* [PATCH 1/6] ARM: dts: gose: add HDMI input
2017-06-16 13:30 [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.13 Simon Horman
@ 2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` [PATCH 2/6] ARM: dts: r7s72100: Add support for GR-Peach Simon Horman
` (5 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Simon Horman @ 2017-06-16 13:30 UTC (permalink / raw)
To: linux-arm-kernel
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Identical to the setup on Koelsch.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 68 ++++++++++++++++++++++++++++++++++++--
1 file changed, 66 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 95e51b79c1d7..30f083528468 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -253,12 +253,23 @@
};
};
+ hdmi-in {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&adv7612_in>;
+ };
+ };
+ };
+
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
- hdmi_con: endpoint {
+ hdmi_con_out: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
@@ -395,6 +406,11 @@
groups = "audio_clk_a";
function = "audio_clk";
};
+
+ vin0_pins: vin0 {
+ groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+ function = "vin0";
+ };
};
ðer {
@@ -552,7 +568,34 @@
port at 1 {
reg = <1>;
adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con>;
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
+ hdmi-in at 4c {
+ compatible = "adi,adv7612";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ default-input = <0>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ adv7612_in: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+
+ port at 2 {
+ reg = <2>;
+ adv7612_out: endpoint {
+ remote-endpoint = <&vin0ep2>;
};
};
};
@@ -606,3 +649,24 @@
&ssi1 {
shared-pin;
};
+
+/* HDMI video input */
+&vin0 {
+ status = "okay";
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin0ep2: endpoint {
+ remote-endpoint = <&adv7612_out>;
+ bus-width = <24>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ data-active = <1>;
+ };
+ };
+};
--
2.1.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 2/6] ARM: dts: r7s72100: Add support for GR-Peach
2017-06-16 13:30 [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.13 Simon Horman
2017-06-16 13:30 ` [PATCH 1/6] ARM: dts: gose: add HDMI input Simon Horman
@ 2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` [PATCH 3/6] ARM: dts: gose: add composite video input Simon Horman
` (4 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Simon Horman @ 2017-06-16 13:30 UTC (permalink / raw)
To: linux-arm-kernel
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
Add device tree source for Renesas GR-Peach board.
GR-Peach is an RZ/A1H based board with 10MB of on-chip SRAM and 8MB
QSPI flash storage.
Add support for the board, and create a 2MB partition to use as rootfs.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Documentation/devicetree/bindings/arm/shmobile.txt | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/r7s72100-gr-peach.dts | 66 ++++++++++++++++++++++
3 files changed, 69 insertions(+)
create mode 100644 arch/arm/boot/dts/r7s72100-gr-peach.dts
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 170fe0562c63..4b60ce21f4f3 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -55,6 +55,8 @@ Boards:
compatible = "renesas,bockw", "renesas,r8a7778"
- Genmai (RTK772100BC00000BR)
compatible = "renesas,genmai", "renesas,r7s72100"
+ - GR-Peach (X28A-M01-E/F)
+ compatible = "renesas,gr-peach", "renesas,r7s72100"
- Gose (RTP0RC7793SEB00010S)
compatible = "renesas,gose", "renesas,r8a7793"
- H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKB00010S)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9c5e1d944d1c..9d64197f3e91 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -701,6 +701,7 @@ dtb-$(CONFIG_ARCH_REALVIEW) += \
dtb-$(CONFIG_ARCH_RENESAS) += \
emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
+ r7s72100-gr-peach.dtb \
r7s72100-rskrza1.dtb \
r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
new file mode 100644
index 000000000000..a1b2aef984f6
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
@@ -0,0 +1,66 @@
+/*
+ * Device Tree Source for the GR-Peach board
+ *
+ * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ * Copyright (C) 2016 Renesas Electronics
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r7s72100.dtsi"
+
+/ {
+ model = "GR-Peach";
+ compatible = "renesas,gr-peach", "renesas,r7s72100";
+
+ aliases {
