[GIT PULL] Renesas ARM Based SoC DT Updates for v4.1

[GIT PULL] Renesas ARM Based SoC DT Updates for v4.1

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC DT updates for v4.1.


The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:

  Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.1

for you to fetch changes up to b8e8ea127d00f1b0c18d8c1ae1b8388e190d5052:

  ARM: shmobile: r8a7794: add SDHI DT support (2015-02-24 08:18:47 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC DT Updates for v4.1

* Increase hardware coverage of DT for various SoCs
* Add PFC information for emev2 SoC
* Remap entire APMU region for r8a7791 and r8a7790 SoCs
* Declare the full 512 MiB of RAM for kzm9g board
* Add selectable sources to DIV6 clocks to sh73a0 SoC
* Add missing INTCA0 clock for irqpin module on sh73a0 SoC
* Set control-parent for all irqpin node on sh73a0 SoC

----------------------------------------------------------------
Geert Uytterhoeven (7):
      ARM: shmobile: kzm9g-reference dts: Sort i2c0 children by unit address
      ARM: shmobile: kzm9g-reference dts: Add ak8975 magnetometer node
      ARM: shmobile: kzm9g-reference dts: Add adxl345 accelerometer node
      ARM: shmobile: kzm9g-reference dts: Add r2025sd rtc node
      ARM: shmobile: sh73a0 dtsi: Add missing INTCA0 clock for irqpin module
      ARM: shmobile: kzm9g dts: Declare the full 512 MiB of RAM
      ARM: shmobile: kzm9g-reference dts: Declare the full 512 MiB of RAM

Laurent Pinchart (9):
      ARM: shmobile: sh73a0 dtsi: Set control-parent for all irqpin nodes
      ARM: shmobile: kzm9g-reference dts: Add st1232 touchscreen node
      ARM: shmobile: r8a7794: Add DMAC devices to DT
      ARM: shmobile: r8a7790: Add IPMMU DT nodes
      ARM: shmobile: r8a7791: Add IPMMU DT nodes
      ARM: shmobile: r8a7794: Add IPMMU DT nodes
      ARM: shmobile: r8a7794: Add ethernet controller to device tree
      ARM: shmobile: r8a7794: alt: Enable ethernet controller
      ARM: shmobile: koelsch: Add DU HDMI output support

Niklas S?derlund (2):
      ARM: shmobile: emev2 dtsi: Add PFC information
      ARM: shmobile: emev2-kzm9d dts: Add PFC information for uart1

Sergei Shtylyov (8):
      ARM: shmobile: r8a7790: add CAN clocks
      ARM: shmobile: r8a7790: add CAN DT support
      ARM: shmobile: r8a7791: add CAN clocks
      ARM: shmobile: r8a7791: add CAN DT support
      ARM: shmobile: henninger: add CAN0 DT support
      ARM: shmobile: r8a7791: add ADSP clocks
      ARM: shmobile: r8a7790: add ADSP clocks
      ARM: shmobile: r8a7794: add SDHI DT support

Simon Horman (2):
      ARM: shmobile: r8a7794: Correct SDHI clock base address, labels and output-names
      ARM: shmobile: r8a7791: Correct SDHI clock labels and output-names

Ulrich Hecht (2):
      ARM: shmobile: r8a7740 dtsi: add remaining DIV6 clocks
      ARM: shmobile: sh73a0 dtsi: Add selectable sources to DIV6 clocks

Wolfram Sang (2):
      ARM: shmobile: r8a7790: smp: remap whole apmu region
      ARM: shmobile: r8a7791: smp: remap whole apmu region

 arch/arm/boot/dts/emev2-kzm9d.dts            |  13 +++
 arch/arm/boot/dts/emev2.dtsi                 |  10 ++
 arch/arm/boot/dts/r8a7740.dtsi               |  79 +++++++++++++-
 arch/arm/boot/dts/r8a7790.dtsi               | 102 ++++++++++++++++-
 arch/arm/boot/dts/r8a7791-henninger.dts      |  11 ++
 arch/arm/boot/dts/r8a7791-koelsch.dts        |  50 ++++++++-
 arch/arm/boot/dts/r8a7791.dtsi               | 122 +++++++++++++++++++--
 arch/arm/boot/dts/r8a7794-alt.dts            |  13 +++
 arch/arm/boot/dts/r8a7794.dtsi               | 157 ++++++++++++++++++++++++++-
 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts |  42 ++++++-
 arch/arm/boot/dts/sh73a0-kzm9g.dts           |   2 +-
 arch/arm/boot/dts/sh73a0.dtsi                |  82 ++++++++++----
 arch/arm/mach-shmobile/smp-r8a7790.c         |   4 +-
 arch/arm/mach-shmobile/smp-r8a7791.c         |   2 +-
 include/dt-bindings/clock/r8a7790-clock.h    |   3 +
 include/dt-bindings/clock/r8a7791-clock.h    |   3 +
 include/dt-bindings/clock/sh73a0-clock.h     |   3 +
 17 files changed, 647 insertions(+), 51 deletions(-)

[PATCH 01/32] ARM: shmobile: r8a7740 dtsi: add remaining DIV6 clocks

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

This adds the remaining DIV6 clocks and all possible parents for the SUB
clock.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7740.dtsi | 79 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 78 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 8a09260..83c1c3c 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -431,6 +431,18 @@
 			clock-frequency = <27000000>;
 			clock-output-names = "dv";
 		};
+		fmsick_clk: fmsick_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "fmsick";
+		};
+		fmsock_clk: fmsock_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "fmsock";
+		};
 		fsiack_clk: fsiack_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
@@ -459,13 +471,78 @@
 		};
 
