ++++++++++
>  drivers/Makefile                              |   2 +-
>  32 files changed, 285 insertions(+), 290 deletions(-)
>  delete mode 100644 arch/arm/mach-shmobile/board-kzm9d.c
> 

[GIT PULL v2 00/33] Renesas ARM based SoC updates for v3.14

[Kevin Hilman]

Simon Horman <horms+renesas@verge.net.au> writes:

> Hi Kevin, Hi Olof, Hi Arnd,
>
> please consider these Renesas ARM based SoC updates for v3.14.
>
> As discussed elsewhere, this pull-request also includes defconfig changes
> related to renaming ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY. These are also
> to avoid build regressions when using defconfigs
>
> As this pull request is based on v3.12, which does not include
> genmai_defconfig, it has not been updated. Rather, I have queued up a patch
> in my defconfig to switch it to use ARCH_SHMOBILE_LEGACY.  This does
> involve breaking that defconfig. However as it is new and not in
> wide-spread use it seems better to live with that temporary breakage than
> to have soc depend on defconfig (as was the case in the previous version of
> this pull request).

OK, thanks for the detailed explanation.

> The following changes since commit 6ce4eac1f600b34f2f7f58f9cd8f0503d79e42ae:
>
>   Linux 3.13-rc1 (2013-11-22 11:30:55 -0800)
>
> are available in the git repository at:
>
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc-for-v3.14
>
> for you to fetch changes up to fee05eb3d2ce4813b5e9a70ab888d2bc0047f4e1:
>
>   ARM: shmobile: r8a7779: add HSPI clock support for DT (2013-12-10 17:20:15 +0900)
>
> ----------------------------------------------------------------
> Renesas ARM based SoC updates for v3.14
>
> * Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY
>
> * r8a7791 SoC (R-Car M2)
>   - Add thermal platform device
>   - Add DU and LVDS clocks
>   - GPIO platform device support
>   - PFC platform device support
>   - Select IRQC
>
> * r8a7790 SoC (R-Car H2)
>   - Tidyup clock table order
>   - Fixup I2C clock source
>   - Correct EXTAL divider settings
>   - Add clocks for thermal devices and SSI
>
> * r8a7779 SoC (R-Car H1)
>   - Add I2C clock for DT
>
> * r8a7778 SoC (R-Car M1)
>   - Add HSPI clocks for DT
>   - Add I2C clock for DT
>   - Add HPBIFx DMAEngine support
>
> * r8a7740 SoC (R-Mobile A1)
>   - Add FSI clocks for DT
>
> * emev2 SoC (Emma Mobile)
>   - Move to Multi-platform
>   - Remove legacy board code
>
> * r7s72100 SoC (RZ/A1H)
>   - Select GPIO
>
> * r8a73a4 SoC (R-Mobile APE6)
>   - Don't used named IRC for DMAEngine
>
> ----------------------------------------------------------------

Pulled into next/soc.

Kevin