+ serial0 = &scif2;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/mtdblock0";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 20000000 {
+ device_type = "memory";
+ reg = <0x20000000 0x00a00000>;
+
+ };
+
+ lbsc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ flash at 18000000 {
+ compatible = "mtd-rom";
+ probe-type = "map_rom";
+ reg = <0x18000000 0x00800000>;
+ bank-width = <4>;
+ device-width = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ rootfs at 600000 {
+ label = "rootfs";
+ reg = <0x00600000 0x00200000>;
+ };
+ };
+};
+
+&extal_clk {
+ clock-frequency = <13333000>;
+};
+
+&usb_x1_clk {
+ clock-frequency = <48000000>;
+};
+
+&scif2 {
+ status = "okay";
+};
--
2.1.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 3/6] ARM: dts: gose: add composite video input
2017-06-16 13:30 [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.13 Simon Horman
2017-06-16 13:30 ` [PATCH 1/6] ARM: dts: gose: add HDMI input Simon Horman
2017-06-16 13:30 ` [PATCH 2/6] ARM: dts: r7s72100: Add support for GR-Peach Simon Horman
@ 2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` [PATCH 4/6] ARM: dts: iwg20m: Add iWave RZG1M Qseven SOM Simon Horman
` (3 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Simon Horman @ 2017-06-16 13:30 UTC (permalink / raw)
To: linux-arm-kernel
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Adds VIN, decoder and connector.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 59 ++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 30f083528468..76e3aca2029e 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -275,6 +275,16 @@
};
};
+ composite-in {
+ compatible = "composite-video-connector";
+
+ port {
+ composite_con_in: endpoint {
+ remote-endpoint = <&adv7180_in>;
+ };
+ };
+ };
+
x2_clk: x2-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -411,6 +421,11 @@
groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
function = "vin0";
};
+
+ vin1_pins: vin1 {
+ groups = "vin1_data8", "vin1_clk";
+ function = "vin1";
+ };
};
ðer {
@@ -542,6 +557,32 @@
reg = <0x12>;
};
+ composite-in at 20 {
+ compatible = "adi,adv7180cp";
+ reg = <0x20>;
+ remote = <&vin1>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ adv7180_in: endpoint {
+ remote-endpoint = <&composite_con_in>;
+ };
+ };
+
+ port at 3 {
+ reg = <3>;
+ adv7180_out: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep>;
+ };
+ };
+ };
+ };
+
hdmi at 39 {
compatible = "adi,adv7511w";
reg = <0x39>;
@@ -670,3 +711,21 @@
};
};
};
+
+/* composite video input */
+&vin1 {
+ pinctrl-0 = <&vin1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin1ep: endpoint {
+ remote-endpoint = <&adv7180_out>;
+ bus-width = <8>;
+ };
+ };
+};
--
2.1.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 4/6] ARM: dts: iwg20m: Add iWave RZG1M Qseven SOM
2017-06-16 13:30 [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.13 Simon Horman
` (2 preceding siblings ...)
2017-06-16 13:30 ` [PATCH 3/6] ARM: dts: gose: add composite video input Simon Horman
@ 2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` [PATCH 5/6] ARM: dts: iwg20d-q7: Add support for iWave G20D-Q7 board based on RZ/G1M Simon Horman
` (2 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Simon Horman @ 2017-06-16 13:30 UTC (permalink / raw)
To: linux-arm-kernel
From: Biju Das <biju.das@bp.renesas.com>
Add support for iWave RZG1M Qseven System On Module.
http://www.iwavesystems.com/rz-g1m-qseven-module.html
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743-iwg20m.dtsi | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 arch/arm/boot/dts/r8a7743-iwg20m.dtsi
diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
new file mode 100644
index 000000000000..001ca9144f4b
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
@@ -0,0 +1,29 @@
+/*
+ * Device Tree Source for the iWave-RZG1M-20M Qseven SOM
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "r8a7743.dtsi"
+
+/ {
+ compatible = "iwave,g20m", "renesas,r8a7743";
+
+ memory at 40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x20000000>;
+ };
+
+ memory at 200000000 {
+ device_type = "memory";
+ reg = <2 0x00000000 0 0x20000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
--
2.1.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 5/6] ARM: dts: iwg20d-q7: Add support for iWave G20D-Q7 board based on RZ/G1M
2017-06-16 13:30 [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.13 Simon Horman
` (3 preceding siblings ...)
