* [PATCH 01/12] ARM: shmobile: r8a7791: add VIN DT support
2014-08-20 0:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v3.18 Simon Horman
@ 2014-08-20 0:23 ` Simon Horman
2014-08-20 0:23 ` [PATCH 02/12] ARM: shmobile: henninger: add VIN0/ADV7180 " Simon Horman
` (10 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2014-08-20 0:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the generic R8A7791 parts of the VIN[0-2] device nodes. Add aliases for
the VIN[0-2] device nodes.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 0d82a4b..0f28921 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -34,6 +34,9 @@
spi1 = &msiof0;
spi2 = &msiof1;
spi3 = &msiof2;
+ vin0 = &vin0;
+ vin1 = &vin1;
+ vin2 = &vin2;
};
cpus {
@@ -518,6 +521,30 @@
status = "disabled";
};
+ vin0: video at e6ef0000 {
+ compatible = "renesas,vin-r8a7791";
+ clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin1: video at e6ef1000 {
+ compatible = "renesas,vin-r8a7791";
+ clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin2: video at e6ef2000 {
+ compatible = "renesas,vin-r8a7791";
+ clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
--
2.0.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 02/12] ARM: shmobile: henninger: add VIN0/ADV7180 DT support
2014-08-20 0:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v3.18 Simon Horman
2014-08-20 0:23 ` [PATCH 01/12] ARM: shmobile: r8a7791: add VIN DT support Simon Horman
@ 2014-08-20 0:23 ` Simon Horman
2014-08-20 0:23 ` [PATCH 03/12] ARM: shmobile: koelsch: add VIN1/ADV7180 " Simon Horman
` (9 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2014-08-20 0:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the Henninger board dependent part of the VIN0 device node. Add the
device node for Analog Devices ADV7180 video decoder to I2C2 bus. Add the
necessary subnodes to interconnect VIN0 and ADV7180 devices.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791-henninger.dts | 35 +++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
index 3a2ef0a..f1b56de 100644
--- a/arch/arm/boot/dts/r8a7791-henninger.dts
+++ b/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -135,6 +135,11 @@
renesas,groups = "usb1";
renesas,function = "usb1";
};
+
+ vin0_pins: vin0 {
+ renesas,groups = "vin0_data8", "vin0_clk";
+ renesas,function = "vin0";
+ };
};
&scif0 {
@@ -191,6 +196,19 @@
status = "okay";
clock-frequency = <400000>;
+
+ composite-in at 20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin0>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin0ep>;
+ };
+ };
+ };
};
&qspi {
@@ -260,3 +278,20 @@
&pciec {
status = "okay";
};
+
+/* composite video input */
+&vin0 {
+ status = "ok";
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin0ep: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
--
2.0.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 03/12] ARM: shmobile: koelsch: add VIN1/ADV7180 DT support
2014-08-20 0:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v3.18 Simon Horman
2014-08-20 0:23 ` [PATCH 01/12] ARM: shmobile: r8a7791: add VIN DT support Simon Horman
2014-08-20 0:23 ` [PATCH 02/12] ARM: shmobile: henninger: add VIN0/ADV7180 " Simon Horman
@ 2014-08-20 0:23 ` Simon Horman
2014-08-20 0:23 ` [PATCH 04/12] ARM: shmobile: r8a7790: Add DMAC clocks to DT Simon Horman
` (8 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2014-08-20 0:23 UTC (permalink / raw)
To: linux-arm-kernel
From: "sergei.shtylyov@cogentembedded.com" <sergei.shtylyov@cogentembedded.com>
Define the Koelsch board dependent part of the VIN1 device node. Add the device
node for Analog Devices ADV7180 video decoder to I2C2 bus. Add the necessary
subnodes to interconnect VIN1 and ADV7180 devices.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 23486c0..6be43da 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -289,6 +289,11 @@
renesas,groups = "usb1";
renesas,function = "usb1";
};
+
+ vin1_pins: vin1 {
+ renesas,groups = "vin1_data8", "vin1_clk";
+ renesas,function = "vin1";
+ };
};
ðer {
@@ -412,6 +417,19 @@
status = "okay";
clock-frequency = <400000>;
+ composite-in at 20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin1>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep>;
+ };
+ };
+ };
+
eeprom at 50 {
compatible = "renesas,24c02";
reg = <0x50>;
@@ -459,3 +477,20 @@
&cpu0 {
cpu0-supply = <&vdd_dvfs>;
};
+
+/* composite video input */
+&vin1 {
+ status = "ok";
+ pinctrl-0 = <&vin1_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin1ep: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
--
2.0.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 04/12] ARM: shmobile: r8a7790: Add DMAC clocks to DT
2014-08-20 0:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v3.18 Simon Horman
` (2 preceding siblings ...)
