[PATCH v2 00/10] update MT7623 and MT2701 dts

[PATCH v2 00/10] update MT7623 and MT2701 dts

[Ryder Lee]

Hi Matthias,

This patch series adds/corrects some device nodes for both MT7623 and MT2701.

changes since v2:
- move non-common part and non-display related nodes to different patches.
- remove unused wdma node.
- add display related nodes for MT2701.

changes since v1:
- rebase to v4.14.
- sort nodes in alphabetical order.

Ryder Lee (7):
  arm: dts: mediatek: update audio node for mt2701 and mt7623
  arm: dts: mt7623: update pio, usb and crypto nodes
  arm: dts: mt7623: add subsystem clock controller nodes
  arm: dts: mt7623: add iommmu and jpecdec nodes
  arm: dts: mt7623: add display subsystem related nodes
  arm: dts: mt7623: enable bananapi-r2 display function
  arm: dts: mt7623: add PCIe related nodes

Weiqing Kong (2):
  arm: dts: mt2701: add pwm backlight device node
  arm: dts: mt2701: enable display pwm backlight

YT Shen (1):
  arm: dts: mt2701: add display subsystem related nodes

 arch/arm/boot/dts/mt2701-evb.dts              |  23 ++
 arch/arm/boot/dts/mt2701.dtsi                 |  88 ++++++-
 arch/arm/boot/dts/mt7623.dtsi                 | 364 ++++++++++++++++++++++++--
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts |  71 ++++-
 include/dt-bindings/pinctrl/mt7623-pinfunc.h  |  12 +
 5 files changed, 529 insertions(+), 29 deletions(-)

-- 
1.9.1

[PATCH v2 01/10] arm: dts: mt2701: add pwm backlight device node

[Ryder Lee]

From: Weiqing Kong <weiqing.kong@mediatek.com>

This patch adds the device node for MT2701 pwm backlight.

Signed-off-by: Weiqing Kong <weiqing.kong@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm/boot/dts/mt2701.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index afe12e5..3c85879 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -530,6 +530,15 @@
 		#clock-cells = <1>;
 	};
 
+	bls: pwm at 1400a000 {
+		compatible = "mediatek,mt2701-disp-pwm";
+		reg = <0 0x1400a000 0 0x1000>;
+		#pwm-cells = <2>;
+		clocks = <&mmsys CLK_MM_MDP_BLS_26M>, <&mmsys CLK_MM_DISP_BLS>;
+		clock-names = "main", "mm";
+		status = "disabled";
+	};
+
 	larb0: larb at 14010000 {
 		compatible = "mediatek,mt2701-smi-larb";
 		reg = <0 0x14010000 0 0x1000>;
-- 
1.9.1

[PATCH v2 02/10] arm: dts: mt2701: enable display pwm backlight

[Ryder Lee]

From: Weiqing Kong <weiqing.kong@mediatek.com>

This patch adds board related config for MT2701 pwm backlight.

Signed-off-by: Weiqing Kong <weiqing.kong@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm/boot/dts/mt2701-evb.dts | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index f484973..63af4b1 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -56,12 +56,29 @@
 	bt_sco_codec:bt_sco_codec {
 		compatible = "linux,bt-sco";
 	};
+
+	backlight_lcd: backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&bls 0 100000>;
+		brightness-levels = <
+			  0  16  32  48  64  80  96 112
+			128 144 160 176 192 208 224 240
+			255
+		>;
+		default-brightness-level = <9>;
+	};
 };
 
 &auxadc {
 	status = "okay";
 };
 
+&bls {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_bls_gpio>;
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
@@ -111,6 +128,12 @@
 		};
 	};
 
+	pwm_bls_gpio: pwm_bls_gpio {
+		pins_cmd_dat {
+			pinmux = <MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM>;
+		};
+	};
+
 	spi_pins_a: spi0 at 0 {
 		pins_spi {
 			pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>,
-- 
1.9.1

[PATCH v2 03/10] arm: dts: mt2701: add display subsystem related nodes

[Ryder Lee]

From: YT Shen <yt.shen@mediatek.com>

This patch adds the device nodes for MT2701 DISP function blocks.

