[PATCH 00/10] Add USB support for Hikey 970

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Rob Herring <robh@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Arnd Bergmann <arnd@arndb.de>,
	Manivannan Sadhasivam <mani@kernel.org>,
	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Dragan Cvetic <dragan.cvetic@xilinx.com>,
	Yu Chen <chenyu56@huawei.com>,
	linuxarm@huawei.com, Krzysztof Kozlowski <krzk@kernel.org>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	John Stultz <john.stultz@linaro.org>,
	Wei Xu <xuwei5@hisilicon.com>,
	mauro.chehab@huawei.com, Derek Kiernan <derek.kiernan@xilinx.com>,
	"David S. Miller" <davem@davemloft.net>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/10] Add USB support for Hikey 970
Date: Tue,  8 Sep 2020 12:28:34 +0200	[thread overview]
Message-ID: <cover.1599559318.git.mchehab+huawei@kernel.org> (raw)

This series adds the phy layer needed by Kirin 970 SoC.

It also adds a GPIO USB3 HUB driver, that is meant to support
the HUB which comes inside with HiKey 960 and 970 designs.

The hub used on Hikey 970 is this one:
	Bus 002 Device 002: ID 0451:8140 Texas Instruments, Inc. TUSB8041 4-Port Hub

While it supports I2C, the driver for it just enables it, depending
on the OTG mode.

v3:
- fixes a problem on the past series, where some changes went
  to the wrong patch;
- adds DTS and dt-bindinds required for Hikey 970 USB to work.

For the dt-bindings to work properly, two patches already sent
are required:
   - a patch adding Hikey 970 to dwg3-of-simple driver;
   - a quirks patch for dwc3, which is required for usbhid to work.
    funny enough, such patch is not required by USB sticks.
    I suspect that it affects only INT URB packets, but didn't
    made any tests.

Mauro Carvalho Chehab (7):
  phy: hisilicon: phy-hi3670-usb3: use a consistent namespace
  phy: hisilicon: phy-hi3670-usb3: fix coding style
  phy: hisilicon: phy-hi3670-usb3: change some DT properties
  dt-bindings: phy: convert phy-kirin970-usb3.txt to yaml
  MAINTAINERS: add myself as maintainer for Kirin 970 USB PHY
  misc: hisi_hikey_usb: add support for Hikey 970
  dts: hisilicon: add support for USB3 on Hikey 970

Yu Chen (3):
  phy: hisilicon: add USB physical layer for Kirin 3670
  phy: hisilicon: phy-hi3670-usb3: fix some issues at the init code
  misc: hisi_hikey_usb: Driver to support onboard USB gpio hub on
    Hikey960

 .../bindings/phy/hisilicon,hi3670-usb3.yaml   |  72 ++
 MAINTAINERS                                   |  16 +-
 .../boot/dts/hisilicon/hi3670-hikey970.dts    | 102 +++
 arch/arm64/boot/dts/hisilicon/hi3670.dtsi     |  58 ++
 drivers/misc/Kconfig                          |   9 +
 drivers/misc/Makefile                         |   1 +
 drivers/misc/hisi_hikey_usb.c                 | 274 +++++++
 drivers/phy/hisilicon/Kconfig                 |  10 +
 drivers/phy/hisilicon/Makefile                |   1 +
 drivers/phy/hisilicon/phy-hi3670-usb3.c       | 671 ++++++++++++++++++
 10 files changed, 1213 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
 create mode 100644 drivers/misc/hisi_hikey_usb.c
 create mode 100644 drivers/phy/hisilicon/phy-hi3670-usb3.c

-- 
2.26.2

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel