* [PATCH 01/14] arm64: dts: r8a7795: Add L2 cache-controller nodes
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-26 0:07 ` Simon Horman
2016-02-26 0:07 ` [PATCH 02/14] arm64: dts: r8a7795: pmu: switch to Cortex specific device nodes Simon Horman
` (13 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Simon Horman @ 2016-02-26 0:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add device nodes for the L2 caches, and link the CPU node to its L2
cache node.
The L2 cache for the Cortex-A57 CPU cores is 2 MiB large (organized as
128 KiB x 16 ways).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 9634e3a4858e..3f00e85641a8 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -39,6 +39,7 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x0>;
device_type = "cpu";
+ next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
@@ -46,22 +47,29 @@
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x1>;
device_type = "cpu";
+ next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
a57_2: cpu at 2 {
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x2>;
device_type = "cpu";
+ next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
a57_3: cpu at 3 {
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x3>;
device_type = "cpu";
+ next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
};
+ L2_CA57: cache-controller at 0 {
+ compatible = "cache";
+ };
+
extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 02/14] arm64: dts: r8a7795: pmu: switch to Cortex specific device nodes
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
2016-02-26 0:07 ` [PATCH 01/14] arm64: dts: r8a7795: Add L2 cache-controller nodes Simon Horman
@ 2016-02-26 0:07 ` Simon Horman
2016-02-26 0:07 ` [PATCH 03/14] arm64: dts: r8a7795: use GIC_* defines Simon Horman
` (12 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Simon Horman @ 2016-02-26 0:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Dirk Behme <dirk.behme@gmail.com>
Instead of using the generic armv8-pmuv3 compatibility use the more
specific Cortex A57 compatibility.
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 3f00e85641a8..b5e46e4ff72a 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -246,8 +246,8 @@
power-domains = <&cpg>;
};
- pmu {
- compatible = "arm,armv8-pmuv3";
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 03/14] arm64: dts: r8a7795: use GIC_* defines
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
2016-02-26 0:07 ` [PATCH 01/14] arm64: dts: r8a7795: Add L2 cache-controller nodes Simon Horman
2016-02-26 0:07 ` [PATCH 02/14] arm64: dts: r8a7795: pmu: switch to Cortex specific device nodes Simon Horman
@ 2016-02-26 0:07 ` Simon Horman
2016-02-26 0:07 ` [PATCH 04/14] arm64: dts: r8a7795: Add missing properties to CA57 L2 cache node Simon Horman
` (11 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Simon Horman @ 2016-02-26 0:07 UTC (permalink / raw)
To: linux-arm-kernel
Use GIC_* defines for GIC interrupt cells in r8a7795 device tree.
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 108 +++++++++++++++----------------
1 file changed, 54 insertions(+), 54 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index b5e46e4ff72a..832a5665bb27 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -282,23 +282,23 @@
audma0: dma-controller at ec700000 {
compatible = "renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <0 350 IRQ_TYPE_LEVEL_HIGH
- 0 320 IRQ_TYPE_LEVEL_HIGH
- 0 321 IRQ_TYPE_LEVEL_HIGH
- 0 322 IRQ_TYPE_LEVEL_HIGH
- 0 323 IRQ_TYPE_LEVEL_HIGH
- 0 324 IRQ_TYPE_LEVEL_HIGH
- 0 325 IRQ_TYPE_LEVEL_HIGH
- 0 326 IRQ_TYPE_LEVEL_HIGH
- 0 327 IRQ_TYPE_LEVEL_HIGH
- 0 328 IRQ_TYPE_LEVEL_HIGH
- 0 329 IRQ_TYPE_LEVEL_HIGH
- 0 330 IRQ_TYPE_LEVEL_HIGH
- 0 331 IRQ_TYPE_LEVEL_HIGH
- 0 332 IRQ_TYPE_LEVEL_HIGH
- 0 333 IRQ_TYPE_LEVEL_HIGH
- 0 334 IRQ_TYPE_LEVEL_HIGH
- 0 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -314,23 +314,23 @@
audma1: dma-controller at ec720000 {
compatible = "renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
- interrupts = <0 351 IRQ_TYPE_LEVEL_HIGH
- 0 336 IRQ_TYPE_LEVEL_HIGH
- 0 337 IRQ_TYPE_LEVEL_HIGH
- 0 338 IRQ_TYPE_LEVEL_HIGH
- 0 339 IRQ_TYPE_LEVEL_HIGH
- 0 340 IRQ_TYPE_LEVEL_HIGH
- 0 341 IRQ_TYPE_LEVEL_HIGH
- 0 342 IRQ_TYPE_LEVEL_HIGH
- 0 343 IRQ_TYPE_LEVEL_HIGH
- 0 344 IRQ_TYPE_LEVEL_HIGH
- 0 345 IRQ_TYPE_LEVEL_HIGH
- 0 346 IRQ_TYPE_LEVEL_HIGH
