From: Christian Lamparter <chunkeey@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: "Florian Fainelli" <f.fainelli@gmail.com>,
"Scott Branden" <scott.branden@broadcom.com>,
"Hauke Mehrtens" <hauke@hauke-m.de>,
"Rafał Miłecki" <zajec5@gmail.com>,
"Chris Blake" <chrisrblake93@gmail.com>,
"Rob Herring" <robh+dt@kernel.org>,
bcm-kernel-feedback-list@broadcom.com,
"Ray Jui" <ray.jui@broadcom.com>
Subject: [PATCH v2 0/6] ARM: BCM5301X: add Meraki MR32 series
Date: Sat, 22 Aug 2020 18:19:17 +0200 [thread overview]
Message-ID: <cover.1598111680.git.chunkeey@gmail.com> (raw)
Hello,
I've been holding on to this devices dts' for a while now.
But since the HW has been running with versions of these
patches for more than a year, I do think I should make it
available in upstream in order to move on.
Hardware-Info of the Meraki MR32:
This is a dual-band enterprise class 802.11ac access point.
The unit was donated by Chris Blake. Thank you!
SoC: Broadcom BCM53016A1 (1 GHz, 2 cores)
RAM: 128 MiB
NAND: 128 MiB Spansion S34ML01G2 (~114 MiB useable)
ETH: 1GBit Ethernet Port - PoE
WIFI1: Broadcom BCM43520 an+ac (2x2:2 - id: 0x4352)
WIFI2: Broadcom BCM43520 bgn (2x2:2 - id: 0x4352)
WIFI3: Broadcom BCM43428 abgn (1x1:1 - id: 43428)
So far, the remaining TODOs center around the pinctrl,
i2c and WIFI. The I2C is implemented with the bit-banged
i2c-gpio driver as the SoC's I2C didn't budge after
many hours of trying.
A patch that included the "meraki" vendor-prefix has
been broken out of the series as recommended by
Florian Fainelli. Here's the link:
<https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-August/216949.html>
Cheers,
Christian
Christian Lamparter (6):
dt-bindings: ARM: add bindings for the Meraki MR32
ARM: dts: BCM5301X: Specify PWM in the DT
ARM: dts: BCM5301X: Specify uart2 in the DT
ARM: dts: BCM5301X: Specify pcie2 in the DT
MAINTAINERS: extend BCM5301X ARM ARCHITECTURE files
ARM: BCM5301X: Add DT for Meraki MR32
.../bindings/arm/bcm/brcm,bcm4708.yaml | 2 +
MAINTAINERS | 2 +-
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 219 ++++++++++++++++++
arch/arm/boot/dts/bcm5301x.dtsi | 25 +-
5 files changed, 246 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm53016-meraki-mr32.dts
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-08-22 16:21 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-22 16:19 Christian Lamparter [this message]
2020-08-22 16:19 ` [PATCH v2 1/6] dt-bindings: ARM: add bindings for the Meraki MR32 Christian Lamparter
2020-08-27 0:02 ` Florian Fainelli
2020-08-22 16:19 ` [PATCH v2 2/6] ARM: dts: BCM5301X: Specify PWM in the DT Christian Lamparter
2020-08-27 0:02 ` Florian Fainelli
2020-08-22 16:19 ` [PATCH v2 3/6] ARM: dts: BCM5301X: Specify uart2 " Christian Lamparter
2020-08-27 0:02 ` Florian Fainelli
2020-08-22 16:19 ` [PATCH v2 4/6] ARM: dts: BCM5301X: Specify pcie2 " Christian Lamparter
2020-08-27 0:03 ` Florian Fainelli
2020-08-22 16:19 ` [PATCH v2 5/6] MAINTAINERS: extend BCM5301X ARM ARCHITECTURE files Christian Lamparter
2020-08-27 0:03 ` Florian Fainelli
2020-08-22 16:19 ` [PATCH v2 6/6] ARM: BCM5301X: Add DT for Meraki MR32 Christian Lamparter
2020-08-27 0:03 ` Florian Fainelli
2020-09-10 20:38 ` Florian Fainelli
2020-09-11 17:27 ` Christian Lamparter
2020-09-11 17:30 ` Florian Fainelli
2020-08-27 0:04 ` [PATCH v2 0/6] ARM: BCM5301X: add Meraki MR32 series Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1598111680.git.chunkeey@gmail.com \
--to=chunkeey@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=chrisrblake93@gmail.com \
--cc=f.fainelli@gmail.com \
--cc=hauke@hauke-m.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=ray.jui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=scott.branden@broadcom.com \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).