Signed-off-by: YT Shen <yt.shen@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lo@mediatek.com>
---
 arch/arm/boot/dts/mt2701.dtsi | 75 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 3c85879..8c9fbe5 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -26,6 +26,11 @@
 	compatible = "mediatek,mt2701";
 	interrupt-parent = <&cirq>;
 
+	aliases {
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -203,6 +208,16 @@
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
 	};
 
+	mipi_tx0: mipi-dphy at 10010000 {
+		compatible = "mediatek,mt2701-mipi-tx";
+		reg = <0 0x10010000 0 0x90>;
+		clocks = <&clk26m>;
+		clock-output-names = "mipi_tx0_pll";
+		#clock-cells = <0>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
 	sysirq: interrupt-controller at 10200100 {
 		compatible = "mediatek,mt2701-sysirq",
 			     "mediatek,mt6577-sysirq";
@@ -530,6 +545,30 @@
 		#clock-cells = <1>;
 	};
 
+	display_components: dispsys at 14000000 {
+		compatible = "mediatek,mt2701-mmsys";
+		reg = <0 0x14000000 0 0x1000>;
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	ovl: ovl at 14007000 {
+		compatible = "mediatek,mt2701-disp-ovl";
+		reg = <0 0x14007000 0 0x1000>;
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_OVL>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+		mediatek,larb = <&larb0>;
+	};
+
+	rdma0: rdma at 14008000 {
+		compatible = "mediatek,mt2701-disp-rdma";
+		reg = <0 0x14008000 0 0x1000>;
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+		mediatek,larb = <&larb0>;
+	};
+
 	bls: pwm at 1400a000 {
 		compatible = "mediatek,mt2701-disp-pwm";
 		reg = <0 0x1400a000 0 0x1000>;
@@ -539,6 +578,33 @@
 		status = "disabled";
 	};
 
+	color: color at 1400b000 {
+		compatible = "mediatek,mt2701-disp-color";
+		reg = <0 0x1400b000 0 0x1000>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_COLOR>;
+	};
+
+	dsi: dsi at 1400c000 {
+		compatible = "mediatek,mt2701-dsi";
+		reg = <0 0x1400c000 0 0x1000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+			 <&mmsys CLK_MM_DSI_DIG>,
+			 <&mipi_tx0>;
+		clock-names = "engine", "digital", "hs";
+		phys = <&mipi_tx0>;
+		phy-names = "dphy";
+		status = "disabled";
+	};
+
+	mutex: mutex at 1400e000 {
+		compatible = "mediatek,mt2701-disp-mutex";
+		reg = <0 0x1400e000 0 0x1000>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_MUTEX_32K>;
+	};
+
 	larb0: larb at 14010000 {
 		compatible = "mediatek,mt2701-smi-larb";
 		reg = <0 0x14010000 0 0x1000>;
@@ -550,6 +616,15 @@
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
 	};
 
+	rdma1: rdma at 14012000 {
+		compatible = "mediatek,mt2701-disp-rdma";
+		reg = <0 0x14012000 0 0x1000>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+		mediatek,larb = <&larb0>;
+	};
+
 	imgsys: syscon at 15000000 {
 		compatible = "mediatek,mt2701-imgsys", "syscon";
 		reg = <0 0x15000000 0 0x1000>;
-- 
1.9.1

[PATCH v2 04/10] arm: dts: mediatek: update audio node for mt2701 and mt7623

[Ryder Lee]

This patch adds interrupt-names property in audio node so that
binding can be agnostic of the IRQ order.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm/boot/dts/mt2701.dtsi | 4 +++-
 arch/arm/boot/dts/mt7623.dtsi | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 8c9fbe5..ecd388a 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -445,7 +445,9 @@
 		compatible = "mediatek,mt2701-audio";
 		reg = <0 0x11220000 0 0x2000>,
 		      <0 0x112a0000 0 0x20000>;
-		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+		interrupts =  <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+			      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names	= "afe", "asys";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
 
 		clocks = <&infracfg CLK_INFRA_AUDIO>,
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index ec8a074..381843e 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -544,7 +544,9 @@
 			     "mediatek,mt2701-audio";
 		reg = <0 0x11220000 0 0x2000>,
 		      <0 0x112a0000 0 0x20000>;
-		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+		interrupts =  <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+			      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names	= "afe", "asys";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
 
 		clocks = <&infracfg CLK_INFRA_AUDIO>,
-- 
1.9.1

[PATCH v2 05/10] arm: dts: mt7623: update pio, usb and crypto nodes

[Ryder Lee]

