[PATCH 01/42] ARM: dts: gr-peach: Fix 'leds' node name indent

[PATCH 01/42] ARM: dts: gr-peach: Fix 'leds' node name indent

[Simon Horman]

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

Fix 'leds' node name indent as it was wrongly aligned.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100-gr-peach.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
index 13d745bb56a5..a1c5e8823d2b 100644
--- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
@@ -53,7 +53,7 @@
 		};
 	};
 
-leds {
+	leds {
 		status = "okay";
 		compatible = "gpio-leds";
 
-- 
2.11.0

[PATCH 02/42] ARM: dts: gr-peach: Enable MTU2 timer pulse unit

[Simon Horman]

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

MTU2 multi-function/multi-channel timer/counter is not enabled for
GR-Peach board. The timer is used as clock event source to schedule
wake-ups, and without this enabled all sleeps not performed through busy
waiting hang the board.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100-gr-peach.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
index a1c5e8823d2b..9661d43f5236 100644
--- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
@@ -78,6 +78,10 @@
 	clock-frequency = <48000000>;
 };
 
+&mtu2 {
+	status = "okay";
+};
+
 &scif2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&scif2_pins>;
-- 
2.11.0

[PATCH 03/42] ARM: dts: r8a7790: Use generic node name for VSP1 nodes

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Use the preferred generic node name instead of the specific name.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 081cf5cdb13b..17a48199b7a9 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1014,7 +1014,7 @@
 		status = "disabled";
 	};
 
-	vsp1 at fe920000 {
+	vsp at fe920000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe920000 0 0x8000>;
 		interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
@@ -1023,7 +1023,7 @@
 		resets = <&cpg 130>;
 	};
 
-	vsp1 at fe928000 {
+	vsp at fe928000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe928000 0 0x8000>;
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
@@ -1032,7 +1032,7 @@
 		resets = <&cpg 131>;
 	};
 
-	vsp1 at fe930000 {
+	vsp at fe930000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe930000 0 0x8000>;
 		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
@@ -1041,7 +1041,7 @@
 		resets = <&cpg 128>;
 	};
 
-	vsp1 at fe938000 {
+	vsp at fe938000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe938000 0 0x8000>;
 		interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.11.0

[PATCH 04/42] ARM: dts: r8a7791: Use generic node name for VSP1 nodes

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Use the preferred generic node name instead of the specific name.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 5a8a15847076..97bed8253bc3 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1073,7 +1073,7 @@
 		status = "disabled";
 	};
 
-	vsp1 at fe928000 {
+	vsp at fe928000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe928000 0 0x8000>;
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
@@ -1082,7 +1082,7 @@
 		resets = <&cpg 131>;
 	};
 
-	vsp1 at fe930000 {
+	vsp at fe930000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe930000 0 0x8000>;
 		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
@@ -1091,7 +1091,7 @@
 		resets = <&cpg 128>;
 	};
 
-	vsp1 at fe938000 {
+	vsp at fe938000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe938000 0 0x8000>;
 		interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.11.0

[PATCH 05/42] ARM: dts: r8a7792: Use generic node name for VSP1 nodes

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Use the preferred generic node name instead of the specific name.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7792.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index c332f77ebb6b..549eafe8ff12 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -794,7 +794,7 @@
 			status = "disabled";
 		};
 
-		vsp1 at fe928000 {
+		vsp at fe928000 {
 			compatible = "renesas,vsp1";
 			reg = <0 0xfe928000 0 0x8000>;
 			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
@@ -803,7 +803,7 @@
 			resets = <&cpg 131>;
 		};
 
-		vsp1 at fe930000 {
+		vsp at fe930000 {
 			compatible = "renesas,vsp1";
 			reg = <0 0xfe930000 0 0x8000>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
@@ -812,7 +812,7 @@
 			resets = <&cpg 128>;
 		};
 
-		vsp1 at fe938000 {
+		vsp at fe938000 {
 			compatible = "renesas,vsp1";
 			reg = <0 0xfe938000 0 0x8000>;
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.11.0

[PATCH 06/42] ARM: dts: r8a7794: Use generic node name for VSP1 nodes

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Use the preferred generic node name instead of the specific name.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 035c33715b65..19cff0dd90cf 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -970,7 +970,7 @@
 		};
 	};
 
-	vsp1 at fe928000 {
+	vsp at fe928000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe928000 0 0x8000>;
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
@@ -979,7 +979,7 @@
 		resets = <&cpg 131>;
 	};
 
-	vsp1 at fe930000 {
+	vsp at fe930000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe930000 0 0x8000>;
 		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.11.0

[PATCH 07/42] ARM: dts: iwg20d-q7: Rework DT architecture

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Since the same carrier board may host RZ/G1M and RZ/G1N based
Systems on Module, the DT architecture for iwg20d-q7 needs
better decoupling. This patch provides:
* iwg20d-q7-common.dtsi - its purpose is to define the carrier
  board definitions, and its content is basically the same
  as the previous version of r8a7743-iwg20d-q7.dts, only it
  has no reference to the SoM .dtsi, and that's why the
  filename doesn't mention the SoC name any more.
* r8a7743-iwg20d-q7.dts - its new purpose is to put together
  the SoM .dtsi (r8a7743-iwg20m.dtsi) and the carrier board
  .dtsi defined by this very patch, along with "model" and
  "compatible" properties.
The final DT architecture to describe the board is now:
r8a7743-iwg20d-q7.dts           # Carrier Board + SoM
??? r8a7743-iwg20m.dtsi         # SoM
??? ??? r8a7743.dtsi            # SoC
??? iwg20d-q7-common.dtsi       # Carrier Board
and maximizes the reuse of the definitions for the carrier board
and for the SoM.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/iwg20d-q7-common.dtsi | 147 ++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 139 +-----------------------------
 2 files changed, 149 insertions(+), 137 deletions(-)
 create mode 100644 arch/arm/boot/dts/iwg20d-q7-common.dtsi

diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
new file mode 100644
index 000000000000..1c072c0a4888
--- /dev/null
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -0,0 +1,147 @@
+/*
+ * Device Tree Source for the iWave-RZ/G1M/G1N Qseven carrier board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	aliases {
+		serial0 = &scif0;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy3>;
+	phy-mode = "gmii";
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy3: ethernet-phy at 3 {
+		reg = <3>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rtc at 68 {
+		compatible = "ti,bq32000";
+		reg = <0x68>;
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&pfc {
+	avb_pins: avb {
+		groups = "avb_mdio", "avb_gmii";
+		function = "avb";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data_d";
+		function = "scif0";
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
index 0136864bc595..6aa6b7467704 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
@@ -1,5 +1,5 @@
 /*
- * Device Tree Source for the iWave-RZG1M Qseven carrier board
+ * Device Tree Source for the iWave-RZ/G1M Qseven board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  *
@@ -10,144 +10,9 @@
 
