[PATCH 1/5] ARM: shmobile: lager defconfig: Enable RSPI and MTD_M25P80

[PATCH 1/5] ARM: shmobile: lager defconfig: Enable RSPI and MTD_M25P80

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

This enables support for the Spansion s25fl512s SPI FLASH on QSPI.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
[horms+renesas at verge.net.au: resolved conflict]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/configs/lager_defconfig | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/configs/lager_defconfig b/arch/arm/configs/lager_defconfig
index b17f487..5870244 100644
--- a/arch/arm/configs/lager_defconfig
+++ b/arch/arm/configs/lager_defconfig
@@ -51,6 +51,8 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_M25P80=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_SATA_RCAR=y
@@ -86,6 +88,8 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_I2C=y
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_RSPI=y
 CONFIG_GPIO_SH_PFC=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_RCAR=y
-- 
1.8.5.2

[PATCH 2/5] ARM: shmobile: Add defconfig for shmobile multiplatform

[Simon Horman]

This is intended to be a base for a defconfig to cover all
shmobile multiplatform boards. It currently includes configuration
for the following boards:

* KZM9D
* Lager
* Koelsch

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
---
 arch/arm/configs/shmobile_defconfig | 129 ++++++++++++++++++++++++++++++++++++
 1 file changed, 129 insertions(+)
 create mode 100644 arch/arm/configs/shmobile_defconfig

diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
new file mode 100644
index 0000000..83b0725
--- /dev/null
+++ b/arch/arm/configs/shmobile_defconfig
@@ -0,0 +1,129 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_EMEV2=y
+CONFIG_ARCH_R8A7790=y
+CONFIG_ARCH_R8A7791=y
+CONFIG_MACH_KOELSCH=y
+CONFIG_MACH_LAGER=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_CPU_BPREDICT_DISABLE=y
+CONFIG_PL310_ERRATA_588369=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_PCI=y
+CONFIG_PCI_RCAR_GEN2=y
+CONFIG_SMP=y
+CONFIG_SCHED_MC=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_NR_CPUS=8
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_KEXEC=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_M25P80=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_SATA_RCAR=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_SH_ETH=y
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_EM=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=20
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_RSPI=y
+CONFIG_GPIO_EM=y
+CONFIG_GPIO_RCAR=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_RCAR_THERMAL=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_PLATFORM=y
+CONFIG_VIDEO_RCAR_VIN=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ADV7180=y
+CONFIG_DRM=y
+CONFIG_DRM_RCAR_DU=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_RCAR=y
+CONFIG_USB_RCAR_GEN2_PHY=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_SH_MMCIF=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_SH_DMAE=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ARM_UNWIND is not set
-- 
1.8.5.2

[GIT PULL] Third Round of Renesas ARM Based SoC Defconfig Updates for v3.15

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider this third round of Renesas ARM based SoC defconfig
updates for v3.15.

This pull request is based on the previous round of
such requests, tagged as renesas-defconfig2-for-v3.15,
which I have already sent a pull-request for.


The following changes since commit 8f33d31ee270f2a6bcc661815a520f76565674c3:

  ARM: shmobile: genmai defconfig: Enable RSPI (2014-02-06 20:53:59 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-defconfig3-for-v3.15

for you to fetch changes up to 7573e89ba1fcbe492c52d5b1e72fcf5d23da21d1:

  ARM: shmobile: r7s72100: update defconfig for I2C usage (2014-02-18 11:36:33 +0900)

----------------------------------------------------------------
Third Round of Renesas ARM Based SoC Defconfig Updates for v3.15

* r7s72100 (RZ/A1H) based Genmai board
  - update defconfig for I2C usage

* r8a7791 (R-Car M2) based Koelsch board
  - Enable SDHI, GPIO and regulators in defconfig

* r8a7790 (R-Car H2) based Lager board
  - Enable RSPI and MTD_M25P80

* emev2 (Emma Mobile) based KZM9D board
  - Remove legacy KZM9D defconfig

* Multiplatform
  - Add defconfig for shmobile multiplatform

----------------------------------------------------------------
Geert Uytterhoeven (1):
      ARM: shmobile: lager defconfig: Enable RSPI and MTD_M25P80

Magnus Damm (1):
      ARM: shmobile: Get rid of legacy KZM9D defconfig

Simon Horman (2):
      ARM: shmobile: Add defconfig for shmobile multiplatform
      ARM: shmobile: koelsch: Enable SDHI, GPIO and regulators in defconfig