This patch updates pio, usb and crypto nodes to make them be consistent
with the binding documents.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi | 52 ++++++++++++++++++++++---------------------
 1 file changed, 27 insertions(+), 25 deletions(-)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 381843e..9ec3767 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -226,21 +226,6 @@
 		#reset-cells = <1>;
 	};
 
-	pio: pinctrl at 10005000 {
-		compatible = "mediatek,mt7623-pinctrl",
-			     "mediatek,mt2701-pinctrl";
-		reg = <0 0x1000b000 0 0x1000>;
-		mediatek,pctl-regmap = <&syscfg_pctl_a>;
-		pins-are-numbered;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
 	syscfg_pctl_a: syscfg at 10005000 {
 		compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
 		reg = <0 0x10005000 0 0x1000>;
@@ -274,6 +259,20 @@
 		clock-names = "system-clk", "rtc-clk";
 	};
 
+	pio: pinctrl at 1000b000 {
+		compatible = "mediatek,mt7623-pinctrl";
+		reg = <0 0x1000b000 0 0x1000>;
+		mediatek,pctl-regmap = <&syscfg_pctl_a>;
+		pins-are-numbered;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	pwrap: pwrap at 1000d000 {
 		compatible = "mediatek,mt7623-pwrap",
 			     "mediatek,mt2701-pwrap";
@@ -680,7 +679,7 @@
 		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
 			 <&topckgen CLK_TOP_ETHIF_SEL>;
-		clock-names = "sys_ck", "free_ck";
+		clock-names = "sys_ck", "ref_ck";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
 		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
 		status = "disabled";
@@ -690,8 +689,6 @@
 		compatible = "mediatek,mt7623-u3phy",
 			     "mediatek,mt2701-u3phy";
 		reg = <0 0x1a1c4000 0 0x0700>;
-		clocks = <&clk26m>;
-		clock-names = "u3phya_ref";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -699,12 +696,16 @@
 
 		u2port0: usb-phy at 1a1c4800 {
 			reg = <0 0x1a1c4800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
 			#phy-cells = <1>;
 			status = "okay";
 		};
 
 		u3port0: usb-phy at 1a1c4900 {
 			reg = <0 0x1a1c4900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
 			#phy-cells = <1>;
 			status = "okay";
 		};
@@ -719,7 +720,7 @@
 		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
 			 <&topckgen CLK_TOP_ETHIF_SEL>;
-		clock-names = "sys_ck", "free_ck";
+		clock-names = "sys_ck", "ref_ck";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
 		phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
 		status = "disabled";
@@ -729,8 +730,6 @@
 		compatible = "mediatek,mt7623-u3phy",
 			     "mediatek,mt2701-u3phy";
 		reg = <0 0x1a244000 0 0x0700>;
-		clocks = <&clk26m>;
-		clock-names = "u3phya_ref";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -738,12 +737,16 @@
 
 		u2port1: usb-phy at 1a244800 {
 			reg = <0 0x1a244800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
 			#phy-cells = <1>;
 			status = "okay";
 		};
 
 		u3port1: usb-phy at 1a244900 {
 			reg = <0 0x1a244900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
 			#phy-cells = <1>;
 			status = "okay";
 		};
@@ -784,16 +787,15 @@
 	};
 
 	crypto: crypto at 1b240000 {
-		compatible = "mediatek,mt7623-crypto";
+		compatible = "mediatek,eip97-crypto";
 		reg = <0 0x1b240000 0 0x20000>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
-			 <&ethsys CLK_ETHSYS_CRYPTO>;
-		clock-names = "ethif","cryp";
+		clocks = <&ethsys CLK_ETHSYS_CRYPTO>;
+		clock-names = "cryp";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
 		status = "disabled";
 	};
-- 
1.9.1

