From mboxrd@z Thu Jan 1 00:00:00 1970 From: cyrille.pitchen@atmel.com (Cyrille Pitchen) Date: Fri, 19 Jun 2015 10:49:33 +0200 Subject: [PATCH v3 0/2] mfd: flexcom: add a driver for Flexcom Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org ChangeLog v3: - remove MODULE_ALIAS() - add Acked-by from Boris Brezillon and Alexandre Belloni v2: - enhance the documentation of DT bindings and change the way the "ranges" property is used. - replace __raw_readl() and __raw_writel() by readl() and writel(). - change the module license to "GPL" for v2 or later - print the selected flexcom mode after the hardware version v1: This series of patches a support to the Atmel Flexcom, a wrapper which integrates an USART, a SPI controller and a TWI controller. Only one peripheral can be used at a time. The active function is selected though the Flexcom Mode Register. Cyrille Pitchen (2): mfd: devicetree: add bindings for Atmel Flexcom mfd: flexcom: add a driver for Atmel Flexible Serial Communication Unit .../devicetree/bindings/mfd/atmel-flexcom.txt | 58 +++++++++++++ drivers/mfd/Kconfig | 11 +++ drivers/mfd/Makefile | 1 + drivers/mfd/atmel-flexcom.c | 96 ++++++++++++++++++++++ 4 files changed, 166 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt create mode 100644 drivers/mfd/atmel-flexcom.c -- 1.8.2.2