2017-06-16 13:30 ` [PATCH 4/6] ARM: dts: iwg20m: Add iWave RZG1M Qseven SOM Simon Horman
@ 2017-06-16 13:30 ` Simon Horman
2017-06-16 13:30 ` [PATCH 6/6] ARM: dts: r8a779x: Fix PCI bus dtc warnings Simon Horman
2017-06-19 5:50 ` [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.13 Olof Johansson
6 siblings, 0 replies; 8+ messages in thread
From: Simon Horman @ 2017-06-16 13:30 UTC (permalink / raw)
To: linux-arm-kernel
From: Biju Das <biju.das@bp.renesas.com>
Add support for iWave RainboW-G20D-Qseven board based on RZ/G1M.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 25 +++++++++++++++++++++++++
2 files changed, 26 insertions(+)
create mode 100644 arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9d64197f3e91..77d7e2db2513 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -705,6 +705,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
r7s72100-rskrza1.dtb \
r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
+ r8a7743-iwg20d-q7.dtb \
r8a7743-sk-rzg1m.dtb \
r8a7745-sk-rzg1e.dtb \
r8a7778-bockw.dtb \
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
new file mode 100644
index 000000000000..9b54783cc2a5
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
@@ -0,0 +1,25 @@
+/*
+ * Device Tree Source for the iWave-RZG1M Qseven carrier board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7743-iwg20m.dtsi"
+
+/ {
+ model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M";
+ compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
+
+ aliases {
+ serial0 = &scif0;
+ };
+};
+
+&scif0 {
+ status = "okay";
+};
--
2.1.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 6/6] ARM: dts: r8a779x: Fix PCI bus dtc warnings
2017-06-16 13:30 [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.13 Simon Horman
` (4 preceding siblings ...)
2017-06-16 13:30 ` [PATCH 5/6] ARM: dts: iwg20d-q7: Add support for iWave G20D-Q7 board based on RZ/G1M Simon Horman
@ 2017-06-16 13:30 ` Simon Horman
2017-06-19 5:50 ` [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.13 Olof Johansson
6 siblings, 0 replies; 8+ messages in thread
From: Simon Horman @ 2017-06-16 13:30 UTC (permalink / raw)
To: linux-arm-kernel
From: Rob Herring <robh@kernel.org>
The bogus 'device_type = "pci"' confuses dtc, causing lots of totally
unrelated warnings. After fixing that, real warnings like
arch/arm/boot/dts/r8a7790-lager.dtb: Warning (pci_device_reg): Node /pci at ee090000/usb at 0,1 PCI unit address format error, expected "1,0"
are left. Correct the unit-addresses and reg properties of the subnodes
to fix these.
