[PATCH 01/11] ARM: shmobile: add r8a7793 minimal SoC device tree

[PATCH 01/11] ARM: shmobile: add r8a7793 minimal SoC device tree

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Minimal r8a7793 device tree including one CPU core, interrupt controllers,
timers, two serial ports, and the Ethernet controller, plus the required
clock descriptions.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7793.dtsi            | 367 ++++++++++++++++++++++++++++++
 include/dt-bindings/clock/r8a7793-clock.h | 164 +++++++++++++
 2 files changed, 531 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a7793.dtsi
 create mode 100644 include/dt-bindings/clock/r8a7793-clock.h

diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
new file mode 100644
index 000000000000..c50c5f65388a
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -0,0 +1,367 @@
+/*
+ * Device Tree Source for the r8a7793 SoC
+ *
+ * Copyright (C) 2014-2015 Renesas Electronics Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7793-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r8a7793";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+			voltage-tolerance = <1>; /* 1% */
+			clocks = <&cpg_clocks R8A7793_CLK_Z>;
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+		};
+	};
+
+	gic: interrupt-controller at f1001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0xf1001000 0 0x1000>,
+			<0 0xf1002000 0 0x1000>,
+			<0 0xf1004000 0 0x2000>,
+			<0 0xf1006000 0 0x2000>;
+		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	cmt0: timer at ffca0000 {
+		compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2";
+		reg = <0 0xffca0000 0 0x1004>;
+		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7793_CLK_CMT0>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0x60>;
+
+		status = "disabled";
+	};
+
+	cmt1: timer at e6130000 {
+		compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2";
+		reg = <0 0xe6130000 0 0x1004>;
+		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7793_CLK_CMT1>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0xff>;
+
+		status = "disabled";
+	};
+
+	irqc0: interrupt-controller at e61c0000 {
+		compatible = "renesas,irqc-r8a7793", "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0000 0 0x200>;
+		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A7793_CLK_IRQC>;
+	};
+
+	scif0: serial at e6e60000 {
+		compatible = "renesas,scif-r8a7793", "renesas,scif";
+		reg = <0 0xe6e60000 0 64>;
+		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial at e6e68000 {
+		compatible = "renesas,scif-r8a7793", "renesas,scif";
+		reg = <0 0xe6e68000 0 64>;
+		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	ether: ethernet at ee700000 {
+		compatible = "renesas,ether-r8a7793";
+		reg = <0 0xee700000 0 0x400>;
+		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7793_CLK_ETHER>;
+		phy-mode = "rmii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* External root clock */
+		extal_clk: extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "extal";
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks at e6150000 {
+			compatible = "renesas,r8a7793-cpg-clocks",
+				     "renesas,rcar-gen2-cpg-clocks";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll3",
