From: baruch@tkos.co.il (Baruch Siach)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/4] gpio: driver for the RPi3 GPIO expander
Date: Tue, 2 Jan 2018 15:19:17 +0200 [thread overview]
Message-ID: <cover.1514898134.git.baruch@tkos.co.il> (raw)
The Raspberry Pi 3 has a GPIO expander that controls, among others, the
activity LED, and the camera connector GPIOs. The GPIO expander on an I2C bus
that is not directly controlled from the ARM core. The VC4 firmware controls
the I2C bus, and allows the ARM core to set/get GPIO settings over its mailbox
interface.
This series adds support for the RPi3 expander.
The driver is ported from the downstream kernel at
https://github.com/raspberrypi/linux/, branch rpi-4.9.y.
Baruch Siach (3):
ARM: bcm2835: sync firmware properties with downstream
dt-bindings: gpio: add raspberry pi GPIO expander binding
ARM: dts: bcm2837-rpi-3-b: add GPIO expander
Dave Stevenson (1):
bcm2835-gpio-exp: Driver for GPIO expander via mailbox service
.../bindings/gpio/brcm,bcm2835-expgpio.txt | 24 ++
arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 10 +
drivers/gpio/Kconfig | 7 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-bcm-exp.c | 254 +++++++++++++++++++++
include/soc/bcm2835/raspberrypi-firmware.h | 18 ++
6 files changed, 314 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/brcm,bcm2835-expgpio.txt
create mode 100644 drivers/gpio/gpio-bcm-exp.c
--
2.15.1
next reply other threads:[~2018-01-02 13:19 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-02 13:19 Baruch Siach [this message]
2018-01-02 13:19 ` [PATCH 1/4] ARM: bcm2835: sync firmware properties with downstream Baruch Siach
2018-01-02 13:19 ` [PATCH 2/4] dt-bindings: gpio: add raspberry pi GPIO expander binding Baruch Siach
2018-01-02 18:26 ` Stefan Wahren
2018-01-04 19:35 ` Baruch Siach
2018-01-02 13:19 ` [PATCH 3/4] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service Baruch Siach
2018-01-02 18:49 ` Stefan Wahren
2018-01-09 13:41 ` Baruch Siach
2018-01-09 20:15 ` Stefan Wahren
2018-01-03 10:08 ` Linus Walleij
2018-01-10 3:45 ` Baruch Siach
2018-01-11 9:39 ` Linus Walleij
2018-01-02 13:19 ` [PATCH 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander Baruch Siach
2018-01-02 19:03 ` Stefan Wahren
2018-01-03 20:17 ` Stefan Wahren
2018-01-03 20:29 ` Phil Elwell
2018-01-04 3:06 ` Peter Robinson
2018-01-02 18:05 ` [PATCH 0/4] gpio: driver for the RPi3 " Stefan Wahren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1514898134.git.baruch@tkos.co.il \
--to=baruch@tkos.co.il \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).