* [PATCH 1/5] arm: zynq: Add Xilinx cc108 board
2018-01-17 14:41 [PATCH 0/5] arm: zynq: Adding new Xilinx boards Michal Simek
@ 2018-01-17 14:41 ` Michal Simek
2018-01-17 14:41 ` [PATCH 2/5] arm: zynq: Add support for Xilinx zc770 xm010 dc1 board Michal Simek
` (3 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Michal Simek @ 2018-01-17 14:41 UTC (permalink / raw)
To: linux-arm-kernel
The board contains 7z010 with 512MB memory, ethernet, qspi, uart, usbs
and sd. But board is not supporting booting from sd card.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/zynq-cc108.dts | 75 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 76 insertions(+)
create mode 100644 arch/arm/boot/dts/zynq-cc108.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9caf21..679cd258bc1f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1036,6 +1036,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
wm8750-apc8750.dtb \
wm8850-w70v2.dtb
dtb-$(CONFIG_ARCH_ZYNQ) += \
+ zynq-cc108.dtb \
zynq-microzed.dtb \
zynq-parallella.dtb \
zynq-zc702.dtb \
diff --git a/arch/arm/boot/dts/zynq-cc108.dts b/arch/arm/boot/dts/zynq-cc108.dts
new file mode 100644
index 000000000000..1a0f631c1d8d
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-cc108.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx CC108 board DTS
+ *
+ * (C) Copyright 2007-2018 Xilinx, Inc.
+ * (C) Copyright 2007-2013 Michal Simek
+ * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000";
+ model = "Xilinx Zynq";
+
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x20000000>;
+ };
+
+ usb_phy0: phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: phy1 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy>;
+
+ ethernet_phy: ethernet-phy at 1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&sdhci1 {
+ status = "okay";
+ broken-cd ;
+ wp-inverted ;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy1>;
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 2/5] arm: zynq: Add support for Xilinx zc770 xm010 dc1 board
2018-01-17 14:41 [PATCH 0/5] arm: zynq: Adding new Xilinx boards Michal Simek
2018-01-17 14:41 ` [PATCH 1/5] arm: zynq: Add Xilinx cc108 board Michal Simek
@ 2018-01-17 14:41 ` Michal Simek
2018-01-17 14:41 ` [PATCH 3/5] arm: zynq: Add support for Xilinx zc770 xm011 dc2 board Michal Simek
` (2 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Michal Simek @ 2018-01-17 14:41 UTC (permalink / raw)
To: linux-arm-kernel
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/zynq-zc770-xm010.dts | 92 ++++++++++++++++++++++++++++++++++
2 files changed, 93 insertions(+)
create mode 100644 arch/arm/boot/dts/zynq-zc770-xm010.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 679cd258bc1f..fa62546ebfb3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1041,6 +1041,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
zynq-parallella.dtb \
zynq-zc702.dtb \
zynq-zc706.dtb \
+ zynq-zc770-xm010.dtb \
zynq-zed.dtb \
zynq-zybo.dtb
dtb-$(CONFIG_MACH_ARMADA_370) += \
diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
new file mode 100644
index 000000000000..b1cfb4ede434
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM010 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
+ model = "Xilinx Zynq";
+
+ aliases {
+ ethernet0 = &gem0;
+ i2c0 = &i2c0;
+ serial0 = &uart1;
+ spi1 = &spi1;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ usb_phy0: phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy>;
+
+ ethernet_phy: ethernet-phy at 7 {
+ reg = <7>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom: eeprom at 52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+ flash at 0 {
+ compatible = "sst25wf080", "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition at test {
+ label = "spi-flash";
+ reg = <0x0 0x100000>;
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 3/5] arm: zynq: Add support for Xilinx zc770 xm011 dc2 board
