* [PATCH 01/30] ARM: dts: r8a7793: Add MMCIF0
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 02/30] ARM: dts: bockw: SCIF0 supports RTS/CTS hardware flow control Simon Horman
` (29 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Same as on r8a7791.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 1dd6d202cd4c..76c8435f283c 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -543,6 +543,19 @@
status = "disabled";
};
+ mmcif0: mmc at ee200000 {
+ compatible = "renesas,mmcif-r8a7793", "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7793_CLK_MMCIF0>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ reg-io-width = <4>;
+ status = "disabled";
+ max-frequency = <97500000>;
+ };
+
scifa0: serial at e6c40000 {
compatible = "renesas,scifa-r8a7793",
"renesas,rcar-gen2-scifa", "renesas,scifa";
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 02/30] ARM: dts: bockw: SCIF0 supports RTS/CTS hardware flow control
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
2016-06-08 0:59 ` [PATCH 01/30] ARM: dts: r8a7793: Add MMCIF0 Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 03/30] ARM: dts: kzm9g: SCIFA4 " Simon Horman
` (28 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
On the BOCK-W development board, the RTS and CTS pins of the console
SCIF0 are wired to the "product serial" connector. Reflect this in the
DTS by adding the "uart-has-rtscts" property to the scif0 device node.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778-bockw.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index e0dab1464648..982a237ea622 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -223,6 +223,7 @@
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
+ uart-has-rtscts;
status = "okay";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 03/30] ARM: dts: kzm9g: SCIFA4 supports RTS/CTS hardware flow control
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
2016-06-08 0:59 ` [PATCH 01/30] ARM: dts: r8a7793: Add MMCIF0 Simon Horman
2016-06-08 0:59 ` [PATCH 02/30] ARM: dts: bockw: SCIF0 supports RTS/CTS hardware flow control Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 04/30] ARM: dts: r8a7790: Correct unit names for cpu nodes Simon Horman
` (27 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
On the KZM-A9-GT development board, the RTS and CTS pins of the debug
console SCIFA4 are wired to the CP2102 Serial-USB bridge. Reflect
this in the DTS by adding the "uart-has-rtscts" property to the scifa4
device node.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0-kzm9g.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index c2d8a080e392..9881adf1734e 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -378,6 +378,7 @@
pinctrl-0 = <&scifa4_pins>;
pinctrl-names = "default";
+ uart-has-rtscts;
status = "okay";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 04/30] ARM: dts: r8a7790: Correct unit names for cpu nodes
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (2 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 03/30] ARM: dts: kzm9g: SCIFA4 " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 05/30] ARM: dts: r8a7790: Reference both DMA controllers Simon Horman
` (26 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Make the unit names for the cpu nodes match their reg properties.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 83cf23cd26bb..3b9e98be2f7b 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -92,7 +92,7 @@
next-level-cache = <&L2_CA15>;
};
- cpu4: cpu at 4 {
+ cpu4: cpu at 100 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x100>;
@@ -101,7 +101,7 @@
next-level-cache = <&L2_CA7>;
};
- cpu5: cpu at 5 {
+ cpu5: cpu at 101 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x101>;
@@ -110,7 +110,7 @@
next-level-cache = <&L2_CA7>;
};
- cpu6: cpu at 6 {
+ cpu6: cpu at 102 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x102>;
@@ -119,7 +119,7 @@
next-level-cache = <&L2_CA7>;
};
- cpu7: cpu at 7 {
+ cpu7: cpu at 103 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x103>;
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 05/30] ARM: dts: r8a7790: Reference both DMA controllers
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (3 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 04/30] ARM: dts: r8a7790: Correct unit names for cpu nodes Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 06/30] ARM: dts: r8a7791: " Simon Horman
` (25 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can choose which one to
use.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 130 ++++++++++++++++++++++++-----------------
1 file changed, 78 insertions(+), 52 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 3b9e98be2f7b..97f4c1dc3ae8 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -517,8 +517,9 @@
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -530,8 +531,9 @@
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
- dmas = <&dmac0 0x65>, <&dmac0 0x66>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -543,8 +545,9 @@
reg = <0 0xe6520000 0 0x425>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
- dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x69>, <&dmac0 0x6a>,
+ <&dmac1 0x69>, <&dmac1 0x6a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -556,8 +559,9 @@
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
- dmas = <&dmac0 0x77>, <&dmac0 0x78>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -567,8 +571,9 @@
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
- dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
@@ -580,8 +585,9 @@
reg = <0 0xee220000 0 0x80>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
- dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xe1>, <&dmac0 0xe2>,
+ <&dmac1 0xe1>, <&dmac1 0xe2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
@@ -598,8 +604,9 @@
reg = <0 0xee100000 0 0x328>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
- dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+ <&dmac1 0xcd>, <&dmac1 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
@@ -610,8 +617,9 @@
reg = <0 0xee120000 0 0x328>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
- dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xc9>, <&dmac0 0xca>,
+ <&dmac1 0xc9>, <&dmac1 0xca>;
+ dma-names = "tx", "rx", "tx", "rx";
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
@@ -622,8 +630,9 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
- dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+ <&dmac1 0xc1>, <&dmac1 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
@@ -634,8 +643,9 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
- dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+ <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
@@ -648,8 +658,9 @@
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
clock-names = "fck";
- dmas = <&dmac0 0x21>, <&dmac0 0x22>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -661,8 +672,9 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
clock-names = "fck";
- dmas = <&dmac0 0x25>, <&dmac0 0x26>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -674,8 +686,9 @@
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
clock-names = "fck";
- dmas = <&dmac0 0x27>, <&dmac0 0x28>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -687,8 +700,9 @@
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
clock-names = "fck";
- dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -700,8 +714,9 @@
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
clock-names = "fck";
- dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -713,8 +728,9 @@
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
clock-names = "fck";
- dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -727,8 +743,9 @@
clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -741,8 +758,9 @@
clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -755,8 +773,9 @@
clocks = <&mstp3_clks R8A7790_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -769,8 +788,9 @@
clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -783,8 +803,9 @@
clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1469,8 +1490,9 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
@@ -1483,8 +1505,9 @@
reg = <0 0xe6e20000 0 0x0064>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
- dmas = <&dmac0 0x51>, <&dmac0 0x52>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+ <&dmac1 0x51>, <&dmac1 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1496,8 +1519,9 @@
reg = <0 0xe6e10000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
- dmas = <&dmac0 0x55>, <&dmac0 0x56>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+ <&dmac1 0x55>, <&dmac1 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1509,8 +1533,9 @@
