From: jsarha@ti.com (Jyri Sarha)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio
Date: Mon, 27 Jan 2014 17:37:49 +0200 [thread overview]
Message-ID: <cover.1390836773.git.jsarha@ti.com> (raw)
In-Reply-To: <y>
Changes since RFC v2 version of the patches:
- Dropped out already applied:
ASoC: hdmi-codec: Add devicetree binding with documentation
- Addresses Mark's comments here:
http://mailman.alsa-project.org/pipermail/alsa-devel/2013-December/070605.html
- ASoC: davinci-evm: Add named clock reference to DT bindings
- Get rid of unnecessary castings
- Add mclk NULL checks
- Use devm_clk_get()
- Change clock name from "ti,codec-clock" to "mclk"
- Address Mark's comments here:
http://mailman.alsa-project.org/pipermail/alsa-devel/2013-December/070606.html - ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus
- Get rid of unnecessary castings
- Update commit message
- Add: ASoC: davinci-mcasp: Set BCLK divider if McASP is BCLK master
- Use snd_soc_params_to_bclk()
Changes since the first RFC version of the patches:
- Drop out already applied:
ASoC: hdmi-codec: Add SNDRV_PCM_FMTBIT_32_LE playback format
- Change sound node's compatible property
form: "ti,am33xx-beaglebone-black" to "ti,am33xx-beaglebone-black-audio"
- Some minor style issue fixes from TI internal review
Jyri Sarha (8):
clk: add gpio controlled clock
ASoC: davinci-evm: Add named clock reference to DT bindings
ASoC: davinci-mcasp: Set BCLK divider if McASP is BCLK master
ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S
bus
ASoC: davinci: HDMI audio build for AM33XX and TDA998x
drm/tilcdc: Add I2C HDMI audio config for tda998x
ARM: OMAP2+: omap2plus_defconfig: Enable tilcdc and TDA998X HDMI
support
ARM: OMAP2+: omap2plus_defconfig: Enable BeagleBone Black HDMI audio
support
.../devicetree/bindings/clock/gpio-clock.txt | 21 ++
.../bindings/sound/davinci-evm-audio.txt | 13 +-
arch/arm/configs/omap2plus_defconfig | 5 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-gpio.c | 210 +++++++++++++++++++
drivers/gpu/drm/tilcdc/tilcdc_slave.c | 24 ++-
include/linux/clk-provider.h | 25 +++
sound/soc/davinci/Kconfig | 12 ++
sound/soc/davinci/Makefile | 1 +
sound/soc/davinci/davinci-evm.c | 211 +++++++++++++++++++-
sound/soc/davinci/davinci-mcasp.c | 20 ++
11 files changed, 534 insertions(+), 9 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/gpio-clock.txt
create mode 100644 drivers/clk/clk-gpio.c
--
1.7.9.5
next reply other threads:[~2014-01-27 15:37 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-27 15:37 Jyri Sarha [this message]
2014-01-27 15:37 ` [PATCH RFC v3 1/8] clk: add gpio controlled clock Jyri Sarha
2014-01-27 15:37 ` [PATCH RFC v3 2/8] ASoC: davinci-evm: Add named clock reference to DT bindings Jyri Sarha
2014-01-27 18:10 ` Mark Brown
2014-01-27 15:37 ` [PATCH RFC v3 3/8] ASoC: davinci-mcasp: Set BCLK divider if McASP is BCLK master Jyri Sarha
2014-01-27 20:46 ` Mark Brown
2014-01-27 15:37 ` [PATCH RFC v3 4/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus Jyri Sarha
2014-01-27 20:49 ` Mark Brown
2014-01-28 7:47 ` Jyri Sarha
2014-01-27 15:37 ` [PATCH RFC v3 5/8] ASoC: davinci: HDMI audio build for AM33XX and TDA998x Jyri Sarha
2014-01-27 15:37 ` [PATCH RFC v3 6/8] drm/tilcdc: Add I2C HDMI audio config for tda998x Jyri Sarha
2014-01-27 15:37 ` [PATCH RFC v3 7/8] ARM: OMAP2+: omap2plus_defconfig: Enable tilcdc and TDA998X HDMI support Jyri Sarha
2014-01-27 15:37 ` [PATCH RFC v3 8/8] ARM: OMAP2+: omap2plus_defconfig: Enable BeagleBone Black HDMI audio support Jyri Sarha
2014-01-27 15:51 ` [alsa-devel] [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio Lars-Peter Clausen
2014-01-27 16:17 ` Jyri Sarha
2014-01-27 16:32 ` Lars-Peter Clausen
2014-01-27 19:40 ` Jyri Sarha
2014-01-27 19:47 ` Lars-Peter Clausen
2014-01-27 18:06 ` Jean-Francois Moine
2014-01-27 19:31 ` Jyri Sarha
2014-01-28 9:23 ` Jean-Francois Moine
2014-01-30 12:20 ` Jyri Sarha
2014-01-30 18:00 ` Jean-Francois Moine
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1390836773.git.jsarha@ti.com \
--to=jsarha@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).