2014-08-20 0:23 ` [PATCH 03/12] ARM: shmobile: koelsch: add VIN1/ADV7180 " Simon Horman
@ 2014-08-20 0:23 ` Simon Horman
2014-08-20 0:23 ` [PATCH 05/12] ARM: shmobile: r8a7790: Add DMAC devices " Simon Horman
` (7 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2014-08-20 0:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add the SYS-DMAC0 and SYS-DMAC1 clocks to the MSTP2 clock node. They
will be used by the upcoming DMAC DT nodes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index d9ddecb..220662f 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -758,16 +758,19 @@
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
- <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>,
+ <&zs_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0
R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1
R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2
+ R8A7790_CLK_SYS_DMAC1 R8A7790_CLK_SYS_DMAC0
>;
clock-output-names =
"scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
- "scifb1", "msiof1", "msiof3", "scifb2";
+ "scifb1", "msiof1", "msiof3", "scifb2",
+ "sys-dmac1", "sys-dmac0";
};
mstp3_clks: mstp3_clks at e615013c {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
--
2.0.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 05/12] ARM: shmobile: r8a7790: Add DMAC devices to DT
2014-08-20 0:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v3.18 Simon Horman
` (3 preceding siblings ...)
2014-08-20 0:23 ` [PATCH 04/12] ARM: shmobile: r8a7790: Add DMAC clocks to DT Simon Horman
@ 2014-08-20 0:23 ` Simon Horman
2014-08-20 0:23 ` [PATCH 06/12] ARM: shmobile: r8a7791: " Simon Horman
` (6 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2014-08-20 0:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Instantiate the two system DMA controllers in the r8a7790 device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 59 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 220662f..3707f0e 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -217,6 +217,65 @@
<0 3 IRQ_TYPE_LEVEL_HIGH>;
};
+ dmac0: dma-controller at e6700000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller at e6720000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
i2c0: i2c at e6508000 {
#address-cells = <1>;
#size-cells = <0>;
--
2.0.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 06/12] ARM: shmobile: r8a7791: Add DMAC devices to DT
2014-08-20 0:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v3.18 Simon Horman
` (4 preceding siblings ...)
2014-08-20 0:23 ` [PATCH 05/12] ARM: shmobile: r8a7790: Add DMAC devices " Simon Horman
@ 2014-08-20 0:23 ` Simon Horman
2014-08-20 0:23 ` [PATCH 07/12] ARM: shmobile: r8a7791 dtsi: Enable DMA for QSPI Simon Horman
` (5 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2014-08-20 0:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Instantiate the two system DMA controllers in the r8a7791 device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 0f28921..146ed64 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -209,6 +209,66 @@
<0 17 IRQ_TYPE_LEVEL_HIGH>;
};
+ dmac0: dma-controller at e6700000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller at e6720000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
/* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c at e6508000 {
#address-cells = <1>;
--
2.0.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT Updates for v3.18
@ 2014-08-20 0:23 Simon Horman
2014-08-20 0:23 ` [PATCH 01/12] ARM: shmobile: r8a7791: add VIN DT support Simon Horman
` (11 more replies)
0 siblings, 12 replies; 13+ messages in thread
From: Simon Horman @ 2014-08-20 0:23 UTC (permalink / raw)
To: linux-arm-kernel
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these Renesas ARM based SoC DT updates for v3.18.
