From mboxrd@z Thu Jan 1 00:00:00 1970 From: stefan@agner.ch (Stefan Agner) Date: Tue, 15 Jul 2014 14:56:17 +0200 Subject: [PATCH v3 0/4] ARM: vf610: add FlexCAN support Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This series adds support for Vybrid (aka vf610) to the FlexCAN controller and extends the device tree accordingly. Changes in v3: - Return error number in flexcan_get_berr_counter if clock enabling fails - Add the FLEXCANX_EN clocks as new clocks Changes in v2: - Split out patch (seperate dt, clocks and driver changes) - Use spaces for hardware feature flags table - Remove drive-by change of esdhc register length - Added related fix which enables clock in berr_counter Stefan Agner (4): ARM: dts: vf610: add FlexCAN node ARM: imx: clk-vf610: fix FlexCAN clock gating can: flexcan: switch on clocks before accessing ecr register can: flexcan: add vf610 support for FlexCAN arch/arm/boot/dts/vf610.dtsi | 23 +++++++++ arch/arm/mach-imx/clk-vf610.c | 6 ++- drivers/net/can/flexcan.c | 91 +++++++++++++++++++++++++++++---- include/dt-bindings/clock/vf610-clock.h | 4 +- 4 files changed, 110 insertions(+), 14 deletions(-) -- 2.0.1