[GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.2

[GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.2

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these second round of Renesas ARM based SoC DT updates for v4.2.

This pull request is based on the previous round of
such requests, tagged as renesas-dt-for-v4.2,
which I have already sent a pull-request for.

The change from using "nor-jedec" instead of "jedec,spi-nor" should
be safe as the usage of "nor-jedec" was added earlier in the v4.2 release
cycle and thus has not been present in a release.


The following changes since commit 7706993e2deb75022dbcfc3043890aa1a0020189:

  ARM: shmobile: r8a7791: Enable DMA for HSUSB (2015-05-12 08:55:16 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt2-for-v4.2

for you to fetch changes up to acea43fcb02746e907725c6dbd2eb95b32d79ea5:

  ARM: shmobile: r8a7790 dtsi: Describe DMA for the serial ports (2015-05-26 10:02:43 +0900)

----------------------------------------------------------------
Second Round of Renesas ARM Based SoC DT Updates for v4.2

* Describe DMA for the serial ports of R-Car Gen2 SoCs
* Add MMCIF max-frequency to R-Car Gen2 SoCs
* Use "nor-jedec" instead of "jedec,spi-nor"

----------------------------------------------------------------
Geert Uytterhoeven (8):
      ARM: shmobile: lager dts: Replace "nor-jedec" by "jedec,spi-nor"
      ARM: shmobile: koelsch dts: Replace "nor-jedec" by "jedec,spi-nor"
      ARM: shmobile: bockw-reference dts: Replace "nor-jedec" by "jedec,spi-nor"
      ARM: shmobile: henninger dts: Replace "nor-jedec" by "jedec,spi-nor"
      ARM: shmobile: bockw dts: Replace "nor-jedec" by "jedec,spi-nor"
      ARM: shmobile: r8a7794 dtsi: Describe DMA for the serial ports
      ARM: shmobile: r8a7791 dtsi: Describe DMA for the serial ports
      ARM: shmobile: r8a7790 dtsi: Describe DMA for the serial ports

Kuninori Morimoto (2):
      ARM: shmobile: r8a7790: add MMCIF max-frequency
      ARM: shmobile: r8a7791: add MMCIF max-frequency

 arch/arm/boot/dts/r8a7778-bockw-reference.dts |  2 +-
 arch/arm/boot/dts/r8a7778-bockw.dts           |  2 +-
 arch/arm/boot/dts/r8a7790-lager.dts           |  2 +-
 arch/arm/boot/dts/r8a7790.dtsi                | 22 ++++++++++++++++
 arch/arm/boot/dts/r8a7791-henninger.dts       |  2 +-
 arch/arm/boot/dts/r8a7791-koelsch.dts         |  2 +-
 arch/arm/boot/dts/r8a7791.dtsi                | 37 +++++++++++++++++++++++++++
 arch/arm/boot/dts/r8a7794.dtsi                | 36 ++++++++++++++++++++++++++
 8 files changed, 100 insertions(+), 5 deletions(-)

[PATCH 01/10] ARM: shmobile: lager dts: Replace "nor-jedec" by "jedec, spi-nor"

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Cfr. commit 8947e396a8296c52 ('Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"')

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index b6cffcedd116..2eb8a995ae9f 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -429,7 +429,7 @@
 	flash: flash at 0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl512s", "nor-jedec";
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
 		spi-tx-bus-width = <4>;
-- 
2.1.4

[PATCH 02/10] ARM: shmobile: koelsch dts: Replace "nor-jedec" by "jedec, spi-nor"

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Cfr. commit 8947e396a8296c52 ('Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"')

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 9cb8a6c8e3f1..f8cd86b9d27f 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -474,7 +474,7 @@
 	flash: flash at 0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl512s", "nor-jedec";
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
 		spi-tx-bus-width = <4>;
-- 
2.1.4

[PATCH 03/10] ARM: shmobile: bockw-reference dts: Replace "nor-jedec" by "jedec, spi-nor"

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Cfr. commit 8947e396a8296c52 ('Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"')

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7778-bockw-reference.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
index f9422d887b44..dffa6ff30360 100644
--- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
@@ -119,7 +119,7 @@
 	flash: flash at 0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl008k", "nor-jedec";
+		compatible = "spansion,s25fl008k", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <104000000>;
 		m25p,fast-read;
-- 
2.1.4

[PATCH 04/10] ARM: shmobile: henninger dts: Replace "nor-jedec" by "jedec, spi-nor"

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Cfr. commit 8947e396a8296c52 ('Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"')

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-henninger.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
index bb80122b4113..655d1804e5e9 100644
--- a/arch/arm/boot/dts/r8a7791-henninger.dts
+++ b/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -226,7 +226,7 @@
 	flash at 0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl512s", "nor-jedec";
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
 		spi-tx-bus-width = <4>;
-- 
2.1.4