 		/* Variable factor clocks (DIV6) */
+		vclk1_clk: vclk1_clk at e6150008 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150008 4>;
+			clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>,
+				 <&cpg_clocks R8A7740_CLK_USB24S>,
+				 <&extal1_div2_clk>, <&extalr_clk>, <0>,
+				 <0>;
+			#clock-cells = <0>;
+			clock-output-names = "vclk1";
+		};
+		vclk2_clk: vclk2_clk at e615000c {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615000c 4>;
+			clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>,
+				 <&cpg_clocks R8A7740_CLK_USB24S>,
+				 <&extal1_div2_clk>, <&extalr_clk>, <0>,
+				 <0>;
+			#clock-cells = <0>;
+			clock-output-names = "vclk2";
+		};
+		fmsi_clk: fmsi_clk at e6150010 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150010 4>;
+			clocks = <&pllc1_div2_clk>, <&fmsick_clk>, <0>, <0>;
+			#clock-cells = <0>;
+			clock-output-names = "fmsi";
+		};
+		fmso_clk: fmso_clk at e6150014 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150014 4>;
+			clocks = <&pllc1_div2_clk>, <&fmsock_clk>, <0>, <0>;
+			#clock-cells = <0>;
+			clock-output-names = "fmso";
+		};
+		fsia_clk: fsia_clk at e6150018 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150018 4>;
+			clocks = <&pllc1_div2_clk>, <&fsiack_clk>, <0>, <0>;
+			#clock-cells = <0>;
+			clock-output-names = "fsia";
+		};
 		sub_clk: sub_clk at e6150080 {
 			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150080 4>;
-			clocks = <&pllc1_div2_clk>;
+			clocks = <&pllc1_div2_clk>,
+				 <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>;
 			#clock-cells = <0>;
 			clock-output-names = "sub";
 		};
+		spu_clk: spu_clk at e6150084 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150084 4>;
+			clocks = <&pllc1_div2_clk>,
+				 <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>;
+			#clock-cells = <0>;
+			clock-output-names = "spu";
+		};
+		vou_clk: vou_clk at e6150088 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150088 4>;
+			clocks = <&pllc1_div2_clk>, <&extal1_clk>, <&dv_clk>,
+				 <0>;
+			#clock-cells = <0>;
+			clock-output-names = "vou";
+		};
+		stpro_clk: stpro_clk at e615009c {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615009c 4>;
+			clocks = <&cpg_clocks R8A7740_CLK_PLLC0>;
+			#clock-cells = <0>;
+			clock-output-names = "stpro";
+		};
 
 		/* Fixed factor clocks */
 		pllc1_div2_clk: pllc1_div2_clk {
-- 
2.1.4

[PATCH 02/32] ARM: shmobile: sh73a0 dtsi: Set control-parent for all irqpin nodes

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The sh73a0 INTC can't mask interrupts properly most likely due to a
hardware bug. Set the control-parent property to delegate masking to the
parent interrupt controller.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 2dfd5b4..0767087 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -94,6 +94,7 @@
 			      0 6 IRQ_TYPE_LEVEL_HIGH
 			      0 7 IRQ_TYPE_LEVEL_HIGH
 			      0 8 IRQ_TYPE_LEVEL_HIGH>;
+		control-parent;
 	};
 
 	irqpin1: irqpin at e6900004 {
@@ -133,6 +134,7 @@
 			      0 22 IRQ_TYPE_LEVEL_HIGH
 			      0 23 IRQ_TYPE_LEVEL_HIGH
 			      0 24 IRQ_TYPE_LEVEL_HIGH>;
+		control-parent;
 	};
 
 	irqpin3: irqpin at e690000c {
@@ -152,6 +154,7 @@
 			      0 30 IRQ_TYPE_LEVEL_HIGH
 			      0 31 IRQ_TYPE_LEVEL_HIGH
 			      0 32 IRQ_TYPE_LEVEL_HIGH>;
+		control-parent;
 	};
 
 	i2c0: i2c at e6820000 {
-- 
2.1.4

[PATCH 03/32] ARM: shmobile: kzm9g-reference dts: Sort i2c0 children by unit address

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

While at it rename the ak4648 node to "codec" to describe the device's
function instead of its model, and move its device-specific property
after its generic properties.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index 6d32c87..0134d53 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -188,6 +188,13 @@
 
 &i2c0 {
 	status = "okay";
+
+	ak4648: codec at 12 {
+		compatible = "asahi-kasei,ak4648";
+		reg = <0x12>;
+		#sound-dai-cells = <0>;
+	};
+
 	as3711 at 40 {
 		compatible = "ams,as3711";
 		reg = <0x40>;
@@ -258,12 +265,6 @@
 			};
 		};
 	};
-
-	ak4648: ak4648 at 12 {
-		#sound-dai-cells = <0>;
-		compatible = "asahi-kasei,ak4648";
-		reg = <0x12>;
-	};
 };
 
 &i2c3 {
-- 
2.1.4

[PATCH 04/32] ARM: shmobile: kzm9g-reference dts: Add ak8975 magnetometer node

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add a DT node for the AK8975 magnetometer sensor, which is connected to
i2c0.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Specify the device interrupt to avoid polling for end of conversion.

While at it rename the DT node to compass at c to describe the device's
function instead of its model.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index 0134d53..873b415 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -189,6 +189,13 @@
 &i2c0 {
 	status = "okay";
 
+	compass at c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+		interrupt-parent = <&irqpin3>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+	};
+
 	ak4648: codec at 12 {
 		compatible = "asahi-kasei,ak4648";
 		reg = <0x12>;
-- 
2.1.4

[PATCH 05/32] ARM: shmobile: kzm9g-reference dts: Add adxl345 accelerometer node

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add a DT node for the ADXL345 three-axis digital accelerometer sensor,
which is connected to i2c0.

As trivial i2c devices are matched against the first compatible entry
only, compatibility is declared with "adi,adxl34x" only for now.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The device needs an interrupt to operate properly. Specify the two
interrupts used on the board.

