[PATCH 01/29] ARM: shmobile: r8a7794: Add VIN clock to device tree

[PATCH 01/29] ARM: shmobile: r8a7794: Add VIN clock to device tree

[Simon Horman]

From: Koji Matsuoka <koji.matsuoka.xm@renesas.com>

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi            | 6 +++---
 include/dt-bindings/clock/r8a7794-clock.h | 2 ++
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 088e79c..95f656d 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -517,13 +517,13 @@
 		mstp8_clks: mstp8_clks at e6150990 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&p_clk>;
+			clocks = <&zg_clk>, <&zg_clk>, <&p_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
-				R8A7794_CLK_ETHER
+				R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 R8A7794_CLK_ETHER
 			>;
 			clock-output-names =
-				"ether";
+				"vin1", "vin0", "ether";
 		};
 		mstp11_clks: mstp11_clks at e615099c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index 9ac1043..fd7cdee 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -61,6 +61,8 @@
 #define R8A7794_CLK_SCIF0		21
 
 /* MSTP8 */
+#define R8A7794_CLK_VIN1		10
+#define R8A7794_CLK_VIN0		11
 #define R8A7794_CLK_ETHER		13
 
 /* MSTP9 */
-- 
2.1.1

[PATCH 02/29] ARM: shmobile: r8a7790: Add Audio DMAC devices to DT

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Instantiate the two Audio DMA controllers in the r8a7790 device tree.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[geert: corrected spelling of audmac1]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi            | 64 +++++++++++++++++++++++++++++--
 include/dt-bindings/clock/r8a7790-clock.h |  2 +
 2 files changed, 63 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 52c2156..2e01d49 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -312,6 +312,63 @@
 		#dma-cells = <1>;
 		dma-channels = <15>;
 	};
+
+	audma0: dma-controller at ec700000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xec700000 0 0x10000>;
+		interrupts =	<0 346 IRQ_TYPE_LEVEL_HIGH
+				 0 320 IRQ_TYPE_LEVEL_HIGH
+				 0 321 IRQ_TYPE_LEVEL_HIGH
+				 0 322 IRQ_TYPE_LEVEL_HIGH
+				 0 323 IRQ_TYPE_LEVEL_HIGH
+				 0 324 IRQ_TYPE_LEVEL_HIGH
+				 0 325 IRQ_TYPE_LEVEL_HIGH
+				 0 326 IRQ_TYPE_LEVEL_HIGH
+				 0 327 IRQ_TYPE_LEVEL_HIGH
+				 0 328 IRQ_TYPE_LEVEL_HIGH
+				 0 329 IRQ_TYPE_LEVEL_HIGH
+				 0 330 IRQ_TYPE_LEVEL_HIGH
+				 0 331 IRQ_TYPE_LEVEL_HIGH
+				 0 332 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12";
+		clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
+	audma1: dma-controller at ec720000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xec720000 0 0x10000>;
+		interrupts =	<0 347 IRQ_TYPE_LEVEL_HIGH
+				 0 333 IRQ_TYPE_LEVEL_HIGH
+				 0 334 IRQ_TYPE_LEVEL_HIGH
+				 0 335 IRQ_TYPE_LEVEL_HIGH
+				 0 336 IRQ_TYPE_LEVEL_HIGH
+				 0 337 IRQ_TYPE_LEVEL_HIGH
+				 0 338 IRQ_TYPE_LEVEL_HIGH
+				 0 339 IRQ_TYPE_LEVEL_HIGH
+				 0 340 IRQ_TYPE_LEVEL_HIGH
+				 0 341 IRQ_TYPE_LEVEL_HIGH
+				 0 342 IRQ_TYPE_LEVEL_HIGH
+				 0 343 IRQ_TYPE_LEVEL_HIGH
+				 0 344 IRQ_TYPE_LEVEL_HIGH
+				 0 345 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12";
+		clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
 	i2c0: i2c at e6508000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1050,10 +1107,11 @@
 		mstp5_clks: mstp5_clks at e6150144 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
-			clocks = <&extal_clk>, <&p_clk>;
+			clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>;
 			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7790_CLK_THERMAL R8A7790_CLK_PWM>;
-			clock-output-names = "thermal", "pwm";
+			renesas,clock-indices = <R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1
+						 R8A7790_CLK_THERMAL R8A7790_CLK_PWM>;
+			clock-output-names = "audmac0", "audmac1", "thermal", "pwm";
 		};
 		mstp7_clks: mstp7_clks at e615014c {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index e3a3fb8..c27b3b5 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -78,6 +78,8 @@
 #define R8A7790_CLK_USBDMAC1		31
 