 /dts-v1/;
 #include "r8a7743-iwg20m.dtsi"
+#include "iwg20d-q7-common.dtsi"
 
 / {
 	model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M";
 	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
-
-	aliases {
-		serial0 = &scif0;
-		ethernet0 = &avb;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = "serial0:115200n8";
-	};
-
-	vcc_sdhi1: regulator-vcc-sdhi1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI1 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio1 16 GPIO_ACTIVE_LOW>;
-	};
-
-	vccq_sdhi1: regulator-vccq-sdhi1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI1 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-};
-
-&pfc {
-	i2c2_pins: i2c2 {
-		groups = "i2c2";
-		function = "i2c2";
-	};
-
-	scif0_pins: scif0 {
-		groups = "scif0_data_d";
-		function = "scif0";
-	};
-
-	avb_pins: avb {
-		groups = "avb_mdio", "avb_gmii";
-		function = "avb";
-	};
-
-	sdhi1_pins: sd1 {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <3300>;
-	};
-
-	sdhi1_pins_uhs: sd1_uhs {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <1800>;
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		groups = "usb1";
-		function = "usb1";
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&avb {
-	pinctrl-0 = <&avb_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy3>;
-	phy-mode = "gmii";
-	renesas,no-ether-link;
-	status = "okay";
-
-	phy3: ethernet-phy at 3 {
-		reg = <3>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&sdhi1 {
-	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-1 = <&sdhi1_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi1>;
-	vqmmc-supply = <&vccq_sdhi1>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-	sd-uhs-sdr50;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	rtc at 68 {
-		compatible = "ti,bq32000";
-		reg = <0x68>;
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&usbphy {
-	status = "okay";
 };
-- 
2.11.0

[PATCH 08/42] ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

This patch adds a .dtsi that describes the camera daughter board
and a .dts to describe the HW made of iWave's RZ/G1M SoM, iWave's
RZ/G1M/G1N Qseven carrier board, and the camera daughter board.
The camera daughter board .dtsi adds support for ttySC[14].

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/Makefile                      |  1 +
 arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi        | 43 +++++++++++++++++++++++++
 arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts | 19 +++++++++++
 3 files changed, 63 insertions(+)
 create mode 100644 arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
 create mode 100644 arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e87f311ee9f2..8c34d06cfda0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -724,6 +724,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
 	r8a73a4-ape6evm.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7743-iwg20d-q7.dtb \
+	r8a7743-iwg20d-q7-dbcm-ca.dtb \
 	r8a7743-sk-rzg1m.dtb \
 	r8a7745-iwg22d-sodimm.dtb \
 	r8a7745-sk-rzg1e.dtb \
diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
new file mode 100644
index 000000000000..31fab5f183a9
--- /dev/null
+++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
@@ -0,0 +1,43 @@
+/*
+ * Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	aliases {
+		serial1 = &scif1;
+		serial4 = &hscif1;
+	};
+};
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&pfc {
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_c", "hscif1_ctrl_c";
+		function = "hscif1";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data_d";
+		function = "scif1";
+	};
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
new file mode 100644
index 000000000000..d90eb8464222
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
@@ -0,0 +1,19 @@
+/*
+ * Device Tree Source for the iWave-RZ/G1M Qseven board + camera daughter board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7743-iwg20m.dtsi"
+#include "iwg20d-q7-common.dtsi"
+#include "iwg20d-q7-dbcm-ca.dtsi"
+
+/ {
+	model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board";
+	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
+};
-- 
2.11.0

[PATCH 09/42] ARM: dts: r8a7790: add cpu capacity-dmips-mhz information

[Simon Horman]

From: Dietmar Eggemann <dietmar.eggemann@arm.com>

The following 'capacity-dmips-mhz' dt property values are used:

Cortex-A15: 1024, Cortex-A7: 539

They have been derived form the cpu_efficiency values:

Cortex-A15: 3891, Cortex-A7: 2048

by scaling them so that the Cortex-A15s (big cores) use 1024.

The cpu_efficiency values were originally derived from the "Big.LITTLE
Processing with ARM Cortex?-A15 & Cortex-A7" white paper
(http://www.cl.cam.ac.uk/~rdm34/big.LITTLE.pdf). Table 1 lists 1.9x
(3891/2048) as the Cortex-A15 vs Cortex-A7 performance ratio for the
Dhrystone benchmark.

The following platform is affected once cpu-invariant accounting
support is re-connected to the task scheduler:

r8a7790-lager

Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 17a48199b7a9..92b7f3bd8b69 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -56,6 +56,7 @@
 			clock-latency = <300000>; /* 300 us */
 			power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
 			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
 
 			/* kHz - uV - OPPs unknown yet */
 			operating-points = <1400000 1000000>,
@@ -73,6 +74,7 @@
 			clock-frequency = <1300000000>;
 			power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
 			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		cpu2: cpu at 2 {
@@ -82,6 +84,7 @@
 			clock-frequency = <1300000000>;
 			power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
 			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		cpu3: cpu at 3 {
@@ -91,6 +94,7 @@
 			clock-frequency = <1300000000>;
 			power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
 			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		cpu4: cpu at 100 {
@@ -100,6 +104,7 @@
 			clock-frequency = <780000000>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU0>;
 			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
 		};
 
 		cpu5: cpu at 101 {
@@ -109,6 +114,7 @@
 			clock-frequency = <780000000>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU1>;
 			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
 		};
 
 		cpu6: cpu at 102 {
@@ -118,6 +124,7 @@
 			clock-frequency = <780000000>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU2>;
 			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
 		};
 
 		cpu7: cpu at 103 {
@@ -127,6 +134,7 @@
 			clock-frequency = <780000000>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
 			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
 		};
 
 		L2_CA15: cache-controller-0 {
-- 
2.11.0

[PATCH 10/42] ARM: dts: r8a7745: Add internal PCI bridge nodes

[Simon Horman]

