[PATCH v5 0/7] thermal: tsens: Refactoring for TSENSv2 IP

[PATCH v5 0/7] thermal: tsens: Refactoring for TSENSv2 IP

[Amit Kucheria]

This series is a mixed bag:
- Some code moves to allow code sharing between different SoCs with v2 of
  the TSENS IP,
- a generic qcom,tsens-v2 property as a fallback compatible for all v2.x.y
  platforms,
- new platform support (sdm845)
- a cleanup patch and
- a DT change to have a common way to deal with the SROT and TM registers
  despite slightly different features across the IP family and different
  register offsets.

Changes since v4:
- Revert back to a single fallback bindind qcom,tsens-v2 as per Rob's
  suggestion.
- Rework how old (unsplit SROT and TM address space) DTs are handled by
  needing a 0x1000 offset but still sharing common code in tsens-v2.c
- Remove the patch to added TRDY checks while we investigate Matthias'
  reports
- Fix unit addressses for the two tsens blocks as per Stephen's comment.

Changes since v3:
- Introduce qcom,tsens-v2.4.0 property and make qcom,tsens-v2 a
  fallback, compatible property.
- Rename ops_v2 to ops_generic_v2

Changes since v2:

- Based on review, moved tsens-8996.c to tsens-v2.c and changed
  corresponding function names, struct names to allow for generic tsensv2
  platforms
- All v2 platforms will now only need to use the qcom,tsen-v2
  property
- Added a DT patch to initialize tsens driver on sdm845, now that
  4.18-rc1 will contain an sdm845.dtsi

Changes since v1:
- Move get_temp() from tsens-8996 to tsens-common and rename
- Change 8996 DT entry to allow init_common() to work across
  sdm845 and 8996 due to different offsets

Amit Kucheria (7):
  thermal: tsens: Get rid of unused fields in structure
  thermal: tsens: Add support to split up register address space into
    two
  dt: qcom: 8996: thermal: Move to DT initialisation
  thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse
  thermal: tsens: Add generic support for TSENS v2 IP
  dt: thermal: tsens: Document the fallback DT property for v2 of TSENS
    IP
  arm64: dts: sdm845: Add tsens nodes

 .../devicetree/bindings/thermal/qcom-tsens.txt     | 25 +++++++++++++----
 arch/arm64/boot/dts/qcom/msm8996.dtsi              | 12 +++++++-
 arch/arm64/boot/dts/qcom/sdm845.dtsi               | 16 +++++++++++
 drivers/thermal/qcom/Makefile                      |  2 +-
 drivers/thermal/qcom/tsens-common.c                | 11 ++++++++
 drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c}  | 32 ++++++++++------------
 drivers/thermal/qcom/tsens.c                       |  3 ++
 drivers/thermal/qcom/tsens.h                       |  8 ++++--
 8 files changed, 81 insertions(+), 28 deletions(-)
 rename drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c} (64%)

-- 
2.7.4

[PATCH v5 3/7] dt: qcom: 8996: thermal: Move to DT initialisation

[Amit Kucheria]

We also split up the regmap address space into two, one for the TM
registers, the other for the SROT registers. This was required to deal with
different address offsets for the TM and SROT registers across different
SoC families.

Since tsens-common.c/init_common() currently only registers one address
space, the order is important (TM before SROT). This is OK since the code
doesn't really use the SROT functionality yet.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8c7f9ca..6c8a857 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -461,7 +461,17 @@
 
 		tsens0: thermal-sensor at 4a8000 {
 			compatible = "qcom,msm8996-tsens";
-			reg = <0x4a8000 0x2000>;
+			reg = <0x4a9000 0x1000>, /* TM */
+			      <0x4a8000 0x1000>; /* SROT */
+			#qcom,sensors = <13>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor at 4ac000 {
+			compatible = "qcom,msm8996-tsens";
+			reg = <0x4ad000 0x1000>, /* TM */
+			      <0x4ac000 0x1000>; /* SROT */
+			#qcom,sensors = <8>;
 			#thermal-sensor-cells = <1>;
 		};
 
-- 
2.7.4

[PATCH v5 7/7] arm64: dts: sdm845: Add tsens nodes

[Amit Kucheria]

SDM845 has two tsens blocks, one with 13 sensors and the other with 8
sensors. It uses version 2 of the TSENS IP, so use the fallback property to
allow more common code.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index cdaabeb..d97ee00 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -221,6 +221,22 @@
 			#interrupt-cells = <2>;
 		};
 
+		tsens0: tsens at c222000 {
+			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+			reg = <0xc263000 0x1ff>, /* TM */
+			      <0xc222000 0x1ff>; /* SROT */
+			#qcom,sensors = <13>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: tsens at c223000 {
+			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+			reg = <0xc265000 0x1ff>, /* TM */
+			      <0xc223000 0x1ff>; /* SROT */
+			#qcom,sensors = <8>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		spmi_bus: spmi at c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xc440000 0x1100>,
-- 
2.7.4

[PATCH v5 7/7] arm64: dts: sdm845: Add tsens nodes

[Amit Kucheria]

On Mon, Jul 9, 2018 at 4:57 PM, Amit Kucheria <amit.kucheria@linaro.org> wrote:
> SDM845 has two tsens blocks, one with 13 sensors and the other with 8
> sensors. It uses version 2 of the TSENS IP, so use the fallback property to
> allow more common code.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index cdaabeb..d97ee00 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -221,6 +221,22 @@
>                         #interrupt-cells = <2>;
>                 };
>
> +               tsens0: tsens at c222000 {

Oops, sending out v6 to fix this.

> +                       compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> +                       reg = <0xc263000 0x1ff>, /* TM */
> +                             <0xc222000 0x1ff>; /* SROT */
> +                       #qcom,sensors = <13>;
> +                       #thermal-sensor-cells = <1>;
> +               };
> +
> +               tsens1: tsens at c223000 {
> +                       compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> +                       reg = <0xc265000 0x1ff>, /* TM */
> +                             <0xc223000 0x1ff>; /* SROT */
> +                       #qcom,sensors = <8>;
> +                       #thermal-sensor-cells = <1>;
> +               };
> +
>                 spmi_bus: spmi at c440000 {
>                         compatible = "qcom,spmi-pmic-arb";
>                         reg = <0xc440000 0x1100>,
> --
> 2.7.4
>