 /* MSTP5 */
+#define R8A7790_CLK_AUDIO_DMAC1		1
+#define R8A7790_CLK_AUDIO_DMAC0		2
 #define R8A7790_CLK_THERMAL		22
 #define R8A7790_CLK_PWM			23
 
-- 
2.1.1

[PATCH 03/29] ARM: shmobile: r8a7791: Add Audio DMAC devices to DT

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Instantiate the two Audio DMA controllers in the r8a7791 device tree.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[geert: corrected spelling of audmac1]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi            | 63 +++++++++++++++++++++++++++++--
 include/dt-bindings/clock/r8a7791-clock.h |  2 +
 2 files changed, 62 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index a862243..b54af74 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -301,6 +301,62 @@
 		dma-channels = <15>;
 	};
 
+	audma0: dma-controller at ec700000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xec700000 0 0x10000>;
+		interrupts =	<0 346 IRQ_TYPE_LEVEL_HIGH
+				 0 320 IRQ_TYPE_LEVEL_HIGH
+				 0 321 IRQ_TYPE_LEVEL_HIGH
+				 0 322 IRQ_TYPE_LEVEL_HIGH
+				 0 323 IRQ_TYPE_LEVEL_HIGH
+				 0 324 IRQ_TYPE_LEVEL_HIGH
+				 0 325 IRQ_TYPE_LEVEL_HIGH
+				 0 326 IRQ_TYPE_LEVEL_HIGH
+				 0 327 IRQ_TYPE_LEVEL_HIGH
+				 0 328 IRQ_TYPE_LEVEL_HIGH
+				 0 329 IRQ_TYPE_LEVEL_HIGH
+				 0 330 IRQ_TYPE_LEVEL_HIGH
+				 0 331 IRQ_TYPE_LEVEL_HIGH
+				 0 332 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12";
+		clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
+	audma1: dma-controller at ec720000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xec720000 0 0x10000>;
+		interrupts =	<0 347 IRQ_TYPE_LEVEL_HIGH
+				 0 333 IRQ_TYPE_LEVEL_HIGH
+				 0 334 IRQ_TYPE_LEVEL_HIGH
+				 0 335 IRQ_TYPE_LEVEL_HIGH
+				 0 336 IRQ_TYPE_LEVEL_HIGH
+				 0 337 IRQ_TYPE_LEVEL_HIGH
+				 0 338 IRQ_TYPE_LEVEL_HIGH
+				 0 339 IRQ_TYPE_LEVEL_HIGH
+				 0 340 IRQ_TYPE_LEVEL_HIGH
+				 0 341 IRQ_TYPE_LEVEL_HIGH
+				 0 342 IRQ_TYPE_LEVEL_HIGH
+				 0 343 IRQ_TYPE_LEVEL_HIGH
+				 0 344 IRQ_TYPE_LEVEL_HIGH
+				 0 345 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12";
+		clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
 	/* The memory map in the User's Manual maps the cores to bus numbers */
 	i2c0: i2c at e6508000 {
 		#address-cells = <1>;
@@ -1053,10 +1109,11 @@
 		mstp5_clks: mstp5_clks at e6150144 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
-			clocks = <&extal_clk>, <&p_clk>;
+			clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>;
 			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7791_CLK_THERMAL R8A7791_CLK_PWM>;
-			clock-output-names = "thermal", "pwm";
+			renesas,clock-indices = <R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1
+						 R8A7791_CLK_THERMAL R8A7791_CLK_PWM>;
+			clock-output-names = "audmac0", "audmac1", "thermal", "pwm";
 		};
 		mstp7_clks: mstp7_clks at e615014c {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index dcececd..3ea2bbc 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -69,6 +69,8 @@
 #define R8A7791_CLK_USBDMAC1		31
 
 /* MSTP5 */
+#define R8A7791_CLK_AUDIO_DMAC1		1
+#define R8A7791_CLK_AUDIO_DMAC0		2
 #define R8A7791_CLK_THERMAL		22
 #define R8A7791_CLK_PWM			23
 
-- 
2.1.1

[PATCH 04/29] ARM: shmobile: r8a7790: Add Audio DMAC peri peri devices to DT

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Instantiate the Audio DMAC peri peri controllers
in the r8a7790 device tree.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 2e01d49..146f918 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -369,6 +369,13 @@
 		dma-channels = <13>;
 	};
 
