From: joshc@codeaurora.org (Josh Cartwright)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/3] watchdog: add support for QCOM WDT
Date: Tue, 23 Sep 2014 18:04:35 -0500 [thread overview]
Message-ID: <cover.1411513109.git.joshc@codeaurora.org> (raw)
This patchset provides support for the Watchdog Timer (WDT) found in the Krait
Processor Sub-system (KPSS) of the MSM8960, APQ8064, and IPQ8064 chips.
This driver is implemented ontop of WATCHDOG_CORE, and therefore its primary
interface is through userspace. The implemantion is currently very basic (i.e.
it doesn't support PRETIMEOUT, even though it could be implemented through the
WDT's BARK functionality). It should also be fairly easy to extend this driver
in the future to support newer chipsets as well.
Patch 3 also extends the driver to also register a restart_notifier, making it
possible for the WDT to act as a restart mechanism if more favorable mechanisms
don't work. This is important for some boards which don't support PS_HOLD,
like the IPQ8064-based AP148 board.
Changes since v1:
- Make use of clock API instead of using a 'clock-frequency' property
- Setup default timeout of 30 seconds when one is not specified
- Add remove() function to allow for module unloading
- Don't acquire/release watchdog lock on restart
- Don't bail completely if restart_handler registration fails
Josh Cartwright (3):
watchdog: qcom: add support for KPSS WDT
watchdog: qcom: document device tree bindings
watchdog: qcom: register a restart notifier
.../devicetree/bindings/watchdog/qcom-wdt.txt | 22 +++
drivers/watchdog/Kconfig | 13 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/qcom-wdt.c | 204 +++++++++++++++++++++
4 files changed, 240 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/qcom-wdt.txt
create mode 100644 drivers/watchdog/qcom-wdt.c
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
next reply other threads:[~2014-09-23 23:04 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-23 23:04 Josh Cartwright [this message]
2014-09-23 23:04 ` [PATCH v2 1/3] watchdog: qcom: add support for KPSS WDT Josh Cartwright
2014-09-24 15:58 ` Guenter Roeck
2014-09-24 18:30 ` Josh Cartwright
2014-09-23 23:04 ` [PATCH v2 2/3] watchdog: qcom: document device tree bindings Josh Cartwright
2014-09-24 10:44 ` Arnd Bergmann
2014-09-24 10:56 ` Mark Rutland
2014-09-23 23:04 ` [PATCH v2 3/3] watchdog: qcom: register a restart notifier Josh Cartwright
2014-09-24 17:05 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1411513109.git.joshc@codeaurora.org \
--to=joshc@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).