linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: hramrach@gmail.com (Michal Suchanek)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/13] sunxi spi fixes
Date: 13 Jun 2016 17:46:48 -0000	[thread overview]
Message-ID: <cover.1465490774.git.hramrach@gmail.com> (raw)

Hello,

This is update of the sunxi spi patches that should give full-featured SPI
driver.

First three patches fix issues with the current driver and can be of use for
stable kernels so adding cc for those.

I merged the sun4i and sun6i driver because there several issues that need to
be fixed in both separately and they are even out of sync wrt some fixes.
I guess some of the merge patches can be squashed.

I tested this with A10s Olinuxino Micro. I have no sun6i device so I cannot
tell if that side was broken by this patchset - especially the last patch that
adds DMA was afaik never tested on sun6i.


Emilio L?pez (1):
  spi: sun4i: add DMA support

Michal Suchanek (12):
  spi: sunxi: set maximum and minimum speed of SPI master
  spi: sunxi: fix transfer timeout
  spi: sun4i: fix FIFO limit
  spi: sunxi: expose maximum transfer size limit
  spi: sun6i: update CS handling from spi-sun4i
  spi: sunxi: rename sun4i,sun6i -> sunxi
  spi: sunxi: rename constants to match between sun4i and sun6i
  spi: sunxi: synchronize whitespace, comments, struct
  spi: sunxi: use register map
  spi: sunxi: merge sun4i and sun6i SPI driver
  dt: spi: sun4i: merge sun4i and sun6i binding doc
  spi: sunxi: remove CONFIG_SPI_SUN6I

 .../devicetree/bindings/spi/spi-sun4i.txt          |  21 +-
 .../devicetree/bindings/spi/spi-sun6i.txt          |  24 -
 arch/arm/configs/multi_v7_defconfig                |   1 -
 arch/arm/configs/sunxi_defconfig                   |   1 -
 drivers/spi/Kconfig                                |  10 +-
 drivers/spi/Makefile                               |   1 -
 drivers/spi/spi-sun4i.c                            | 728 +++++++++++++++++----
 drivers/spi/spi-sun6i.c                            | 482 --------------
 8 files changed, 600 insertions(+), 668 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spi/spi-sun6i.txt
 delete mode 100644 drivers/spi/spi-sun6i.c

-- 
2.8.1

             reply	other threads:[~2016-06-13 17:46 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-13 17:46 Michal Suchanek [this message]
2016-06-13 17:46 ` [PATCH v3 02/13] spi: sunxi: fix transfer timeout Michal Suchanek
2016-06-13 19:55   ` Maxime Ripard
2016-06-13 17:46 ` [PATCH v3 01/13] spi: sunxi: set maximum and minimum speed of SPI master Michal Suchanek
2016-06-13 19:55   ` Maxime Ripard
2016-06-13 17:46 ` [PATCH v3 03/13] spi: sun4i: fix FIFO limit Michal Suchanek
2016-06-13 19:56   ` Maxime Ripard
2016-06-13 17:46 ` [PATCH v3 04/13] spi: sunxi: expose maximum transfer size limit Michal Suchanek
2016-06-13 19:56   ` Maxime Ripard
2016-06-13 17:46 ` [PATCH v3 05/13] spi: sun6i: update CS handling from spi-sun4i Michal Suchanek
2016-06-13 17:46 ` [PATCH v3 06/13] spi: sunxi: rename sun4i,sun6i -> sunxi Michal Suchanek
2016-06-13 17:46 ` [PATCH v3 07/13] spi: sunxi: rename constants to match between sun4i and sun6i Michal Suchanek
2016-06-13 23:31   ` [linux-sunxi] " Julian Calaby
2016-06-14  4:43     ` Michal Suchanek
2016-06-13 17:46 ` [PATCH v3 08/13] spi: sunxi: synchronize whitespace, comments, struct Michal Suchanek
2016-06-13 17:46 ` [PATCH v3 09/13] spi: sunxi: use register map Michal Suchanek
2016-06-13 17:46 ` [PATCH v3 11/13] dt: spi: sun4i: merge sun4i and sun6i binding doc Michal Suchanek
2016-06-13 23:45   ` [linux-sunxi] " Julian Calaby
2016-06-14  4:40     ` Michal Suchanek
2016-06-14  4:48       ` Julian Calaby
2016-06-13 17:46 ` [PATCH v3 10/13] spi: sunxi: merge sun4i and sun6i SPI driver Michal Suchanek
2016-06-13 23:43   ` [linux-sunxi] " Julian Calaby
2016-06-14  4:34     ` Michal Suchanek
2016-06-14  4:47       ` Julian Calaby
2016-06-14  5:28         ` Michal Suchanek
2016-06-14  5:45           ` Julian Calaby
2016-06-14  6:35             ` Michal Suchanek
2016-06-14 11:20               ` Julian Calaby
2016-06-13 17:46 ` [PATCH v3 13/13] spi: sun4i: add DMA support Michal
2016-06-13 17:46 ` [PATCH v3 12/13] spi: sunxi: remove CONFIG_SPI_SUN6I Michal Suchanek
2016-06-13 19:57 ` [PATCH v3 00/13] sunxi spi fixes Maxime Ripard
2016-06-14  4:50   ` Michal Suchanek
2016-06-17 10:34   ` Michal Suchanek
2016-07-25  7:32     ` Maxime Ripard
2016-07-25  8:03       ` Michal Suchanek
2016-07-29 20:22         ` Maxime Ripard
2016-07-30 17:32           ` Michal Suchanek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1465490774.git.hramrach@gmail.com \
    --to=hramrach@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).