+	audmapp: dma-controller at ec740000 {
+		compatible = "renesas,rcar-audmapp";
+		#dma-cells = <1>;
+
+		reg = <0 0xec740000 0 0x200>;
+	};
+
 	i2c0: i2c at e6508000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.1.1

[PATCH 05/29] ARM: shmobile: r8a7791: Add Audio DMAC peri peri devices to DT

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Instantiate the Audio DMAC peri peri controllers
in the r8a7791 device tree.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index b54af74..379e1a5 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -357,6 +357,13 @@
 		dma-channels = <13>;
 	};
 
+	audmapp: dma-controller at ec740000 {
+		compatible = "renesas,rcar-audmapp";
+		#dma-cells = <1>;
+
+		reg = <0 0xec740000 0 0x200>;
+	};
+
 	/* The memory map in the User's Manual maps the cores to bus numbers */
 	i2c0: i2c at e6508000 {
 		#address-cells = <1>;
-- 
2.1.1

[PATCH 06/29] ARM: shmobile: lager: fixup IIC2 clock frequency

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current Lager IIC2 is using default clock frequency,
but, ak4643 audio codec chip needs 100kHz
This patch clarifies IIC2 clock frequency as 100kHz.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 830f2e8..86fb2ee 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -429,6 +429,8 @@
 	pinctrl-0 = <&iic2_pins>;
 	pinctrl-names = "default";
 
+	clock-frequency = <100000>;
+
 	composite-in at 20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
-- 
2.1.1

[PATCH 07/29] ARM: shmobile: lager: Sound PIO support on DTS

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 70 +++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 86fb2ee..c2b4f65 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -9,6 +9,18 @@
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
 /dts-v1/;
 #include "r8a7790.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -146,6 +158,23 @@
 			  1800000 0>;
 	};
 
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			system-clock-frequency = <11289600>;
+		};
+	};
+
 	vga-encoder {
 		compatible = "adi,adv7123";
 
@@ -292,6 +321,16 @@
 		renesas,groups = "vin1_data8", "vin1_clk";
 		renesas,function = "vin1";
 	};
+
+	sound_pins: sound {
+		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		renesas,function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		renesas,groups = "audio_clk_a";
+		renesas,function = "audio_clk";
+	};
 };
 
 &ether {
@@ -431,6 +470,12 @@
 
 	clock-frequency = <100000>;
 
+	ak4643: sound-codec at 12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
 	composite-in at 20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -513,3 +558,28 @@
 		};
 	};
 };
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi0 {
+	pio-transfer;
+};
+
+&ssi1 {
+	pio-transfer;
+	shared-pin;
+};
-- 
2.1.1

[PATCH 08/29] ARM: shmobile: lager: Sound DMA support on DTS

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

DMA transfer to/from SSI

     DMA
[MEM] -> [SSI]

     DMA
[MEM] <- [SSI]

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index c2b4f65..93630d0 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -576,10 +576,10 @@
 };
 
 &ssi0 {
-	pio-transfer;
+	no-busif;
 };
 
 &ssi1 {
-	pio-transfer;
+	no-busif;
 	shared-pin;
 };
-- 
2.1.1

[PATCH 09/29] ARM: shmobile: lager: Sound DMA support via BUSIF on DTS

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

DMA transfer to/from SSIU

     DMA
[MEM] -> [SSIU] -> [SSI]

     DMA
[MEM] <- [SSIU] <- [SSI]

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 93630d0..0634fff 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -575,11 +575,6 @@
 	};
 };
 
-&ssi0 {
-	no-busif;
-};
-
 &ssi1 {
-	no-busif;
 	shared-pin;
 };
-- 
2.1.1

[PATCH 10/29] ARM: shmobile: lager: Sound DMA support via SRC on DTS

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

DMA transfer to/from SRC

     DMA      DMApp
[MEM] -> [SRC] -> [SSIU] -> [SSI]

     DMA      DMApp
[MEM] <- [SRC] <- [SSIU] <- [SSI]

Current sound driver is supporting
SSI/SRC random connection.
So, this patch is tring
SSI0 -> SRC2
SSI1 <- SRC3

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 0634fff..a249270 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -569,8 +569,8 @@
 
 	rcar_sound,dai {
 		dai0 {
-			playback = <&ssi0>;
-			capture  = <&ssi1>;
+			playback = <&ssi0 &src2>;
+			capture  = <&ssi1 &src3>;
 		};
 	};
 };
-- 
2.1.1

[GIT PULL v2] Second Round of Renesas ARM Based SoC DT Updates for v3.19

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these second round of Renesas ARM based SoC DT updates for
v3.19.

