From: Furong Xu <0x1207@gmail.com>
To: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Vladimir Oltean <olteanv@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
Simon Horman <horms@kernel.org>,
andrew+netdev@lunn.ch,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <joabreu@synopsys.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
xfr@outlook.com, Furong Xu <0x1207@gmail.com>
Subject: [PATCH net-next v5 0/6] net: stmmac: Refactor FPE as a separate module
Date: Mon, 28 Oct 2024 11:07:23 +0800 [thread overview]
Message-ID: <cover.1730084449.git.0x1207@gmail.com> (raw)
Refactor FPE implementation by moving common code for DWMAC4 and
DWXGMAC into a separate FPE module.
FPE implementation for DWMAC4 and DWXGMAC differs only for:
1) Offset address of MAC_FPE_CTRL_STS and MTL_FPE_CTRL_STS
2) FPRQ(Frame Preemption Residue Queue) field in MAC_RxQ_Ctrl1
3) Bit offset of Frame Preemption Interrupt Enable
Tested on DWMAC CORE 5.20a and DWXGMAC CORE 3.20a
Changes in v5:
1. Fix build errors reported by kernel test robot:
https://lore.kernel.org/oe-kbuild-all/202410260025.sME33DwY-lkp@intel.com/
Changes in v4:
1. Update FPE IRQ handling
2. Check fpesel bit and stmmac_fpe_reg pointer to guarantee that driver
does not crash on a certain platform that FPE is to be implemented
Changes in v3:
1. Drop stmmac_fpe_ops and refactor FPE functions to generic version to
avoid function pointers
2. Drop the _SHIFT macro definitions
Changes in v2:
1. Split patches to easily review
2. Use struct as function param to keep param list short
3. Typo fixes in commit message and title
Furong Xu (6):
net: stmmac: Introduce separate files for FPE implementation
net: stmmac: Rework macro definitions for gmac4 and xgmac
net: stmmac: Refactor FPE functions to generic version
net: stmmac: xgmac: Rename XGMAC_RQ to XGMAC_FPRQ
net: stmmac: xgmac: Complete FPE support
net: stmmac: xgmac: Enable FPE for tc-mqprio/tc-taprio
drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +-
drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 1 -
.../net/ethernet/stmicro/stmmac/dwmac4_core.c | 11 +-
drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 150 -------
drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 26 --
.../net/ethernet/stmicro/stmmac/dwxgmac2.h | 6 +-
.../ethernet/stmicro/stmmac/dwxgmac2_core.c | 31 +-
drivers/net/ethernet/stmicro/stmmac/hwif.c | 7 +
drivers/net/ethernet/stmicro/stmmac/hwif.h | 20 +-
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 11 +-
.../ethernet/stmicro/stmmac/stmmac_ethtool.c | 6 +-
.../net/ethernet/stmicro/stmmac/stmmac_fpe.c | 412 ++++++++++++++++++
.../net/ethernet/stmicro/stmmac/stmmac_fpe.h | 44 ++
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 157 +------
.../net/ethernet/stmicro/stmmac/stmmac_tc.c | 4 +-
15 files changed, 481 insertions(+), 407 deletions(-)
create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c
create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h
--
2.34.1
next reply other threads:[~2024-10-28 3:26 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-28 3:07 Furong Xu [this message]
2024-10-28 3:07 ` [PATCH net-next v5 1/6] net: stmmac: Introduce separate files for FPE implementation Furong Xu
2024-10-28 3:07 ` [PATCH net-next v5 2/6] net: stmmac: Rework macro definitions for gmac4 and xgmac Furong Xu
2024-10-28 3:07 ` [PATCH net-next v5 3/6] net: stmmac: Refactor FPE functions to generic version Furong Xu
2024-10-29 18:52 ` Vladimir Oltean
2024-10-30 2:29 ` Furong Xu
2024-10-28 3:07 ` [PATCH net-next v5 4/6] net: stmmac: xgmac: Rename XGMAC_RQ to XGMAC_FPRQ Furong Xu
2024-10-28 3:07 ` [PATCH net-next v5 5/6] net: stmmac: xgmac: Complete FPE support Furong Xu
2024-10-28 3:07 ` [PATCH net-next v5 6/6] net: stmmac: xgmac: Enable FPE for tc-mqprio/tc-taprio Furong Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1730084449.git.0x1207@gmail.com \
--to=0x1207@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=xfr@outlook.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).