+					     "lb", "qspi", "sdh", "sd0", "z",
+					     "rcan", "adsp";
+		};
+
+		/* Variable factor clocks */
+		sd2_clk: sd2_clk at e6150078 {
+			compatible = "renesas,r8a7793-div6-clock",
+				     "renesas,cpg-div6-clock";
+			reg = <0 0xe6150078 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sd2";
+		};
+		sd3_clk: sd3_clk at e615026c {
+			compatible = "renesas,r8a7793-div6-clock",
+				     "renesas,cpg-div6-clock";
+			reg = <0 0xe615026c 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sd3";
+		};
+		mmc0_clk: mmc0_clk at e6150240 {
+			compatible = "renesas,r8a7793-div6-clock",
+				     "renesas,cpg-div6-clock";
+			reg = <0 0xe6150240 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "mmc0";
+		};
+
+		/* Fixed factor clocks */
+		pll1_div2_clk: pll1_div2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "pll1_div2";
+		};
+		zg_clk: zg_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <5>;
+			clock-mult = <1>;
+			clock-output-names = "zg";
+		};
+		zx_clk: zx_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+			clock-output-names = "zx";
+		};
+		zs_clk: zs_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <6>;
+			clock-mult = <1>;
+			clock-output-names = "zs";
+		};
+		hp_clk: hp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+			clock-output-names = "hp";
+		};
+		p_clk: p_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <24>;
+			clock-mult = <1>;
+			clock-output-names = "p";
+		};
+		rclk_clk: rclk_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <(48 * 1024)>;
+			clock-mult = <1>;
+			clock-output-names = "rclk";
+		};
+		mp_clk: mp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <15>;
+			clock-mult = <1>;
+			clock-output-names = "mp";
+		};
+		cp_clk: cp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&extal_clk>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "cp";
+		};
+
+		/* Gate clocks */
+		mstp1_clks: mstp1_clks at e6150134 {
+			compatible = "renesas,r8a7793-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+			clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
+				 <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>,
+				 <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>,
+				 <&zs_clk>, <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_VCP0 R8A7793_CLK_VPC0
+				R8A7793_CLK_SSP1 R8A7793_CLK_TMU1
+				R8A7793_CLK_3DG R8A7793_CLK_2DDMAC
+				R8A7793_CLK_FDP1_1 R8A7793_CLK_FDP1_0
+				R8A7793_CLK_TMU3 R8A7793_CLK_TMU2
+				R8A7793_CLK_CMT0 R8A7793_CLK_TMU0
+				R8A7793_CLK_VSP1_DU1 R8A7793_CLK_VSP1_DU0
+				R8A7793_CLK_VSP1_S
+			>;
+			clock-output-names =
+				"vcp0", "vpc0", "ssp_dev", "tmu1",
+				"pvrsrvkm", "tddmac", "fdp1", "fdp0",
+				"tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
+				"vsp1-du0", "vsps";
+		};
+		mstp3_clks: mstp3_clks at e615013c {
+			compatible = "renesas,r8a7793-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+			clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>,
+				 <&cpg_clocks R8A7793_CLK_SD0>, <&mmc0_clk>,
+				 <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>,
+				 <&rclk_clk>, <&hp_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_TPU0 R8A7793_CLK_SDHI2