This pull request is based on the previous round of
such requests, tagged as renesas-dt-for-v3.19,
which I have already sent a pull-request for.

As requested by Arnd v2 of this pull request does not include some
Audio DMAC patches that were included in v1.

The following changes since commit 25af9c83151822eb6d413b4d15d5f89804606ac7:

  ARM: shmobile: r8a7779 dtsi: Add SoC-specific SATA compatible property (2014-10-30 10:01:37 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt2-for-v3.19

for you to fetch changes up to b9473d9f621b68327776b66d4b9a8ba5e0b8b4cb:

  ARM: shmobile: r8a7791: add USBDMAC{0,1} clocks to device tree (2014-11-19 09:22:13 +0900)

----------------------------------------------------------------
Second Round of Renesas ARM Based SoC DT Updates for v3.19

* Add labels for LEDs on kzm9g-reference and koelsch
* Add Sound support to r8a7790/lager and r8a7791/koelsch
* Add IIC DMA nodes to r8a7790 and r8a7791
* Use SoC-specific IIC compatible properties on sh73a0 and r8a73a4
* Add SGX, MMP and VSP1 clocks to r8a7794
* Add USBDMAC{0,1} clocks to r8a7790 and r8a7791

----------------------------------------------------------------
Geert Uytterhoeven (4):
      ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible properties
      ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible properties
      ARM: shmobile: koelsch dts: Add labels for the LEDs
      ARM: shmobile: kzm9g-reference dts: Add labels for the LEDs

Koji Matsuoka (1):
      ARM: shmobile: r8a7794: Add VIN clock to device tree

Kouei Abe (1):
      ARM: shmobile: r8a7794: Add SGX clock to device tree

Kuninori Morimoto (18):
      ARM: shmobile: r8a7790: Add Audio DMAC devices to DT
      ARM: shmobile: r8a7791: Add Audio DMAC devices to DT
      ARM: shmobile: r8a7790: Add Audio DMAC peri peri devices to DT
      ARM: shmobile: r8a7791: Add Audio DMAC peri peri devices to DT
      ARM: shmobile: lager: fixup IIC2 clock frequency
      ARM: shmobile: lager: Sound PIO support on DTS
      ARM: shmobile: lager: Sound DMA support on DTS
      ARM: shmobile: lager: Sound DMA support via BUSIF on DTS
      ARM: shmobile: lager: Sound DMA support via SRC on DTS
      ARM: shmobile: lager: Sound DMA support via DVC on DTS
      ARM: shmobile: koelsch: fixup I2C2 clock frequency
      ARM: shmobile: koelsch: Sound PIO support on DTS
      ARM: shmobile: koelsch: Sound DMA support on DTS
      ARM: shmobile: koelsch: Sound DMA support via BUSIF on DTS
      ARM: shmobile: koelsch: Sound DMA support via SRC on DTS
      ARM: shmobile: koelsch: Sound DMA support via DVC on DTS
      ARM: shmobile: lager: add Volume Ramp usage on comment
      ARM: shmobile: koelsch: add Volume Ramp usage on comment

Wolfram Sang (2):
      ARM: shmobile: r8a7790: add DMA nodes for IIC
      ARM: shmobile: r8a7791: add DMA nodes for IIC

Yoshifumi Hosoya (1):
      ARM: shmobile: r8a7794: Add MMP and VSP1 clocks to device tree

Yoshihiro Shimoda (2):
      ARM: shmobile: r8a7790: add USBDMAC{0,1} clocks to device tree
      ARM: shmobile: r8a7791: add USBDMAC{0,1} clocks to device tree

 arch/arm/boot/dts/r8a73a4.dtsi               | 18 +++---
 arch/arm/boot/dts/r8a7790-lager.dts          | 83 +++++++++++++++++++++++++++
 arch/arm/boot/dts/r8a7790.dtsi               | 86 ++++++++++++++++++++++++++--
 arch/arm/boot/dts/r8a7791-koelsch.dts        | 86 +++++++++++++++++++++++++++-
 arch/arm/boot/dts/r8a7791.dtsi               | 83 +++++++++++++++++++++++++--
 arch/arm/boot/dts/r8a7794.dtsi               | 21 ++++---
 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts |  4 ++
 arch/arm/boot/dts/sh73a0.dtsi                | 10 ++--
 include/dt-bindings/clock/r8a7790-clock.h    |  2 +
 include/dt-bindings/clock/r8a7791-clock.h    |  2 +
 include/dt-bindings/clock/r8a7794-clock.h    |  9 +++
 11 files changed, 370 insertions(+), 34 deletions(-)