- 0 347 IRQ_TYPE_LEVEL_HIGH
- 0 348 IRQ_TYPE_LEVEL_HIGH
- 0 349 IRQ_TYPE_LEVEL_HIGH
- 0 382 IRQ_TYPE_LEVEL_HIGH
- 0 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -804,52 +804,52 @@
rcar_sound,src {
src0: src at 0 {
- interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x85>, <&audma1 0x9a>;
dma-names = "rx", "tx";
};
src1: src at 1 {
- interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x87>, <&audma1 0x9c>;
dma-names = "rx", "tx";
};
src2: src at 2 {
- interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x89>, <&audma1 0x9e>;
dma-names = "rx", "tx";
};
src3: src at 3 {
- interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8b>, <&audma1 0xa0>;
dma-names = "rx", "tx";
};
src4: src at 4 {
- interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8d>, <&audma1 0xb0>;
dma-names = "rx", "tx";
};
src5: src at 5 {
- interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8f>, <&audma1 0xb2>;
dma-names = "rx", "tx";
};
src6: src at 6 {
- interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x91>, <&audma1 0xb4>;
dma-names = "rx", "tx";
};
src7: src at 7 {
- interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x93>, <&audma1 0xb6>;
dma-names = "rx", "tx";
};
src8: src at 8 {
- interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x95>, <&audma1 0xb8>;
dma-names = "rx", "tx";
};
src9: src at 9 {
- interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x97>, <&audma1 0xba>;
dma-names = "rx", "tx";
};
@@ -857,52 +857,52 @@
rcar_sound,ssi {
ssi0: ssi at 0 {
- interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi at 1 {
- interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi2: ssi at 2 {
- interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi3: ssi at 3 {
- interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi4: ssi at 4 {
- interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi5: ssi at 5 {
- interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi6: ssi at 6 {
- interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi7: ssi at 7 {
- interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi8: ssi at 8 {
- interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi9: ssi at 9 {
- interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
dma-names = "rx", "tx", "rxu", "txu";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 04/14] arm64: dts: r8a7795: Add missing properties to CA57 L2 cache node
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
` (2 preceding siblings ...)
2016-02-26 0:07 ` [PATCH 03/14] arm64: dts: r8a7795: use GIC_* defines Simon Horman
@ 2016-02-26 0:07 ` Simon Horman
2016-02-26 0:07 ` [PATCH 05/14] arm64: dts: r8a7795: Add CA53 L2 cache-controller node Simon Horman
` (10 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Simon Horman @ 2016-02-26 0:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add the missing "cache-unified" and "cache-level" properties to the
Cortex-A57 cache-controller node.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 832a5665bb27..ea56066c2260 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -68,6 +68,8 @@
L2_CA57: cache-controller at 0 {
compatible = "cache";
+ cache-unified;
+ cache-level = <2>;
};
extal_clk: extal {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 05/14] arm64: dts: r8a7795: Add CA53 L2 cache-controller node
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
` (3 preceding siblings ...)
2016-02-26 0:07 ` [PATCH 04/14] arm64: dts: r8a7795: Add missing properties to CA57 L2 cache node Simon Horman
@ 2016-02-26 0:07 ` Simon Horman
2016-02-26 0:07 ` [PATCH 06/14] arm64: dts: r8a7795: Add INTC-EX device node Simon Horman
` (9 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Simon Horman @ 2016-02-26 0:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Cortex-A53 L2 cache-controller.
The L2 cache for the Cortex-A53 CPU cores is 512 KiB large (organized as
32 KiB x 16 ways).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index ea56066c2260..e32b652c8fd0 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -72,6 +72,12 @@
cache-level = <2>;
};
+ L2_CA53: cache-controller at 1 {
+ compatible = "cache";
+ cache-unified;
+ cache-level = <2>;
+ };
+
extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 06/14] arm64: dts: r8a7795: Add INTC-EX device node
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
` (4 preceding siblings ...)