[PATCH 05/10] ARM: shmobile: bockw dts: Replace "nor-jedec" by "jedec, spi-nor"

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Cfr. commit 8947e396a8296c52 ('Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"')

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7778-bockw.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index dfbb12e4fef4..90543b12d7e2 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -186,7 +186,7 @@
 	flash: flash at 0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl008k", "nor-jedec";
+		compatible = "spansion,s25fl008k", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <104000000>;
 		m25p,fast-read;
-- 
2.1.4

[PATCH 06/10] ARM: shmobile: r8a7790: add MMCIF max-frequency

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 62a9086b133d..70248df02342 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -490,6 +490,7 @@
 		dma-names = "tx", "rx";
 		reg-io-width = <4>;
 		status = "disabled";
+		max-frequency = <97500000>;
 	};
 
 	mmcif1: mmc at ee220000 {
@@ -501,6 +502,7 @@
 		dma-names = "tx", "rx";
 		reg-io-width = <4>;
 		status = "disabled";
+		max-frequency = <97500000>;
 	};
 
 	pfc: pfc at e6060000 {
-- 
2.1.4

[PATCH 07/10] ARM: shmobile: r8a7791: add MMCIF max-frequency

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 7613abea13d7..bbef666596e5 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -494,6 +494,7 @@
 		dma-names = "tx", "rx";
 		reg-io-width = <4>;
 		status = "disabled";
+		max-frequency = <97500000>;
 	};
 
 	sdhi0: sd at ee100000 {
-- 
2.1.4

[PATCH 08/10] ARM: shmobile: r8a7794 dtsi: Describe DMA for the serial ports

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add DMA properties to all SCIF, SCIFA, SCIFB, and HSCIF device nodes.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 01cf54f70501..b73819423311 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -174,6 +174,8 @@
 		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -183,6 +185,8 @@
 		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -192,6 +196,8 @@
 		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -201,6 +207,8 @@
 		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -210,6 +218,8 @@
 		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -219,6 +229,8 @@
 		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x23>, <&dmac0 0x24>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -228,6 +240,8 @@
 		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -237,6 +251,8 @@
 		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -246,6 +262,8 @@
 		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -255,6 +273,8 @@
 		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -264,6 +284,8 @@
 		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -273,6 +295,8 @@
 		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -282,6 +306,8 @@
 		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -291,6 +317,8 @@
 		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -300,6 +328,8 @@
 		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -309,6 +339,8 @@
 		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -318,6 +350,8 @@
 		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -327,6 +361,8 @@
 		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
-- 
2.1.4

[PATCH 09/10] ARM: shmobile: r8a7791 dtsi: Describe DMA for the serial ports

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add DMA properties to all SCIF, SCIFA, SCIFB, and HSCIF device nodes.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index bbef666596e5..dc1cd3f16606 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -533,6 +533,8 @@
 		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -542,6 +544,8 @@
 		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -551,6 +555,8 @@
 		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -560,6 +566,8 @@
 		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -569,6 +577,8 @@
 		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -578,6 +588,8 @@
 		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x23>, <&dmac0 0x24>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -587,6 +599,8 @@
 		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -596,6 +610,8 @@
 		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -605,6 +621,8 @@
 		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -614,6 +632,8 @@
 		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -623,6 +643,8 @@
 		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -632,6 +654,8 @@
 		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -641,6 +665,8 @@
 		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -650,6 +676,8 @@
 		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -659,6 +687,8 @@
 		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -668,6 +698,8 @@
 		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -677,6 +709,8 @@
 		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -686,6 +720,8 @@
 		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
-- 
2.1.4

[PATCH 10/10] ARM: shmobile: r8a7790 dtsi: Describe DMA for the serial ports

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add DMA properties to all SCIF, SCIFA, SCIFB, and HSCIF device nodes.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 70248df02342..51ab8865ea37 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -556,6 +556,8 @@
 		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -565,6 +567,8 @@
 		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -574,6 +578,8 @@
 		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -583,6 +589,8 @@
 		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -592,6 +600,8 @@
 		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -601,6 +611,8 @@
 		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -610,6 +622,8 @@
 		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -619,6 +633,8 @@
 		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -628,6 +644,8 @@
 		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -637,6 +655,8 @@
 		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
-- 
2.1.4

[GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.2

[Arnd Bergmann]

On Friday 29 May 2015 09:54:16 Simon Horman wrote:
> This pull request is based on the previous round of
> such requests, tagged as renesas-dt-for-v4.2,
> which I have already sent a pull-request for.
> 
> The change from using "nor-jedec" instead of "jedec,spi-nor" should
> be safe as the usage of "nor-jedec" was added earlier in the v4.2 release
> cycle and thus has not been present in a release.
> 
> 

Pulled into next/dt, thanks!

	Arnd