From: Geert Uytterhoeven <geert+renesas@glider.be>
To: arm-soc <arm@kernel.org>, soc <soc@kernel.org>
Cc: Magnus Damm <magnus.damm@gmail.com>,
linux-arm-kernel@lists.infradead.org,
linux-renesas-soc@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [GIT PULL 5/5] Renesas DTS updates for v6.7
Date: Fri, 29 Sep 2023 13:10:15 +0200 [thread overview]
Message-ID: <cover.1695985427.git.geert+renesas@glider.be> (raw)
In-Reply-To: <cover.1695985418.git.geert+renesas@glider.be>
The following changes since commit 0bb80ecc33a8fb5a682236443c1e740d5c917d1d:
Linux 6.6-rc1 (2023-09-10 16:28:41 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git tags/renesas-dts-for-v6.7-tag1
for you to fetch changes up to d70be079c3cf34bd91e1c8f7b4bc760356c9150c:
arm64: dts: renesas: ulcb/kf: Use multi Component sound (2023-09-25 09:25:04 +0200)
----------------------------------------------------------------
Renesas DTS updates for v6.7
- Add PCIe Host and Endpoint support for the R-Car S4-8 SoC and the
Renesas Spider development board,
- Add FLASH support for the Renesas Genmai and RSK+RZA1 development
boards,
- Add multi Component sound support for Renesas ULCB development
boards equipped with the Shimafuji Kingfisher extension,
- Miscellaneous fixes and improvements.
----------------------------------------------------------------
Geert Uytterhoeven (12):
ARM: dts: renesas: blanche: Fix typo in GP_11_2 pin name
ARM: dts: renesas: ape6evm: Drop bogus "mtd-rom" compatible value
ARM: dts: renesas: gr-peach: Remove unneeded probe-type property
ARM: dts: renesas: Remove unused LBSC nodes from board DTS
ARM: dts: renesas: r7s72100: Add BSC node
ARM: dts: renesas: r8a7779: Add LBSC node
ARM: dts: renesas: r8a7792: Add LBSC node
ARM: dts: renesas: marzen: Move Ethernet node to LBSC
ARM: dts: renesas: blanche: Move Ethernet node to LBSC
ARM: dts: renesas: wheat: Move Ethernet node to LBSC
ARM: dts: renesas: genmai: Add FLASH nodes
ARM: dts: renesas: rskrza1: Add FLASH nodes
Kuninori Morimoto (2):
arm64: dts: renesas: Handle ADG bit for sound clk_i
arm64: dts: renesas: ulcb/kf: Use multi Component sound
Yoshihiro Shimoda (2):
arm64: dts: renesas: r8a779f0: Add PCIe Host and Endpoint nodes
arm64: dts: renesas: r8a779f0: spider: Enable PCIe Host ch0
arch/arm/boot/dts/renesas/r7s72100-genmai.dts | 82 ++++++++++-
arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts | 6 -
arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts | 71 +++++++++-
arch/arm/boot/dts/renesas/r7s72100.dtsi | 7 +
arch/arm/boot/dts/renesas/r7s9210-rza2mevb.dts | 5 -
arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts | 2 +-
arch/arm/boot/dts/renesas/r8a7779-marzen.dts | 32 +++--
arch/arm/boot/dts/renesas/r8a7779.dtsi | 7 +
arch/arm/boot/dts/renesas/r8a7790-lager.dts | 5 -
arch/arm/boot/dts/renesas/r8a7791-koelsch.dts | 5 -
arch/arm/boot/dts/renesas/r8a7792-blanche.dts | 34 ++---
arch/arm/boot/dts/renesas/r8a7792-wheat.dts | 34 ++---
arch/arm/boot/dts/renesas/r8a7792.dtsi | 7 +
arch/arm/boot/dts/renesas/r8a7794-alt.dts | 5 -
.../boot/dts/renesas/beacon-renesom-baseboard.dtsi | 2 +-
arch/arm64/boot/dts/renesas/hihope-rev4.dtsi | 2 +-
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 4 +-
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 4 +-
arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 2 +-
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 4 +-
arch/arm64/boot/dts/renesas/r8a77951.dtsi | 4 +-
arch/arm64/boot/dts/renesas/r8a77960.dtsi | 4 +-
arch/arm64/boot/dts/renesas/r8a77961.dtsi | 4 +-
arch/arm64/boot/dts/renesas/r8a77965.dtsi | 4 +-
arch/arm64/boot/dts/renesas/r8a77990.dtsi | 2 +-
arch/arm64/boot/dts/renesas/r8a77995.dtsi | 2 +-
.../boot/dts/renesas/r8a779f0-spider-cpu.dtsi | 24 ++++
arch/arm64/boot/dts/renesas/r8a779f0.dtsi | 134 ++++++++++++++++++
arch/arm64/boot/dts/renesas/salvator-common.dtsi | 2 +-
.../renesas/ulcb-audio-graph-card-mix+split.dtsi | 16 ++-
.../boot/dts/renesas/ulcb-audio-graph-card.dtsi | 17 ++-
.../renesas/ulcb-audio-graph-card2-mix+split.dtsi | 13 +-
.../boot/dts/renesas/ulcb-audio-graph-card2.dtsi | 4 +-
.../ulcb-kf-audio-graph-card-mix+split.dtsi | 57 ++++----
.../boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi | 27 ++--
.../ulcb-kf-audio-graph-card2-mix+split.dtsi | 108 ++++++++-------
.../dts/renesas/ulcb-kf-audio-graph-card2.dtsi | 14 +-
.../ulcb-kf-simple-audio-card-mix+split.dtsi | 152 +++++++++++----------
.../dts/renesas/ulcb-kf-simple-audio-card.dtsi | 77 ++++++-----
.../renesas/ulcb-simple-audio-card-mix+split.dtsi | 8 +-
.../boot/dts/renesas/ulcb-simple-audio-card.dtsi | 8 +-
arch/arm64/boot/dts/renesas/ulcb.dtsi | 2 +-
42 files changed, 664 insertions(+), 339 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2023-09-29 11:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-29 11:10 [GIT PULL 0/5] Renesas SoC updates for v6.7 Geert Uytterhoeven
2023-09-29 11:10 ` [GIT PULL 1/5] Renesas ARM defconfig " Geert Uytterhoeven
2023-09-29 11:10 ` [GIT PULL 2/5] Renesas ARM SoC " Geert Uytterhoeven
2023-09-29 11:10 ` [GIT PULL 3/5] Renesas driver " Geert Uytterhoeven
2023-09-29 11:10 ` [GIT PULL 4/5] Renesas DT binding " Geert Uytterhoeven
2023-09-29 11:10 ` Geert Uytterhoeven [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1695985427.git.geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=arm@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).