From: Biju Das <biju.das@bp.renesas.com>

Add device nodes for the r8a7745 internal PCI bridge devices.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7745.dtsi | 46 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 6ba3b8b04edb..b4e9536a84d6 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -845,6 +845,52 @@
 			resets = <&cpg 311>;
 			status = "disabled";
 		};
+
+		pci0: pci at ee090000 {
+			compatible = "renesas,pci-r8a7745",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee090000 0 0xc00>,
+			      <0 0xee080000 0 0x1100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+			interrupt-map-mask = <0xff00 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pci1: pci at ee0d0000 {
+			compatible = "renesas,pci-r8a7745",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee0d0000 0 0xc00>,
+			      <0 0xee0c0000 0 0x1100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <1 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+			interrupt-map-mask = <0xff00 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	/* External root clock */
-- 
2.11.0

[PATCH 11/42] ARM: dts: r8a7745: Add USB PHY DT support

[Simon Horman]

From: Biju Das <biju.das@bp.renesas.com>

Define the r8a7745 generic part of the USB PHY device node.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7745.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index b4e9536a84d6..17cfa53f3c76 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -891,6 +891,28 @@
 					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
 					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		usbphy: usb-phy at e6590100 {
+			compatible = "renesas,usb-phy-r8a7745",
+				     "renesas,rcar-gen2-usb-phy";
+			reg = <0 0xe6590100 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 704>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+
+			usb0: usb-channel at 0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+			usb2: usb-channel at 2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+		};
 	};
 
 	/* External root clock */
-- 
2.11.0

[PATCH 12/42] ARM: dts: r8a7745: Link PCI USB devices to USB PHY

[Simon Horman]

From: Biju Das <biju.das@bp.renesas.com>

Describe the PCI USB devices that are behind the PCI bridges, adding
necessary links to the USB PHY device.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7745.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 17cfa53f3c76..3a50f703601c 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -867,6 +867,18 @@
 			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
 					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
 					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb at 1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+
+			usb at 2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
 		};
 
 		pci1: pci at ee0d0000 {
@@ -890,6 +902,18 @@
 			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
 					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
 					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb at 1,0 {
+				reg = <0x10800 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+
+			usb at 2,0 {
+				reg = <0x11000 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
 		};
 
 		usbphy: usb-phy at e6590100 {
-- 
2.11.0

[PATCH 13/42] ARM: dts: iwg22d-sodimm: Enable internal PCI

[Simon Horman]

From: Biju Das <biju.das@bp.renesas.com>

Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers
attached to them.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index 8772c561e3a8..e378e5ecfcac 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -55,6 +55,11 @@
 		function = "sdhi0";
 		power-source = <3300>;
 	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
 };
 
 &scif4 {
@@ -92,3 +97,9 @@
 	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
-- 
2.11.0

[PATCH 14/42] ARM: dts: iwg22d-sodimm: Enable USB PHY

[Simon Horman]

From: Biju Das <biju.das@bp.renesas.com>

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index e378e5ecfcac..52153ec3638c 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -103,3 +103,7 @@
 	pinctrl-0 = <&usb1_pins>;
 	pinctrl-names = "default";
 };
+
+&usbphy {
+	status = "okay";
+};
-- 
2.11.0

[PATCH 15/42] ARM: dts: r8a7743: Add HS-USB device node

[Simon Horman]

From: Biju Das <biju.das@bp.renesas.com>

Define the R8A7743 generic part of the HS-USB device node. It is up to the
board file to enable the device.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7743.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index d541fd9ffafb..080eff9bb3c3 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -945,6 +945,20 @@
 			status = "disabled";
 		};
 
+		hsusb: usb at e6590000 {
+			compatible = "renesas,usbhs-r8a7743",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		usbphy: usb-phy at e6590100 {
 			compatible = "renesas,usb-phy-r8a7743",
 				     "renesas,rcar-gen2-usb-phy";
-- 
2.11.0

[PATCH 16/42] ARM: dts: iwg20d-q7: Enable HS-USB

[Simon Horman]

From: Biju Das <biju.das@bp.renesas.com>

Enable HS-USB device for the iWave G20D-Q7 carrier board based on
RZ/G1M.
Also disable the host mode support on usb otg port by default to avoid
pin conflicts.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/iwg20d-q7-common.dtsi | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 1c072c0a4888..efd8af9242d1 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -58,6 +58,12 @@
 	};
 };
 
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
 &i2c2 {
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";
@@ -72,7 +78,6 @@
 };
 
 &pci0 {
-	status = "okay";
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
 };
-- 
2.11.0

[PATCH 17/42] ARM: dts: r8a7743: Add USB-DMAC device nodes

[Simon Horman]

From: Biju Das <biju.das@bp.renesas.com>

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7743.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 080eff9bb3c3..de89295ce63a 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -355,6 +355,34 @@
 			dma-channels = <15>;
 		};
 
+		usb_dmac0: dma-controller at e65a0000 {
+			compatible = "renesas,r8a7743-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller at e65b0000 {
+			compatible = "renesas,r8a7743-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
 		/* The memory map in the User's Manual maps the cores to bus
 		 *  numbers
 		 */
-- 
2.11.0

[PATCH 18/42] ARM: dts: r8a7743: Enable DMA for HSUSB

[Simon Horman]

From: Biju Das <biju.das@bp.renesas.com>

This patch adds DMA properties to the HSUSB node.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7743.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index de89295ce63a..699c04003eac 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -979,6 +979,9 @@
 			reg = <0 0xe6590000 0 0x100>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
 			resets = <&cpg 704>;
 			renesas,buswait = <4>;
-- 
2.11.0

[PATCH 19/42] ARM: dts: gr-peach: Add ETHER pin group

[Simon Horman]

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

Add pin configuration subnode for ETHER pin group.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100-gr-peach.dts | 39 +++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
index 9661d43f5236..eca14e3801ec 100644
--- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
@@ -68,6 +68,28 @@
 		/* P6_2 as RxD2; P6_3 as TxD2 */
 		pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>;
 	};
+
+	ether_pins: ether {
+		/* Ethernet on Ports 1,3,5,10 */
+		pinmux = <RZA1_PINMUX(1, 14, 4)>, /* P1_14 = ET_COL   */
+			 <RZA1_PINMUX(3, 0, 2)>,  /* P3_0 = ET_TXCLK  */
+			 <RZA1_PINMUX(3, 3, 2)>,  /* P3_3 = ET_MDIO   */
+			 <RZA1_PINMUX(3, 4, 2)>,  /* P3_4 = ET_RXCLK  */
+			 <RZA1_PINMUX(3, 5, 2)>,  /* P3_5 = ET_RXER   */
+			 <RZA1_PINMUX(3, 6, 2)>,  /* P3_6 = ET_RXDV   */
+			 <RZA1_PINMUX(5, 9, 2)>,  /* P5_9 = ET_MDC    */
+			 <RZA1_PINMUX(10, 1, 4)>, /* P10_1 = ET_TXER  */
+			 <RZA1_PINMUX(10, 2, 4)>, /* P10_2 = ET_TXEN  */
+			 <RZA1_PINMUX(10, 3, 4)>, /* P10_3 = ET_CRS   */
+			 <RZA1_PINMUX(10, 4, 4)>, /* P10_4 = ET_TXD0  */
+			 <RZA1_PINMUX(10, 5, 4)>, /* P10_5 = ET_TXD1  */
+			 <RZA1_PINMUX(10, 6, 4)>, /* P10_6 = ET_TXD2  */
+			 <RZA1_PINMUX(10, 7, 4)>, /* P10_7 = ET_TXD3  */
+			 <RZA1_PINMUX(10, 8, 4)>, /* P10_8 = ET_RXD0  */
+			 <RZA1_PINMUX(10, 9, 4)>, /* P10_9 = ET_RXD1  */
+			 <RZA1_PINMUX(10, 10, 4)>,/* P10_10 = ET_RXD2 */
+			 <RZA1_PINMUX(10, 11, 4)>;/* P10_11 = ET_RXD3 */
+	};
 };
 