While at it rename the DT node to accelerometer at 1d to describe the
device's function instead of its model.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index 873b415..fd16998 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -202,6 +202,14 @@
 		#sound-dai-cells = <0>;
 	};
 
+	accelerometer at 1d {
+		compatible = "adi,adxl34x";
+		reg = <0x1d>;
+		interrupt-parent = <&irqpin3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+			     <3 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	as3711 at 40 {
 		compatible = "ams,as3711";
 		reg = <0x40>;
-- 
2.1.4

[PATCH 06/32] ARM: shmobile: kzm9g-reference dts: Add r2025sd rtc node

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add a DT node for the R2025D real-time clock, which is connected to
i2c0.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index fd16998..e3723be 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -210,6 +210,11 @@
 			     <3 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	rtc at 32 {
+		compatible = "ricoh,r2025sd";
+		reg = <0x32>;
+	};
+
 	as3711 at 40 {
 		compatible = "ams,as3711";
 		reg = <0x40>;
-- 
2.1.4

[PATCH 07/32] ARM: shmobile: kzm9g-reference dts: Add st1232 touchscreen node

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Enable the kzm9g touchscreen controller in the board's DT file.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index e3723be..0156fc8 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -287,6 +287,17 @@
 	};
 };
 
+&i2c1 {
+	status = "okay";
+
+	touchscreen at 55 {
+		compatible = "sitronix,st1232";
+		reg = <0x55>;
+		interrupt-parent = <&irqpin1>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
 &i2c3 {
 	pinctrl-0 = <&i2c3_pins>;
 	pinctrl-names = "default";
-- 
2.1.4

[PATCH 08/32] ARM: shmobile: sh73a0 dtsi: Add missing INTCA0 clock for irqpin module

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

This clock drives the irqpin controller modules.
Before, it was assumed enabled by the bootloader or reset state.
By making it available to the driver, we make sure it gets enabled when
needed, and allow it to be managed by system or runtime PM.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0.dtsi            | 15 +++++++++++++++
 include/dt-bindings/clock/sh73a0-clock.h |  3 +++
 2 files changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 0767087..08f736d 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -94,6 +94,7 @@
 			      0 6 IRQ_TYPE_LEVEL_HIGH
 			      0 7 IRQ_TYPE_LEVEL_HIGH
 			      0 8 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		control-parent;
 	};
 
@@ -114,6 +115,7 @@
 			      0 14 IRQ_TYPE_LEVEL_HIGH
 			      0 15 IRQ_TYPE_LEVEL_HIGH
 			      0 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		control-parent;
 	};
 
@@ -134,6 +136,7 @@
 			      0 22 IRQ_TYPE_LEVEL_HIGH
 			      0 23 IRQ_TYPE_LEVEL_HIGH
 			      0 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		control-parent;
 	};
 
@@ -154,6 +157,7 @@
 			      0 30 IRQ_TYPE_LEVEL_HIGH
 			      0 31 IRQ_TYPE_LEVEL_HIGH
 			      0 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		control-parent;
 	};
 
@@ -698,5 +702,16 @@
 			clock-output-names =
 				"iic3", "iic4", "keysc";
 		};
+		mstp5_clks: mstp5_clks at e6150144 {
+			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150144 4>, <0xe615003c 4>;
+			clocks = <&cpg_clocks SH73A0_CLK_HP>;
+			#clock-cells = <1>;
+			clock-indices = <
+				SH73A0_CLK_INTCA0
+			>;
+			clock-output-names =
+				"intca0";
+		};
 	};
 };
diff --git a/include/dt-bindings/clock/sh73a0-clock.h b/include/dt-bindings/clock/sh73a0-clock.h
index 1dd3eb2..5336956 100644
--- a/include/dt-bindings/clock/sh73a0-clock.h
+++ b/include/dt-bindings/clock/sh73a0-clock.h
@@ -76,4 +76,7 @@
 #define SH73A0_CLK_IIC4		10
 #define SH73A0_CLK_KEYSC	3
 
+/* MSTP5 */
+#define SH73A0_CLK_INTCA0	8
+
 #endif
-- 
2.1.4

[PATCH 09/32] ARM: shmobile: sh73a0 dtsi: Add selectable sources to DIV6 clocks

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Specifies clock sources and register bits.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
[geert: Drop renesas,src-shift/renesas,src-width, pad to 4 or 8 parents]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0.dtsi | 64 ++++++++++++++++++++++++++++++-------------
 1 file changed, 45 insertions(+), 19 deletions(-)

diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 08f736d..ab319b7 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -433,133 +433,159 @@
 		vclk1_clk: vclk1_clk at e6150008 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150008 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&extcki_clk>, <&extal2_clk>, <&main_div2_clk>,
+				 <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>,
+				 <0>;
 			#clock-cells = <0>;
 			clock-output-names = "vclk1";
 		};
 		vclk2_clk: vclk2_clk at e615000c {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe615000c 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&extcki_clk>, <&extal2_clk>, <&main_div2_clk>,
+				 <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>,
+				 <0>;
 			#clock-cells = <0>;
 			clock-output-names = "vclk2";
 		};
 		vclk3_clk: vclk3_clk at e615001c {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe615001c 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&extcki_clk>, <&extal2_clk>, <&main_div2_clk>,
+				 <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>,
+				 <0>;
 			#clock-cells = <0>;
 			clock-output-names = "vclk3";
 		};
 		zb_clk: zb_clk at e6150010 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150010 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <0>,
+				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
 			#clock-cells = <0>;
 			clock-output-names = "zb";
 		};
 		flctl_clk: flctl_clk at e6150014 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150014 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <0>,
+				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
 			#clock-cells = <0>;
 			clock-output-names = "flctlck";
 		};
 		sdhi0_clk: sdhi0_clk at e6150074 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150074 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&pll1_div13_clk>, <0>;
 			#clock-cells = <0>;
 			clock-output-names = "sdhi0ck";
 		};
 		sdhi1_clk: sdhi1_clk at e6150078 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150078 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&pll1_div13_clk>, <0>;
 			#clock-cells = <0>;
 			clock-output-names = "sdhi1ck";
 		};
 		sdhi2_clk: sdhi2_clk at e615007c {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe615007c 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&pll1_div13_clk>, <0>;
 			#clock-cells = <0>;
 			clock-output-names = "sdhi2ck";
 		};
 		fsia_clk: fsia_clk at e6150018 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150018 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&fsiack_clk>, <&fsiack_clk>;
 			#clock-cells = <0>;
 			clock-output-names = "fsia";
 		};
 		fsib_clk: fsib_clk at e6150090 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150090 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&fsibck_clk>, <&fsibck_clk>;
 			#clock-cells = <0>;
 			clock-output-names = "fsib";
 		};
 		sub_clk: sub_clk at e6150080 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150080 4>;
-			clocks = <&extal2_clk>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&extal2_clk>, <&extal2_clk>;
 			#clock-cells = <0>;
 			clock-output-names = "sub";
 		};
 		spua_clk: spua_clk at e6150084 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150084 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&extal2_clk>, <&extal2_clk>;
 			#clock-cells = <0>;
 			clock-output-names = "spua";
 		};
 		spuv_clk: spuv_clk at e6150094 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150094 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&extal2_clk>, <&extal2_clk>;
 			#clock-cells = <0>;
 			clock-output-names = "spuv";
 		};
 		msu_clk: msu_clk at e6150088 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150088 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <0>,
+				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
 			#clock-cells = <0>;
 			clock-output-names = "msu";
 		};
 		hsi_clk: hsi_clk at e615008c {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe615008c 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&pll1_div7_clk>, <0>;
 			#clock-cells = <0>;
 			clock-output-names = "hsi";
 		};
 		mfg1_clk: mfg1_clk at e6150098 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150098 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <0>,
+				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
 			#clock-cells = <0>;
 			clock-output-names = "mfg1";
 		};
 		mfg2_clk: mfg2_clk at e615009c {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe615009c 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <0>,
+				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
 			#clock-cells = <0>;
 			clock-output-names = "mfg2";
 		};
 		dsit_clk: dsit_clk at e6150060 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150060 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <0>,
+				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
 			#clock-cells = <0>;
 			clock-output-names = "dsit";
 		};
 		dsi0p_clk: dsi0p_clk at e6150064 {
 			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150064 4>;
-			clocks = <&pll1_div2_clk>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&cpg_clocks SH73A0_CLK_MAIN>, <&extal2_clk>,
+				 <&extcki_clk>, <0>, <0>, <0>;
 			#clock-cells = <0>;
 			clock-output-names = "dsi0pck";
 		};
-- 
2.1.4

[PATCH 10/32] ARM: shmobile: kzm9g dts: Declare the full 512 MiB of RAM

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Traditionally, the first 16 MiB of RAM was reserved for the RT
processor.  However, this is incompatible with CONFIG_AUTO_ZRELADDR=y,
which requires that the start address of physical memory is a multiple
of 128 MiB.

As CONFIG_AUTO_ZRELADDR=y is enabled for multi-platform kernels, declare
RAM to start at 0x40000000.

While at it, reclaim the last 8 MiB of RAM, too, so the full 512 MiB is
available. Note that kzm9g_defconfig still has
CONFIG_MEMORY_START=0x41000000 and CONFIG_MEMORY_SIZE=0x1f000000, so
before the advent of DT we scribbled over the last 8 MiB, too.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0-kzm9g.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 27c5f42..e7dae01 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -21,6 +21,6 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x41000000 0x1e800000>;
+		reg = <0x40000000 0x20000000>;
 	};
 };
-- 
2.1.4

[PATCH 11/32] ARM: shmobile: kzm9g-reference dts: Declare the full 512 MiB of RAM

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Traditionally, the first 16 MiB of RAM was reserved for the RT
processor.  However, this is incompatible with CONFIG_AUTO_ZRELADDR=y,
which requires that the start address of physical memory is a multiple
of 128 MiB.

As CONFIG_AUTO_ZRELADDR=y is enabled for multi-platform kernels, declare
RAM to start at 0x40000000.

While at it, reclaim the last 8 MiB of RAM, too, so the full 512 MiB is
available. Note that kzm9g_defconfig still has
CONFIG_MEMORY_START=0x41000000 and CONFIG_MEMORY_SIZE=0x1f000000, so
before the advent of DT we scribbled over the last 8 MiB, too.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index 0156fc8..bf365f7 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -45,7 +45,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x41000000 0x1e800000>;
+		reg = <0x40000000 0x20000000>;
 	};
 
 	reg_1p8v: regulator at 0 {
-- 
2.1.4

[PATCH 12/32] ARM: shmobile: r8a7794: Add DMAC devices to DT

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Instantiate the two system DMA controllers in the r8a7794 device tree.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 8f78da5..7474535 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -107,6 +107,66 @@
 			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	dmac0: dma-controller at e6700000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xe6700000 0 0x20000>;
+		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+			      0 200 IRQ_TYPE_LEVEL_HIGH
+			      0 201 IRQ_TYPE_LEVEL_HIGH
+			      0 202 IRQ_TYPE_LEVEL_HIGH
+			      0 203 IRQ_TYPE_LEVEL_HIGH
+			      0 204 IRQ_TYPE_LEVEL_HIGH
+			      0 205 IRQ_TYPE_LEVEL_HIGH
+			      0 206 IRQ_TYPE_LEVEL_HIGH
+			      0 207 IRQ_TYPE_LEVEL_HIGH
+			      0 208 IRQ_TYPE_LEVEL_HIGH
+			      0 209 IRQ_TYPE_LEVEL_HIGH
+			      0 210 IRQ_TYPE_LEVEL_HIGH
+			      0 211 IRQ_TYPE_LEVEL_HIGH
+			      0 212 IRQ_TYPE_LEVEL_HIGH
+			      0 213 IRQ_TYPE_LEVEL_HIGH
+			      0 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
+	dmac1: dma-controller at e6720000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xe6720000 0 0x20000>;
+		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+			      0 216 IRQ_TYPE_LEVEL_HIGH
+			      0 217 IRQ_TYPE_LEVEL_HIGH
+			      0 218 IRQ_TYPE_LEVEL_HIGH
+			      0 219 IRQ_TYPE_LEVEL_HIGH
+			      0 308 IRQ_TYPE_LEVEL_HIGH
+			      0 309 IRQ_TYPE_LEVEL_HIGH
+			      0 310 IRQ_TYPE_LEVEL_HIGH
+			      0 311 IRQ_TYPE_LEVEL_HIGH
+			      0 312 IRQ_TYPE_LEVEL_HIGH
+			      0 313 IRQ_TYPE_LEVEL_HIGH
+			      0 314 IRQ_TYPE_LEVEL_HIGH
+			      0 315 IRQ_TYPE_LEVEL_HIGH
+			      0 316 IRQ_TYPE_LEVEL_HIGH
+			      0 317 IRQ_TYPE_LEVEL_HIGH
+			      0 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
 	scifa0: serial at e6c40000 {
 		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
 		reg = <0 0xe6c40000 0 64>;
-- 
2.1.4