2018-01-17 14:41 [PATCH 0/5] arm: zynq: Adding new Xilinx boards Michal Simek
2018-01-17 14:41 ` [PATCH 1/5] arm: zynq: Add Xilinx cc108 board Michal Simek
2018-01-17 14:41 ` [PATCH 2/5] arm: zynq: Add support for Xilinx zc770 xm010 dc1 board Michal Simek
@ 2018-01-17 14:41 ` Michal Simek
2018-01-17 14:41 ` [PATCH 4/5] arm: zynq: Add support for Xilinx zc770 xm012 dc3 board Michal Simek
2018-01-17 14:41 ` [PATCH 5/5] arm: zynq: Add support for Xilinx zc770 xm013 dc4 board Michal Simek
4 siblings, 0 replies; 7+ messages in thread
From: Michal Simek @ 2018-01-17 14:41 UTC (permalink / raw)
To: linux-arm-kernel
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, i2c, nand uart, spi and usb.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/zynq-zc770-xm011.dts | 64 ++++++++++++++++++++++++++++++++++
2 files changed, 65 insertions(+)
create mode 100644 arch/arm/boot/dts/zynq-zc770-xm011.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index fa62546ebfb3..7ed36eef2de0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1042,6 +1042,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
zynq-zc702.dtb \
zynq-zc706.dtb \
zynq-zc770-xm010.dtb \
+ zynq-zc770-xm011.dtb \
zynq-zed.dtb \
zynq-zybo.dtb
dtb-$(CONFIG_MACH_ARMADA_370) += \
diff --git a/arch/arm/boot/dts/zynq-zc770-xm011.dts b/arch/arm/boot/dts/zynq-zc770-xm011.dts
new file mode 100644
index 000000000000..b78883cee96a
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc770-xm011.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
+ model = "Xilinx Zynq";
+
+ aliases {
+ i2c0 = &i2c1;
+ serial0 = &uart1;
+ spi0 = &spi0;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ usb_phy1: phy1 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom: eeprom at 52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy1>;
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 4/5] arm: zynq: Add support for Xilinx zc770 xm012 dc3 board
2018-01-17 14:41 [PATCH 0/5] arm: zynq: Adding new Xilinx boards Michal Simek
` (2 preceding siblings ...)
2018-01-17 14:41 ` [PATCH 3/5] arm: zynq: Add support for Xilinx zc770 xm011 dc2 board Michal Simek
@ 2018-01-17 14:41 ` Michal Simek
2018-01-17 14:41 ` [PATCH 5/5] arm: zynq: Add support for Xilinx zc770 xm013 dc4 board Michal Simek
4 siblings, 0 replies; 7+ messages in thread
From: Michal Simek @ 2018-01-17 14:41 UTC (permalink / raw)
To: linux-arm-kernel
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, 2x i2c, nor flash, spi and uart.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/zynq-zc770-xm012.dts | 64 ++++++++++++++++++++++++++++++++++
2 files changed, 65 insertions(+)
create mode 100644 arch/arm/boot/dts/zynq-zc770-xm012.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7ed36eef2de0..6bd4b9a29511 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1043,6 +1043,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
zynq-zc706.dtb \
zynq-zc770-xm010.dtb \
zynq-zc770-xm011.dtb \
+ zynq-zc770-xm012.dtb \
zynq-zed.dtb \
zynq-zybo.dtb
dtb-$(CONFIG_MACH_ARMADA_370) += \
diff --git a/arch/arm/boot/dts/zynq-zc770-xm012.dts b/arch/arm/boot/dts/zynq-zc770-xm012.dts
new file mode 100644
index 000000000000..c3169d63600d
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc770-xm012.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM012 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
+ model = "Xilinx Zynq";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ serial0 = &uart1;
+ spi0 = &spi1;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom0: eeprom at 52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom1: eeprom at 52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+};
+
+&spi1 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+};
+
+&uart1 {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 5/5] arm: zynq: Add support for Xilinx zc770 xm013 dc4 board
2018-01-17 14:41 [PATCH 0/5] arm: zynq: Adding new Xilinx boards Michal Simek
` (3 preceding siblings ...)