 &extal_clk {
@@ -88,3 +110,20 @@
 
 	status = "okay";
 };
+
+&ether {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ether_pins>;
+
+	status = "okay";
+
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+
+	phy0: ethernet-phy at 0 {
+		reg = <0>;
+
+		reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <5>;
+	};
+};
-- 
2.11.0

[PATCH 20/42] ARM: dts: gr-peach: Enable ostm0 and ostm1 timers

[Simon Horman]

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

Enable ostm0 and ostm1 timers to be used as clock source and clockevent
source. The timers provides greater accuracy than the already enabled
mtu2 one.

With these enabled:

clocksource: ostm: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns
sched_clock: 32 bits at 33MHz, resolution 30ns, wraps every 64440619504ns
ostm: used for clocksource
ostm: used for clock events

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Suggested-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100-gr-peach.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
index eca14e3801ec..779f724b4531 100644
--- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
@@ -104,6 +104,14 @@
 	status = "okay";
 };
 
+&ostm0 {
+	status = "okay";
+};
+
+&ostm1 {
+	status = "okay";
+};
+
 &scif2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&scif2_pins>;
-- 
2.11.0

[PATCH 21/42] ARM: dts: r8a7778: Use R-Car GPIO Gen1 fallback compat string

[Simon Horman]

Use newly added R-Car GPIO Gen1 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in DT of r8a7778 SoC.

As the driver does not match on "renesas,gpio-r8a7778" there
are some run-time considerations for this patch:

* When a resulting DTB is used with kernels newer than v4.14 this should
  not have any run-time effect as renesas,rcar-gen1-gpio is matched by the
  driver since commit dbd1dad2ab8f ("gpio: rcar: add gen[123] fallback
  compatibility strings")

* However, when used with older kernels GPIO will be disabled as
  no compat string match will be made by the driver.

The regression documented above for the new DTB with old kernel case
is acceptable in my opinion.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7778.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 8f3156c0e575..a31817b2dda7 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -88,7 +88,7 @@
 	};
 
 	gpio0: gpio at ffc40000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
 		reg = <0xffc40000 0x2c>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -99,7 +99,7 @@
 	};
 
 	gpio1: gpio at ffc41000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
 		reg = <0xffc41000 0x2c>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -110,7 +110,7 @@
 	};
 
 	gpio2: gpio at ffc42000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
 		reg = <0xffc42000 0x2c>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -121,7 +121,7 @@
 	};
 
 	gpio3: gpio at ffc43000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
 		reg = <0xffc43000 0x2c>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -132,7 +132,7 @@
 	};
 
 	gpio4: gpio at ffc44000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
 		reg = <0xffc44000 0x2c>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
-- 
2.11.0

[PATCH 22/42] ARM: dts: r8a7779: Use R-Car GPIO Gen1 fallback compat string

[Simon Horman]

Use newly added R-Car GPIO Gen1 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in DT of r8a7779 SoC.

As the driver does not match on "renesas,gpio-r8a7779" there
are some run-time considerations for this patch:

* When a resulting DTB is used with kernels newer than v4.14 this should
  not have any run-time effect as renesas,rcar-gen1-gpio is matched by the
  driver since commit dbd1dad2ab8f ("gpio: rcar: add gen[123] fallback
  compatibility strings")

* However, when used with older kernels GPIO will be disabled as
  no compat string match will be made by the driver.

The regression documented above for the new DTB with old kernel case
is acceptable in my opinion.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7779.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 8ee0b2ca5d39..ccef2cfab6e0 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -76,7 +76,7 @@
 	};
 
 	gpio0: gpio at ffc40000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
 		reg = <0xffc40000 0x2c>;
 		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -87,7 +87,7 @@
 	};
 
 	gpio1: gpio at ffc41000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
 		reg = <0xffc41000 0x2c>;
 		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -98,7 +98,7 @@
 	};
 
 	gpio2: gpio at ffc42000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
 		reg = <0xffc42000 0x2c>;
 		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -109,7 +109,7 @@
 	};
 
 	gpio3: gpio at ffc43000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
 		reg = <0xffc43000 0x2c>;
 		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -120,7 +120,7 @@
 	};
 
 	gpio4: gpio at ffc44000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
 		reg = <0xffc44000 0x2c>;
 		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -131,7 +131,7 @@
 	};
 
 	gpio5: gpio at ffc45000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
 		reg = <0xffc45000 0x2c>;
 		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -142,7 +142,7 @@
 	};
 
 	gpio6: gpio at ffc46000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
 		reg = <0xffc46000 0x2c>;
 		interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
-- 
2.11.0

[PATCH 23/42] ARM: dts: r8a7743: Use R-Car GPIO Gen2 fallback compat string

[Simon Horman]

Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7743 SoC.