[PATCH 12/32] ARM: shmobile: r8a7794: Add DMAC devices to DT

[Geert Uytterhoeven]

On Thu, Feb 26, 2015 at 7:21 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
>
> Instantiate the two system DMA controllers in the r8a7794 device tree.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH 13/32] ARM: shmobile: r8a7790: Add IPMMU DT nodes

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Add the six IPMMU instances found in the r8a7790 to DT with a disabled
status.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 51 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 4b38fc9..24de994 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1465,4 +1465,55 @@
 			ssi9: ssi at 9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; };
 		};
 	};
+
+	ipmmu_sy0: mmu at e6280000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6280000 0 0x1000>;
+		interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 224 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_sy1: mmu at e6290000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6290000 0 0x1000>;
+		interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_ds: mmu at e6740000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6740000 0 0x1000>;
+		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 199 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mp: mmu at ec680000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xec680000 0 0x1000>;
+		interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mx: mmu at fe951000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xfe951000 0 0x1000>;
+		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_rt: mmu at ffc80000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xffc80000 0 0x1000>;
+		interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
 };
-- 
2.1.4

[PATCH 14/32] ARM: shmobile: r8a7791: Add IPMMU DT nodes

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Add the seven IPMMU instances found in the r8a7791 to DT with a disabled
status.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index e35812a..43fb58a 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1384,6 +1384,66 @@
 		status = "disabled";
 	};
 
+	ipmmu_sy0: mmu at e6280000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6280000 0 0x1000>;
+		interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 224 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_sy1: mmu at e6290000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6290000 0 0x1000>;
+		interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_ds: mmu at e6740000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6740000 0 0x1000>;
+		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 199 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mp: mmu at ec680000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xec680000 0 0x1000>;
+		interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mx: mmu at fe951000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xfe951000 0 0x1000>;
+		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_rt: mmu at ffc80000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xffc80000 0 0x1000>;
+		interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_gp: mmu at e62a0000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe62a0000 0 0x1000>;
+		interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 261 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
 	rcar_sound: rcar_sound at ec500000 {
 		/*
 		 * #sound-dai-cells is required
-- 
2.1.4

[PATCH 15/32] ARM: shmobile: r8a7794: Add IPMMU DT nodes

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Add the six IPMMU instances found in the r8a7794 to DT with a disabled
status.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi | 50 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 7474535..6f70bc4 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -645,4 +645,54 @@
 			clock-output-names = "scifa3", "scifa4", "scifa5";
 		};
 	};
+
+	ipmmu_sy0: mmu at e6280000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6280000 0 0x1000>;
+		interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 224 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_sy1: mmu at e6290000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6290000 0 0x1000>;
+		interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_ds: mmu at e6740000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6740000 0 0x1000>;
+		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 199 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+	};
+
+	ipmmu_mp: mmu at ec680000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xec680000 0 0x1000>;
+		interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mx: mmu at fe951000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xfe951000 0 0x1000>;
+		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+	};
+
+	ipmmu_gp: mmu at e62a0000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe62a0000 0 0x1000>;
+		interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 261 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
 };
-- 
2.1.4

[PATCH 16/32] ARM: shmobile: r8a7794: Add ethernet controller to device tree

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Add a DT node for the on-SoC ethernet controller device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 6f70bc4..63b918b 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -329,6 +329,17 @@
 		status = "disabled";
 	};
 
+	ether: ethernet at ee700000 {
+		compatible = "renesas,ether-r8a7794";
+		reg = <0 0xee700000 0 0x400>;
+		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7794_CLK_ETHER>;
+		phy-mode = "rmii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
2.1.4

[PATCH 17/32] ARM: shmobile: r8a7794: alt: Enable ethernet controller

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Enable the ethernet controller for the Alt board. Pin muxing entries are
currently left out as r8a7794 pin control support isn't available yet.
We thus rely on the boot loader to configure ethernet pins for now.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794-alt.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 0d848e6..25bf434 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -43,6 +43,19 @@
 	status = "okay";
 };
 
+&ether {
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy at 1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
 &scif2 {
 	status = "okay";
 };
-- 
2.1.4

[PATCH 18/32] ARM: shmobile: r8a7794: Correct SDHI clock base address, labels and output-names

[Simon Horman]

* Correct base address of SD3 div6 clk.
* Update div6 clock node labels
  There appears to have been some inconsistency and confusion here as on
  the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on
  the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3.

This has no run-time affect as the clock nodes are not currently used.