[PATCH v2 05/10] arm: dts: mt7623: update pio, usb and crypto nodes

[Yingjoe Chen]

On Tue, 2017-09-26 at 10:02 +0800, Ryder Lee wrote:
> This patch updates pio, usb and crypto nodes to make them be consistent
> with the binding documents.
> 
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
>  arch/arm/boot/dts/mt7623.dtsi | 52 ++++++++++++++++++++++---------------------
>  1 file changed, 27 insertions(+), 25 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 381843e..9ec3767 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -226,21 +226,6 @@
>  		#reset-cells = <1>;
>  	};
>  
> -	pio: pinctrl at 10005000 {
> -		compatible = "mediatek,mt7623-pinctrl",
> -			     "mediatek,mt2701-pinctrl";
> -		reg = <0 0x1000b000 0 0x1000>;
> -		mediatek,pctl-regmap = <&syscfg_pctl_a>;
> -		pins-are-numbered;
> -		gpio-controller;
> -		#gpio-cells = <2>;
> -		interrupt-controller;
> -		interrupt-parent = <&gic>;
> -		#interrupt-cells = <2>;
> -		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> -			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> -	};
> -
>  	syscfg_pctl_a: syscfg at 10005000 {
>  		compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
>  		reg = <0 0x10005000 0 0x1000>;


Hi Ryder,

pio node is special, it have 2 registers space.
The address 10005000 is for PIO, it was accesed through syscfg_pctl_a
regmap. The other one, 0x1000b000, is for EINT.

So,I think using address @10005000 is correct.

Joe.C

[PATCH v2 05/10] arm: dts: mt7623: update pio, usb and crypto nodes

[Ryder Lee]

On Tue, 2017-09-26 at 18:17 +0800, Yingjoe Chen wrote:
> On Tue, 2017-09-26 at 10:02 +0800, Ryder Lee wrote:
> > This patch updates pio, usb and crypto nodes to make them be consistent
> > with the binding documents.
> > 
> > Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> > ---
> >  arch/arm/boot/dts/mt7623.dtsi | 52 ++++++++++++++++++++++---------------------
> >  1 file changed, 27 insertions(+), 25 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> > index 381843e..9ec3767 100644
> > --- a/arch/arm/boot/dts/mt7623.dtsi
> > +++ b/arch/arm/boot/dts/mt7623.dtsi
> > @@ -226,21 +226,6 @@
> >  		#reset-cells = <1>;
> >  	};
> >  
> > -	pio: pinctrl at 10005000 {
> > -		compatible = "mediatek,mt7623-pinctrl",
> > -			     "mediatek,mt2701-pinctrl";
> > -		reg = <0 0x1000b000 0 0x1000>;
> > -		mediatek,pctl-regmap = <&syscfg_pctl_a>;
> > -		pins-are-numbered;
> > -		gpio-controller;
> > -		#gpio-cells = <2>;
> > -		interrupt-controller;
> > -		interrupt-parent = <&gic>;
> > -		#interrupt-cells = <2>;
> > -		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> > -			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> > -	};
> > -
> >  	syscfg_pctl_a: syscfg at 10005000 {
> >  		compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
> >  		reg = <0 0x10005000 0 0x1000>;
> 
> 
> Hi Ryder,
> 
> pio node is special, it have 2 registers space.
> The address 10005000 is for PIO, it was accesed through syscfg_pctl_a
> regmap. The other one, 0x1000b000, is for EINT.
> 
> So,I think using address @10005000 is correct.
> 
> Joe.C
> 

Thanks for explanation. I'll revert this part to a previous state.