The following changes since commit 7d1311b93e58ed55f3a31cc8f94c4b8fe988a2b9:
Linux 3.17-rc1 (2014-08-16 10:40:26 -0600)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v3.18
for you to fetch changes up to d594c9775409a4276133db5e34dbd791329c5eae:
ARM: shmobile: lager: add VIN1/ADV7180 device nodes (2014-08-17 09:44:07 +0900)
----------------------------------------------------------------
Renesas ARM Based SoC DT Updates for v3.18
* Add VIN support to lager/r8a7790, koelsch/r8a7791 and henninger/r8a7791
* Enable DMA for MSIOF and QSPI on r8a7790 and r8a7791
----------------------------------------------------------------
Ben Dooks (2):
ARM: shmobile: r8a7790: add VIN device nodes
ARM: shmobile: lager: add VIN1/ADV7180 device nodes
Geert Uytterhoeven (4):
ARM: shmobile: r8a7791 dtsi: Enable DMA for QSPI
ARM: shmobile: r8a7791 dtsi: Enable DMA for MSIOF
ARM: shmobile: r8a7790 dtsi: Enable DMA for QSPI
ARM: shmobile: r8a7790 dtsi: Enable DMA for MSIOF
Laurent Pinchart (3):
ARM: shmobile: r8a7790: Add DMAC clocks to DT
ARM: shmobile: r8a7790: Add DMAC devices to DT
ARM: shmobile: r8a7791: Add DMAC devices to DT
Sergei Shtylyov (2):
ARM: shmobile: r8a7791: add VIN DT support
ARM: shmobile: henninger: add VIN0/ADV7180 DT support
sergei.shtylyov at cogentembedded.com (1):
ARM: shmobile: koelsch: add VIN1/ADV7180 DT support
arch/arm/boot/dts/r8a7790-lager.dts | 36 ++++++++++
arch/arm/boot/dts/r8a7790.dtsi | 120 ++++++++++++++++++++++++++++++--
arch/arm/boot/dts/r8a7791-henninger.dts | 35 ++++++++++
arch/arm/boot/dts/r8a7791-koelsch.dts | 35 ++++++++++
arch/arm/boot/dts/r8a7791.dtsi | 101 ++++++++++++++++++++++++++-
5 files changed, 318 insertions(+), 9 deletions(-)
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 07/12] ARM: shmobile: r8a7791 dtsi: Enable DMA for QSPI
2014-08-20 0:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v3.18 Simon Horman
` (5 preceding siblings ...)
2014-08-20 0:23 ` [PATCH 06/12] ARM: shmobile: r8a7791: " Simon Horman
@ 2014-08-20 0:23 ` Simon Horman
2014-08-20 0:23 ` [PATCH 08/12] ARM: shmobile: r8a7791 dtsi: Enable DMA for MSIOF Simon Horman
` (4 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2014-08-20 0:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a DMA property to the QSPI node
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 146ed64..ab55efd 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1012,6 +1012,8 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+ dma-names = "tx", "rx";
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
--
2.0.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 08/12] ARM: shmobile: r8a7791 dtsi: Enable DMA for MSIOF
2014-08-20 0:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v3.18 Simon Horman
` (6 preceding siblings ...)