Fixes: 8e181633e6ca96049 ("ARM: shmobile: r8a7794: Add SDHI clocks to device tree")
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7794.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 63b918b..fff9497 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -365,19 +365,19 @@
 					     "lb", "qspi", "sdh", "sd0", "z";
 		};
 		/* Variable factor clocks */
-		sd1_clk: sd2_clk at e6150078 {
+		sd2_clk: sd2_clk at e6150078 {
 			compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150078 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd1";
+			clock-output-names = "sd2";
 		};
-		sd2_clk: sd3_clk at e615007c {
+		sd3_clk: sd3_clk at e615026c {
 			compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615007c 0 4>;
+			reg = <0 0xe615026c 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd2";
+			clock-output-names = "sd3";
 		};
 		mmc0_clk: mmc0_clk at e6150240 {
 			compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
@@ -589,7 +589,7 @@
 		mstp3_clks: mstp3_clks at e615013c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
+			clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
 			         <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
-- 
2.1.4

[PATCH 19/32] ARM: shmobile: r8a7791: Correct SDHI clock labels and output-names

[Simon Horman]

There appears to have been some inconsistency and confusion here as on
the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on
the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3.

Fixes: 59e79895b95892863 ("ARM: shmobile: r8a7791: Add clocks")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7791.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 43fb58a..afba8af 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -874,19 +874,19 @@
 		};
 
 		/* Variable factor clocks */
-		sd1_clk: sd2_clk at e6150078 {
+		sd2_clk: sd2_clk at e6150078 {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150078 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd1";
+			clock-output-names = "sd2";
 		};
-		sd2_clk: sd3_clk at e615026c {
+		sd3_clk: sd3_clk at e615026c {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe615026c 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd2";
+			clock-output-names = "sd3";
 		};
 		mmc0_clk: mmc0_clk at e6150240 {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
@@ -1107,7 +1107,7 @@
 		mstp3_clks: mstp3_clks at e615013c {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
+			clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
 				 <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
 				 <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
-- 
2.1.4

[PATCH 20/32] ARM: shmobile: koelsch: Add DU HDMI output support

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Add DT nodes for the ADV7511 HDMI encoder and its HDMI output connector
and configure the DISP pin group that drives the HDMI transmitter DE
pin.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 50 ++++++++++++++++++++++++++++++++++-
 1 file changed, 49 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index a3c2780..624bb2c 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -258,6 +258,17 @@
 			system-clock-frequency = <11289600>;
 		};
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
 };
 
 &du {
@@ -266,6 +277,11 @@
 	status = "okay";
 
 	ports {
+		port at 0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
 		port at 1 {
 			lvds_connector: endpoint {
 			};
@@ -284,7 +300,7 @@
 	};
 
 	du_pins: du {
-		renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
+		renesas,groups = "du_rgb666", "du_sync", "du_disp", "du_clk_out_0";
 		renesas,function = "du";
 	};
 
@@ -506,6 +522,38 @@
 		};
 	};
 
+	hdmi at 39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port at 1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+
 	eeprom at 50 {
 		compatible = "renesas,24c02";
 		reg = <0x50>;
-- 
2.1.4

[PATCH 21/32] ARM: shmobile: r8a7790: smp: remap whole apmu region

[Simon Horman]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

Documentation says the last register is at 0x184 (CAxCPUCMCR), so use
proper length. Current APMU code accesses CAxCPUnCR which is currently
outside of the remapped area.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/smp-r8a7790.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c
index 9c3da13..a5bef87 100644
--- a/arch/arm/mach-shmobile/smp-r8a7790.c
+++ b/arch/arm/mach-shmobile/smp-r8a7790.c
@@ -37,11 +37,11 @@ static struct rcar_sysc_ch r8a7790_ca7_scu = {
 
 static struct rcar_apmu_config r8a7790_apmu_config[] = {
 	{
-		.iomem = DEFINE_RES_MEM(0xe6152000, 0x88),
+		.iomem = DEFINE_RES_MEM(0xe6152000, 0x188),
 		.cpus = { 0, 1, 2, 3 },
 	},
 	{
-		.iomem = DEFINE_RES_MEM(0xe6151000, 0x88),
+		.iomem = DEFINE_RES_MEM(0xe6151000, 0x188),
 		.cpus = { 0x100, 0x0101, 0x102, 0x103 },
 	}
 };
-- 
2.1.4

[PATCH 22/32] ARM: shmobile: r8a7791: smp: remap whole apmu region

[Simon Horman]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

Documentation says the last register is at 0x184 (CAxCPUCMCR), so use
proper length. Current APMU code accesses CAxCPUnCR which is currently
outside of the remapped area.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/smp-r8a7791.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
index 7e49e0a..de1d92d 100644
--- a/arch/arm/mach-shmobile/smp-r8a7791.c
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -27,7 +27,7 @@
 
 static struct rcar_apmu_config r8a7791_apmu_config[] = {
 	{
-		.iomem = DEFINE_RES_MEM(0xe6152000, 0x88),
+		.iomem = DEFINE_RES_MEM(0xe6152000, 0x188),
 		.cpus = { 0, 1 },
 	}
 };
-- 
2.1.4

[PATCH 23/32] ARM: shmobile: emev2 dtsi: Add PFC information

[Simon Horman]

From: Niklas S?derlund <niso@kth.se>

With this information all GPIOs can make use of the PFC functionality.

Signed-off-by: Niklas S?derlund <niso@kth.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/emev2.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index cc7bfe0..bb45694 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -169,12 +169,18 @@
 		clock-names = "sclk";
 	};
 
+	pfc: pfc at e0140200 {
+		compatible = "renesas,pfc-emev2";
+		reg = <0xe0140200 0x100>;
+	};
+
 	gpio0: gpio at e0050000 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
 		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 68 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
 		#gpio-cells = <2>;
 		ngpios = <32>;
 		interrupt-controller;
@@ -186,6 +192,7 @@
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 70 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
 		#gpio-cells = <2>;
 		ngpios = <32>;
 		interrupt-controller;
@@ -197,6 +204,7 @@
 		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 72 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
 		#gpio-cells = <2>;
 		ngpios = <32>;
 		interrupt-controller;
@@ -208,6 +216,7 @@
 		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 74 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
 		#gpio-cells = <2>;
 		ngpios = <32>;
 		interrupt-controller;
@@ -219,6 +228,7 @@
 		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 76 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 128 31>;
 		#gpio-cells = <2>;
 		ngpios = <31>;
 		interrupt-controller;
-- 
2.1.4

[PATCH 24/32] ARM: shmobile: emev2-kzm9d dts: Add PFC information for uart1

[Simon Horman]

From: Niklas S?derlund <niso@kth.se>

Configure the pinmux on kzm9d to use the serial connector for uart1.