> 

[PATCH v2 06/10] arm: dts: mt7623: add subsystem clock controller nodes

[Ryder Lee]

This patch adds missing susbsystem clock controllers nodes for MT7623.
(e.g., mmsys, imgsys, vdecsys and bdpsys)

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 9ec3767..ca672bd 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -661,6 +661,30 @@
 		status = "disabled";
 	};
 
+	mmsys: syscon at 14000000 {
+		compatible = "mediatek,mt7623-mmsys",
+			     "mediatek,mt2701-mmsys",
+			     "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	imgsys: syscon at 15000000 {
+		compatible = "mediatek,mt7623-imgsys",
+			     "mediatek,mt2701-imgsys",
+			     "syscon";
+		reg = <0 0x15000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	vdecsys: syscon at 16000000 {
+		compatible = "mediatek,mt7623-vdecsys",
+			     "mediatek,mt2701-vdecsys",
+			     "syscon";
+		reg = <0 0x16000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	hifsys: syscon at 1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
@@ -799,4 +823,12 @@
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
 		status = "disabled";
 	};
+
+	bdpsys: syscon at 1c000000 {
+		compatible = "mediatek,mt7623-bdpsys",
+			     "mediatek,mt2701-bdpsys",
+			     "syscon";
+		reg = <0 0x1c000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
 };
-- 
1.9.1

[PATCH v2 07/10] arm: dts: mt7623: add iommmu and jpecdec nodes

[Ryder Lee]

This patch adds iommu and jpecdec nodes for MT7623.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi | 74 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index ca672bd..c3ce0b0 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -20,6 +20,7 @@
 #include <dt-bindings/power/mt2701-power.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
 #include <dt-bindings/reset/mt2701-resets.h>
 #include <dt-bindings/thermal/thermal.h>
 #include "skeleton64.dtsi"
@@ -273,6 +274,17 @@
 			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	smi_common: smi at 1000c000 {
+		compatible = "mediatek,mt7623-smi-common",
+			     "mediatek,mt2701-smi-common";
+		reg = <0 0x1000c000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_SMI>,
+			 <&mmsys CLK_MM_SMI_COMMON>,
+			 <&infracfg CLK_INFRA_SMI>;
+		clock-names = "apb", "smi", "async";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
 	pwrap: pwrap at 1000d000 {
 		compatible = "mediatek,mt7623-pwrap",
 			     "mediatek,mt2701-pwrap";
@@ -304,6 +316,17 @@
 		reg = <0 0x10200100 0 0x1c>;
 	};
 
+	iommu: mmsys_iommu at 10205000 {
+		compatible = "mediatek,mt7623-m4u",
+			     "mediatek,mt2701-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,larbs = <&larb0 &larb1 &larb2>;
+		#iommu-cells = <1>;
+	};
+
 	efuse: efuse at 10206000 {
 		compatible = "mediatek,mt7623-efuse",
 			     "mediatek,mt8173-efuse";
@@ -669,6 +692,18 @@
 		#clock-cells = <1>;
 	};
 
+	larb0: larb at 14010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x14010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <0>;
+		clocks = <&mmsys CLK_MM_SMI_LARB0>,
+			 <&mmsys CLK_MM_SMI_LARB0>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
 	imgsys: syscon at 15000000 {
 		compatible = "mediatek,mt7623-imgsys",
 			     "mediatek,mt2701-imgsys",
@@ -677,6 +712,33 @@
 		#clock-cells = <1>;
 	};
 
+	larb2: larb at 15001000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x15001000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <2>;
+		clocks = <&imgsys CLK_IMG_SMI_COMM>,
+			 <&imgsys CLK_IMG_SMI_COMM>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+	};
+
+	jpegdec: jpegdec at 15004000 {
+		compatible = "mediatek,mt7623-jpgdec",
+			     "mediatek,mt2701-jpgdec";
+		reg = <0 0x15004000 0 0x1000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+			  <&imgsys CLK_IMG_JPGDEC>;
+		clock-names = "jpgdec-smi",
+			      "jpgdec";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		mediatek,larb = <&larb2>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+	};
+
 	vdecsys: syscon at 16000000 {
 		compatible = "mediatek,mt7623-vdecsys",
 			     "mediatek,mt2701-vdecsys",
@@ -685,6 +747,18 @@
 		#clock-cells = <1>;
 	};
 