Wolfram Sang (1):
      ARM: shmobile: r7s72100: update defconfig for I2C usage

 arch/arm/configs/genmai_defconfig   |   4 +-
 arch/arm/configs/koelsch_defconfig  |   9 +++
 arch/arm/configs/kzm9d_defconfig    |  91 -------------------------
 arch/arm/configs/lager_defconfig    |   4 ++
 arch/arm/configs/shmobile_defconfig | 129 ++++++++++++++++++++++++++++++++++++
 5 files changed, 145 insertions(+), 92 deletions(-)
 delete mode 100644 arch/arm/configs/kzm9d_defconfig
 create mode 100644 arch/arm/configs/shmobile_defconfig

[PATCH 3/5] ARM: shmobile: Get rid of legacy KZM9D defconfig

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Get rid of the kzm9d_defconfig. The KZM9D is now supported
as DT only in case of EMEV2 is selected in the kernel
configuration.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/configs/kzm9d_defconfig | 91 ----------------------------------------
 1 file changed, 91 deletions(-)
 delete mode 100644 arch/arm/configs/kzm9d_defconfig

diff --git a/arch/arm/configs/kzm9d_defconfig b/arch/arm/configs/kzm9d_defconfig
deleted file mode 100644
index 1cc330b..0000000
--- a/arch/arm/configs/kzm9d_defconfig
+++ /dev/null
@@ -1,91 +0,0 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_EMEV2=y
-CONFIG_MACH_KZM9D=y
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x10000000
-# CONFIG_SH_TIMER_TMU is not set
-# CONFIG_SWP_EMULATE is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
-# CONFIG_LOCAL_TIMERS is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_BLK_DEV is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EM=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_EM=y
-# CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_FTRACE is not set
-- 
1.8.5.2

[PATCH 4/5] ARM: shmobile: koelsch: Enable SDHI, GPIO and regulators in defconfig

[Simon Horman]

Enable the following:
* regulators (needed for SDHI)
* SDHI
* GPIO
* GPIO keys
* GPIO LEDs

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/configs/koelsch_defconfig | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/configs/koelsch_defconfig b/arch/arm/configs/koelsch_defconfig
index 9561139..86faab5 100644
--- a/arch/arm/configs/koelsch_defconfig
+++ b/arch/arm/configs/koelsch_defconfig
@@ -59,6 +59,7 @@ CONFIG_SH_ETH=y
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_SH_SCI=y
@@ -68,13 +69,21 @@ CONFIG_I2C=y
 CONFIG_I2C_RCAR=y
 CONFIG_SPI=y
 CONFIG_SPI_RSPI=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_RCAR=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 CONFIG_RCAR_THERMAL=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 # CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
-- 
1.8.5.2

[PATCH 5/5] ARM: shmobile: r7s72100: update defconfig for I2C usage

[Simon Horman]

From: Wolfram Sang <wsa@sang-engineering.com>

Select the correct I2C driver and activate EEPROM support to have a
slave device for testing. Also activate i2c-dev, so i2c-tools will work.

Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/configs/genmai_defconfig | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/genmai_defconfig b/arch/arm/configs/genmai_defconfig
index 5ee6ac0..d238faf 100644
--- a/arch/arm/configs/genmai_defconfig
+++ b/arch/arm/configs/genmai_defconfig
@@ -52,6 +52,7 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_EEPROM_AT24=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_CORE is not set
 # CONFIG_NET_VENDOR_ARC is not set
@@ -80,7 +81,8 @@ CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=10
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_I2C_SH_MOBILE=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_RIIC=y
 CONFIG_SPI=y
 CONFIG_SPI_RSPI=y
 # CONFIG_HWMON is not set
-- 
1.8.5.2

[GIT PULL] Third Round of Renesas ARM Based SoC Defconfig Updates for v3.15

[Olof Johansson]

On Fri, Feb 21, 2014 at 03:12:39PM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider this third round of Renesas ARM based SoC defconfig
> updates for v3.15.
> 
> This pull request is based on the previous round of
> such requests, tagged as renesas-defconfig2-for-v3.15,
> which I have already sent a pull-request for.
> 
> 
> The following changes since commit 8f33d31ee270f2a6bcc661815a520f76565674c3:
> 
>   ARM: shmobile: genmai defconfig: Enable RSPI (2014-02-06 20:53:59 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-defconfig3-for-v3.15

Merged, thanks.


-Olof