Signed-off-by: Niklas S?derlund <niso@kth.se>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/emev2-kzm9d.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 667d323..1944627 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -94,3 +94,16 @@
 		vdd33a-supply = <&reg_3p3v>;
 	};
 };
+
+&pfc {
+	uart1_pins: uart at e1030000 {
+		renesas,groups = "uart1_ctrl", "uart1_data";
+		renesas,function = "uart1";
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
-- 
2.1.4

[PATCH 25/32] ARM: shmobile: r8a7790: add CAN clocks

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

The R-Car CAN controllers can derive the CAN bus clock not only from their
peripheral clock input (clkp1) but also from the other internal clock (clkp2)
and external clock fed on CAN_CLK pin.  Describe those clocks in the device
tree,  along with  the USB_EXTAL clock  from which clkp2 is derived.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi            | 22 ++++++++++++++++++++--
 include/dt-bindings/clock/r8a7790-clock.h |  1 +
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 24de994..e872854 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -838,16 +838,34 @@
 			clock-output-names = "audio_clk_c";
 		};
 
+		/* External USB clock - can be overridden by the board */
+		usb_extal_clk: usb_extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+			clock-output-names = "usb_extal";
+		};
+
+		/* External CAN clock */
+		can_clk: can_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "can_clk";
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks at e6150000 {
 			compatible = "renesas,r8a7790-cpg-clocks",
 				     "renesas,rcar-gen2-cpg-clocks";
 			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
+			clocks = <&extal_clk &usb_extal_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
 					     "lb", "qspi", "sdh", "sd0", "sd1",
-					     "z";
+					     "z", "rcan";
 		};
 
 		/* Variable factor clocks */
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index 9194027..ffa8c11 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -21,6 +21,7 @@
 #define R8A7790_CLK_SD0			7
 #define R8A7790_CLK_SD1			8
 #define R8A7790_CLK_Z			9
+#define R8A7790_CLK_RCAN		10
 
 /* MSTP0 */
 #define R8A7790_CLK_MSIOF0		0
-- 
2.1.4

[PATCH 26/32] ARM: shmobile: r8a7790: add CAN DT support

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Define the generic R8A7790 parts of the CAN0/1 device nodes.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index e872854..cd7fc05 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -792,6 +792,26 @@
 		};
 	};
 
+	can0: can at e6e80000 {
+		compatible = "renesas,can-r8a7790";
+		reg = <0 0xe6e80000 0 0x1000>;
+		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
+			 <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
+	can1: can at e6e88000 {
+		compatible = "renesas,can-r8a7790";
+		reg = <0 0xe6e88000 0 0x1000>;
+		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
+			 <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
2.1.4

[PATCH 27/32] ARM: shmobile: r8a7791: add CAN clocks

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

The R-Car CAN controllers can derive the CAN bus clock not only from their
peripheral clock input (clkp1) but also from the other internal clock (clkp2)
and external clock fed on CAN_CLK pin.  Describe those clocks in the device
tree,  along with  the USB_EXTAL clock  from which clkp2 is derived.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi            | 23 +++++++++++++++++++++--
 include/dt-bindings/clock/r8a7791-clock.h |  1 +
 2 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index afba8af..1ebffef 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -862,15 +862,34 @@
 			status = "disabled";
 		};
 
+		/* External USB clock - can be overridden by the board */
+		usb_extal_clk: usb_extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+			clock-output-names = "usb_extal";
+		};
+
+		/* External CAN clock */
+		can_clk: can_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "can_clk";
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks at e6150000 {
 			compatible = "renesas,r8a7791-cpg-clocks",
 				     "renesas,rcar-gen2-cpg-clocks";
 			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
+			clocks = <&extal_clk &usb_extal_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "sdh", "sd0", "z";
+					     "lb", "qspi", "sdh", "sd0", "z",
+					     "rcan";
 		};
 
 		/* Variable factor clocks */
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index f096f3f..a45a363 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -20,6 +20,7 @@
 #define R8A7791_CLK_SDH			6
 #define R8A7791_CLK_SD0			7
 #define R8A7791_CLK_Z			8
+#define R8A7791_CLK_RCAN		9
 
 /* MSTP0 */
 #define R8A7791_CLK_MSIOF0		0
-- 
2.1.4

[PATCH 28/32] ARM: shmobile: r8a7791: add CAN DT support

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Define the generic R8A7791 parts of the CAN0/1 device nodes.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 1ebffef..ff49b95 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -816,6 +816,26 @@
 		};
 	};
 
+	can0: can at e6e80000 {
+		compatible = "renesas,can-r8a7791";
+		reg = <0 0xe6e80000 0 0x1000>;
+		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
+			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
+	can1: can at e6e88000 {
+		compatible = "renesas,can-r8a7791";
+		reg = <0 0xe6e88000 0 0x1000>;
+		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
+			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
2.1.4

[PATCH 29/32] ARM: shmobile: henninger: add CAN0 DT support

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Define the Henninger board dependent part of the CAN0 device node.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-henninger.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
index d2ebf11..e33e404 100644
--- a/arch/arm/boot/dts/r8a7791-henninger.dts
+++ b/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -141,6 +141,11 @@
 		renesas,groups = "vin0_data8", "vin0_clk";
 		renesas,function = "vin0";
 	};
+
+	can0_pins: can0 {
+		renesas,groups = "can0_data";
+		renesas,function = "can0";
+	};
 };
 
 &scif0 {
@@ -307,3 +312,9 @@
 		};
 	};
 };
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
-- 
2.1.4

[PATCH 30/32] ARM: shmobile: r8a7791: add ADSP clocks

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Add the ADSP clocks to the CPG and MSTP5 nodes of the R8A7791 device tree.