+	larb1: larb at 16010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x16010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <1>;
+		clocks = <&vdecsys CLK_VDEC_CKGEN>,
+			 <&vdecsys CLK_VDEC_LARB>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+	};
+
 	hifsys: syscon at 1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
 			     "mediatek,mt2701-hifsys",
-- 
1.9.1

[PATCH v2 08/10] arm: dts: mt7623: add display subsystem related nodes

[Ryder Lee]

This patch adds the device nodes for the display function blocks.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi | 94 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index c3ce0b0..043bae6 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -29,6 +29,11 @@
 	compatible = "mediatek,mt7623";
 	interrupt-parent = <&sysirq>;
 
+	aliases {
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
 	cpu_opp_table: opp_table {
 		compatible = "operating-points-v2";
 		opp-shared;
@@ -298,6 +303,17 @@
 		clock-names = "spi", "wrap";
 	};
 
+	mipi_tx0: mipi-dphy at 10010000 {
+		compatible = "mediatek,mt7623-mipi-tx",
+			     "mediatek,mt2701-mipi-tx";
+		reg = <0 0x10010000 0 0x90>;
+		clocks = <&clk26m>;
+		clock-output-names = "mipi_tx0_pll";
+		#clock-cells = <0>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
 	cir: cir at 10013000 {
 		compatible = "mediatek,mt7623-cir";
 		reg = <0 0x10013000 0 0x1000>;
@@ -692,6 +708,74 @@
 		#clock-cells = <1>;
 	};
 
+	display_components: dispsys at 14000000 {
+		compatible = "mediatek,mt7623-mmsys",
+			     "mediatek,mt2701-mmsys";
+		reg = <0 0x14000000 0 0x1000>;
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	ovl: ovl at 14007000 {
+		compatible = "mediatek,mt7623-disp-ovl",
+			     "mediatek,mt2701-disp-ovl";
+		reg = <0 0x14007000 0 0x1000>;
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_OVL>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+		mediatek,larb = <&larb0>;
+	};
+
+	rdma0: rdma at 14008000 {
+		compatible = "mediatek,mt7623-disp-rdma",
+			     "mediatek,mt2701-disp-rdma";
+		reg = <0 0x14008000 0 0x1000>;
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+		mediatek,larb = <&larb0>;
+	};
+
+	bls: pwm at 1400a000 {
+		compatible = "mediatek,mt7623-disp-pwm",
+			     "mediatek,mt2701-disp-pwm";
+		reg = <0 0x1400a000 0 0x1000>;
+		#pwm-cells = <2>;
+		clocks = <&mmsys CLK_MM_MDP_BLS_26M>,
+			 <&mmsys CLK_MM_DISP_BLS>;
+		clock-names = "main", "mm";
+		status = "disabled";
+	};
+
+	color: color at 1400b000 {
+		compatible = "mediatek,mt7623-disp-color",
+			     "mediatek,mt2701-disp-color";
+		reg = <0 0x1400b000 0 0x1000>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_COLOR>;
+	};
+
+	dsi: dsi at 1400c000 {
+		compatible = "mediatek,mt7623-dsi",
+			     "mediatek,mt2701-dsi";
+		reg = <0 0x1400c000 0 0x1000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+			 <&mmsys CLK_MM_DSI_DIG>,
+			 <&mipi_tx0>;
+		clock-names = "engine", "digital", "hs";
+		phys = <&mipi_tx0>;
+		phy-names = "dphy";
+		status = "disabled";
+	};
+
+	mutex: mutex at 1400e000 {
+		compatible = "mediatek,mt7623-disp-mutex",
+			     "mediatek,mt2701-disp-mutex";
+		reg = <0 0x1400e000 0 0x1000>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_MUTEX_32K>;
+	};
+
 	larb0: larb at 14010000 {
 		compatible = "mediatek,mt7623-smi-larb",
 			     "mediatek,mt2701-smi-larb";
@@ -704,6 +788,16 @@
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
 	};
 