[PATCH 11/29] ARM: shmobile: lager: Sound DMA support via DVC on DTS

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

DMA transfer uses DVC

     DMA               DMApp
[MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI]

     DMA               DMApp
[MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI]

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index a249270..2f91740 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -19,6 +19,13 @@
  * This command is required when Playback/Capture
  *
  *	amixer set "LINEOUT Mixer DACL" on
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
  */
 
 /dts-v1/;
@@ -569,8 +576,8 @@
 
 	rcar_sound,dai {
 		dai0 {
-			playback = <&ssi0 &src2>;
-			capture  = <&ssi1 &src3>;
+			playback = <&ssi0 &src2 &dvc0>;
+			capture  = <&ssi1 &src3 &dvc1>;
 		};
 	};
 };
-- 
2.1.1

[PATCH 12/29] ARM: shmobile: koelsch: fixup I2C2 clock frequency

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current Koelsch I2C2 has 400kHz settings,
but, ak4643 audio codec chip which is connected to I2C2 can't
work such frequency.
Fixup I2C2 clock frequency to 100kHz.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 191f32b..59e4251 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -425,7 +425,7 @@
 	pinctrl-names = "default";
 
 	status = "okay";
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	composite-in at 20 {
 		compatible = "adi,adv7180";
-- 
2.1.1

[PATCH 13/29] ARM: shmobile: koelsch: Sound PIO support on DTS

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 70 +++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 59e4251..c92d0d7 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -10,6 +10,18 @@
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
 /dts-v1/;
 #include "r8a7791.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -210,6 +222,23 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			system-clock-frequency = <11289600>;
+		};
+	};
 };
 
 &du {
@@ -300,6 +329,16 @@
 		renesas,groups = "vin1_data8", "vin1_clk";
 		renesas,function = "vin1";
 	};
+
+	sound_pins: sound {
+		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		renesas,function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		renesas,groups = "audio_clk_a";
+		renesas,function = "audio_clk";
+	};
 };
 
 &ether {
@@ -427,6 +466,12 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
+	ak4643: sound-codec at 12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
 	composite-in at 20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -513,3 +558,28 @@
 		};
 	};
 };
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi0 {
+	pio-transfer;
+};
+
+&ssi1 {
+	pio-transfer;
+	shared-pin;
+};
-- 
2.1.1

[PATCH 14/29] ARM: shmobile: koelsch: Sound DMA support on DTS

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

DMA transfer to/from SSI

     DMA
[MEM] -> [SSI]

     DMA
[MEM] <- [SSI]

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index c92d0d7..68628cf 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -576,10 +576,10 @@
 };
 
 &ssi0 {
-	pio-transfer;
+	no-busif;
 };
 
 &ssi1 {
-	pio-transfer;
+	no-busif;
 	shared-pin;
 };
-- 
2.1.1

[PATCH 15/29] ARM: shmobile: koelsch: Sound DMA support via BUSIF on DTS

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

DMA transfer to/from SSIU

     DMA
[MEM] -> [SSIU] -> [SSI]

     DMA
[MEM] <- [SSIU] <- [SSI]

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 68628cf..5bc675f 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -575,11 +575,6 @@
 	};
 };
 
-&ssi0 {
-	no-busif;
-};
-
 &ssi1 {
-	no-busif;
 	shared-pin;
 };
-- 
2.1.1

[PATCH 16/29] ARM: shmobile: koelsch: Sound DMA support via SRC on DTS

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

DMA transfer to/from SRC

     DMA      DMApp
[MEM] -> [SRC] -> [SSIU] -> [SSI]

     DMA      DMApp
[MEM] <- [SRC] <- [SSIU] <- [SSI]

Current sound driver is supporting
SSI/SRC random connection.
So, this patch is tring
SSI0 -> SRC2
SSI1 <- SRC3