This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7743.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 699c04003eac..f29f15d4d659 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -108,7 +108,7 @@
 
 		gpio0: gpio at e6050000 {
 			compatible = "renesas,gpio-r8a7743",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6050000 0 0x50>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -123,7 +123,7 @@
 
 		gpio1: gpio at e6051000 {
 			compatible = "renesas,gpio-r8a7743",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6051000 0 0x50>;
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -138,7 +138,7 @@
 
 		gpio2: gpio at e6052000 {
 			compatible = "renesas,gpio-r8a7743",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6052000 0 0x50>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -153,7 +153,7 @@
 
 		gpio3: gpio at e6053000 {
 			compatible = "renesas,gpio-r8a7743",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6053000 0 0x50>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -168,7 +168,7 @@
 
 		gpio4: gpio at e6054000 {
 			compatible = "renesas,gpio-r8a7743",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6054000 0 0x50>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -183,7 +183,7 @@
 
 		gpio5: gpio at e6055000 {
 			compatible = "renesas,gpio-r8a7743",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6055000 0 0x50>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -198,7 +198,7 @@
 
 		gpio6: gpio at e6055400 {
 			compatible = "renesas,gpio-r8a7743",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6055400 0 0x50>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -213,7 +213,7 @@
 
 		gpio7: gpio at e6055800 {
 			compatible = "renesas,gpio-r8a7743",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6055800 0 0x50>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
-- 
2.11.0

[PATCH 24/42] ARM: dts: r8a7790: Use R-Car GPIO Gen2 fallback compat string

[Simon Horman]

Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7790 SoC.

This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7790.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 92b7f3bd8b69..f247beb3863f 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -200,7 +200,7 @@
 	};
 
 	gpio0: gpio at e6050000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6050000 0 0x50>;
 		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -214,7 +214,7 @@
 	};
 
 	gpio1: gpio at e6051000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6051000 0 0x50>;
 		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -228,7 +228,7 @@
 	};
 
 	gpio2: gpio at e6052000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6052000 0 0x50>;
 		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -242,7 +242,7 @@
 	};
 
 	gpio3: gpio at e6053000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6053000 0 0x50>;
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -256,7 +256,7 @@
 	};
 
 	gpio4: gpio at e6054000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6054000 0 0x50>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -270,7 +270,7 @@
 	};
 
 	gpio5: gpio at e6055000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6055000 0 0x50>;
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
-- 
2.11.0

[PATCH 25/42] ARM: dts: r8a7791: Use R-Car GPIO Gen2 fallback compat string

[Simon Horman]

Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7791 SoC.

This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7791.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 97bed8253bc3..3c7b919efa48 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -124,7 +124,7 @@
 	};
 
 	gpio0: gpio at e6050000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6050000 0 0x50>;
 		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -138,7 +138,7 @@
 	};
 
 	gpio1: gpio at e6051000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6051000 0 0x50>;
 		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -152,7 +152,7 @@
 	};
 
 	gpio2: gpio at e6052000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6052000 0 0x50>;
 		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -166,7 +166,7 @@
 	};
 
 	gpio3: gpio at e6053000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6053000 0 0x50>;
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -180,7 +180,7 @@
 	};
 
 	gpio4: gpio at e6054000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6054000 0 0x50>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -194,7 +194,7 @@
 	};
 
 	gpio5: gpio at e6055000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6055000 0 0x50>;
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -208,7 +208,7 @@
 	};
 
 	gpio6: gpio at e6055400 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6055400 0 0x50>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -222,7 +222,7 @@
 	};
 
 	gpio7: gpio at e6055800 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6055800 0 0x50>;
 		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
-- 
2.11.0

[PATCH 26/42] ARM: dts: r8a7792: Use R-Car GPIO Gen2 fallback compat string

[Simon Horman]

Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7792 SoC.

This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7792.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 549eafe8ff12..56570d1ce5f6 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -147,7 +147,7 @@
 
 		gpio0: gpio at e6050000 {
 			compatible = "renesas,gpio-r8a7792",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6050000 0 0x50>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -162,7 +162,7 @@
 
 		gpio1: gpio at e6051000 {
 			compatible = "renesas,gpio-r8a7792",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6051000 0 0x50>;
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -177,7 +177,7 @@
 
 		gpio2: gpio at e6052000 {
 			compatible = "renesas,gpio-r8a7792",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6052000 0 0x50>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -192,7 +192,7 @@
 
 		gpio3: gpio at e6053000 {
 			compatible = "renesas,gpio-r8a7792",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6053000 0 0x50>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -207,7 +207,7 @@
 
 		gpio4: gpio at e6054000 {
 			compatible = "renesas,gpio-r8a7792",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6054000 0 0x50>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -222,7 +222,7 @@
 
 		gpio5: gpio at e6055000 {
 			compatible = "renesas,gpio-r8a7792",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6055000 0 0x50>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -237,7 +237,7 @@
 
 		gpio6: gpio at e6055100 {
 			compatible = "renesas,gpio-r8a7792",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6055100 0 0x50>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -252,7 +252,7 @@
 
 		gpio7: gpio at e6055200 {
 			compatible = "renesas,gpio-r8a7792",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6055200 0 0x50>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -267,7 +267,7 @@
 
 		gpio8: gpio at e6055300 {
 			compatible = "renesas,gpio-r8a7792",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6055300 0 0x50>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -282,7 +282,7 @@
 
 		gpio9: gpio at e6055400 {
 			compatible = "renesas,gpio-r8a7792",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6055400 0 0x50>;
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -297,7 +297,7 @@
 
 		gpio10: gpio at e6055500 {
 			compatible = "renesas,gpio-r8a7792",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6055500 0 0x50>;
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -312,7 +312,7 @@
 
 		gpio11: gpio at e6055600 {
 			compatible = "renesas,gpio-r8a7792",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen2-gpio";
 			reg = <0 0xe6055600 0 0x50>;
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
-- 
2.11.0

[PATCH 27/42] ARM: dts: r8a7793: Use R-Car GPIO Gen2 fallback compat string

[Simon Horman]

Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7793 SoC.

This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7793.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index aa19b93494bf..76418c375a10 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -115,7 +115,7 @@
 	};
 
 	gpio0: gpio at e6050000 {
-		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6050000 0 0x50>;
 		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -129,7 +129,7 @@
 	};
 
 	gpio1: gpio at e6051000 {
-		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6051000 0 0x50>;
 		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -143,7 +143,7 @@
 	};
 
 	gpio2: gpio at e6052000 {
-		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6052000 0 0x50>;
 		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -157,7 +157,7 @@
 	};
 
 	gpio3: gpio at e6053000 {
-		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6053000 0 0x50>;
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -171,7 +171,7 @@
 	};
 
 	gpio4: gpio at e6054000 {
-		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6054000 0 0x50>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -185,7 +185,7 @@
 	};
 
 	gpio5: gpio at e6055000 {
-		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6055000 0 0x50>;
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -199,7 +199,7 @@
 	};
 
 	gpio6: gpio at e6055400 {
-		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6055400 0 0x50>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -213,7 +213,7 @@
 	};
 
 	gpio7: gpio at e6055800 {
-		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6055800 0 0x50>;
 		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
-- 
2.11.0

[PATCH 28/42] ARM: dts: r8a7794: Use R-Car GPIO Gen2 fallback compat string

[Simon Horman]

Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7794 SoC.