+				R8A7793_CLK_SDHI1 R8A7793_CLK_SDHI0
+				R8A7793_CLK_MMCIF0 R8A7793_CLK_IIC0
+				R8A7793_CLK_PCIEC R8A7793_CLK_IIC1
+				R8A7793_CLK_SSUSB R8A7793_CLK_CMT1
+				R8A7793_CLK_USBDMAC0 R8A7793_CLK_USBDMAC1
+			>;
+			clock-output-names =
+				"tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0",
+				"i2c7", "pciec", "i2c8", "ssusb", "cmt1",
+				"usbdmac0", "usbdmac1";
+		};
+		mstp4_clks: mstp4_clks at e6150140 {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+			clocks = <&cp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7793_CLK_IRQC>;
+			clock-output-names = "irqc";
+		};
+		mstp7_clks: mstp7_clks at e615014c {
+			compatible = "renesas,r8a7793-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+			clocks = <&mp_clk>,  <&hp_clk>, <&zs_clk>, <&p_clk>,
+				 <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
+				 <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>,
+				 <&zx_clk>, <&zx_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_EHCI R8A7793_CLK_HSUSB
+				R8A7793_CLK_HSCIF2 R8A7793_CLK_SCIF5
+				R8A7793_CLK_SCIF4 R8A7793_CLK_HSCIF1
+				R8A7793_CLK_HSCIF0 R8A7793_CLK_SCIF3
+				R8A7793_CLK_SCIF2 R8A7793_CLK_SCIF1
+				R8A7793_CLK_SCIF0 R8A7793_CLK_DU1
+				R8A7793_CLK_DU0 R8A7793_CLK_LVDS0
+			>;
+			clock-output-names =
+				"ehci", "hsusb", "hscif2", "scif5", "scif4",
+				"hscif1", "hscif0", "scif3", "scif2",
+				"scif1", "scif0", "du1", "du0", "lvds0";
+		};
+		mstp8_clks: mstp8_clks at e6150990 {
+			compatible = "renesas,r8a7793-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+			clocks = <&zx_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
+				 <&p_clk>, <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_IPMMU_SGX R8A7793_CLK_VIN2
+				R8A7793_CLK_VIN1 R8A7793_CLK_VIN0
+				R8A7793_CLK_ETHER R8A7793_CLK_SATA1
+				R8A7793_CLK_SATA0
+			>;
+			clock-output-names =
+				"ipmmu_sgx", "vin2", "vin1", "vin0", "ether",
+				"sata1", "sata0";
+		};
+	};
+
+};
diff --git a/include/dt-bindings/clock/r8a7793-clock.h b/include/dt-bindings/clock/r8a7793-clock.h
new file mode 100644
index 000000000000..1579e07f96a3
--- /dev/null
+++ b/include/dt-bindings/clock/r8a7793-clock.h
@@ -0,0 +1,164 @@
+/*
+ * r8a7793 clock definition
+ *
+ * Copyright (C) 2014  Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7793_H__
+#define __DT_BINDINGS_CLOCK_R8A7793_H__
+
+/* CPG */
+#define R8A7793_CLK_MAIN		0
+#define R8A7793_CLK_PLL0		1
+#define R8A7793_CLK_PLL1		2
+#define R8A7793_CLK_PLL3		3
+#define R8A7793_CLK_LB			4
+#define R8A7793_CLK_QSPI		5
+#define R8A7793_CLK_SDH			6
+#define R8A7793_CLK_SD0			7
+#define R8A7793_CLK_Z			8
+#define R8A7793_CLK_RCAN		9
+#define R8A7793_CLK_ADSP		10
+
+/* MSTP0 */
+#define R8A7793_CLK_MSIOF0		0
+
+/* MSTP1 */
+#define R8A7793_CLK_VCP0		1
+#define R8A7793_CLK_VPC0		3
+#define R8A7793_CLK_SSP1		9
+#define R8A7793_CLK_TMU1		11
+#define R8A7793_CLK_3DG			12
+#define R8A7793_CLK_2DDMAC		15
+#define R8A7793_CLK_FDP1_1		18
+#define R8A7793_CLK_FDP1_0		19
+#define R8A7793_CLK_TMU3		21
+#define R8A7793_CLK_TMU2		22
+#define R8A7793_CLK_CMT0		24
+#define R8A7793_CLK_TMU0		25
+#define R8A7793_CLK_VSP1_DU1		27
+#define R8A7793_CLK_VSP1_DU0		28