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 5bc675f..d2fe677 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -569,8 +569,8 @@
 
 	rcar_sound,dai {
 		dai0 {
-			playback = <&ssi0>;
-			capture  = <&ssi1>;
+			playback = <&ssi0 &src2>;
+			capture  = <&ssi1 &src3>;
 		};
 	};
 };
-- 
2.1.1

[PATCH 17/29] ARM: shmobile: koelsch: Sound DMA support via DVC on DTS

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

DMA transfer uses DVC

     DMA               DMApp
[MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI]

     DMA               DMApp
[MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI]

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index d2fe677..f056e64 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -20,6 +20,13 @@
  * This command is required when Playback/Capture
  *
  *	amixer set "LINEOUT Mixer DACL" on
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
  */
 
 /dts-v1/;
@@ -569,8 +576,8 @@
 
 	rcar_sound,dai {
 		dai0 {
-			playback = <&ssi0 &src2>;
-			capture  = <&ssi1 &src3>;
+			playback = <&ssi0 &src2 &dvc0>;
+			capture  = <&ssi1 &src3 &dvc1>;
 		};
 	};
 };
-- 
2.1.1

[PATCH 18/29] ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible properties

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The IIC nodes used the generic compatible properties only.
This may cause the driver to fail when using Standard Speed on IIC
masters where the operational clock is driven by the 130 MHz HP clock.

Add the SoC-specific compatible property to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a73a4.dtsi | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index b5ead84..01373ee 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -106,7 +106,7 @@
 	i2c5: i2c at e60b0000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe60b0000 0 0x428>;
 		interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -205,7 +205,7 @@
 	i2c0: i2c at e6500000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6500000 0 0x428>;
 		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
@@ -214,7 +214,7 @@
 	i2c1: i2c at e6510000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6510000 0 0x428>;
 		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
@@ -223,7 +223,7 @@
 	i2c2: i2c at e6520000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6520000 0 0x428>;
 		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
@@ -232,7 +232,7 @@
 	i2c3: i2c at e6530000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6530000 0 0x428>;
 		interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
@@ -241,7 +241,7 @@
 	i2c4: i2c at e6540000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6540000 0 0x428>;
 		interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
@@ -250,7 +250,7 @@
 	i2c6: i2c at e6550000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6550000 0 0x428>;
 		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
@@ -259,7 +259,7 @@
 	i2c7: i2c at e6560000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6560000 0 0x428>;
 		interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
@@ -268,7 +268,7 @@
 	i2c8: i2c at e6570000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6570000 0 0x428>;
 		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
-- 
2.1.1

[PATCH 19/29] ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible properties

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The IIC nodes used the generic compatible properties only.
This causes the driver to fail when using Standard Speed, as the
operational clock is driven by the 104 MHz HP clock:

    i2c-sh_mobile e6820000.i2c: timing values out of range: L/H=0x208/0x1bf
    i2c-sh_mobile: probe of e6820000.i2c failed with error -22

Add the SoC-specific compatible property to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 030a592..d8def5a 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -138,7 +138,7 @@
 	i2c0: i2c at e6820000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6820000 0x425>;
 		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH
 			      0 168 IRQ_TYPE_LEVEL_HIGH
@@ -150,7 +150,7 @@
 	i2c1: i2c@e6822000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6822000 0x425>;
 		interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH
 			      0 52 IRQ_TYPE_LEVEL_HIGH
@@ -162,7 +162,7 @@
 	i2c2: i2c@e6824000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6824000 0x425>;
 		interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH
 			      0 172 IRQ_TYPE_LEVEL_HIGH
@@ -174,7 +174,7 @@
 	i2c3: i2c@e6826000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6826000 0x425>;
 		interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH
 			      0 184 IRQ_TYPE_LEVEL_HIGH
@@ -186,7 +186,7 @@
 	i2c4: i2c@e6828000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6828000 0x425>;
 		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH
 			      0 188 IRQ_TYPE_LEVEL_HIGH
-- 
2.1.1

[PATCH 20/29] ARM: shmobile: koelsch dts: Add labels for the LEDs

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The LEDs on the koelsch board are labeled using upper-case characters.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index f056e64..a10f534 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -149,12 +149,15 @@
 		compatible = "gpio-leds";
 		led6 {
 			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			label = "LED6";
 		};
 		led7 {
 			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			label = "LED7";
 		};
 		led8 {
 			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			label = "LED8";
 		};
 	};
 