This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7794.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 19cff0dd90cf..7720a6ca8702 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -82,7 +82,7 @@
 	};
 
 	gpio0: gpio at e6050000 {
-		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6050000 0 0x50>;
 		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -96,7 +96,7 @@
 	};
 
 	gpio1: gpio at e6051000 {
-		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6051000 0 0x50>;
 		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -110,7 +110,7 @@
 	};
 
 	gpio2: gpio at e6052000 {
-		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6052000 0 0x50>;
 		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -124,7 +124,7 @@
 	};
 
 	gpio3: gpio at e6053000 {
-		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6053000 0 0x50>;
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -138,7 +138,7 @@
 	};
 
 	gpio4: gpio at e6054000 {
-		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6054000 0 0x50>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -152,7 +152,7 @@
 	};
 
 	gpio5: gpio at e6055000 {
-		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6055000 0 0x50>;
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
@@ -166,7 +166,7 @@
 	};
 
 	gpio6: gpio at e6055400 {
-		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio";
 		reg = <0 0xe6055400 0 0x50>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
-- 
2.11.0

[PATCH 29/42] ARM: dts: r8a73a4: Add clock for CA15 CPU0 core

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Improve hardware description by adding a clocks property to the device
node corresponding to the primary CA15 CPU core, which is for now the
only one described.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a73a4.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 310222634570..dd4d09712a2a 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -27,6 +27,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+			clocks = <&cpg_clocks R8A73A4_CLK_Z>;
 			clock-frequency = <1500000000>;
 			power-domains = <&pd_a2sl>;
 			next-level-cache = <&L2_CA15>;
-- 
2.11.0

[PATCH 30/42] ARM: dts: r8a7743: Add missing clock for secondary CA15 CPU core

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Currently only the primary CPU in the CA15 cluster has a clocks
property, while the secondary CPU core is driven by the same clock.
Add the missing clocks property to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7743.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index f29f15d4d659..4db4f61be25a 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -63,6 +63,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
 			power-domains = <&sysc R8A7743_PD_CA15_CPU1>;
 			next-level-cache = <&L2_CA15>;
 		};
-- 
2.11.0

[PATCH 31/42] ARM: dts: r8a7778: Add clock for CA9 CPU core

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Improve hardware description by adding a clock property to the device
node corresponding to the CA9 CPU core.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7778.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index a31817b2dda7..a39472aab867 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -33,6 +33,7 @@
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			clock-frequency = <800000000>;
+			clocks = <&z_clk>;
 		};
 	};
 
-- 
2.11.0

[PATCH 32/42] ARM: dts: r8a7779: Add clocks for CA9 CPU cores

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Improve hardware description by adding clocks properties to the device
nodes corresponding to the CA9 CPU cores.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7779.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index ccef2cfab6e0..e8eb94748b27 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -29,12 +29,14 @@
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			clock-frequency = <1000000000>;
+			clocks = <&cpg_clocks R8A7779_CLK_Z>;
 		};
 		cpu at 1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 			clock-frequency = <1000000000>;
+			clocks = <&cpg_clocks R8A7779_CLK_Z>;
 			power-domains = <&sysc R8A7779_PD_ARM1>;
 		};
 		cpu at 2 {
@@ -42,6 +44,7 @@
 			compatible = "arm,cortex-a9";
 			reg = <2>;
 			clock-frequency = <1000000000>;
+			clocks = <&cpg_clocks R8A7779_CLK_Z>;
 			power-domains = <&sysc R8A7779_PD_ARM2>;
 		};
 		cpu at 3 {
@@ -49,6 +52,7 @@
 			compatible = "arm,cortex-a9";
 			reg = <3>;
 			clock-frequency = <1000000000>;
+			clocks = <&cpg_clocks R8A7779_CLK_Z>;
 			power-domains = <&sysc R8A7779_PD_ARM3>;
 		};
 	};
-- 
2.11.0

[PATCH 33/42] ARM: dts: r8a7790: Add missing clocks for secondary CA15 CPU cores

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Currently only the primary CPU in the CA15 cluster has a clocks
property, while the secondary CPU cores are driven by the same clock.
Add the missing clocks properties to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index f247beb3863f..e85eb42f97e8 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -72,6 +72,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 			clock-frequency = <1300000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
 			power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
@@ -82,6 +83,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <2>;
 			clock-frequency = <1300000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
 			power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
@@ -92,6 +94,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <3>;
 			clock-frequency = <1300000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
 			power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
-- 
2.11.0

[PATCH 34/42] ARM: dts: r8a7790: Add clocks for CA7 CPU cores

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Currently only the CPU cores in the CA15 cluster have clocks properties.
Add the missing clocks properties for the CPU cores in the CA7 cluster
to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index e85eb42f97e8..2f017fee4009 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -105,6 +105,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
 			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU0>;
 			next-level-cache = <&L2_CA7>;
 			capacity-dmips-mhz = <539>;
@@ -115,6 +116,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
 			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU1>;
 			next-level-cache = <&L2_CA7>;
 			capacity-dmips-mhz = <539>;
@@ -125,6 +127,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
 			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU2>;
 			next-level-cache = <&L2_CA7>;
 			capacity-dmips-mhz = <539>;
@@ -135,6 +138,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x103>;
 			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
 			next-level-cache = <&L2_CA7>;
 			capacity-dmips-mhz = <539>;
-- 
2.11.0

[PATCH 35/42] ARM: dts: r8a7791: Add missing clock for secondary CA15 CPU core

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Currently only the primary CPU in the CA15 cluster has a clocks
property, while the secondary CPU core is driven by the same clock.
Add the missing clocks property to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 3c7b919efa48..67831d0405f3 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -70,6 +70,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
 			power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
 			next-level-cache = <&L2_CA15>;
 		};
-- 
2.11.0

[PATCH 36/42] ARM: dts: r8a7792: Add missing clock for secondary CA15 CPU core

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Currently only the primary CPU in the CA15 cluster has a clocks
property, while the secondary CPU core is driven by the same clock.
Add the missing clocks property to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7792.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 56570d1ce5f6..131f65b0426e 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -56,6 +56,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
 			power-domains = <&sysc R8A7792_PD_CA15_CPU1>;
 			next-level-cache = <&L2_CA15>;
 		};
-- 
2.11.0

[GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.15

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these second round of Renesas ARM based SoC DT updates for
v4.15.