Signed-off-by: Rob Herring <robh@kernel.org>
[geert: Improve description]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 16 ++++++----------
arch/arm/boot/dts/r8a7791.dtsi | 16 ++++++----------
arch/arm/boot/dts/r8a7794.dtsi | 16 ++++++----------
3 files changed, 18 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 416956a42c93..2805a8608d4b 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1602,16 +1602,14 @@
0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- usb at 0,1 {
+ usb at 1,0 {
reg = <0x800 0 0 0 0>;
- device_type = "pci";
phys = <&usb0 0>;
phy-names = "usb";
};
- usb at 0,2 {
+ usb at 2,0 {
reg = <0x1000 0 0 0 0>;
- device_type = "pci";
phys = <&usb0 0>;
phy-names = "usb";
};
@@ -1658,16 +1656,14 @@
0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- usb at 0,1 {
- reg = <0x800 0 0 0 0>;
- device_type = "pci";
+ usb at 1,0 {
+ reg = <0x20800 0 0 0 0>;
phys = <&usb2 0>;
phy-names = "usb";
};
- usb at 0,2 {
- reg = <0x1000 0 0 0 0>;
- device_type = "pci";
+ usb at 2,0 {
+ reg = <0x21000 0 0 0 0>;
phys = <&usb2 0>;
phy-names = "usb";
};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index b730c889a404..bd93f699ad84 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1613,16 +1613,14 @@
0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- usb at 0,1 {
+ usb at 1,0 {
reg = <0x800 0 0 0 0>;
- device_type = "pci";
phys = <&usb0 0>;
phy-names = "usb";
};
- usb at 0,2 {
+ usb at 2,0 {
reg = <0x1000 0 0 0 0>;
- device_type = "pci";
phys = <&usb0 0>;
phy-names = "usb";
};
@@ -1648,16 +1646,14 @@
0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- usb at 0,1 {
- reg = <0x800 0 0 0 0>;
- device_type = "pci";
+ usb at 1,0 {
+ reg = <0x10800 0 0 0 0>;
phys = <&usb2 0>;
phy-names = "usb";
};
- usb at 0,2 {
- reg = <0x1000 0 0 0 0>;
- device_type = "pci";
+ usb at 2,0 {
+ reg = <0x11000 0 0 0 0>;
phys = <&usb2 0>;
phy-names = "usb";
};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index a19b884fb258..7d9a81d970d8 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -820,16 +820,14 @@
0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- usb at 0,1 {
+ usb at 1,0 {
reg = <0x800 0 0 0 0>;
- device_type = "pci";
phys = <&usb0 0>;
phy-names = "usb";
};
- usb at 0,2 {
+ usb at 2,0 {
reg = <0x1000 0 0 0 0>;
- device_type = "pci";
phys = <&usb0 0>;
phy-names = "usb";
};
@@ -855,16 +853,14 @@
0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- usb at 0,1 {
- reg = <0x800 0 0 0 0>;
- device_type = "pci";
+ usb at 1,0 {
+ reg = <0x10800 0 0 0 0>;
phys = <&usb2 0>;
phy-names = "usb";
};
- usb at 0,2 {
- reg = <0x1000 0 0 0 0>;
- device_type = "pci";
+ usb at 2,0 {
+ reg = <0x11000 0 0 0 0>;
phys = <&usb2 0>;
phy-names = "usb";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.13
2017-06-16 13:30 [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.13 Simon Horman
` (5 preceding siblings ...)
2017-06-16 13:30 ` [PATCH 6/6] ARM: dts: r8a779x: Fix PCI bus dtc warnings Simon Horman
@ 2017-06-19 5:50 ` Olof Johansson
6 siblings, 0 replies; 8+ messages in thread
From: Olof Johansson @ 2017-06-19 5:50 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jun 16, 2017 at 03:30:45PM +0200, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these second round of Renesas ARM based SoC DT updates for v4.13.
>
> This pull request is based on the previous round of
> such requests, tagged as renesas-dt-for-v4.13,
> which you have already merged.
>
>
> The following changes since commit 2ae0fcc57e00c11fae80678e2a9fabbeec82a185:
>
> ARM: dts: renesas: Switch to panel-lvds bindings for Mitsubishi panels (2017-05-15 11:14:39 +0200)
>
> are available in the git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt2-for-v4.13
>
> for you to fetch changes up to f7d569c1e6a6fa731fc34083a9f0191b7360eeb1:
>
> ARM: dts: r8a779x: Fix PCI bus dtc warnings (2017-06-12 11:18:30 +0200)
>
> ----------------------------------------------------------------
> Second Round of Renesas ARM Based SoC DT Updates for v4.13
>
> Cleanup:
> * Correct PCI bus dtc warnings for r8a779x SoCs
>
> Enhancements:
> * Add support for iWave G20D-Q7 board based on RZ/G1M SoC
> * Add support for GR-Peach board based on r7s72100 SoC
> * Add composite video and HDMI input to gose board
Merged, thanks!
-Olof
^ permalink raw reply [flat|nested] 8+ messages in thread