-- 
2.1.1

[PATCH 21/29] ARM: shmobile: kzm9g-reference dts: Add labels for the LEDs

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The LEDs on the kzm9g board are labeled using upper-case characters.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index 0dac0e6..e59e674 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -101,15 +101,19 @@
 		compatible = "gpio-leds";
 		led1 {
 			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+			label = "LED1";
 		};
 		led2 {
 			gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+			label = "LED2";
 		};
 		led3 {
 			gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+			label = "LED3";
 		};
 		led4 {
 			gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+			label = "LED4";
 		};
 	};
 
-- 
2.1.1

[PATCH 22/29] ARM: shmobile: r8a7790: add DMA nodes for IIC

[Simon Horman]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 146f918..3afd071 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -423,6 +423,8 @@
 		reg = <0 0xe6500000 0 0x425>;
 		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
+		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -433,6 +435,8 @@
 		reg = <0 0xe6510000 0 0x425>;
 		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
+		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -443,6 +447,8 @@
 		reg = <0 0xe6520000 0 0x425>;
 		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
+		dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -453,6 +459,8 @@
 		reg = <0 0xe60b0000 0 0x425>;
 		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
+		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
-- 
2.1.1

[PATCH 23/29] ARM: shmobile: r8a7791: add DMA nodes for IIC

[Simon Horman]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 379e1a5..cfea2eca 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -434,6 +434,8 @@
 		reg = <0 0xe60b0000 0 0x425>;
 		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
+		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -444,6 +446,8 @@
 		reg = <0 0xe6500000 0 0x425>;
 		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
+		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -454,6 +458,8 @@
 		reg = <0 0xe6510000 0 0x425>;
 		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
+		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
-- 
2.1.1

[PATCH 24/29] ARM: shmobile: lager: add Volume Ramp usage on comment

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 2f91740..a235158 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -26,6 +26,15 @@
  *
  *	amixer set "DVC Out Mute" on
  *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
  */
 
 /dts-v1/;
-- 
2.1.1

[PATCH 25/29] ARM: shmobile: koelsch: add Volume Ramp usage on comment

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index a10f534..487fc99 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -27,6 +27,15 @@
  *
  *	amixer set "DVC Out Mute" on
  *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
  */
 
 /dts-v1/;
-- 
2.1.1

[PATCH 26/29] ARM: shmobile: r8a7794: Add SGX clock to device tree

[Simon Horman]

From: Kouei Abe <kouei.abe.cp@renesas.com>

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi            | 11 +++++------
 include/dt-bindings/clock/r8a7794-clock.h |  1 +
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 95f656d..b6f8f45 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -461,16 +461,15 @@
 		mstp1_clks: mstp1_clks at e6150134 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
-			clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
-				 <&cp_clk>,
-				 <&zs_clk>, <&zs_clk>, <&zs_clk>;
+			clocks = <&p_clk>, <&zg_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
+				 <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
-				R8A7794_CLK_TMU1 R8A7794_CLK_TMU3 R8A7794_CLK_TMU2
-				R8A7794_CLK_CMT0 R8A7794_CLK_TMU0
+				R8A7794_CLK_TMU1 R8A7794_CLK_3DG R8A7794_CLK_TMU3
+				R8A7794_CLK_TMU2 R8A7794_CLK_CMT0 R8A7794_CLK_TMU0
 			>;
 			clock-output-names =
-				"tmu1", "tmu3", "tmu2", "cmt0", "tmu0";
+				"tmu1", "3dg", "tmu3", "tmu2", "cmt0", "tmu0";
 		};
 		mstp2_clks: mstp2_clks at e6150138 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index fd7cdee..9066213 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -27,6 +27,7 @@
 
 /* MSTP1 */
 #define R8A7794_CLK_TMU1		11
+#define R8A7794_CLK_3DG			12
 #define R8A7794_CLK_TMU3		21
 #define R8A7794_CLK_TMU2		22
 #define R8A7794_CLK_CMT0		24
-- 
2.1.1

[PATCH 27/29] ARM: shmobile: r8a7794: Add MMP and VSP1 clocks to device tree

[Simon Horman]

