From: johnyoun@synopsys.com (John Youn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/30] usb: dwc2: Gadget descriptor DMA and IOT
Date: Mon, 07 Nov 2016 14:39:43 -0800 [thread overview]
Message-ID: <cover.1478558343.git.johnyoun@synopsys.com> (raw)
This series implements gadget-side descriptor DMA for the DWC_hsotg
controller.
It also includes support for DWC USB IOT controllers which use the
descriptor DMA mode of operation exclusively. These are two new
device-only USB controller IPs based on DWC_hsotg.
Tested on HAPS platform with:
* HSOTG IP version 3.30a
* FS/LS IOT IP version 1.00a
* HS IOT IP version 1.00a
This series should be applied on top of:
http://marc.info/?l=linux-usb&m=147822095118860&w=2
Regards,
John
John Youn (2):
usb: dwc2: Deprecate g-use-dma binding
usb: dwc2: Enable gadget DDMA by default for HAPS
Vahram Aharonyan (25):
usb: dwc2: Update DMA descriptor structure
usb: dwc2: gadget: Add descriptor DMA binding
usb: dwc2: gadget: Add DMA descriptor status quadlet fields
usb: dwc2: gadget: Enable BNA interrupt in descriptor DMA mode
usb: dwc2: gadget: Add DMA descriptor chains for EP 0
usb: dwc2: host: Rename MAX_DMA_DESC_SIZE to HOST_DMA_NBYTES_LIMIT
usb: dwc2: gadget: Transfer length limit checking for DDMA
usb: dwc2: gadget: Add DDMA chain pointers to dwc2_hsotg_ep structure
usb: dwc2: gadget: Add DDMA chain fill and parse functions
usb: dwc2: gadget: EP 0 specific DDMA programming
usb: dwc2: gadget: DDMA transfer start and complete
usb: dwc2: gadget: Fixes for StsPhseRcvd interrupt
usb: dwc2: gadget: Start DDMA IN status phase in StsPhseRcvd handler
usb: dwc2: gadget: Enable descriptor DMA mode
usb: dwc2: gadget: Add DDMA isoc related fields to dwc2_hsotg_ep
usb: dwc2: gadget: Fill isoc descriptor and start transfer in DDMA
usb: dwc2: gadget: Add completions for DDMA isoc transfers
usb: dwc2: gadget: In DDMA keep incompISOOUT and incompISOIN masked
usb: dwc2: gadget: Add start and complete calls for DDMA ISOC
usb: dwc2: gadget: Adjust ISOC OUT request's actual len for DDMA
usb: dwc2: gadget: Adjustments in debug prints
usb: dwc2: gadget: For DDMA parse setup only after SetUp interrupt
usb: dwc2: gadget: Correct dwc2_hsotg_ep_stop_xfr() function
usb: dwc2: gadget: Disable enabled HW endpoint in
dwc2_hsotg_ep_disable
usb: dwc2: Add support of dedicated full-speed PHY interface
Vardan Mikayelyan (3):
usb: dwc2: gadget: Add IOT device IDs, configure core accordingly
usb: dwc2: gadget: Program ep0_mps for LS
usb: dwc2: gadget: Add new core parameter for low speed
Documentation/devicetree/bindings/usb/dwc2.txt | 6 +-
arch/arm/boot/dts/rk3036.dtsi | 2 +-
arch/arm/boot/dts/rk3288.dtsi | 2 +-
arch/arm/boot/dts/rk3xxx.dtsi | 2 +-
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3368.dtsi | 2 +-
drivers/usb/dwc2/core.h | 48 ++
drivers/usb/dwc2/gadget.c | 978 ++++++++++++++++++++++---
drivers/usb/dwc2/hcd.c | 12 +-
drivers/usb/dwc2/hcd.h | 2 +-
drivers/usb/dwc2/hcd_ddma.c | 52 +-
drivers/usb/dwc2/hw.h | 48 +-
drivers/usb/dwc2/params.c | 42 +-
drivers/usb/dwc2/pci.c | 3 +-
14 files changed, 1039 insertions(+), 162 deletions(-)
--
2.10.0
next reply other threads:[~2016-11-07 22:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-07 22:39 John Youn [this message]
2016-11-07 22:39 ` [PATCH 01/30] usb: dwc2: Deprecate g-use-dma binding John Youn
2016-11-08 9:12 ` Felipe Balbi
2016-11-08 17:48 ` John Youn
2016-11-09 7:53 ` Felipe Balbi
2016-11-09 18:47 ` John Youn
2016-11-14 17:07 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1478558343.git.johnyoun@synopsys.com \
--to=johnyoun@synopsys.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).