+#define R8A7793_CLK_VSP1_S		31
+
+/* MSTP2 */
+#define R8A7793_CLK_SCIFA2		2
+#define R8A7793_CLK_SCIFA1		3
+#define R8A7793_CLK_SCIFA0		4
+#define R8A7793_CLK_MSIOF2		5
+#define R8A7793_CLK_SCIFB0		6
+#define R8A7793_CLK_SCIFB1		7
+#define R8A7793_CLK_MSIOF1		8
+#define R8A7793_CLK_SCIFB2		16
+#define R8A7793_CLK_SYS_DMAC1		18
+#define R8A7793_CLK_SYS_DMAC0		19
+
+/* MSTP3 */
+#define R8A7793_CLK_TPU0		4
+#define R8A7793_CLK_SDHI2		11
+#define R8A7793_CLK_SDHI1		12
+#define R8A7793_CLK_SDHI0		14
+#define R8A7793_CLK_MMCIF0		15
+#define R8A7793_CLK_IIC0		18
+#define R8A7793_CLK_PCIEC		19
+#define R8A7793_CLK_IIC1		23
+#define R8A7793_CLK_SSUSB		28
+#define R8A7793_CLK_CMT1		29
+#define R8A7793_CLK_USBDMAC0		30
+#define R8A7793_CLK_USBDMAC1		31
+
+/* MSTP4 */
+#define R8A7793_CLK_IRQC		7
+
+/* MSTP5 */
+#define R8A7793_CLK_AUDIO_DMAC1         1
+#define R8A7793_CLK_AUDIO_DMAC0         2
+#define R8A7793_CLK_ADSP_MOD		6
+#define R8A7793_CLK_THERMAL		22
+#define R8A7793_CLK_PWM			23
+
+/* MSTP7 */
+#define R8A7793_CLK_EHCI		3
+#define R8A7793_CLK_HSUSB		4
+#define R8A7793_CLK_HSCIF2		13
+#define R8A7793_CLK_SCIF5		14
+#define R8A7793_CLK_SCIF4		15
+#define R8A7793_CLK_HSCIF1		16
+#define R8A7793_CLK_HSCIF0		17
+#define R8A7793_CLK_SCIF3		18
+#define R8A7793_CLK_SCIF2		19
+#define R8A7793_CLK_SCIF1		20
+#define R8A7793_CLK_SCIF0		21
+#define R8A7793_CLK_DU1			23
+#define R8A7793_CLK_DU0			24
+#define R8A7793_CLK_LVDS0		26
+
+/* MSTP8 */
+#define R8A7793_CLK_IPMMU_SGX		0
+#define R8A7793_CLK_VIN2		9
+#define R8A7793_CLK_VIN1		10
+#define R8A7793_CLK_VIN0		11
+#define R8A7793_CLK_ETHER		13
+#define R8A7793_CLK_SATA1		14
+#define R8A7793_CLK_SATA0		15
+
+/* MSTP9 */
+#define R8A7793_CLK_GPIO7		4
+#define R8A7793_CLK_GPIO6		5
+#define R8A7793_CLK_GPIO5		7
+#define R8A7793_CLK_GPIO4		8
+#define R8A7793_CLK_GPIO3		9
+#define R8A7793_CLK_GPIO2		10
+#define R8A7793_CLK_GPIO1		11
+#define R8A7793_CLK_GPIO0		12
+#define R8A7793_CLK_RCAN1		15
+#define R8A7793_CLK_RCAN0		16
+#define R8A7793_CLK_QSPI_MOD		17
+#define R8A7793_CLK_I2C5		25
+#define R8A7793_CLK_IICDVFS		26
+#define R8A7793_CLK_I2C4		27
+#define R8A7793_CLK_I2C3		28
+#define R8A7793_CLK_I2C2		29
+#define R8A7793_CLK_I2C1		30
+#define R8A7793_CLK_I2C0		31
+
+/* MSTP10 */
+#define R8A7793_CLK_SSI_ALL		5
+#define R8A7793_CLK_SSI9		6
+#define R8A7793_CLK_SSI8		7
+#define R8A7793_CLK_SSI7		8
+#define R8A7793_CLK_SSI6		9
+#define R8A7793_CLK_SSI5		10
+#define R8A7793_CLK_SSI4		11
+#define R8A7793_CLK_SSI3		12
+#define R8A7793_CLK_SSI2		13
+#define R8A7793_CLK_SSI1		14
+#define R8A7793_CLK_SSI0		15
+#define R8A7793_CLK_SCU_ALL		17
+#define R8A7793_CLK_SCU_DVC1		18
+#define R8A7793_CLK_SCU_DVC0		19
+#define R8A7793_CLK_SCU_SRC9		22
+#define R8A7793_CLK_SCU_SRC8		23
+#define R8A7793_CLK_SCU_SRC7		24
+#define R8A7793_CLK_SCU_SRC6		25
+#define R8A7793_CLK_SCU_SRC5		26
+#define R8A7793_CLK_SCU_SRC4		27
+#define R8A7793_CLK_SCU_SRC3		28
+#define R8A7793_CLK_SCU_SRC2		29
+#define R8A7793_CLK_SCU_SRC1		30
+#define R8A7793_CLK_SCU_SRC0		31
+
+/* MSTP11 */
+#define R8A7793_CLK_SCIFA3		6
+#define R8A7793_CLK_SCIFA4		7
+#define R8A7793_CLK_SCIFA5		8
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7793_H__ */
-- 
2.1.4