From: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>

Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi            | 14 +++++++++-----
 include/dt-bindings/clock/r8a7794-clock.h |  6 ++++++
 2 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index b6f8f45..19c9de3 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -461,15 +461,19 @@
 		mstp1_clks: mstp1_clks at e6150134 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
-			clocks = <&p_clk>, <&zg_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
-				 <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
+			clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>,
+				 <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>,
+				 <&zs_clk>, <&zs_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
-				R8A7794_CLK_TMU1 R8A7794_CLK_3DG R8A7794_CLK_TMU3
-				R8A7794_CLK_TMU2 R8A7794_CLK_CMT0 R8A7794_CLK_TMU0
+				R8A7794_CLK_VCP0 R8A7794_CLK_VPC0 R8A7794_CLK_TMU1
+				R8A7794_CLK_3DG R8A7794_CLK_2DDMAC R8A7794_CLK_FDP1_0
+				R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 R8A7794_CLK_CMT0
+				R8A7794_CLK_TMU0 R8A7794_CLK_VSP1_DU0 R8A7794_CLK_VSP1_S
 			>;
 			clock-output-names =
-				"tmu1", "3dg", "tmu3", "tmu2", "cmt0", "tmu0";
+				"vcp0", "vpc0", "tmu1", "3dg", "2ddmac", "fdp1-0",
+				"tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du0", "vsps";
 		};
 		mstp2_clks: mstp2_clks at e6150138 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index 9066213..aa9c286 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -26,12 +26,18 @@
 #define R8A7794_CLK_MSIOF0		0
 
 /* MSTP1 */
+#define R8A7794_CLK_VCP0		1
+#define R8A7794_CLK_VPC0		3
 #define R8A7794_CLK_TMU1		11
 #define R8A7794_CLK_3DG			12
+#define R8A7794_CLK_2DDMAC		15
+#define R8A7794_CLK_FDP1_0		19
 #define R8A7794_CLK_TMU3		21
 #define R8A7794_CLK_TMU2		22
 #define R8A7794_CLK_CMT0		24
 #define R8A7794_CLK_TMU0		25
+#define R8A7794_CLK_VSP1_DU0		28
+#define R8A7794_CLK_VSP1_S		31
 
 /* MSTP2 */
 #define R8A7794_CLK_SCIFA2		2
-- 
2.1.1

[PATCH 28/29] ARM: shmobile: r8a7790: add USBDMAC{0, 1} clocks to device tree

[Simon Horman]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 3afd071..64f610f 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1107,17 +1107,20 @@
 			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
 			clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>,
 				 <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>,
-				 <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>;
+				 <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
+				 <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
 				R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
 				R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
 				R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1
+				R8A7790_CLK_USBDMAC0 R8A7790_CLK_USBDMAC1
 			>;
 			clock-output-names =
 				"iic2", "tpu0", "mmcif1", "sdhi3",
 				"sdhi2", "sdhi1", "sdhi0", "mmcif0",
-				"iic0", "pciec", "iic1", "ssusb", "cmt1";
+				"iic0", "pciec", "iic1", "ssusb", "cmt1",
+				"usbdmac0", "usbdmac1";
 		};
 		mstp5_clks: mstp5_clks at e6150144 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-- 
2.1.1

[PATCH 29/29] ARM: shmobile: r8a7791: add USBDMAC{0, 1} clocks to device tree

[Simon Horman]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index cfea2eca..a705d35 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1108,16 +1108,19 @@
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
 			clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
-				 <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>;
+				 <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
+				 <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
 				R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0
 				R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1
 				R8A7791_CLK_SSUSB R8A7791_CLK_CMT1
+				R8A7791_CLK_USBDMAC0 R8A7791_CLK_USBDMAC1
 			>;
 			clock-output-names =
 				"tpu0", "sdhi2", "sdhi1", "sdhi0",
-				"mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1";
+				"mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1",
+				"usbdmac0", "usbdmac1";
 		};
 		mstp5_clks: mstp5_clks at e6150144 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-- 
2.1.1

[GIT PULL v2] Second Round of Renesas ARM Based SoC DT Updates for v3.19

[Arnd Bergmann]

On Friday 21 November 2014 09:54:37 Simon Horman wrote:
> Second Round of Renesas ARM Based SoC DT Updates for v3.19
> 
> * Add labels for LEDs on kzm9g-reference and koelsch
> * Add Sound support to r8a7790/lager and r8a7791/koelsch
> * Add IIC DMA nodes to r8a7790 and r8a7791
> * Use SoC-specific IIC compatible properties on sh73a0 and r8a73a4
> * Add SGX, MMP and VSP1 clocks to r8a7794
> * Add USBDMAC{0,1} clocks to r8a7790 and r8a7791
> 
> 

Pulled into next/dt, thanks!

	Arnd