2016-02-26 0:07 ` [PATCH 05/14] arm64: dts: r8a7795: Add CA53 L2 cache-controller node Simon Horman
@ 2016-02-26 0:07 ` Simon Horman
2016-02-26 0:07 ` [PATCH 07/14] arm64: dts: r8a7795: Add GIC-400 virtual interfaces Simon Horman
` (8 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Simon Horman @ 2016-02-26 0:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm+renesas@opensource.se>
Add a single r8a7795 INTC-EX device node to support
external IRQ pins IRQ0 -> IRQ5.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index e32b652c8fd0..6da8f79f10df 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -356,6 +356,21 @@
reg = <0 0xe6060000 0 0x50c>;
};
+ intc_ex: interrupt-controller at e61c0000 {
+ compatible = "renesas,intc-ex-r8a7795", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ power-domains = <&cpg>;
+ };
+
dmac0: dma-controller at e6700000 {
compatible = "renesas,dmac-r8a7795",
"renesas,rcar-dmac";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 07/14] arm64: dts: r8a7795: Add GIC-400 virtual interfaces
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
` (5 preceding siblings ...)
2016-02-26 0:07 ` [PATCH 06/14] arm64: dts: r8a7795: Add INTC-EX device node Simon Horman
@ 2016-02-26 0:07 ` Simon Horman
2016-02-26 0:07 ` [PATCH 08/14] arm64: dts: r8a7795: Add SDHI support to dtsi Simon Horman
` (7 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Simon Horman @ 2016-02-26 0:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Dirk Behme <dirk.behme@de.bosch.com>
Besides the distributor and the CPU interface the GIC-400 additionally
supports the virtual interface control blocks and the virtual CPU interfaces.
Add the physical base addresses and size for these.
See
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0471b/index.html
-> 3.2. GIC-400 register map
and Linux kernel's
Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
for more details.
For the at GICH Virtual interface control blocks at 0xf1040000 cover the
whole 128kB (0x20000) range. This is done based on the advice from Marc
Zyngier http://www.spinics.net/lists/arm-kernel/msg483139.html
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 6da8f79f10df..1072c681f8b4 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -137,7 +137,9 @@
#address-cells = <0>;
interrupt-controller;
reg = <0x0 0xf1010000 0 0x1000>,
- <0x0 0xf1020000 0 0x2000>;
+ <0x0 0xf1020000 0 0x2000>,
+ <0x0 0xf1040000 0 0x20000>,
+ <0x0 0xf1060000 0 0x2000>;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 08/14] arm64: dts: r8a7795: Add SDHI support to dtsi
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
` (6 preceding siblings ...)
2016-02-26 0:07 ` [PATCH 07/14] arm64: dts: r8a7795: Add GIC-400 virtual interfaces Simon Horman
@ 2016-02-26 0:07 ` Simon Horman
2016-02-26 0:07 ` [PATCH 09/14] arm64: dts: r8a7795: salvator-x: enable SDHI0 & 3 Simon Horman
` (6 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Simon Horman @ 2016-02-26 0:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Ai Kyuse <ai.kyuse.uw@renesas.com>
Signed-off-by: Ai Kyuse <ai.kyuse.uw@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[wsa: squashed some fixes and added mmc-caps]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 38 ++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 1072c681f8b4..c2bffd160c18 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -985,5 +985,43 @@
#dma-cells = <1>;
dma-channels = <2>;
};
+
+ sdhi0: sd at ee100000 {
+ compatible = "renesas,sdhi-r8a7795";
+ reg = <0 0xee100000 0 0x2000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sdhi1: sd at ee120000 {
+ compatible = "renesas,sdhi-r8a7795";
+ reg = <0 0xee120000 0 0x2000>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 313>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sdhi2: sd at ee140000 {
+ compatible = "renesas,sdhi-r8a7795";
+ reg = <0 0xee140000 0 0x2000>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ power-domains = <&cpg>;
+ cap-mmc-highspeed;
+ status = "disabled";
+ };
+
+ sdhi3: sd at ee160000 {
+ compatible = "renesas,sdhi-r8a7795";
+ reg = <0 0xee160000 0 0x2000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ power-domains = <&cpg>;
+ cap-mmc-highspeed;
+ status = "disabled";
+ };
};
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 09/14] arm64: dts: r8a7795: salvator-x: enable SDHI0 & 3
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
` (7 preceding siblings ...)
