linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: andrew.jackson@arm.com (Andrew Jackson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/6] ASoC: dwc: Add device tree support to designware I2S
Date: Tue, 30 Dec 2014 10:55:42 +0000	[thread overview]
Message-ID: <cover.1419936132.git.Andrew.Jackson@arm.com> (raw)

From: Andrew Jackson <Andrew.Jackson@arm.com>

This patch set extends the DesignWare I2S driver to provide device
tree support and fixes a couple of small faults.

Changes v4->v5
  + Remove all clk_put calls [Andrew Jackson]
  + Call clk_disable_unprepare [Andrew Jackson]

Changes v3->v4
  + Drop applied patches
  + Use combined function to prepare clock [Mark Brown]
  + Use managed clock resources to avoid clk_put [Mark Brown]
  + Read configuration prameters from hardware for both platform data
    and device tree [Mark Brown]
  + Re-order patch sequence [Mark Brown]
  + Change union name to avoid future collisions [Mark Brown]
  + Check return code from clk_set_rate [Mark Brown]
  + Check parametsrs read from hardware agaist array limits and
    add further comments [Mark Brown]
  + Add of_match_ptr [Mark Brown]

Changes v2->v3
  + Drop applied patch
  + Flush FIFOs in prepare rather than hw_params [Lars-Peter Clausen]

Changes v1->v2
  + Drop negative use count patch [Mark Brown]
  + Remove unnecessary debug print messages [Lars-Peter Clausen]
  + Rewrite iteration as for loop rather than do...while [Mark Brown]
  + Reorder patches to send fixes first [Mark Brown]
  + Simplify device tree code [Mark Brown]
  + Split device tree patch in two [Mark Brown]
  + Expand explanatory comment on channel configuration [Rajeev Kumar]

Arnd: I've not forgotten about updating the spear entries and
      will submit as a separate patch.

Andrew Jackson (6):
  ASoC: dwc: Switch to managed clock resource
  ASoC: dwc: Prepare clock before use
  ASoC: dwc: Read I2S block configuration from registers
  ASoC: dwc: Register components with managed interface
  ASoC: dwc: Add documentation for I2S DT
  ASoC: dwc: Add devicetree support for Designware I2S

 .../devicetree/bindings/sound/designware-i2s.txt   |   31 +++
 sound/soc/dwc/Kconfig                              |    1 +
 sound/soc/dwc/designware_i2s.c                     |  283 ++++++++++++++++----
 3 files changed, 263 insertions(+), 52 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt

             reply	other threads:[~2014-12-30 10:55 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-30 10:55 Andrew Jackson [this message]
2014-12-30 10:55 ` [PATCH v5 1/6] ASoC: dwc: Switch to managed clock resource Andrew Jackson
2014-12-30 16:49   ` Mark Brown
2014-12-30 10:55 ` [PATCH v5 2/6] ASoC: dwc: Prepare clock before use Andrew Jackson
2014-12-30 12:39   ` Sergei Shtylyov
2014-12-30 16:51   ` Mark Brown
2014-12-30 10:55 ` [PATCH v5 3/6] ASoC: dwc: Read I2S block configuration from registers Andrew Jackson
2014-12-30 10:55 ` [PATCH v5 4/6] ASoC: dwc: Register components with managed interface Andrew Jackson
2014-12-30 10:55 ` [PATCH v5 5/6] ASoC: dwc: Add documentation for I2S DT Andrew Jackson
2014-12-30 16:52   ` Mark Brown
2014-12-30 10:55 ` [PATCH v5 6/6] ASoC: dwc: Add devicetree support for Designware I2S Andrew Jackson
2014-12-30 16:53   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1419936132.git.Andrew.Jackson@arm.com \
    --to=andrew.jackson@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).