This pull request is based on the previous round of
such requests, tagged as renesas-dt-for-v4.15,
which you have already pulled.


The following changes since commit 7031a219f649d12acda8a70a4b6b816ee123c8e2:

  ARM: dts: r8a7743: Add MSIOF[012] support (2017-09-28 08:02:04 +0200)

are available in the git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt2-for-v4.15

for you to fetch changes up to b6d3b649441936621c87b79bff8dd436e2397e3c:

  ARM: dts: r8a7743: Add xhci support to SoC dtsi (2017-10-18 07:21:36 +0200)

----------------------------------------------------------------
Second Round of Renesas ARM Based SoC DT Updates for v4.15

* r8a77430 (RZ/G1M) SoC
  - Add XHCI support to SoC DT. Boards may enable this as appropriate

* All Renesas ARM based SoCs
  - Add missing clocks for ARM CPU cores

    Geert Uytterhoeven says "This series improves DT hardware descriptions
    for Renesas arm32 SoCs by adding missing clocks properties to the
    device nodes corresponding to ARM CPU cores."

* R-Car Gen 1 and 2, and RZ/G SoCs
  - Use R-Car Fallback compat strings for GPIO

    Simon Horman says "Use newly added R-Car GPIO Gen 1, 2 and 3 fallback
    compat strings in peace of now deprecated non-generation specific R-Car
    GPIO fallback compat string in the DT of Renesas ARM and arm64 based
    SoCs.

    As noted in the changelogs for the r8a777[89] changes, this introduces
    an incompatibility with pre-v4.14 kernels used with new DTBs. There is
    no run-time effect for other SoCs updated by this changeset."

* r7s72100 (RZ/A1H) GR-Peach board
  - Add pin configuration subnode for ETHER pin group.
    This avoids relying on boot-loader configuration of these pins.

  - Enable ostm0 and ostm1 timers

    Jacopo Mondi says these are "to be used as clock source and clockevent
    source. The timers provides greater accuracy than the already enabled
    mtu2 one."

  - Correct leds node name indent

  - Enable MTU2 timer pulse unit

   Jacopo Mondi says "MTU2 multi-function/multi-channel timer/counter is
   not enabled for GR-Peach board. The timer is used as clock event source
   to schedule wake-ups, and without this enabled all sleeps not performed
   through busy waiting hang the board."

* r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM
  - Add USB function support

* r8a7745 (RZ/G1E) iW-RainboW-G22D development platform
  - Add USB2.0 Host support

* r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven development platform
  - Rework DT architecture and add DT for camera DB

    Fabrizio Castro says "Some of the serial interfaces are exposed on the
    camera daughter board.  The camera daughter board can be connected to
    the carrier board by means of expansion connectors 1, 2 and 3. The
    carrier board may host an RZ/G1M or an RZ/G1N based SoM.

    While adding support for the serial interfaces on the camera daughter
    board we faced the dilemma of how to properly describe all of the
    possible HW configurations and how to maximize code reuse.

    The best option would be to use device tree overlays, however there is
    still some work to be done on that front before actually using them,
    therefore for the time being we decided to provide .dtsi files to
    describe the carrier board and the camera daughter board, and provide
    .dts files to describe the HW configurations we need to support."

* r8a779[0-4] R-Car Gen2 SoCs
  - Use generic node name for VSP1 nodes

    Geert Uytterhoeven says "This patch series replaces the specific node
    names used for the VSP1 nodes by the preferred generic node names, cfr.
    commit 0e1bfb72b076b07d ("v4l: vsp1: Use generic node name")."

----------------------------------------------------------------
Biju Das (9):
      ARM: dts: r8a7745: Add internal PCI bridge nodes
      ARM: dts: r8a7745: Add USB PHY DT support
      ARM: dts: r8a7745: Link PCI USB devices to USB PHY
      ARM: dts: iwg22d-sodimm: Enable internal PCI
      ARM: dts: iwg22d-sodimm: Enable USB PHY
      ARM: dts: r8a7743: Add HS-USB device node
      ARM: dts: iwg20d-q7: Enable HS-USB
      ARM: dts: r8a7743: Add USB-DMAC device nodes
      ARM: dts: r8a7743: Enable DMA for HSUSB

Dietmar Eggemann (1):
      ARM: dts: r8a7790: add cpu capacity-dmips-mhz information

Fabrizio Castro (3):
      ARM: dts: iwg20d-q7: Rework DT architecture
      ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB
      ARM: dts: r8a7743: Add xhci support to SoC dtsi

Geert Uytterhoeven (17):
      ARM: dts: r8a7790: Use generic node name for VSP1 nodes
      ARM: dts: r8a7791: Use generic node name for VSP1 nodes
      ARM: dts: r8a7792: Use generic node name for VSP1 nodes
      ARM: dts: r8a7794: Use generic node name for VSP1 nodes
      ARM: dts: r8a73a4: Add clock for CA15 CPU0 core
      ARM: dts: r8a7743: Add missing clock for secondary CA15 CPU core
      ARM: dts: r8a7778: Add clock for CA9 CPU core
      ARM: dts: r8a7779: Add clocks for CA9 CPU cores
      ARM: dts: r8a7790: Add missing clocks for secondary CA15 CPU cores
      ARM: dts: r8a7790: Add clocks for CA7 CPU cores
      ARM: dts: r8a7791: Add missing clock for secondary CA15 CPU core
      ARM: dts: r8a7792: Add missing clock for secondary CA15 CPU core
      ARM: dts: r8a7793: Add missing clock for secondary CA15 CPU core
      ARM: dts: r8a7794: Add missing clock for secondary CA7 CPU core
      ARM: dts: sh73a0: Add clocks for CA9 CPU cores
      dt-bindings: clk: r7s72100: Add missing I and G clocks
      ARM: dts: r7s72100: Add clock for CA9 CPU core

Jacopo Mondi (4):
      ARM: dts: gr-peach: Fix 'leds' node name indent
      ARM: dts: gr-peach: Enable MTU2 timer pulse unit
      ARM: dts: gr-peach: Add ETHER pin group
      ARM: dts: gr-peach: Enable ostm0 and ostm1 timers