2016-02-26 0:07 ` [PATCH 08/14] arm64: dts: r8a7795: Add SDHI support to dtsi Simon Horman
@ 2016-02-26 0:07 ` Simon Horman
2016-02-26 0:07 ` [PATCH 10/14] arm64: dts: r8a7795: use fallback etheravb compatibility string Simon Horman
` (5 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Simon Horman @ 2016-02-26 0:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Ai Kyuse <ai.kyuse.uw@renesas.com>
Add the exposed SD card slots. The on-board eMMC needs to wait until we
fixed the 8bit support.
Signed-off-by: Ai Kyuse <ai.kyuse.uw@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 83 ++++++++++++++++++++++
1 file changed, 83 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 31ace9c1f79d..1af67579e07a 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -33,6 +33,7 @@
/dts-v1/;
#include "r8a7795.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Renesas Salvator-X board based on r8a7795";
@@ -61,6 +62,54 @@
clock-frequency = <24576000>;
};
+ vcc_sdhi0: regulator at 1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator at 2 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ vcc_sdhi3: regulator at 3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI3 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi3: regulator at 4 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI3 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
audio_clkout: audio_clkout {
/*
* This is same as <&rcar_sound 0>
@@ -119,6 +168,16 @@
renesas,function = "avb";
};
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi3_pins: sd3 {
+ renesas,groups = "sdhi3_data4", "sdhi3_ctrl";
+ renesas,function = "sdhi3";
+ };
+
sound_pins: sound {
renesas,groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
renesas,function = "ssi";
@@ -228,6 +287,30 @@
status = "okay";
};
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&sdhi3 {
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi3>;
+ vqmmc-supply = <&vccq_sdhi3>;
+ cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ status = "okay";
+};
+
&ssi1 {
shared-pin;
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 10/14] arm64: dts: r8a7795: use fallback etheravb compatibility string
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
` (8 preceding siblings ...)
2016-02-26 0:07 ` [PATCH 09/14] arm64: dts: r8a7795: salvator-x: enable SDHI0 & 3 Simon Horman
@ 2016-02-26 0:07 ` Simon Horman
2016-02-26 0:07 ` [PATCH 11/14] arm64: dts: r8a7795: add usb2_phy device nodes Simon Horman
` (4 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Simon Horman @ 2016-02-26 0:07 UTC (permalink / raw)
To: linux-arm-kernel
Use recently added fallback compatibility string in r8a7795 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index c2bffd160c18..e9adb31cd48c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -473,7 +473,8 @@
};
avb: ethernet at e6800000 {
- compatible = "renesas,etheravb-r8a7795";
+ compatible = "renesas,etheravb-r8a7795",
+ "renesas,etheravb-rcar-gen3";
reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 11/14] arm64: dts: r8a7795: add usb2_phy device nodes
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
` (9 preceding siblings ...)
2016-02-26 0:07 ` [PATCH 10/14] arm64: dts: r8a7795: use fallback etheravb compatibility string Simon Horman
@ 2016-02-26 0:07 ` Simon Horman
2016-02-26 0:07 ` [PATCH 12/14] arm64: dts: r8a7795: add USB2.0 Host (EHCI/OHCI) " Simon Horman
` (3 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Simon Horman @ 2016-02-26 0:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index e9adb31cd48c..c6e379000e90 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -1024,5 +1024,33 @@
cap-mmc-highspeed;
status = "disabled";
};
+
+ usb2_phy0: usb-phy at ee080200 {
+ compatible = "renesas,usb2-phy-r8a7795";
+ reg = <0 0xee080200 0 0x700>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&cpg>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb2_phy1: usb-phy at ee0a0200 {
+ compatible = "renesas,usb2-phy-r8a7795";
+ reg = <0 0xee0a0200 0 0x700>;
+ clocks = <&cpg CPG_MOD 702>;
+ power-domains = <&cpg>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb2_phy2: usb-phy at ee0c0200 {
+ compatible = "renesas,usb2-phy-r8a7795";
+ reg = <0 0xee0c0200 0 0x700>;
+ clocks = <&cpg CPG_MOD 701>;
+ power-domains = <&cpg>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 12/14] arm64: dts: r8a7795: add USB2.0 Host (EHCI/OHCI) device nodes
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
` (10 preceding siblings ...)