2014-08-20 0:23 ` [PATCH 07/12] ARM: shmobile: r8a7791 dtsi: Enable DMA for QSPI Simon Horman
@ 2014-08-20 0:23 ` Simon Horman
2014-08-20 0:24 ` [PATCH 09/12] ARM: shmobile: r8a7790 dtsi: Enable DMA for QSPI Simon Horman
` (3 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2014-08-20 0:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add register sets used for access by the DMA engine, and DMA properties to
the MSIOF nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index ab55efd..f26226e 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1022,9 +1022,11 @@
msiof0: spi at e6e20000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e20000 0 0x0064>;
+ reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1032,9 +1034,11 @@
msiof1: spi at e6e10000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e10000 0 0x0064>;
+ reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1042,9 +1046,11 @@
msiof2: spi at e6e00000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e00000 0 0x0064>;
+ reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
--
2.0.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 09/12] ARM: shmobile: r8a7790 dtsi: Enable DMA for QSPI
2014-08-20 0:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v3.18 Simon Horman
` (7 preceding siblings ...)
2014-08-20 0:23 ` [PATCH 08/12] ARM: shmobile: r8a7791 dtsi: Enable DMA for MSIOF Simon Horman
@ 2014-08-20 0:24 ` Simon Horman
2014-08-20 0:24 ` [PATCH 10/12] ARM: shmobile: r8a7790 dtsi: Enable DMA for MSIOF Simon Horman
` (2 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2014-08-20 0:24 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a DMA property to the QSPI node
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 3707f0e..6dc328d 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -946,6 +946,8 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+ dma-names = "tx", "rx";
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
--
2.0.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 10/12] ARM: shmobile: r8a7790 dtsi: Enable DMA for MSIOF
2014-08-20 0:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v3.18 Simon Horman
` (8 preceding siblings ...)
2014-08-20 0:24 ` [PATCH 09/12] ARM: shmobile: r8a7790 dtsi: Enable DMA for QSPI Simon Horman
@ 2014-08-20 0:24 ` Simon Horman
2014-08-20 0:24 ` [PATCH 11/12] ARM: shmobile: r8a7790: add VIN device nodes Simon Horman
2014-08-20 0:24 ` [PATCH 12/12] ARM: shmobile: lager: add VIN1/ADV7180 " Simon Horman
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2014-08-20 0:24 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add register sets used for access by the DMA engine, and DMA properties to
the MSIOF nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 6dc328d..60f8551 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -956,9 +956,11 @@
msiof0: spi at e6e20000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e20000 0 0x0064>;
+ reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -966,9 +968,11 @@
msiof1: spi at e6e10000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e10000 0 0x0064>;
+ reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -976,9 +980,11 @@
msiof2: spi at e6e00000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e00000 0 0x0064>;
+ reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -986,9 +992,11 @@
msiof3: spi at e6c90000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6c90000 0 0x0064>;
+ reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>;
interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
+ dmas = <&dmac0 0x45>, <&dmac0 0x46>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
--
2.0.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 11/12] ARM: shmobile: r8a7790: add VIN device nodes
2014-08-20 0:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v3.18 Simon Horman
` (9 preceding siblings ...)
2014-08-20 0:24 ` [PATCH 10/12] ARM: shmobile: r8a7790 dtsi: Enable DMA for MSIOF Simon Horman
@ 2014-08-20 0:24 ` Simon Horman
2014-08-20 0:24 ` [PATCH 12/12] ARM: shmobile: lager: add VIN1/ADV7180 " Simon Horman
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2014-08-20 0:24 UTC (permalink / raw)
To: linux-arm-kernel
From: Ben Dooks <ben.dooks@codethink.co.uk>
Add device nodes for the four video input controllers on the R8A7790.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[Sergei: renamed VIN device nodes, edited changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 60f8551..2278bd0 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -33,6 +33,10 @@
spi2 = &msiof1;
spi3 = &msiof2;
spi4 = &msiof3;
+ vin0 = &vin0;
+ vin1 = &vin1;
+ vin2 = &vin2;
+ vin3 = &vin3;
};
cpus {
@@ -532,6 +536,38 @@
status = "disabled";
};
+ vin0: video at e6ef0000 {
+ compatible = "renesas,vin-r8a7790";
+ clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin1: video at e6ef1000 {
+ compatible = "renesas,vin-r8a7790";
+ clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin2: video at e6ef2000 {
+ compatible = "renesas,vin-r8a7790";
+ clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin3: video at e6ef3000 {
+ compatible = "renesas,vin-r8a7790";
+ clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
+ reg = <0 0xe6ef3000 0 0x1000>;
+ interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
--
2.0.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 12/12] ARM: shmobile: lager: add VIN1/ADV7180 device nodes
2014-08-20 0:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v3.18 Simon Horman
` (10 preceding siblings ...)