Simon Horman (8):
      ARM: dts: r8a7778: Use R-Car GPIO Gen1 fallback compat string
      ARM: dts: r8a7779: Use R-Car GPIO Gen1 fallback compat string
      ARM: dts: r8a7743: Use R-Car GPIO Gen2 fallback compat string
      ARM: dts: r8a7790: Use R-Car GPIO Gen2 fallback compat string
      ARM: dts: r8a7791: Use R-Car GPIO Gen2 fallback compat string
      ARM: dts: r8a7792: Use R-Car GPIO Gen2 fallback compat string
      ARM: dts: r8a7793: Use R-Car GPIO Gen2 fallback compat string
      ARM: dts: r8a7794: Use R-Car GPIO Gen2 fallback compat string

 arch/arm/boot/dts/Makefile                      |   1 +
 arch/arm/boot/dts/iwg20d-q7-common.dtsi         | 152 ++++++++++++++++++++++++
 arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi        |  43 +++++++
 arch/arm/boot/dts/r7s72100-gr-peach.dts         |  53 ++++++++-
 arch/arm/boot/dts/r7s72100.dtsi                 |   1 +
 arch/arm/boot/dts/r8a73a4.dtsi                  |   1 +
 arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts |  19 +++
 arch/arm/boot/dts/r8a7743-iwg20d-q7.dts         | 139 +---------------------
 arch/arm/boot/dts/r8a7743.dtsi                  |  82 +++++++++++--
 arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts     |  15 +++
 arch/arm/boot/dts/r8a7745.dtsi                  |  92 ++++++++++++++
 arch/arm/boot/dts/r8a7778.dtsi                  |  11 +-
 arch/arm/boot/dts/r8a7779.dtsi                  |  18 +--
 arch/arm/boot/dts/r8a7790.dtsi                  |  35 ++++--
 arch/arm/boot/dts/r8a7791.dtsi                  |  23 ++--
 arch/arm/boot/dts/r8a7792.dtsi                  |  31 ++---
 arch/arm/boot/dts/r8a7793.dtsi                  |  17 +--
 arch/arm/boot/dts/r8a7794.dtsi                  |  19 +--
 arch/arm/boot/dts/sh73a0.dtsi                   |   2 +
 include/dt-bindings/clock/r7s72100-clock.h      |   2 +
 20 files changed, 545 insertions(+), 211 deletions(-)
 create mode 100644 arch/arm/boot/dts/iwg20d-q7-common.dtsi
 create mode 100644 arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
 create mode 100644 arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts

[PATCH 37/42] ARM: dts: r8a7793: Add missing clock for secondary CA15 CPU core

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Currently only the primary CPU in the CA15 cluster has a clocks
property, while the secondary CPU core is driven by the same clock.
Add the missing clocks property to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7793.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 76418c375a10..58eae569b4e0 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -62,6 +62,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
 			power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
 		};
 
-- 
2.11.0

[PATCH 38/42] ARM: dts: r8a7794: Add missing clock for secondary CA7 CPU core

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Currently only the primary CPU in the CA7 cluster has a clocks property,
while the secondary CPU core is driven by the same clock.
Add the missing clocks property to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 7720a6ca8702..905e50c9b524 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -53,6 +53,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <1>;
 			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
 			power-domains = <&sysc R8A7794_PD_CA7_CPU1>;
 			next-level-cache = <&L2_CA7>;
 		};
-- 
2.11.0

[PATCH 39/42] ARM: dts: sh73a0: Add clocks for CA9 CPU cores

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Improve hardware description by adding clocks properties to the device
nodes corresponding to the CA9 CPU cores.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 4ea5c5a16c57..88d7e5631d34 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -27,6 +27,7 @@
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			clock-frequency = <1196000000>;
+			clocks = <&cpg_clocks SH73A0_CLK_Z>;
 			power-domains = <&pd_a2sl>;
 			next-level-cache = <&L2>;
 		};
@@ -35,6 +36,7 @@
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 			clock-frequency = <1196000000>;
+			clocks = <&cpg_clocks SH73A0_CLK_Z>;
 			power-domains = <&pd_a2sl>;
 			next-level-cache = <&L2>;
 		};
-- 
2.11.0

[PATCH 40/42] dt-bindings: clk: r7s72100: Add missing I and G clocks

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add the missing definitions for the I (CPU) and G (Image Processing)
clocks, so these clocks can be referred to from device nodes in DT.

Note that these clocks are already fully supported otherwise (DT
bindings, Linux driver, r7s72100.dtsi), they were just omitted from the
header file.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 include/dt-bindings/clock/r7s72100-clock.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/dt-bindings/clock/r7s72100-clock.h b/include/dt-bindings/clock/r7s72100-clock.h
index 7dd8bc0c3cd0..0dcb3e87d44c 100644
--- a/include/dt-bindings/clock/r7s72100-clock.h
+++ b/include/dt-bindings/clock/r7s72100-clock.h
@@ -11,6 +11,8 @@
 #define __DT_BINDINGS_CLOCK_R7S72100_H__
 
 #define R7S72100_CLK_PLL	0
+#define R7S72100_CLK_I		1
+#define R7S72100_CLK_G		2
 
 /* MSTP2 */
 #define R7S72100_CLK_CORESIGHT	0
-- 
2.11.0

[PATCH 41/42] ARM: dts: r7s72100: Add clock for CA9 CPU core

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Improve hardware description by adding a clock property to the device
node corresponding to the CA9 CPU core.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 4ed12a4d9d51..ab9645a42eca 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -203,6 +203,7 @@
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			clock-frequency = <400000000>;
+			clocks = <&cpg_clocks R7S72100_CLK_I>;
 			next-level-cache = <&L2>;
 		};
 	};
-- 
2.11.0

[PATCH 42/42] ARM: dts: r8a7743: Add xhci support to SoC dtsi

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add node for xhci. Boards DT files will enable it if needed.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7743.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 4db4f61be25a..7bbba4a36f31 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -932,6 +932,26 @@
 			status = "disabled";
 		};
 
+		/*
+		 * pci1 and xhci share the same phy, therefore only one of them
+		 * can be active at any one time. If both of them are enabled,
+		 * a race condition will determine who'll control the phy.
+		 * A firmware file is needed by the xhci driver in order for
+		 * USB 3.0 to work properly.
+		 */
+		xhci: usb at ee000000 {
+			compatible = "renesas,xhci-r8a7743",
+				     "renesas,rcar-gen2-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			phys = <&usb2 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		sdhi0: sd at ee100000 {
 			compatible = "renesas,sdhi-r8a7743";
 			reg = <0 0xee100000 0 0x328>;
-- 
2.11.0

[GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.15

[Arnd Bergmann]

On Fri, Oct 20, 2017 at 12:29 PM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these second round of Renesas ARM based SoC DT updates for
> v4.15.
>
> This pull request is based on the previous round of
> such requests, tagged as renesas-dt-for-v4.15,
> which you have already pulled.
>


Pulled into next/dt, thanks!

       Arnd