2016-02-26 0:07 ` [PATCH 11/14] arm64: dts: r8a7795: add usb2_phy device nodes Simon Horman
@ 2016-02-26 0:07 ` Simon Horman
2016-02-26 0:07 ` [PATCH 13/14] arm64: dts: salvator-x: enable usb2_phy of channel 1 and 2 Simon Horman
` (2 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Simon Horman @ 2016-02-26 0:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 66 ++++++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index c6e379000e90..a7315ebe3883 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -1052,5 +1052,71 @@
#phy-cells = <0>;
status = "disabled";
};
+
+ ehci0: usb at ee080100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee080100 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci1: usb at ee0a0100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee0a0100 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci2: usb at ee0c0100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee0c0100 0 0x100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 701>;
+ phys = <&usb2_phy2>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ohci0: usb at ee080000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee080000 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ohci1: usb at ee0a0000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee0a0000 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ohci2: usb at ee0c0000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee0c0000 0 0x100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 701>;
+ phys = <&usb2_phy2>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
};
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 13/14] arm64: dts: salvator-x: enable usb2_phy of channel 1 and 2
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
` (11 preceding siblings ...)
2016-02-26 0:07 ` [PATCH 12/14] arm64: dts: r8a7795: add USB2.0 Host (EHCI/OHCI) " Simon Horman
@ 2016-02-26 0:07 ` Simon Horman
2016-02-26 0:07 ` [PATCH 14/14] arm64: dts: salvator-x: enable USB 2.0 Host " Simon Horman
2016-02-29 15:21 ` [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Arnd Bergmann
14 siblings, 0 replies; 16+ messages in thread
From: Simon Horman @ 2016-02-26 0:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
This board has a MAX3355 chip. However, we cannot use the extcon/max3355
driver because the ID pin doesn't connect to a gpio pin (in other words,
it connects to the SoC specific pin).
And, the phy-rcar-gen3-usb2 driver cannot handle such a chip for now.
So, this patch enables usb2_phy of channel 1 and 2.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 1af67579e07a..e415535d2b63 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -188,6 +188,16 @@
"audio_clkout_a", "audio_clkout3_a";
renesas,function = "audio_clk";
};
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
+
+ usb2_pins: usb2 {
+ renesas,groups = "usb2";
+ renesas,function = "usb2";
+ };
};
&scif1 {
@@ -348,3 +358,17 @@
&xhci0 {
status = "okay";
};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usb2_phy2 {
+ pinctrl-0 = <&usb2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 14/14] arm64: dts: salvator-x: enable USB 2.0 Host of channel 1 and 2
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
` (12 preceding siblings ...)
2016-02-26 0:07 ` [PATCH 13/14] arm64: dts: salvator-x: enable usb2_phy of channel 1 and 2 Simon Horman
@ 2016-02-26 0:07 ` Simon Horman
2016-02-29 15:21 ` [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Arnd Bergmann
14 siblings, 0 replies; 16+ messages in thread
From: Simon Horman @ 2016-02-26 0:07 UTC (permalink / raw)
To: linux-arm-kernel
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
We should set SW15 to pin 2-3 side on the board before we use CN9
as USB host or peripheral.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index e415535d2b63..b992b1a3d956 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -372,3 +372,19 @@
status = "okay";
};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 16+ messages in thread* [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6
2016-02-26 0:07 [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.6 Simon Horman
` (13 preceding siblings ...)
2016-02-26 0:07 ` [PATCH 14/14] arm64: dts: salvator-x: enable USB 2.0 Host " Simon Horman
@ 2016-02-29 15:21 ` Arnd Bergmann
14 siblings, 0 replies; 16+ messages in thread
From: Arnd Bergmann @ 2016-02-29 15:21 UTC (permalink / raw)
To: linux-arm-kernel
On Friday 26 February 2016 09:07:32 Simon Horman wrote:
> Please consider these second round of Renesas ARM64 based SoC DT updates
> for v4.6.
>
> This pull request is based on the previous round of
> such requests, tagged as renesas-arm64-dt-for-v4.6,
> which you have already pulled.
Pulled into next/dt64, thanks!
Arnd
^ permalink raw reply [flat|nested] 16+ messages in thread