[PATCH 02/11] ARM: shmobile: r8a7793: add minimal Gose board device tree

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Minimal DT description and Makefile entry for the Gose eval board.
Support for console, timer, and Ethernet.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/Makefile         |  1 +
 arch/arm/boot/dts/r8a7793-gose.dts | 63 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 64 insertions(+)
 create mode 100644 arch/arm/boot/dts/r8a7793-gose.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 246473a244f6..679d7cc2f57c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -516,6 +516,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7790-lager.dtb \
 	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
+	r8a7793-gose.dtb \
 	r8a7794-alt.dtb \
 	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += \
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
new file mode 100644
index 000000000000..96443ec5f6ab
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -0,0 +1,63 @@
+/*
+ * Device Tree Source for the Gose board
+ *
+ * Copyright (C) 2014-2015 Renesas Electronics Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7793.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gose";
+	compatible = "renesas,gose", "renesas,r8a7793";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = &scif0;
+	};
+
+	memory at 40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&ether {
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy at 1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&scif0 {
+	status = "okay";
+};
+
+&scif1 {
+	status = "okay";
+};
-- 
2.1.4

[PATCH 03/11] ARM: shmobile: r8a7790: add EtherAVB clocks

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Add the EtherAVB clock to the R8A7790 device tree.

Based on original patch by Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi            | 10 ++++++----
 include/dt-bindings/clock/r8a7790-clock.h |  1 +
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 51ab8865ea37..feb4652ed4b2 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1249,16 +1249,18 @@
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
 			clocks = <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
-			         <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>;
+			         <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>,
+				 <&zs_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7790_CLK_MLB R8A7790_CLK_VIN3 R8A7790_CLK_VIN2
-				R8A7790_CLK_VIN1 R8A7790_CLK_VIN0 R8A7790_CLK_ETHER
+				R8A7790_CLK_VIN1 R8A7790_CLK_VIN0
+				R8A7790_CLK_ETHERAVB R8A7790_CLK_ETHER
 				R8A7790_CLK_SATA1 R8A7790_CLK_SATA0
 			>;
 			clock-output-names =
-				"mlb", "vin3", "vin2", "vin1", "vin0", "ether",
-				"sata1", "sata0";
+				"mlb", "vin3", "vin2", "vin1", "vin0",
+				"etheravb", "ether", "sata1", "sata0";
 		};
 		mstp9_clks: mstp9_clks at e6150994 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index ff7ca3584e16..e119ef372ba3 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -108,6 +108,7 @@
 #define R8A7790_CLK_VIN2		9
 #define R8A7790_CLK_VIN1		10
 #define R8A7790_CLK_VIN0		11
+#define R8A7790_CLK_ETHERAVB		12
 #define R8A7790_CLK_ETHER		13
 #define R8A7790_CLK_SATA1		14
 #define R8A7790_CLK_SATA0		15
-- 
2.1.4

[PATCH 04/11] ARM: shmobile: r8a7790: add EtherAVB DT support

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Define the generic R8A7790 part of the EtherAVB device node.

Based on original patch by Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index feb4652ed4b2..c9aae06319c0 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -671,6 +671,16 @@
 		status = "disabled";
 	};
 
+	avb: ethernet at e6800000 {
+		compatible = "renesas,etheravb-r8a7790";
+		reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+		interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	sata0: sata at ee300000 {
 		compatible = "renesas,sata-r8a7790";
 		reg = <0 0xee300000 0 0x2000>;
-- 
2.1.4

[PATCH 05/11] ARM: shmobile: armadillo800eva dts: Add pinctrl and gpio-hog for lcdc0

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Configure pinctrl and a GPIO-controller board mux for LCD use.
This allows the armadillo800eva board staging code to enable lcdc0.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 2e31d8c01cbf..105d9c95de4a 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -224,6 +224,9 @@
 };
 
 &pfc {
+	pinctrl-0 = <&lcd0_pins>;
+	pinctrl-names = "default";
+
 	ether_pins: ether {
 		renesas,groups = "gether_mii", "gether_int";
 		renesas,function = "gether";
@@ -259,6 +262,16 @@
 				 "fsia_data_in_1", "fsia_data_out_0";
 		renesas,function = "fsia";
 	};
+
+	lcd0_pins: lcd0 {
+		renesas,groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync";
+		renesas,function = "lcd0";
+
+		/* DBGMD/LCDC0/FSIA MUX */
+		gpio-hog;
+		gpios = <176 0>;
+		output-high;
+	};
 };
 
 &tpu {
-- 
2.1.4

[PATCH 06/11] ARM: shmobile: r8a73a4 dtsi: Use "arm,gic-400" for GIC

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Replace the "arm,cortex-a15-gic" compatible value for the GIC by
"arm,gic-400", as the documentation states it's a GIC-400.
This has been confirmed by reading the GICD_IIDR register, which reports
0x0200043b (GIC-400 = 0x02, ARM = 0x43b).