+	rdma1: rdma at 14012000 {
+		compatible = "mediatek,mt7623-disp-rdma",
+			     "mediatek,mt2701-disp-rdma";
+		reg = <0 0x14012000 0 0x1000>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+		mediatek,larb = <&larb0>;
+	};
+
 	imgsys: syscon at 15000000 {
 		compatible = "mediatek,mt7623-imgsys",
 			     "mediatek,mt2701-imgsys",
-- 
1.9.1

[PATCH v2 09/10] arm: dts: mt7623: enable bananapi-r2 display function

[Ryder Lee]

This patch adds missing MIPI pin macros in mt7623-pinfunc.h and
enables pwm backlight support for bananapi-r2.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 41 +++++++++++++++++++++++++--
 include/dt-bindings/pinctrl/mt7623-pinfunc.h  | 12 ++++++++
 2 files changed, 51 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 688a863..267a05a 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -17,6 +17,17 @@
 		serial2 = &uart2;
 	};
 
+	backlight_lcd: backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&bls 0 100000>;
+		brightness-levels = <
+			  0  16  32  48  64  80  96 112
+			128 144 160 176 192 208 224 240
+			255
+		>;
+		default-brightness-level = <9>;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -86,6 +97,12 @@
 	};
 };
 
+&bls {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&bls_pins_a>;
+};
+
 &cir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cir_pins_a>;
@@ -210,6 +227,12 @@
 };
 
 &pio {
+	bls_pins_a: bls at 0 {
+		pins_cmd_dat {
+			pinmux = <MT7623_PIN_203_PWM0_FUNC_DISP_PWM>;
+		};
+	};
+
 	cir_pins_a:cir at 0 {
 		pins_cir {
 			pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
@@ -273,6 +296,21 @@
 		};
 	};
 
+	mipi_dsi_pin: mipi_dsi_pin {
+		pins_cmd_dat {
+			pinmux = <MT7623_PIN_100_MIPI_TDP0_FUNC_TDP0>,
+				 <MT7623_PIN_99_MIPI_TDN0_FUNC_TDN0>,
+				 <MT7623_PIN_98_MIPI_TDP1_FUNC_TDP1>,
+				 <MT7623_PIN_97_MIPI_TDN1_FUNC_TDN1>,
+				 <MT7623_PIN_96_MIPI_TCP_FUNC_TCP>,
+				 <MT7623_PIN_95_MIPI_TCN_FUNC_TCN>,
+				 <MT7623_PIN_94_MIPI_TDP2_FUNC_TDP2>,
+				 <MT7623_PIN_93_MIPI_TDN2_FUNC_TDN2>,
+				 <MT7623_PIN_92_MIPI_TDP3_FUNC_TDP3>,
+				 <MT7623_PIN_91_MIPI_TDN3_FUNC_TDN3>;
+		};
+	};
+
 	mmc0_pins_default: mmc0default {
 		pins_cmd_dat {
 			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
@@ -378,8 +416,7 @@
 
 	pwm_pins_a: pwm at 0 {
 		pins_pwm {
-			pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
-				 <MT7623_PIN_204_PWM1_FUNC_PWM1>,
+			pinmux = <MT7623_PIN_204_PWM1_FUNC_PWM1>,
 				 <MT7623_PIN_205_PWM2_FUNC_PWM2>,
 				 <MT7623_PIN_206_PWM3_FUNC_PWM3>,
 				 <MT7623_PIN_207_PWM4_FUNC_PWM4>;
diff --git a/include/dt-bindings/pinctrl/mt7623-pinfunc.h b/include/dt-bindings/pinctrl/mt7623-pinfunc.h
index 436a87b..72bed67 100644
--- a/include/dt-bindings/pinctrl/mt7623-pinfunc.h
+++ b/include/dt-bindings/pinctrl/mt7623-pinfunc.h
@@ -272,6 +272,18 @@
 #define MT7623_PIN_84_DSI_TE_FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
 #define MT7623_PIN_84_DSI_TE_FUNC_DSI_TE (MTK_PIN_NO(84) | 1)
 