reg = <0 0xe6e00000 0 0x0064>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
- dmas = <&dmac0 0x41>, <&dmac0 0x42>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+ <&dmac1 0x41>, <&dmac1 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1522,8 +1547,9 @@
reg = <0 0xe6c90000 0 0x0064>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
- dmas = <&dmac0 0x45>, <&dmac0 0x46>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x45>, <&dmac0 0x46>,
+ <&dmac1 0x45>, <&dmac1 0x46>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 06/30] ARM: dts: r8a7791: Reference both DMA controllers
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (4 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 05/30] ARM: dts: r8a7790: Reference both DMA controllers Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 07/30] ARM: dts: r8a7793: " Simon Horman
` (24 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can choose which one to
use.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 145 ++++++++++++++++++++++++-----------------
1 file changed, 87 insertions(+), 58 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index db67e342c585..2f924146d381 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -514,8 +514,9 @@
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
- dmas = <&dmac0 0x77>, <&dmac0 0x78>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -527,8 +528,9 @@
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -540,8 +542,9 @@
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
- dmas = <&dmac0 0x65>, <&dmac0 0x66>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -556,8 +559,9 @@
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
- dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
@@ -569,8 +573,9 @@
reg = <0 0xee100000 0 0x328>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
- dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+ <&dmac1 0xcd>, <&dmac1 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -580,8 +585,9 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
- dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+ <&dmac1 0xc1>, <&dmac1 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -591,8 +597,9 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
- dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+ <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -604,8 +611,9 @@
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
clock-names = "fck";
- dmas = <&dmac0 0x21>, <&dmac0 0x22>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -617,8 +625,9 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
clock-names = "fck";
- dmas = <&dmac0 0x25>, <&dmac0 0x26>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -630,8 +639,9 @@
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
clock-names = "fck";
- dmas = <&dmac0 0x27>, <&dmac0 0x28>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -643,8 +653,9 @@
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
clock-names = "fck";
- dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -656,8 +667,9 @@
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
clock-names = "fck";
- dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -669,8 +681,9 @@
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
clock-names = "fck";
- dmas = <&dmac0 0x23>, <&dmac0 0x24>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -682,8 +695,9 @@
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
clock-names = "fck";
- dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -695,8 +709,9 @@
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
clock-names = "fck";
- dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -708,8 +723,9 @@
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
clock-names = "fck";
- dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -722,8 +738,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -736,8 +753,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -750,8 +768,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -764,8 +783,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -778,8 +798,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -792,8 +813,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -806,8 +828,9 @@
clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -820,8 +843,9 @@
clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -834,8 +858,9 @@
clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1478,8 +1503,9 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
@@ -1492,8 +1518,9 @@
reg = <0 0xe6e20000 0 0x0064>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
- dmas = <&dmac0 0x51>, <&dmac0 0x52>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+ <&dmac1 0x51>, <&dmac1 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1505,8 +1532,9 @@
reg = <0 0xe6e10000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
- dmas = <&dmac0 0x55>, <&dmac0 0x56>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+ <&dmac1 0x55>, <&dmac1 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1518,8 +1546,9 @@
reg = <0 0xe6e00000 0 0x0064>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
- dmas = <&dmac0 0x41>, <&dmac0 0x42>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+ <&dmac1 0x41>, <&dmac1 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 07/30] ARM: dts: r8a7793: Reference both DMA controllers
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (5 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 06/30] ARM: dts: r8a7791: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 08/30] ARM: dts: r8a7794: " Simon Horman
` (23 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can choose which one to
use.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 130 ++++++++++++++++++++++++-----------------
1 file changed, 78 insertions(+), 52 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 76c8435f283c..5f50e9b5d804 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -473,8 +473,9 @@
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
- dmas = <&dmac0 0x77>, <&dmac0 0x78>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -486,8 +487,9 @@
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -499,8 +501,9 @@
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
- dmas = <&dmac0 0x65>, <&dmac0 0x66>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -515,8 +518,9 @@
reg = <0 0xee100000 0 0x328>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_SDHI0>;
- dmas = <&dmac0 0xcd>, <&dmac0 0xce>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+ <&dmac1 0xcd>, <&dmac1 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -526,8 +530,9 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_SDHI1>;
- dmas = <&dmac0 0xc1>, <&dmac0 0xc2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+ <&dmac1 0xc1>, <&dmac1 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -537,8 +542,9 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_SDHI2>;
- dmas = <&dmac0 0xd3>, <&dmac0 0xd4>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+ <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -548,8 +554,9 @@
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_MMCIF0>;
- dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
@@ -563,8 +570,9 @@
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
clock-names = "fck";
- dmas = <&dmac0 0x21>, <&dmac0 0x22>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -576,8 +584,9 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
clock-names = "fck";
- dmas = <&dmac0 0x25>, <&dmac0 0x26>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -589,8 +598,9 @@
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
clock-names = "fck";
- dmas = <&dmac0 0x27>, <&dmac0 0x28>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -602,8 +612,9 @@
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
clock-names = "fck";
- dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -615,8 +626,9 @@
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
clock-names = "fck";
- dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -628,8 +640,9 @@
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
clock-names = "fck";
- dmas = <&dmac0 0x23>, <&dmac0 0x24>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -641,8 +654,9 @@
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
clock-names = "fck";
- dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -654,8 +668,9 @@
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
clock-names = "fck";
- dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -667,8 +682,9 @@
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
clock-names = "fck";
- dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -681,8 +697,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -695,8 +712,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -709,8 +727,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -723,8 +742,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -737,8 +757,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -751,8 +772,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -765,8 +787,9 @@
clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -779,8 +802,9 @@
clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -793,8 +817,9 @@
clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -816,8 +841,9 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 08/30] ARM: dts: r8a7794: Reference both DMA controllers
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (6 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 07/30] ARM: dts: r8a7793: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 09/30] ARM: dts: r8a7794: Remove nonexistent thermal sensor clock Simon Horman
` (22 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can choose which one to
use.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 119 ++++++++++++++++++++++++++---------------
1 file changed, 75 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index f334a3a715f2..ad1df8317575 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -302,8 +302,9 @@
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
clock-names = "fck";
- dmas = <&dmac0 0x21>, <&dmac0 0x22>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -315,8 +316,9 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
clock-names = "fck";
- dmas = <&dmac0 0x25>, <&dmac0 0x26>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -328,8 +330,9 @@
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
clock-names = "fck";
- dmas = <&dmac0 0x27>, <&dmac0 0x28>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -341,8 +344,9 @@
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
clock-names = "fck";
- dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -354,8 +358,9 @@
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
clock-names = "fck";
- dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -367,8 +372,9 @@
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
clock-names = "fck";
- dmas = <&dmac0 0x23>, <&dmac0 0x24>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -380,8 +386,9 @@
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
clock-names = "fck";
- dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -393,8 +400,9 @@
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
clock-names = "fck";
- dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -406,8 +414,9 @@
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
clock-names = "fck";
- dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -420,8 +429,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -434,8 +444,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -448,8 +459,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -462,8 +474,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -476,8 +489,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -490,8 +504,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -504,8 +519,9 @@
clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -518,8 +534,9 @@
clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -532,8 +549,9 @@
clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -640,8 +658,9 @@
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_IIC0>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
@@ -653,8 +672,9 @@
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_IIC1>;
- dmas = <&dmac0 0x65>, <&dmac0 0x66>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
@@ -666,8 +686,9 @@
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
- dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
@@ -678,6 +699,9 @@
reg = <0 0xee100000 0 0x200>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+ <&dmac1 0xcd>, <&dmac1 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -687,6 +711,9 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
+ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+ <&dmac1 0xc1>, <&dmac1 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -696,6 +723,9 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+ <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -705,8 +735,9 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 09/30] ARM: dts: r8a7794: Remove nonexistent thermal sensor clock
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (7 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 08/30] ARM: dts: r8a7794: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 10/30] ARM: dts: emev2: Fix W=1 dtc warnings Simon Horman
` (21 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
According to the latest information, there is no thermal IP block
present on the r8a7794 SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
include/dt-bindings/clock/r8a7794-clock.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index 4d3ecd626c1f..a3491ba2f6ec 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -67,7 +67,6 @@
#define R8A7794_CLK_IRQC 7
/* MSTP5 */
-#define R8A7794_CLK_THERMAL 22
#define R8A7794_CLK_PWM 23
/* MSTP7 */
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 10/30] ARM: dts: emev2: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (8 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 09/30] ARM: dts: r8a7794: Remove nonexistent thermal sensor clock Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 11/30] ARM: dts: r8a73a4: " Simon Horman
` (20 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /clocks at e0110000/iic0_sclkdiv has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /clocks at e0110000/iic0_sclk has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /clocks at e0110000/iic1_sclkdiv has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /clocks at e0110000/iic1_sclk has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /clocks at e0110000/usia_u0_sclkdiv has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /clocks at e0110000/usib_u1_sclkdiv has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /clocks at e0110000/usib_u2_sclkdiv has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /clocks at e0110000/usib_u3_sclkdiv has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /clocks at e0110000/usia_u0_sclk has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /clocks at e0110000/usib_u1_sclk has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /clocks at e0110000/usib_u2_sclk has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /clocks at e0110000/usib_u3_sclk has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /clocks at e0110000/sti_sclk has a reg or ranges property, but no unit name
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/emev2.dtsi | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index bcce6f50c93d..cd119400f440 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -69,25 +69,25 @@
clock-frequency = <32768>;
#clock-cells = <0>;
};
- iic0_sclkdiv: iic0_sclkdiv {
+ iic0_sclkdiv: iic0_sclkdiv at 624,0 {
compatible = "renesas,emev2-smu-clkdiv";
reg = <0x624 0>;
clocks = <&pll3_fo>;
#clock-cells = <0>;
};
- iic0_sclk: iic0_sclk {
+ iic0_sclk: iic0_sclk at 48c,1 {
compatible = "renesas,emev2-smu-gclk";
reg = <0x48c 1>;
clocks = <&iic0_sclkdiv>;
#clock-cells = <0>;
};
- iic1_sclkdiv: iic1_sclkdiv {
+ iic1_sclkdiv: iic1_sclkdiv at 624,16 {
compatible = "renesas,emev2-smu-clkdiv";
reg = <0x624 16>;
clocks = <&pll3_fo>;
#clock-cells = <0>;
};
- iic1_sclk: iic1_sclk {
+ iic1_sclk: iic1_sclk at 490,1 {
compatible = "renesas,emev2-smu-gclk";
reg = <0x490 1>;
clocks = <&iic1_sclkdiv>;
@@ -100,55 +100,55 @@
clock-mult = <7000>;
#clock-cells = <0>;
};
- usia_u0_sclkdiv: usia_u0_sclkdiv {
+ usia_u0_sclkdiv: usia_u0_sclkdiv at 610,0 {
compatible = "renesas,emev2-smu-clkdiv";
reg = <0x610 0>;
clocks = <&pll3_fo>;
#clock-cells = <0>;
};
- usib_u1_sclkdiv: usib_u1_sclkdiv {
+ usib_u1_sclkdiv: usib_u1_sclkdiv at 65c,0 {
compatible = "renesas,emev2-smu-clkdiv";
reg = <0x65c 0>;
clocks = <&pll3_fo>;
#clock-cells = <0>;
};
- usib_u2_sclkdiv: usib_u2_sclkdiv {
+ usib_u2_sclkdiv: usib_u2_sclkdiv at 65c,16 {
compatible = "renesas,emev2-smu-clkdiv";
reg = <0x65c 16>;
clocks = <&pll3_fo>;
#clock-cells = <0>;
};
- usib_u3_sclkdiv: usib_u3_sclkdiv {
+ usib_u3_sclkdiv: usib_u3_sclkdiv at 660,0 {
compatible = "renesas,emev2-smu-clkdiv";
reg = <0x660 0>;
clocks = <&pll3_fo>;
#clock-cells = <0>;
};
- usia_u0_sclk: usia_u0_sclk {
+ usia_u0_sclk: usia_u0_sclk at 4a0,1 {
compatible = "renesas,emev2-smu-gclk";
reg = <0x4a0 1>;
clocks = <&usia_u0_sclkdiv>;
#clock-cells = <0>;
};
- usib_u1_sclk: usib_u1_sclk {
+ usib_u1_sclk: usib_u1_sclk at 4b8,1 {