2014-08-20 0:24 ` [PATCH 11/12] ARM: shmobile: r8a7790: add VIN device nodes Simon Horman
@ 2014-08-20 0:24 ` Simon Horman
11 siblings, 0 replies; 13+ messages in thread
From: Simon Horman @ 2014-08-20 0:24 UTC (permalink / raw)
To: linux-arm-kernel
From: Ben Dooks <ben.dooks@codethink.co.uk>
Add the Lager board specific device node part for VIN1 (composite video in);
add the device node for Analog Devices ADV7180 video decoder to IIC2 bus.
Add the necessary subnodes to interconnect VIN1 and ADV7180 devices.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[Sergei: rebased, edited changelog and summary]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790-lager.dts | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 856b423..b5f56bc 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -234,6 +234,11 @@
renesas,groups = "usb2";
renesas,function = "usb2";
};
+
+ vin1_pins: vin {
+ renesas,groups = "vin1_data8", "vin1_clk";
+ renesas,function = "vin1";
+ };
};
ðer {
@@ -366,6 +371,19 @@
status = "ok";
pinctrl-0 = <&iic2_pins>;
pinctrl-names = "default";
+
+ composite-in at 20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin1>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep0>;
+ };
+ };
+ };
};
&iic3 {
@@ -401,3 +419,21 @@
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
};
+
+/* composite video input */
+&vin1 {
+ pinctrl-0 = <&vin1_pins>;
+ pinctrl-names = "default";
+
+ status = "ok";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin1ep0: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
--
2.0.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
end of thread, other threads:[~2014-08-20 0:24 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-08-20 0:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v3.18 Simon Horman
2014-08-20 0:23 ` [PATCH 01/12] ARM: shmobile: r8a7791: add VIN DT support Simon Horman
2014-08-20 0:23 ` [PATCH 02/12] ARM: shmobile: henninger: add VIN0/ADV7180 " Simon Horman
2014-08-20 0:23 ` [PATCH 03/12] ARM: shmobile: koelsch: add VIN1/ADV7180 " Simon Horman
2014-08-20 0:23 ` [PATCH 04/12] ARM: shmobile: r8a7790: Add DMAC clocks to DT Simon Horman
2014-08-20 0:23 ` [PATCH 05/12] ARM: shmobile: r8a7790: Add DMAC devices " Simon Horman
2014-08-20 0:23 ` [PATCH 06/12] ARM: shmobile: r8a7791: " Simon Horman
2014-08-20 0:23 ` [PATCH 07/12] ARM: shmobile: r8a7791 dtsi: Enable DMA for QSPI Simon Horman
2014-08-20 0:23 ` [PATCH 08/12] ARM: shmobile: r8a7791 dtsi: Enable DMA for MSIOF Simon Horman
2014-08-20 0:24 ` [PATCH 09/12] ARM: shmobile: r8a7790 dtsi: Enable DMA for QSPI Simon Horman
2014-08-20 0:24 ` [PATCH 10/12] ARM: shmobile: r8a7790 dtsi: Enable DMA for MSIOF Simon Horman
2014-08-20 0:24 ` [PATCH 11/12] ARM: shmobile: r8a7790: add VIN device nodes Simon Horman
2014-08-20 0:24 ` [PATCH 12/12] ARM: shmobile: lager: add VIN1/ADV7180 " Simon Horman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).