Based on the original patch by Konstantin Kozhevnikov
<konstantin.kozhevnikov@cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi            | 11 +++++++----
 include/dt-bindings/clock/r8a7791-clock.h |  2 ++
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index ff49b95..1e593a2 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -909,7 +909,7 @@
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
 					     "lb", "qspi", "sdh", "sd0", "z",
-					     "rcan";
+					     "rcan", "adsp";
 		};
 
 		/* Variable factor clocks */
@@ -1164,13 +1164,16 @@
 		mstp5_clks: mstp5_clks at e6150144 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
-			clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>;
+			clocks = <&hp_clk>, <&hp_clk>, <&cpg_clocks R8A7791_CLK_ADSP>,
+				 <&extal_clk>, <&p_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1
-				R8A7791_CLK_THERMAL R8A7791_CLK_PWM
+				R8A7791_CLK_ADSP_MOD R8A7791_CLK_THERMAL
+				R8A7791_CLK_PWM
 			>;
-			clock-output-names = "audmac0", "audmac1", "thermal", "pwm";
+			clock-output-names = "audmac0", "audmac1", "adsp_mod",
+					     "thermal", "pwm";
 		};
 		mstp7_clks: mstp7_clks at e615014c {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index a45a363..8fc5dc8 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -21,6 +21,7 @@
 #define R8A7791_CLK_SD0			7
 #define R8A7791_CLK_Z			8
 #define R8A7791_CLK_RCAN		9
+#define R8A7791_CLK_ADSP		10
 
 /* MSTP0 */
 #define R8A7791_CLK_MSIOF0		0
@@ -72,6 +73,7 @@
 /* MSTP5 */
 #define R8A7791_CLK_AUDIO_DMAC1		1
 #define R8A7791_CLK_AUDIO_DMAC0		2
+#define R8A7791_CLK_ADSP_MOD		6
 #define R8A7791_CLK_THERMAL		22
 #define R8A7791_CLK_PWM			23
 
-- 
2.1.4

[PATCH 31/32] ARM: shmobile: r8a7790: add ADSP clocks

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Add the ADSP clocks to the CPG and MSTP5 nodes of the R8A7790 device tree.

Based on the original patch by Konstantin Kozhevnikov
<konstantin.kozhevnikov@cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi            | 11 +++++++----
 include/dt-bindings/clock/r8a7790-clock.h |  2 ++
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index cd7fc05..c6c0a0c 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -885,7 +885,7 @@
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
 					     "lb", "qspi", "sdh", "sd0", "sd1",
-					     "z", "rcan";
+					     "z", "rcan", "adsp";
 		};
 
 		/* Variable factor clocks */
@@ -1159,13 +1159,16 @@
 		mstp5_clks: mstp5_clks at e6150144 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
-			clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>;
+			clocks = <&hp_clk>, <&hp_clk>, <&cpg_clocks R8A7790_CLK_ADSP>,
+				 <&extal_clk>, <&p_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1
-				R8A7790_CLK_THERMAL R8A7790_CLK_PWM
+				R8A7790_CLK_ADSP_MOD R8A7790_CLK_THERMAL
+				R8A7790_CLK_PWM
 			>;
-			clock-output-names = "audmac0", "audmac1", "thermal", "pwm";
+			clock-output-names = "audmac0", "audmac1", "adsp_mod",
+					     "thermal", "pwm";
 		};
 		mstp7_clks: mstp7_clks at e615014c {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index ffa8c11..3f2c6b1 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -22,6 +22,7 @@
 #define R8A7790_CLK_SD1			8
 #define R8A7790_CLK_Z			9
 #define R8A7790_CLK_RCAN		10
+#define R8A7790_CLK_ADSP		11
 
 /* MSTP0 */
 #define R8A7790_CLK_MSIOF0		0
@@ -81,6 +82,7 @@
 /* MSTP5 */
 #define R8A7790_CLK_AUDIO_DMAC1		1
 #define R8A7790_CLK_AUDIO_DMAC0		2
+#define R8A7790_CLK_ADSP_MOD		6
 #define R8A7790_CLK_THERMAL		22
 #define R8A7790_CLK_PWM			23
 
-- 
2.1.4

[PATCH 32/32] ARM: shmobile: r8a7794: add SDHI DT support

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Define the generic R8A7794 parts of the SDHI[012] device nodes.

Based on the orginal patch by Shinobu Uehara <shinobu.uehara.xc@renesas.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index fff9497..7a3ffa5 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -340,6 +340,30 @@
 		status = "disabled";
 	};
 
+	sdhi0: sd at ee100000 {
+		compatible = "renesas,sdhi-r8a7794";
+		reg = <0 0xee100000 0 0x200>;
+		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
+		status = "disabled";
+	};
+
+	sdhi1: sd at ee140000 {
+		compatible = "renesas,sdhi-r8a7794";
+		reg = <0 0xee140000 0 0x100>;
+		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
+		status = "disabled";
+	};
+
+	sdhi2: sd at ee160000 {
+		compatible = "renesas,sdhi-r8a7794";
+		reg = <0 0xee160000 0 0x100>;
+		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
2.1.4

[GIT PULL] Renesas ARM Based SoC DT Updates for v4.1

[Arnd Bergmann]

On Thursday 26 February 2015 15:21:25 Simon Horman wrote:
> Renesas ARM Based SoC DT Updates for v4.1
> 
> * Increase hardware coverage of DT for various SoCs
> * Add PFC information for emev2 SoC
> * Remap entire APMU region for r8a7791 and r8a7790 SoCs
> * Declare the full 512 MiB of RAM for kzm9g board
> * Add selectable sources to DIV6 clocks to sh73a0 SoC
> * Add missing INTCA0 clock for irqpin module on sh73a0 SoC
> * Set control-parent for all irqpin node on sh73a0 SoC
> 

Pulled into next/dt, thanks!

	Arnd