compatible = "renesas,emev2-smu-gclk";
reg = <0x4b8 1>;
clocks = <&usib_u1_sclkdiv>;
#clock-cells = <0>;
};
- usib_u2_sclk: usib_u2_sclk {
+ usib_u2_sclk: usib_u2_sclk at 4bc,1 {
compatible = "renesas,emev2-smu-gclk";
reg = <0x4bc 1>;
clocks = <&usib_u2_sclkdiv>;
#clock-cells = <0>;
};
- usib_u3_sclk: usib_u3_sclk {
+ usib_u3_sclk: usib_u3_sclk at 4c0,1 {
compatible = "renesas,emev2-smu-gclk";
reg = <0x4c0 1>;
clocks = <&usib_u3_sclkdiv>;
#clock-cells = <0>;
};
- sti_sclk: sti_sclk {
+ sti_sclk: sti_sclk at 528,1 {
compatible = "renesas,emev2-smu-gclk";
reg = <0x528 1>;
clocks = <&c32ki>;
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 11/30] ARM: dts: r8a73a4: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (9 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 10/30] ARM: dts: emev2: Fix W=1 dtc warnings Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 12/30] ARM: dts: r8a7740: " Simon Horman
` (19 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /cache-controller at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /cache-controller at 1 has a unit name, but no reg property
Move the cache-controller nodes under the cpus node, and make their
unit names and reg properties match the MPIDR values.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4.dtsi | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 6954912a3753..ca8672778fe0 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -31,6 +31,24 @@
power-domains = <&pd_a2sl>;
next-level-cache = <&L2_CA15>;
};
+
+ L2_CA15: cache-controller at 0 {
+ compatible = "cache";
+ reg = <0>;
+ clocks = <&cpg_clocks R8A73A4_CLK_Z>;
+ power-domains = <&pd_a3sm>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ L2_CA7: cache-controller at 100 {
+ compatible = "cache";
+ reg = <0x100>;
+ clocks = <&cpg_clocks R8A73A4_CLK_Z2>;
+ power-domains = <&pd_a3km>;
+ cache-unified;
+ cache-level = <2>;
+ };
};
ptm {
@@ -46,22 +64,6 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
- L2_CA15: cache-controller at 0 {
- compatible = "cache";
- clocks = <&cpg_clocks R8A73A4_CLK_Z>;
- power-domains = <&pd_a3sm>;
- cache-unified;
- cache-level = <2>;
- };
-
- L2_CA7: cache-controller at 1 {
- compatible = "cache";
- clocks = <&cpg_clocks R8A73A4_CLK_Z2>;
- power-domains = <&pd_a3km>;
- cache-unified;
- cache-level = <2>;
- };
-
dbsc1: memory-controller at e6790000 {
compatible = "renesas,dbsc-r8a73a4";
reg = <0 0xe6790000 0 0x10000>;
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 12/30] ARM: dts: r8a7740: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (10 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 11/30] ARM: dts: r8a73a4: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 13/30] ARM: dts: r8a7778: " Simon Horman
` (18 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /cache-controller has a reg or ranges property, but no unit name
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 39b2f88ad151..159e04eb1b9e 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -39,7 +39,7 @@
<0xc2000000 0x1000>;
};
- L2: cache-controller {
+ L2: cache-controller at f0100000 {
compatible = "arm,pl310-cache";
reg = <0xf0100000 0x1000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 13/30] ARM: dts: r8a7778: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (11 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 12/30] ARM: dts: r8a7740: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 14/30] ARM: dts: r8a7790: " Simon Horman
` (17 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /sound at ffd90000/rcar_sound,src/src at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ffd90000/rcar_sound,src/src at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ffd90000/rcar_sound,src/src at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ffd90000/rcar_sound,src/src at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ffd90000/rcar_sound,src/src at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ffd90000/rcar_sound,src/src at 8 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ffd90000/rcar_sound,src/src at 9 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ffd90000/rcar_sound,ssi/ssi at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ffd90000/rcar_sound,ssi/ssi at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ffd90000/rcar_sound,ssi/ssi at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ffd90000/rcar_sound,ssi/ssi at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ffd90000/rcar_sound,ssi/ssi at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ffd90000/rcar_sound,ssi/ssi at 8 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ffd90000/rcar_sound,ssi/ssi at 9 has a unit name, but no reg property
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778.dtsi | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index fe787b4751d2..e571d66ea0fe 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -276,23 +276,23 @@
status = "disabled";
rcar_sound,src {
- src3: src at 3 { };
- src4: src at 4 { };
- src5: src at 5 { };
- src6: src at 6 { };
- src7: src at 7 { };
- src8: src at 8 { };
- src9: src at 9 { };
+ src3: src-3 { };
+ src4: src-4 { };
+ src5: src-5 { };
+ src6: src-6 { };
+ src7: src-7 { };
+ src8: src-8 { };
+ src9: src-9 { };
};
rcar_sound,ssi {
- ssi3: ssi at 3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
- ssi4: ssi at 4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
- ssi5: ssi at 5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi6: ssi at 6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi7: ssi at 7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi8: ssi at 8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi9: ssi at 9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi3: ssi-3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi4: ssi-4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi5: ssi-5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi6: ssi-6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi7: ssi-7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi8: ssi-8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi9: ssi-9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
};
};
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 14/30] ARM: dts: r8a7790: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (12 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 13/30] ARM: dts: r8a7778: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 7:13 ` Kuninori Morimoto
2016-06-08 0:59 ` [PATCH 15/30] ARM: dts: r8a7791: " Simon Horman
` (16 subsequent siblings)
30 siblings, 1 reply; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /cache-controller at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /cache-controller at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,dvc/dvc at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,dvc/dvc at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,mix/mix at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,mix/mix at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 8 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 9 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 8 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 9 has a unit name, but no reg property
Move the cache-controller nodes under the cpus node, and make their unit
names and reg properties match the MPIDR values.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 94 +++++++++++++++++++++---------------------
1 file changed, 48 insertions(+), 46 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 97f4c1dc3ae8..9997e7dfabe2 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -127,6 +127,22 @@
power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
next-level-cache = <&L2_CA7>;
};
+
+ L2_CA15: cache-controller at 0 {
+ compatible = "cache";
+ reg = <0>;
+ power-domains = <&sysc R8A7790_PD_CA15_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ L2_CA7: cache-controller at 100 {
+ compatible = "cache";
+ reg = <0x100>;
+ power-domains = <&sysc R8A7790_PD_CA7_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
};
thermal-zones {
@@ -148,20 +164,6 @@
};
};
- L2_CA15: cache-controller at 0 {
- compatible = "cache";
- power-domains = <&sysc R8A7790_PD_CA15_SCU>;
- cache-unified;
- cache-level = <2>;
- };
-
- L2_CA7: cache-controller at 1 {
- compatible = "cache";
- power-domains = <&sysc R8A7790_PD_CA7_SCU>;
- cache-unified;
- cache-level = <2>;
- };
-
gic: interrupt-controller at f1001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -1728,79 +1730,79 @@
status = "disabled";
rcar_sound,dvc {
- dvc0: dvc at 0 {
+ dvc0: dvc-0 {
dmas = <&audma0 0xbc>;
dma-names = "tx";
};
- dvc1: dvc at 1 {
+ dvc1: dvc-1 {
dmas = <&audma0 0xbe>;