+#define MT7623_PIN_91_MIPI_TDN3_FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define MT7623_PIN_91_MIPI_TDN3_FUNC_TDN3 (MTK_PIN_NO(91) | 1)
+
+#define MT7623_PIN_92_MIPI_TDP3_FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define MT7623_PIN_92_MIPI_TDP3_FUNC_TDP3 (MTK_PIN_NO(92) | 1)
+
+#define MT7623_PIN_93_MIPI_TDN2_FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define MT7623_PIN_93_MIPI_TDN2_FUNC_TDN2 (MTK_PIN_NO(93) | 1)
+
+#define MT7623_PIN_94_MIPI_TDP2_FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define MT7623_PIN_94_MIPI_TDP2_FUNC_TDP2 (MTK_PIN_NO(94) | 1)
+
 #define MT7623_PIN_95_MIPI_TCN_FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
 #define MT7623_PIN_95_MIPI_TCN_FUNC_TCN (MTK_PIN_NO(95) | 1)
 
-- 
1.9.1

[PATCH v2 10/10] arm: dts: mt7623: add PCIe related nodes

[Ryder Lee]

This patch adds devices nodes and updates pinmux setting for the PICe
function block. Just note that PCIe port2 PHY is shared with U3 port.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi                 | 108 ++++++++++++++++++++++++++
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts |  30 +++++++
 2 files changed, 138 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 043bae6..1895107 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -862,6 +862,114 @@
 		#reset-cells = <1>;
 	};
 
+	pcie: pcie-controller at 1a140000 {
+		compatible = "mediatek,mt7623-pcie";
+		device_type = "pci";
+		reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
+		      <0 0x1a142000 0 0x1000>, /* Port0 registers */
+		      <0 0x1a143000 0 0x1000>, /* Port1 registers */
+		      <0 0x1a144000 0 0x1000>; /* Port2 registers */
+		reg-names = "subsys", "port0", "port1", "port2";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xf800 0 0 0>;
+		interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+				<0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+				<0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&hifsys CLK_HIFSYS_PCIE0>,
+			 <&hifsys CLK_HIFSYS_PCIE1>,
+			 <&hifsys CLK_HIFSYS_PCIE2>;
+		clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+		resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+		reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+		phys = <&pcie0_port PHY_TYPE_PCIE>,
+		       <&pcie1_port PHY_TYPE_PCIE>,
+		       <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		bus-range = <0x00 0xff>;
+		status = "disabled";
+		ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000
+			  0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;
+
+		pcie at 0,0 {
+			device_type = "pci";
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			num-lanes = <1>;
+			status = "disabled";
+		};
+
+		pcie at 1,0 {
+			device_type = "pci";
+			reg = <0x0800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			num-lanes = <1>;
+			status = "disabled";
+		};
+
+		pcie at 2,0 {
+			device_type = "pci";
+			reg = <0x1000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			num-lanes = <1>;
+			status = "disabled";
+		};
+	};
+
+	pcie0_phy: pcie-phy at 1a149000 {
+		compatible = "mediatek,generic-tphy-v1";
+		reg = <0 0x1a149000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		pcie0_port: pcie-phy at 1a149900 {
+			reg = <0 0x1a149900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	pcie1_phy: pcie-phy at 1a14a000 {
+		compatible = "mediatek,generic-tphy-v1";
+		reg = <0 0x1a14a000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		pcie1_port: pcie-phy at 1a14a900 {
+			reg = <0 0x1a14a900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
 	usb1: usb at 1a1c0000 {
 		compatible = "mediatek,mt7623-xhci",
 			     "mediatek,mt8173-xhci";
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 267a05a..134a39a 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -226,6 +226,28 @@
 	vqmmc-supply = <&mt6323_vio18_reg>;
 };
 
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie at 0,0 {
+		status = "okay";
+	};
+
+	pcie at 1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
 &pio {
 	bls_pins_a: bls at 0 {
 		pins_cmd_dat {
@@ -414,6 +436,14 @@
 		};
 	};
 
+	pcie_default: pcie_pin_default {
+		pins_cmd_dat {
+			pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
+				 <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
+			bias-disable;
+		};
+	};
+
 	pwm_pins_a: pwm at 0 {
 		pins_pwm {
 			pinmux = <MT7623_PIN_204_PWM1_FUNC_PWM1>,
-- 
1.9.1