This has no effect on runtime behavior, as currently the GIC driver
treats both compatible values the same.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a73a4.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 7ee22a41c6c9..5090d1a8f652 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -434,7 +434,7 @@
 	};
 
 	gic: interrupt-controller at f1001000 {
-		compatible = "arm,cortex-a15-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
-- 
2.1.4

[PATCH 07/11] ARM: shmobile: r8a7790 dtsi: Use "arm,gic-400" for GIC

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Replace the "arm,cortex-a15-gic" compatible value for the GIC by
"arm,gic-400", as the R-Car Gen2 GIC is assumed to be a GIC-400.
This has been confirmed by reading the GICD_IIDR register (on r8a7791),
which reports 0x0200043b (GIC-400 = 0x02, ARM = 0x43b).

This has no effect on runtime behavior, as currently the GIC driver
treats both compatible values the same.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index c9aae06319c0..3ae0c3bfb9b9 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -113,7 +113,7 @@
 	};
 
 	gic: interrupt-controller at f1001000 {
-		compatible = "arm,cortex-a15-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
-- 
2.1.4

[PATCH 08/11] ARM: shmobile: r8a7791 dtsi: Use "arm,gic-400" for GIC

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Replace the "arm,cortex-a15-gic" compatible value for the GIC by
"arm,gic-400", as the R-Car Gen2 GIC is assumed to be a GIC-400.
This has been confirmed by reading the GICD_IIDR register, which reports
0x0200043b (GIC-400 = 0x02, ARM = 0x43b).

This has no effect on runtime behavior, as currently the GIC driver
treats both compatible values the same.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index dc1cd3f16606..07ea2bebe496 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -70,7 +70,7 @@
 	};
 
 	gic: interrupt-controller at f1001000 {
-		compatible = "arm,cortex-a15-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
-- 
2.1.4

[PATCH 09/11] ARM: shmobile: r8a7793 dtsi: Use "arm,gic-400" for GIC

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Replace the "arm,cortex-a15-gic" compatible value for the GIC by
"arm,gic-400", as the R-Car Gen2 GIC is assumed to be a GIC-400.
This has been confirmed by reading the GICD_IIDR register (on r8a7791),
which reports 0x0200043b (GIC-400 = 0x02, ARM = 0x43b).

This has no effect on runtime behavior, as currently the GIC driver
treats both compatible values the same.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7793.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index c50c5f65388a..3355c487d108 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -42,7 +42,7 @@
 	};
 
 	gic: interrupt-controller at f1001000 {
-		compatible = "arm,cortex-a15-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
-- 
2.1.4

[PATCH 10/11] ARM: shmobile: r8a7794 dtsi: Use "arm,gic-400" for GIC

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Replace the "arm,cortex-a15-gic" compatible value for the GIC by
"arm,gic-400", as the R-Car Gen2 GIC is assumed to be a GIC-400.
This has been confirmed by reading the GICD_IIDR register (on r8a7791),
which reports 0x0200043b (GIC-400 = 0x02, ARM = 0x43b).

This has no effect on runtime behavior, as currently the GIC driver
treats both compatible values the same.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index b73819423311..8824dbd5dbb4 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -39,7 +39,7 @@
 	};
 
 	gic: interrupt-controller at f1001000 {
-		compatible = "arm,cortex-a7-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
-- 
2.1.4

[GIT PULL] Renesas ARM Based SoC DT Updates for v4.3

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC DT updates for v4.3.