dma-names = "tx";
};
};
rcar_sound,mix {
- mix0: mix at 0 { };
- mix1: mix at 1 { };
+ mix0: mix-0 { };
+ mix1: mix-1 { };
};
rcar_sound,ctu {
- ctu00: ctu at 0 { };
- ctu01: ctu at 1 { };
- ctu02: ctu at 2 { };
- ctu03: ctu at 3 { };
- ctu10: ctu at 4 { };
- ctu11: ctu at 5 { };
- ctu12: ctu at 6 { };
- ctu13: ctu at 7 { };
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
};
rcar_sound,src {
- src0: src at 0 {
+ src0: src-0 {
interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x85>, <&audma1 0x9a>;
dma-names = "rx", "tx";
};
- src1: src at 1 {
+ src1: src-1 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x87>, <&audma1 0x9c>;
dma-names = "rx", "tx";
};
- src2: src at 2 {
+ src2: src-2 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x89>, <&audma1 0x9e>;
dma-names = "rx", "tx";
};
- src3: src at 3 {
+ src3: src-3 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8b>, <&audma1 0xa0>;
dma-names = "rx", "tx";
};
- src4: src at 4 {
+ src4: src-4 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8d>, <&audma1 0xb0>;
dma-names = "rx", "tx";
};
- src5: src at 5 {
+ src5: src-5 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8f>, <&audma1 0xb2>;
dma-names = "rx", "tx";
};
- src6: src at 6 {
+ src6: src-6 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x91>, <&audma1 0xb4>;
dma-names = "rx", "tx";
};
- src7: src at 7 {
+ src7: src-7 {
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x93>, <&audma1 0xb6>;
dma-names = "rx", "tx";
};
- src8: src at 8 {
+ src8: src-8 {
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x95>, <&audma1 0xb8>;
dma-names = "rx", "tx";
};
- src9: src at 9 {
+ src9: src-9 {
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x97>, <&audma1 0xba>;
dma-names = "rx", "tx";
@@ -1808,52 +1810,52 @@
};
rcar_sound,ssi {
- ssi0: ssi at 0 {
+ ssi0: ssi-0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi1: ssi at 1 {
+ ssi1: ssi-1 {
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi2: ssi at 2 {
+ ssi2: ssi-2 {
interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi3: ssi at 3 {
+ ssi3: ssi-3 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi4: ssi at 4 {
+ ssi4: ssi-4 {
interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi5: ssi at 5 {
+ ssi5: ssi-5 {
interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi6: ssi at 6 {
+ ssi6: ssi-6 {
interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi7: ssi at 7 {
+ ssi7: ssi-7 {
interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi8: ssi at 8 {
+ ssi8: ssi-8 {
interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi9: ssi at 9 {
+ ssi9: ssi-9 {
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
dma-names = "rx", "tx", "rxu", "txu";
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 14/30] ARM: dts: r8a7790: Fix W=1 dtc warnings
2016-06-08 0:59 ` [PATCH 14/30] ARM: dts: r8a7790: " Simon Horman
@ 2016-06-08 7:13 ` Kuninori Morimoto
0 siblings, 0 replies; 33+ messages in thread
From: Kuninori Morimoto @ 2016-06-08 7:13 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon
> From: Geert Uytterhoeven <geert+renesas@glider.be>
>
> Warning (unit_address_vs_reg): Node /cache-controller at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /cache-controller at 1 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,dvc/dvc at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,dvc/dvc at 1 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,mix/mix at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,mix/mix at 1 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 1 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 2 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 3 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 4 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 5 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 6 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 7 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 1 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 2 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 3 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 4 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 5 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 6 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 7 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 8 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 9 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 1 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 2 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 3 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 4 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 5 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 6 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 7 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 8 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 9 has a unit name, but no reg property
>
> Move the cache-controller nodes under the cpus node, and make their unit
> names and reg properties match the MPIDR values.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
For sound portion.
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
^ permalink raw reply [flat|nested] 33+ messages in thread
* [PATCH 15/30] ARM: dts: r8a7791: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (13 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 14/30] ARM: dts: r8a7790: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 16/30] ARM: dts: r8a7793: " Simon Horman
` (15 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /cache-controller at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,dvc/dvc at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,dvc/dvc at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,mix/mix at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,mix/mix at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 8 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 9 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 8 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 9 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /cache-controller at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,dvc/dvc at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,dvc/dvc at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,mix/mix at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,mix/mix at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 8 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 9 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 8 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 9 has a unit name, but no reg property
Move the cache-controller node under the cpus node, and make its unit
name and reg property match the MPIDR values.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 79 +++++++++++++++++++++---------------------
1 file changed, 40 insertions(+), 39 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 2f924146d381..1985bd0dc32c 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -72,6 +72,14 @@
power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
};
+
+ L2_CA15: cache-controller at 0 {
+ compatible = "cache";
+ reg = <0>;
+ power-domains = <&sysc R8A7791_PD_CA15_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
};
thermal-zones {
@@ -93,13 +101,6 @@
};
};
- L2_CA15: cache-controller at 0 {
- compatible = "cache";
- power-domains = <&sysc R8A7791_PD_CA15_SCU>;
- cache-unified;
- cache-level = <2>;
- };
-
gic: interrupt-controller at f1001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -1766,79 +1767,79 @@
status = "disabled";
rcar_sound,dvc {
- dvc0: dvc at 0 {
+ dvc0: dvc-0 {
dmas = <&audma0 0xbc>;
dma-names = "tx";
};
- dvc1: dvc at 1 {
+ dvc1: dvc-1 {
dmas = <&audma0 0xbe>;
dma-names = "tx";
};
};
rcar_sound,mix {
- mix0: mix at 0 { };
- mix1: mix at 1 { };
+ mix0: mix-0 { };
+ mix1: mix-1 { };
};
rcar_sound,ctu {
- ctu00: ctu at 0 { };
- ctu01: ctu at 1 { };
- ctu02: ctu at 2 { };
- ctu03: ctu at 3 { };
- ctu10: ctu at 4 { };
- ctu11: ctu at 5 { };
- ctu12: ctu at 6 { };
- ctu13: ctu at 7 { };
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
};
rcar_sound,src {
- src0: src at 0 {
+ src0: src-0 {
interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x85>, <&audma1 0x9a>;
dma-names = "rx", "tx";
};
- src1: src at 1 {
+ src1: src-1 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x87>, <&audma1 0x9c>;
dma-names = "rx", "tx";
};
- src2: src at 2 {
+ src2: src-2 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x89>, <&audma1 0x9e>;
dma-names = "rx", "tx";
};
- src3: src at 3 {
+ src3: src-3 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8b>, <&audma1 0xa0>;
dma-names = "rx", "tx";
};