2018-01-17 14:41 ` [PATCH 4/5] arm: zynq: Add support for Xilinx zc770 xm012 dc3 board Michal Simek
@ 2018-01-17 14:41 ` Michal Simek
2018-02-09 8:51 ` Michal Simek
4 siblings, 1 reply; 7+ messages in thread
From: Michal Simek @ 2018-01-17 14:41 UTC (permalink / raw)
To: linux-arm-kernel
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, ethernet, i2c, qspi, spi and uart.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/zynq-zc770-xm013.dts | 78 ++++++++++++++++++++++++++++++++++
2 files changed, 79 insertions(+)
create mode 100644 arch/arm/boot/dts/zynq-zc770-xm013.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6bd4b9a29511..44be37afa544 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1044,6 +1044,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
zynq-zc770-xm010.dtb \
zynq-zc770-xm011.dtb \
zynq-zc770-xm012.dtb \
+ zynq-zc770-xm013.dtb \
zynq-zed.dtb \
zynq-zybo.dtb
dtb-$(CONFIG_MACH_ARMADA_370) += \
diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
new file mode 100644
index 000000000000..ad3e1d108a9b
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
+ model = "Xilinx Zynq";
+
+ aliases {
+ ethernet0 = &gem1;
+ i2c0 = &i2c1;
+ serial0 = &uart0;
+ spi1 = &spi0;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+&gem1 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy>;
+
+ ethernet_phy: ethernet-phy at 7 {
+ reg = <7>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ si570: clock-generator at 55 {
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ temperature-stability = <50>;
+ reg = <0x55>;
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+ eeprom: at25 at 0 {
+ at25,byte-len = <8192>;
+ at25,addr-mode = <2>;
+ at25,page-size = <32>;
+
+ compatible = "atmel,at25";
+ reg = <2>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 5/5] arm: zynq: Add support for Xilinx zc770 xm013 dc4 board
2018-01-17 14:41 ` [PATCH 5/5] arm: zynq: Add support for Xilinx zc770 xm013 dc4 board Michal Simek
@ 2018-02-09 8:51 ` Michal Simek
0 siblings, 0 replies; 7+ messages in thread
From: Michal Simek @ 2018-02-09 8:51 UTC (permalink / raw)
To: linux-arm-kernel
On 17.1.2018 15:41, Michal Simek wrote:
> zc770 is based board which is extended by FMC/DC cards for SoC
> validation. FMCs/DCs are supposed to cover all SoC configurations.
> FMC/DC contains can, ethernet, i2c, qspi, spi and uart.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/zynq-zc770-xm013.dts | 78 ++++++++++++++++++++++++++++++++++
> 2 files changed, 79 insertions(+)
> create mode 100644 arch/arm/boot/dts/zynq-zc770-xm013.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 6bd4b9a29511..44be37afa544 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1044,6 +1044,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
> zynq-zc770-xm010.dtb \
> zynq-zc770-xm011.dtb \
> zynq-zc770-xm012.dtb \
> + zynq-zc770-xm013.dtb \
> zynq-zed.dtb \
> zynq-zybo.dtb
> dtb-$(CONFIG_MACH_ARMADA_370) += \
> diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
> new file mode 100644
> index 000000000000..ad3e1d108a9b
> --- /dev/null
> +++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
> @@ -0,0 +1,78 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Xilinx ZC770 XM013 board DTS
> + *
> + * Copyright (C) 2013 Xilinx, Inc.
> + */
> +/dts-v1/;
> +#include "zynq-7000.dtsi"
> +
> +/ {
> + compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
> + model = "Xilinx Zynq";
> +
> + aliases {
> + ethernet0 = &gem1;
> + i2c0 = &i2c1;
> + serial0 = &uart0;
> + spi1 = &spi0;
> + };
> +
> + chosen {
> + bootargs = "";
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x40000000>;
> + };
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> +&gem1 {
> + status = "okay";
> + phy-mode = "rgmii-id";
> + phy-handle = <ðernet_phy>;
> +
> + ethernet_phy: ethernet-phy at 7 {
> + reg = <7>;
> + device_type = "ethernet-phy";
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + si570: clock-generator at 55 {
> + #clock-cells = <0>;
> + compatible = "silabs,si570";
> + temperature-stability = <50>;
> + reg = <0x55>;
> + factory-fout = <156250000>;
> + clock-frequency = <148500000>;
> + };
> +};
> +
> +&spi0 {
> + status = "okay";
> + num-cs = <4>;
> + is-decoded-cs = <0>;
> + eeprom: at25 at 0 {
This should be probably eeprom: eeprom at 25.
Rob: Do you see any other issue with this series? Or can I apply?
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP SoCs
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180209/d007ce7a/attachment.sig>
^ permalink raw reply [flat|nested] 7+ messages in thread