The following changes since commit d770e558e21961ad6cfdf0ff7df0eb5d7d4f0754:

  Linux 4.2-rc1 (2015-07-05 11:01:52 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.3

for you to fetch changes up to 7bf46d0be278a3586c78322c65ceff5fd03bb95d:

  ARM: shmobile: r8a7779: Configure IRLM mode via DT (2015-07-06 09:33:41 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC DT Updates for v4.3

* Configure IRLM mode via DT on r8a7779 SoC
* Use "arm,gic-400" for GIC on r8a777[01349] and r8a73a4 SoCs
* Add pinctrl and gpio-hog for lcdc0 to armadillo800eva board
* EtherAVB DT support for r8a7790 SoC
* Minimal device tree for r8a7793 SoC and its Gose board

----------------------------------------------------------------
Geert Uytterhoeven (6):
      ARM: shmobile: armadillo800eva dts: Add pinctrl and gpio-hog for lcdc0
      ARM: shmobile: r8a73a4 dtsi: Use "arm,gic-400" for GIC
      ARM: shmobile: r8a7790 dtsi: Use "arm,gic-400" for GIC
      ARM: shmobile: r8a7791 dtsi: Use "arm,gic-400" for GIC
      ARM: shmobile: r8a7793 dtsi: Use "arm,gic-400" for GIC
      ARM: shmobile: r8a7794 dtsi: Use "arm,gic-400" for GIC

Magnus Damm (1):
      ARM: shmobile: r8a7779: Configure IRLM mode via DT

Sergei Shtylyov (2):
      ARM: shmobile: r8a7790: add EtherAVB clocks
      ARM: shmobile: r8a7790: add EtherAVB DT support

Ulrich Hecht (2):
      ARM: shmobile: add r8a7793 minimal SoC device tree
      ARM: shmobile: r8a7793: add minimal Gose board device tree

 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/r8a73a4.dtsi                |   2 +-
 arch/arm/boot/dts/r8a7740-armadillo800eva.dts |  13 +
 arch/arm/boot/dts/r8a7779.dtsi                |   5 +-
 arch/arm/boot/dts/r8a7790.dtsi                |  22 +-
 arch/arm/boot/dts/r8a7791.dtsi                |   2 +-
 arch/arm/boot/dts/r8a7793-gose.dts            |  63 +++++
 arch/arm/boot/dts/r8a7793.dtsi                | 367 ++++++++++++++++++++++++++
 arch/arm/boot/dts/r8a7794.dtsi                |   2 +-
 include/dt-bindings/clock/r8a7790-clock.h     |   1 +
 include/dt-bindings/clock/r8a7793-clock.h     | 164 ++++++++++++
 11 files changed, 632 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/boot/dts/r8a7793-gose.dts
 create mode 100644 arch/arm/boot/dts/r8a7793.dtsi
 create mode 100644 include/dt-bindings/clock/r8a7793-clock.h

[PATCH 11/11] ARM: shmobile: r8a7779: Configure IRLM mode via DT

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Adjust the r8a7779 SoC DTS and the Marzen Reference
C board code to use DTS only for INTC-IRQPIN IRLM setup.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7779.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 5c8071e87ae9..a2b5430d3257 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -148,7 +148,7 @@
 		interrupt-controller;
 	};
 
-	irqpin0: interrupt-controller at fe780010 {
+	irqpin0: interrupt-controller at fe78001c {
 		compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
 		status = "disabled";
@@ -157,7 +157,8 @@
 			<0xfe780010 4>,
 			<0xfe780024 4>,
 			<0xfe780044 4>,
-			<0xfe780064 4>;
+			<0xfe780064 4>,
+			<0xfe780000 4>;
 		interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
 			      0 28 IRQ_TYPE_LEVEL_HIGH
 			      0 29 IRQ_TYPE_LEVEL_HIGH
-- 
2.1.4

[GIT PULL] Renesas ARM Based SoC DT Updates for v4.3

[Olof Johansson]

On Fri, Jul 10, 2015 at 03:37:19PM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these Renesas ARM based SoC DT updates for v4.3.
> 
> 
> The following changes since commit d770e558e21961ad6cfdf0ff7df0eb5d7d4f0754:
> 
>   Linux 4.2-rc1 (2015-07-05 11:01:52 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.3
> 
> for you to fetch changes up to 7bf46d0be278a3586c78322c65ceff5fd03bb95d:
> 
>   ARM: shmobile: r8a7779: Configure IRLM mode via DT (2015-07-06 09:33:41 +0900)

Thanks, merged into next/dt.


-Olof