- src4: src at 4 {
+ src4: src-4 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8d>, <&audma1 0xb0>;
dma-names = "rx", "tx";
};
- src5: src at 5 {
+ src5: src-5 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8f>, <&audma1 0xb2>;
dma-names = "rx", "tx";
};
- src6: src at 6 {
+ src6: src-6 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x91>, <&audma1 0xb4>;
dma-names = "rx", "tx";
};
- src7: src at 7 {
+ src7: src-7 {
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x93>, <&audma1 0xb6>;
dma-names = "rx", "tx";
};
- src8: src at 8 {
+ src8: src-8 {
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x95>, <&audma1 0xb8>;
dma-names = "rx", "tx";
};
- src9: src at 9 {
+ src9: src-9 {
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x97>, <&audma1 0xba>;
dma-names = "rx", "tx";
@@ -1846,52 +1847,52 @@
};
rcar_sound,ssi {
- ssi0: ssi at 0 {
+ ssi0: ssi-0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi1: ssi at 1 {
+ ssi1: ssi-1 {
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi2: ssi at 2 {
+ ssi2: ssi-2 {
interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi3: ssi at 3 {
+ ssi3: ssi-3 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi4: ssi at 4 {
+ ssi4: ssi-4 {
interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi5: ssi at 5 {
+ ssi5: ssi-5 {
interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi6: ssi at 6 {
+ ssi6: ssi-6 {
interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi7: ssi at 7 {
+ ssi7: ssi-7 {
interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi8: ssi at 8 {
+ ssi8: ssi-8 {
interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi9: ssi at 9 {
+ ssi9: ssi-9 {
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
dma-names = "rx", "tx", "rxu", "txu";
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 16/30] ARM: dts: r8a7793: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (14 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 15/30] ARM: dts: r8a7791: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 17/30] ARM: dts: r8a7794: " Simon Horman
` (14 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /cache-controller at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,dvc/dvc at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,dvc/dvc at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 8 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 9 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 8 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 9 has a unit name, but no reg property
Move the cache-controller node under the cpus node, and make its unit
name and reg property match the MPIDR values.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 59 +++++++++++++++++++++---------------------
1 file changed, 30 insertions(+), 29 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 5f50e9b5d804..9b55c1c6ee31 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -55,6 +55,14 @@
< 375000 1000000>;
next-level-cache = <&L2_CA15>;
};
+
+ L2_CA15: cache-controller at 0 {
+ compatible = "cache";
+ reg = <0>;
+ power-domains = <&sysc R8A7793_PD_CA15_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
};
thermal-zones {
@@ -76,13 +84,6 @@
};
};
- L2_CA15: cache-controller at 0 {
- compatible = "cache";
- power-domains = <&sysc R8A7793_PD_CA15_SCU>;
- cache-unified;
- cache-level = <2>;
- };
-
gic: interrupt-controller at f1001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -1369,63 +1370,63 @@
status = "disabled";
rcar_sound,dvc {
- dvc0: dvc at 0 {
+ dvc0: dvc-0 {
dmas = <&audma0 0xbc>;
dma-names = "tx";
};
- dvc1: dvc at 1 {
+ dvc1: dvc-1 {
dmas = <&audma0 0xbe>;
dma-names = "tx";
};
};
rcar_sound,src {
- src0: src at 0 {
+ src0: src-0 {
interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x85>, <&audma1 0x9a>;
dma-names = "rx", "tx";
};
- src1: src at 1 {
+ src1: src-1 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x87>, <&audma1 0x9c>;
dma-names = "rx", "tx";
};
- src2: src at 2 {
+ src2: src-2 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x89>, <&audma1 0x9e>;
dma-names = "rx", "tx";
};
- src3: src at 3 {
+ src3: src-3 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8b>, <&audma1 0xa0>;
dma-names = "rx", "tx";
};
- src4: src at 4 {
+ src4: src-4 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8d>, <&audma1 0xb0>;
dma-names = "rx", "tx";
};
- src5: src at 5 {
+ src5: src-5 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8f>, <&audma1 0xb2>;
dma-names = "rx", "tx";
};
- src6: src at 6 {
+ src6: src-6 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x91>, <&audma1 0xb4>;
dma-names = "rx", "tx";
};
- src7: src at 7 {
+ src7: src-7 {
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x93>, <&audma1 0xb6>;
dma-names = "rx", "tx";
};
- src8: src at 8 {
+ src8: src-8 {
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x95>, <&audma1 0xb8>;
dma-names = "rx", "tx";
};
- src9: src at 9 {
+ src9: src-9 {
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x97>, <&audma1 0xba>;
dma-names = "rx", "tx";
@@ -1433,52 +1434,52 @@
};
rcar_sound,ssi {
- ssi0: ssi at 0 {
+ ssi0: ssi-0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi1: ssi at 1 {
+ ssi1: ssi-1 {
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi2: ssi at 2 {
+ ssi2: ssi-2 {
interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi3: ssi at 3 {
+ ssi3: ssi-3 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi4: ssi at 4 {
+ ssi4: ssi-4 {
interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi5: ssi at 5 {
+ ssi5: ssi-5 {
interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi6: ssi at 6 {
+ ssi6: ssi-6 {
interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi7: ssi at 7 {
+ ssi7: ssi-7 {
interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi8: ssi at 8 {
+ ssi8: ssi-8 {
interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi9: ssi at 9 {
+ ssi9: ssi-9 {
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
dma-names = "rx", "tx", "rxu", "txu";
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 17/30] ARM: dts: r8a7794: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (15 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 16/30] ARM: dts: r8a7793: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 18/30] ARM: dts: sh73a0: " Simon Horman
` (13 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /cache-controller at 1 has a unit name, but no reg property
Move the cache-controller node under the cpus node, and make its unit
name and reg property match the MPIDR value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index ad1df8317575..685f986cf962 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -55,13 +55,14 @@
power-domains = <&sysc R8A7794_PD_CA7_CPU1>;
next-level-cache = <&L2_CA7>;
};
- };
- L2_CA7: cache-controller at 1 {
- compatible = "cache";
- power-domains = <&sysc R8A7794_PD_CA7_SCU>;
- cache-unified;
- cache-level = <2>;
+ L2_CA7: cache-controller at 0 {
+ compatible = "cache";
+ reg = <0>;
+ power-domains = <&sysc R8A7794_PD_CA7_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
};
gic: interrupt-controller at f1001000 {
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 18/30] ARM: dts: sh73a0: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (16 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 17/30] ARM: dts: r8a7794: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 19/30] ARM: dts: ape6evm: " Simon Horman
` (12 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /cache-controller has a reg or ranges property, but no unit name
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index c4f434cdec60..032fe2f14b16 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -55,7 +55,7 @@
<0xf0000100 0x100>;
};
- L2: cache-controller {
+ L2: cache-controller at f0100000 {
compatible = "arm,pl310-cache";
reg = <0xf0100000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 19/30] ARM: dts: ape6evm: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (17 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 18/30] ARM: dts: sh73a0: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 20/30] ARM: dts: armadillo800eva: " Simon Horman
` (11 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /regulator at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 3 has a unit name, but no reg property
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index 93ace33e3e36..740e5d23f7c7 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -36,7 +36,7 @@
reg = <2 0x00000000 0 0x40000000>;
};
- vcc_mmc0: regulator at 0 {
+ vcc_mmc0: regulator-mmc0 {
compatible = "regulator-fixed";
regulator-name = "MMC0 Vcc";
regulator-min-microvolt = <2800000>;
@@ -44,7 +44,7 @@
regulator-always-on;
};
- vcc_sdhi0: regulator at 1 {
+ vcc_sdhi0: regulator-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
@@ -56,7 +56,7 @@
};
/* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */
- ape6evm_fixed_1v8: regulator at 2 {
+ ape6evm_fixed_1v8: regulator-1v8 {
compatible = "regulator-fixed";
regulator-name = "1V8";
regulator-min-microvolt = <1800000>;
@@ -64,7 +64,7 @@
regulator-always-on;
};
- ape6evm_fixed_3v3: regulator at 3 {
+ ape6evm_fixed_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 20/30] ARM: dts: armadillo800eva: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (18 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 19/30] ARM: dts: ape6evm: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 21/30] ARM: dts: bockw: " Simon Horman
` (10 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /regulator at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c at 2 has a unit name, but no reg property
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 2c82dab2b6f4..162049516685 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -28,12 +28,12 @@
stdout-path = &scifa1;
};
- memory {
+ memory at 40000000 {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
- reg_3p3v: regulator at 0 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
@@ -42,7 +42,7 @@
regulator-boot-on;
};
- vcc_sdhi0: regulator at 1 {
+ vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
@@ -53,7 +53,7 @@
enable-active-high;
};
- vccq_sdhi0: regulator at 2 {
+ vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
@@ -69,7 +69,7 @@
enable-active-high;
};
- reg_5p0v: regulator at 3 {
+ reg_5p0v: regulator-5p0v {
compatible = "regulator-fixed";
regulator-name = "fixed-5.0V";
regulator-min-microvolt = <5000000>;
@@ -127,7 +127,7 @@
};
};
- i2c2: i2c at 2 {
+ i2c2: i2c-2 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "i2c-gpio";
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 21/30] ARM: dts: bockw: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (19 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 20/30] ARM: dts: armadillo800eva: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 22/30] ARM: dts: genmai: " Simon Horman
` (9 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /fixedregulator at 0 has a unit name, but no reg property
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778-bockw.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index 982a237ea622..0a0bd3b6bb40 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -32,12 +32,12 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory at 60000000 {
device_type = "memory";
reg = <0x60000000 0x10000000>;
};
- fixedregulator3v3: fixedregulator at 0 {
+ fixedregulator3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 22/30] ARM: dts: genmai: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (20 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 21/30] ARM: dts: bockw: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 23/30] ARM: dts: gose: " Simon Horman
` (8 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r7s72100-genmai.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index a9da7a89fc4b..05ba9953b4d8 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -25,7 +25,7 @@
stdout-path = &scif2;
};
- memory {
+ memory at 8000000 {
device_type = "memory";
reg = <0x08000000 0x08000000>;
};
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 23/30] ARM: dts: gose: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (21 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 22/30] ARM: dts: genmai: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 24/30] ARM: dts: koelsch: " Simon Horman
` (7 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /regulator at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 5 has a unit name, but no reg property
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 0ebc3ee34923..f748360ee857 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -158,7 +158,7 @@
};
};
- vcc_sdhi0: regulator at 0 {
+ vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
@@ -169,7 +169,7 @@
enable-active-high;
};
- vccq_sdhi0: regulator at 1 {
+ vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
@@ -182,7 +182,7 @@
1800000 0>;
};
- vcc_sdhi1: regulator at 2 {
+ vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
regulator-name = "SDHI1 Vcc";
@@ -193,7 +193,7 @@
enable-active-high;
};
- vccq_sdhi1: regulator at 3 {
+ vccq_sdhi1: regulator-vccq-sdhi1 {
compatible = "regulator-gpio";
regulator-name = "SDHI1 VccQ";
@@ -206,7 +206,7 @@
1800000 0>;
};
- vcc_sdhi2: regulator at 4 {
+ vcc_sdhi2: regulator-vcc-sdhi2 {
compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
@@ -217,7 +217,7 @@
enable-active-high;
};
- vccq_sdhi2: regulator at 5 {
+ vccq_sdhi2: regulator-vccq-sdhi2 {
compatible = "regulator-gpio";
regulator-name = "SDHI2 VccQ";
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 24/30] ARM: dts: koelsch: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (22 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 23/30] ARM: dts: gose: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 25/30] ARM: dts: kzm9d: " Simon Horman
` (6 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /regulator at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 5 has a unit name, but no reg property
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index da59c2844b8a..20fbc8c36a78 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -170,7 +170,7 @@
};
};
- vcc_sdhi0: regulator at 0 {
+ vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
@@ -181,7 +181,7 @@
enable-active-high;
};
- vccq_sdhi0: regulator at 1 {
+ vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
@@ -194,7 +194,7 @@
1800000 0>;
};
- vcc_sdhi1: regulator at 2 {
+ vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
regulator-name = "SDHI1 Vcc";
@@ -205,7 +205,7 @@
enable-active-high;
};
- vccq_sdhi1: regulator at 3 {
+ vccq_sdhi1: regulator-vccq-sdhi1 {
compatible = "regulator-gpio";
regulator-name = "SDHI1 VccQ";
@@ -218,7 +218,7 @@
1800000 0>;
};
- vcc_sdhi2: regulator at 4 {
+ vcc_sdhi2: regulator-vcc-sdhi2 {
compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
@@ -229,7 +229,7 @@
enable-active-high;
};
- vccq_sdhi2: regulator at 5 {
+ vccq_sdhi2: regulator-vccq-sdhi2 {
compatible = "regulator-gpio";
regulator-name = "SDHI2 VccQ";
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 25/30] ARM: dts: kzm9d: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (23 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 24/30] ARM: dts: koelsch: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 26/30] ARM: dts: kzm9g: " Simon Horman
` (5 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /pfc at e0140200/serial at e1030000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpio_keys/button at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpio_keys/button at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpio_keys/button at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpio_keys/button at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 1 has a unit name, but no reg property
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/emev2-kzm9d.dts | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index a35b851e1cd7..9eb86f8f32c5 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -18,7 +18,7 @@
model = "EMEV2 KZM9D Board";
compatible = "renesas,kzm9d", "renesas,emev2";
- memory {
+ memory at 40000000 {
device_type = "memory";
reg = <0x40000000 0x8000000>;
};
@@ -33,28 +33,28 @@
#address-cells = <1>;
#size-cells = <0>;
- button at 1 {
+ one {
debounce_interval = <50>;
wakeup-source;
label = "DSW2-1";
linux,code = <KEY_1>;
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
- button at 2 {
+ two {
debounce_interval = <50>;
wakeup-source;
label = "DSW2-2";
linux,code = <KEY_2>;
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
- button at 3 {
+ three {
debounce_interval = <50>;
wakeup-source;
label = "DSW2-3";
linux,code = <KEY_3>;
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
- button at 4 {
+ four {
debounce_interval = <50>;
wakeup-source;
label = "DSW2-4";
@@ -63,7 +63,7 @@
};
};
- reg_1p8v: regulator at 0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
@@ -72,7 +72,7 @@
regulator-boot-on;
};
- reg_3p3v: regulator at 1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
@@ -104,7 +104,7 @@
};
&pfc {
- uart1_pins: serial at e1030000 {
+ uart1_pins: uart1 {
groups = "uart1_ctrl", "uart1_data";
function = "uart1";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 26/30] ARM: dts: kzm9g: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (24 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 25/30] ARM: dts: kzm9d: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 27/30] ARM: dts: lager: " Simon Horman
` (4 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /regulator at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 3 has a unit name, but no reg property
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0-kzm9g.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 9881adf1734e..36567cbf2e1c 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -43,12 +43,12 @@
stdout-path = &scifa4;
};
- memory {
+ memory at 40000000 {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
- reg_1p8v: regulator at 0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
@@ -57,7 +57,7 @@
regulator-boot-on;
};
- reg_3p3v: regulator at 1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
@@ -66,7 +66,7 @@
regulator-boot-on;
};
- vmmc_sdhi0: regulator at 2 {
+ vmmc_sdhi0: regulator-vmmc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
@@ -75,7 +75,7 @@
enable-active-high;
};
- vmmc_sdhi2: regulator at 3 {
+ vmmc_sdhi2: regulator-vmmc-sdhi2 {
compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
regulator-min-microvolt = <3300000>;
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 27/30] ARM: dts: lager: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (25 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 26/30] ARM: dts: kzm9g: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 28/30] ARM: dts: marzen: " Simon Horman
` (3 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /keyboard/button at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /keyboard/button at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /keyboard/button at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /keyboard/button at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixedregulator at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c at 8 has a unit name, but no reg property
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790-lager.dts | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 749ba02b6a53..9d20ace33b01 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -76,28 +76,28 @@
keyboard {
compatible = "gpio-keys";
- button at 1 {
+ one {
linux,code = <KEY_1>;
label = "SW2-1";
wakeup-source;
debounce-interval = <20>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
- button at 2 {
+ two {
linux,code = <KEY_2>;
label = "SW2-2";
wakeup-source;
debounce-interval = <20>;
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
};
- button at 3 {
+ three {
linux,code = <KEY_3>;
label = "SW2-3";
wakeup-source;
debounce-interval = <20>;
gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
};
- button at 4 {
+ four {
linux,code = <KEY_4>;
label = "SW2-4";
wakeup-source;
@@ -119,7 +119,7 @@
};
};
- fixedregulator3v3: fixedregulator at 0 {
+ fixedregulator3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
@@ -128,7 +128,7 @@
regulator-always-on;
};
- vcc_sdhi0: regulator at 1 {
+ vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
@@ -139,7 +139,7 @@
enable-active-high;
};
- vccq_sdhi0: regulator at 2 {
+ vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
@@ -152,7 +152,7 @@
1800000 0>;
};
- vcc_sdhi2: regulator at 3 {
+ vcc_sdhi2: regulator-vcc-sdhi2 {
compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
@@ -163,7 +163,7 @@
enable-active-high;
};
- vccq_sdhi2: regulator at 4 {
+ vccq_sdhi2: regulator-vccq-sdhi2 {
compatible = "regulator-gpio";
regulator-name = "SDHI2 VccQ";
@@ -263,7 +263,7 @@
* instantiate the slave device at runtime according to the documentation.
* You can then communicate with the slave via IIC3.
*/
- i2cexio: i2c at 8 {
+ i2cexio: i2c-8 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic0>, <&i2c0>;
i2c-bus-name = "i2c-exio";
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 28/30] ARM: dts: marzen: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (26 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 27/30] ARM: dts: lager: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 0:59 ` [PATCH 29/30] ARM: dts: porter: " Simon Horman
` (2 subsequent siblings)
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /fixedregulator at 0 has a unit name, but no reg property
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779-marzen.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index b795da6f5503..cec79a6347c0 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -28,12 +28,12 @@
stdout-path = &scif2;
};
- memory {
+ memory at 60000000 {
device_type = "memory";
reg = <0x60000000 0x40000000>;
};
- fixedregulator3v3: fixedregulator at 0 {
+ fixedregulator3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 29/30] ARM: dts: porter: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (27 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 28/30] ARM: dts: marzen: " Simon Horman
@ 2016-06-08 0:59 ` Simon Horman
2016-06-08 1:00 ` [PATCH 30/30] ARM: dts: silk: " Simon Horman
2016-06-13 22:38 ` [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Olof Johansson
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 0:59 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /regulator at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 3 has a unit name, but no reg property
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791-porter.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 6a1bb1a8209b..e9151e946da8 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -46,7 +46,7 @@
reg = <2 0x00000000 0 0x40000000>;
};
- vcc_sdhi0: regulator at 0 {
+ vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
@@ -55,7 +55,7 @@
regulator-always-on;
};
- vccq_sdhi0: regulator at 1 {
+ vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
@@ -68,7 +68,7 @@
1800000 0>;
};
- vcc_sdhi2: regulator at 2 {
+ vcc_sdhi2: regulator-vcc-sdhi2 {
compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
@@ -77,7 +77,7 @@
regulator-always-on;
};
- vccq_sdhi2: regulator at 3 {
+ vccq_sdhi2: regulator-vccq-sdhi2 {
compatible = "regulator-gpio";
regulator-name = "SDHI2 VccQ";
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [PATCH 30/30] ARM: dts: silk: Fix W=1 dtc warnings
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (28 preceding siblings ...)
2016-06-08 0:59 ` [PATCH 29/30] ARM: dts: porter: " Simon Horman
@ 2016-06-08 1:00 ` Simon Horman
2016-06-13 22:38 ` [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Olof Johansson
30 siblings, 0 replies; 33+ messages in thread
From: Simon Horman @ 2016-06-08 1:00 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /regulator at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator at 4 has a unit name, but no reg property
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794-silk.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 56d98d5b2185..b8c7a63c5ec4 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -32,7 +32,7 @@
reg = <0 0x40000000 0 0x40000000>;
};
- d3_3v: regulator at 0 {
+ d3_3v: regulator-d3-3v {
compatible = "regulator-fixed";
regulator-name = "D3.3V";
regulator-min-microvolt = <3300000>;
@@ -41,7 +41,7 @@
regulator-always-on;
};
- vcc_sdhi1: regulator at 3 {
+ vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
regulator-name = "SDHI1 Vcc";
@@ -52,7 +52,7 @@
enable-active-high;
};
- vccq_sdhi1: regulator at 4 {
+ vccq_sdhi1: regulator-vccq-sdhi1 {
compatible = "regulator-gpio";
regulator-name = "SDHI1 VccQ";
--
2.1.4
^ permalink raw reply related [flat|nested] 33+ messages in thread* [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8
2016-06-08 0:59 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.8 Simon Horman
` (29 preceding siblings ...)
2016-06-08 1:00 ` [PATCH 30/30] ARM: dts: silk: " Simon Horman
@ 2016-06-13 22:38 ` Olof Johansson
30 siblings, 0 replies; 33+ messages in thread
From: Olof Johansson @ 2016-06-13 22:38 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jun 08, 2016 at 09:59:59AM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these Renesas ARM based SoC DT updates for v4.8.
>
>
> The following changes since commit 1a695a905c18548062509178b98bc91e67510864:
>
> Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.8
>
> for you to fetch changes up to b6960f19676e19f37a5e5a8af059fdf3b435d2f4:
>
> ARM: dts: silk: Fix W=1 dtc warnings (2016-05-30 09:37:13 +0900)
>
> ----------------------------------------------------------------
> Renesas ARM Based SoC DT Updates for v4.8
>
> * Fix W=1 dtc warnings
> * Reverence both DMA controllers on R-Car Gen 2 SoCs
> * Remove nonexistent thermal sensor clock from r8a7794 SoC
> * Correct unit names for cpu nodes on r8a7790 SoC
> * Add MMCIF0 to r8a7793 SoC
> * RTS/CTS hardware flow control for kzm9g and bockw boards
>
Merged, thanks.
-Olof
^ permalink raw reply [flat|nested] 33+ messages in thread